Standard deviation zones Support & Resistance [LM]Hi Guy,
I would like to introduce you Standard deviation zones Support & Resistance horizontals. It draws line horizontals on high and low st dev zone. The colors are dynamic depending whether price is below or above the line.
Credit is due to @Zeiierman for st dev zone calculation so shout out to him.
There are various sections in setting:
general setting where you can select source for zone calculation
tops setting
bottom setting
show and hide section of the first timeframe
show and hide section of the second timeframe
Be aware that when new zone starts and is not finished yet than the top will trail the high of unfinished zone that could be also at the high of current candle and next candle it can change
Any suggestions are welcomed
Resistances
SR Levels - Major Support and Resistance LevelsHello Traders!
This Indicator helps you to identify Major support and resistance level. Major Vibration numbers are working as support & resistance in the many scripts as I have seen. Since I have my research about the vibration numbers, I strongly believe these numbers are works as good Support & Resistance. This is just try to idendify the those number to enter into the trade. Use Other indicators to Identify Trend and for your support!
When Price move low to high:
1) Green Line works are buy entry point, TP area is Red Line, SL area also Red Just below the Green Line
When Price Move High to Low:
1) Red Lines are works as Sell entry point, TP are Green Line, SL area also Green Lines just above the Red Line.
Notes: This Indicators is mainly focus the script which more than 5 digit scripts. Example above 10000 price scripts only.. for Intraday. below 10000 or 1000 scripts also works but for long term not for intraday...
NSE:BANKNIFTY
Tel Aviv LevelsSimple script that calculates static support/resistance levels for potential price reversals using a calculation for predicting liquidity from a base price, use in confluence with other technical analysis tools.
DM me on tradingview for access.
PT TMA BandsVersion 1.0 of our TMA Bands is a visual of areas of interest. The purpose of this indicator is to determine where the price will likely bounce or reject. When an asset is ranging, it very well respects the neutral (middle) zone. The highest RR trade setups are when the price goes from one end of the bands to another.
The bands included are of an ATR multiplier based on multiple moving averages. Each moving average has a unique feature that offers a high probability reaction when price gravitates towards it. We have color-coordinated the bands into three zones. The Main zone being the middle area where the asset tends to play ping pong & range, Top zone, which offers the best RR for shorts & the bottom zone, which provides the best RR for longs.
Strategy:
When scalping or swinging, always look for shorts close to the red zone as possible with a stop loss above the red band. When longing, always look for longs close to the green zone area with a stop loss below the green band. Anything in orange is a neutral zone, which will confirm the asset is more than likely ranging. I don’t advise taking trades in that zone unless you have solid risk management. When playing the macros, H12+ always look for price to find support at the orange (middle) band before deciding on a shift in trend. If the asset breaks down from the orange (middle) band, you usually get a retest of that band before further downside. Also, something to consider, if you punt longs at the green zone, you want to target the orange (middle) band. If you punt shorts at the red zone, you want to target the orange (middle) band. I usually take 70% off at the middle band & let the rest run if ultimately end up in the opposite zone.
This Oscillator is best with the buy/sell signals we provide. It offers extra confluence with stop loss & targets. I enjoy using it on all time frames for swinging & scalping. It is included as part of the library. Just message us for access!
Freedom of MovementFreedom of Movement Indicator
---------------------------------------------------------
In “Evidence-Based Support & Resistance” article, author Melvin Dickover introduces two new indicators to help traders note support and resistance areas by identifying supply and demand pools. Here you can find the support-resistance technical indicator called "Freedom of Movement".
The indicator takes into account price-volume behavior in order to detect points where movement of price is suddenly restricted, the possible supply and demand pools. These points are also marked by Defended Price Lines (DPLs).
DPLs are horizontal lines that run across the chart at levels defined by following conditions:
* Overlapping bars: If the indicator spike (i.e., indicator is above 2.0 or a custom value) corresponds to a price bar overlapping the previous one, the previous close can be used as the DPL value.
* Very large bars: If the indicator spike corresponds to a price bar of a large size, use its close price as the DPL value.
* Gapping bars: If the indicator spike corresponds to a price bar gapping from the previous bar, the DPL value will depend on the gap size. Small gaps can be ignored: the author suggests using the previous close as the DPL value. When the gap is big, the close of the latter bar is used instead.
* Clustering spikes: If the indicator spikes come in clusters, use the extreme close or open price of the bar corresponding to the last or next to last spike in cluster.
DPLs can be used as support and resistance levels. In order confirm and refine them, FoM (Freedom of Movement) is used along with the Relative Volume Indicator (RVI), which you can find here:
Clustering spikes provide the strongest DPLs while isolated spikes can be used to confirm and refine those provided by the RVI. Coincidence of spikes of the two indicator can be considered a sign of greater strength of the DPL.
More info:
S&C magazine, April 2014.
Resistances and supports based on simplified Volume ProfileThis study tries to highlight support and resistances
as they are defined by
TradingLatino TradingView user
His definition is based on volume peaks
on the official TradingView Volume Profile
indicator that seem rather big on size.
As a bonus it also serves as a rather simple volume profile indicator.
As you can see it only show last blocks volume profile.
It's aimed at BTCUSDT pair and 4h timeframe.
HOW IT WORKS
HOW IT WORKS - Recent Profile Block
It gathers volume from the last 100 Bars
in order to draw the recent profile block
Volume that intersects with current level range
being studied is added to its value.
Additionally the current level price is modified
so that it matches the level price where most
of the volume has concentrated
So you get a pretty accurate way of the volume
while at the same time the level are not stuck
to arbitrary level prices.
HOW IT WORKS - Resistances and Supports
It calculates the level which its price it's
nearer (from below) to the current price level
Resistance is found steping up (from current prive level)
level by level
till you find a level which its value
is higher than the previous level value.
Support is found steping down (from current prive level)
level by level
till you find a level which its value
is higher than the previous level value.
That way you ignore rather small
resistances and support values.
Finally the resistances and supports are drawn next to the recent profile block
so that you can look at them with ease.
If you hover over the label you can double check if you are looking at
current price, resistance or support levels.
SETTINGS
Bars in recent profile block : How many previous period volumes are used to calculate the recent profile block
Row width multiplier : Adjust how big the recent profile block seems to be
Resistances prices number of decimal digits : How many digits is shown at the resistance and support level prices.
WARNING
Please be aware that depending on your security and timeframe you might need to modify the
'Bars in recent profile block' setting so that the study does not timeout.
USAGE
If your strategy calculates take profit
limits on higher resistances based
on volume you could use this indicator
resistance detector
FEEDBACK 1
This is my first volume indicator.
I suppose that each trader
has his own approach on defining
resistances and supports.
I'm interested on knowing if the default way
this resistances and supports are calculated
matches what other traders would have
highlighted manually on the chart.
FEEDBACK 2
I have only used this identifier in BTCUSDT 4h timeframe.
I'm interested to know what needs to be tweaked
in other securities and timeframes.
PINE STUDY TRICK
This study let's you choose the number of decimals the label will use.
CREDITS
I have reused and adapted some code from
'Poor man's volume profile' study
which it's from TradingView IldarAkhmetgaleev user.
I also wanted to thank him for helping me understanding his study.
True Strong Classical Support/Resistance LevelsThis script is based on the approach of filtering signals by checking higher timeframes.
So basically setting higher numbers in "Strength Of Levels" option, will make the indicator check for support and/or resistance levels in timeframes higher than the current.
Unfortunately, I was forced to still use inefficient built-in functions pivothigh() and pivotlow(). I hope they fix them up soon!
I'm looking for any opinion about the idea and if you like any of my scripts, anything you send means a lot to me.
This script is published for the third time because of some moderators absurd behavior.
But thank heavens, the code is now more clean and of course the option "Strength Of Levels" accepts float numbers.
[PX] Session LevelHello guys,
this scripts prints the high and low as well as the moving average of a user-defined session.
How does it work?
Basically, as soon as we are in the session range, the indicator will constantly keep track of the high and the low of this range. It also prints the moving average, which can either be a floating or a static line, that represents the latest MA value.
The indicator comes with multiple options to style the printed lines.
If you find this indicator useful, please leave a "like" and hit that "follow" button :)
Have fun and happy trading :)))
P.S: Check my signature if you want to get in touch with me.
Kitsune's Long/Short Support v1.0.0After reviewing all feedback and questions I got from the users of my previously published script (Kitsune Indicator Collection), I decided to publish a new one which is easier to interpret and use. Therefore the script is as clean as possible thereby minimizing visual clutter (or at least I tried ).
This script is an evolution of my precious script and is still a combination of the following items:
- High-Low detector
- Parabolic SAR (Stop and Reversal) setups and triggers
- Ehlers Instantaneous Trendline (EIT) indicator
- Range detector
- Support and Resistance detector
- Daily/Weekly/Monthly open visualization
The script uses the SAR and EIT to detect long/short signals.
-----------------------------------------------------------------------------------------------------------------------------------------------
A signal is decided to be STRONG when SAR trigger coincides with trend reversal of the EIT.
A STRONG long signal is painted (i.e. blue label with L+) when:
- SAR long trigger (blue arrow) coincides with an EIT crossover (blue line crosses over the red line).
A STRONG short signal is painted (i.e. red label with S+) when:
- SAR short trigger (red arrow) coincides with an EIT cross-under (blue line crosses under red line).
A STRONG signal will always result in entering (if not in any position) or flipping a long/short position.
-----------------------------------------------------------------------------------------------------------------------------------------------
A signal is decided to be WEAK when not in a long or short position and a SAR trigger appears.
A WEAK long signal is painted (i.e. blue label with L-) when:
- Not in a position (gray bars) and a SAR long trigger (blue arrow) appears but not coinciding with an EIT crossover.
A WEAK short signal is painted (i.e. red label with S-) when:
- Not in a position (gray bars) and a SAR short trigger (red arrow) appears but not coinciding with an EIT cross-under.
A WEAK signal will only result in a long/short position when not in any position.
-----------------------------------------------------------------------------------------------------------------------------------------------
A long/short position is exited on a trend reversal of the EIT.
A short position is exited (i.e. red x-cross) when:
- A crossover of the EIT happens (blue line crosses over the red line).
A long position is exited (i.e. blue x-cross) when:
- A cross-under of the EIT happens (blue line crosses under the red line).
-----------------------------------------------------------------------------------------------------------------------------------------------
Color of the bars are depend on position type:
- Blue = Long position
- Red = Short position
- Gray = No position
-----------------------------------------------------------------------------------------------------------------------------------------------
Enjoy using the script. I hope it is of value to you!
If you have any questions, don't hesitate to contact me.
With kind regards,
Kitsune (L3F03X)
MM-S/R
This indicator shows long term support and resistance levels that combine monthly time frame and selected time frame. For example, If you select 4h time frame, this indicator shows supports and resistances for 4h and also 1 month time frame.
Orange dashed line : Lowest low level for selected time frame in 377 bars.
Orange line : It shows pivot low levels based on price touches for selected time frame.
Maroon line : It shows pivot low levels based on price touches for monthly time frame.
Green line : It shows pivot high levels based on price touches for selected time frame.
Aqua line : It shows pivot high levels based on price touches for monthly time frame.
Green dashed line : Highest high level for selected time frame in 377 bars.
This is just an indicator. You can use it, but it’s at your own risk.
Bu indikatör seçilen zaman dilimi ve 1 aylık periyotlar için uzun dönemli destek ve direnç seviyelerini gösterir. Örneğin, 4 saatlik zaman dilimini seçerseniz, bu indikatör size 4 saatlik zaman dilimi için oluşan destek ve dirençlerin yanı sıra 1 aylık periyotta oluşan destek ve direnç noktalarınıda gösterir.
Turuncu kesikli çizgi : Seçilen zaman dilimine göre 377 barlık en düşük seviyeyi gösterir.
Turuncu çizgi : Seçilen zaman diliminde oluşan pivot düşük noktalarını ve bu noktalara fiyat dokunuşlarını baz alarak çizilir.
Mor çizgi : 1 aylık periyotta oluşan pivot düşük noktalarını ve bu noktalara fiyat dokunuşlarını baz alarak çizilir.
Yeşil çizgi : Seçilen zaman diliminde oluşan pivot yüksek noktalarını ve bu noktalara fiyat dokunuşlarını baz alarak çizilir.
Turkuaz çizgi : 1 aylık periyotta oluşan pivot yüksek noktalarını ve bu noktalara fiyat dokunuşlarını baz alarak çizilir.
Yeşil kesikli çizgi : Seçilen zaman dilimine göre 377 barlık en yüksek seviyeyi gösterir.
Bu sadece bir indikatördür, alım satım tavsiyesi içermez. Kendi riskinizi alarak kullanabilirsiniz. Yatırım tavsiyesi değildir.
Dynamical Support and Resistance [Fournier-Eaton]The Dynamical Support and Resistance Indicator finds support and resistance levels.
The plot is price relative: if the indicator nears one of its supports or resistances then the price is likewise nearing a support.
The levels are dynamical: once a support or resistance is broken, a new calculation is performed.
There are 3 supports and 3 resistances each with a longer time-frame. Breaking through the first shouldn't signal much, breaking through the third is programmed to only happen at a significant number of standard deviations.
Enjoy. Feedback appreciated
Support Resistance - DynamicThis is Dynamic Support / Resistance script.
How it Works?
It finds Pivot Points and creates channels for each Pivot Point. Channel size is calculated by (Highest - Lowest) * %Channel_size in Loopback Period. After creating channels it calculates that how many Pivot Points in the channels. more Pivot Points in channel means stronger Support/Resistance. in the option menu there is S/R Strength, this is the minimum number of Pivot Points that each channel must contain to be S/R. calculation starts from last pivot point and go back for "loopback period" which is 300 by default. so last Pivot Points have more priority. Finally after calculating Support/Resistance it draws lines.
Number of Support/Resistance line is Dynamic and up to 20 lines, that means number of lines changes dynamically. you can see how the script puts Suppport/Resistance lines dynamically by "Replay" button. (if I have time I will try to put a video)
Currently the scripts checks up to 40 pivot points in loopback period. it shows up to 20 S/Rs only for visible area in the chart.
There is option to Show S/R lines as Solid, Dotted or Dashed.
Enjoy!
[fikira] Bollinger Bands + Higher Time FramesHere is my take on BB and MTF, based on the most excellent work of
"PineCoders" (MTF Selection Framework functions)!
The big advantage is that on 1 image you can easily see where
price is compared to 5 or less BB Bands (each of different Time Frames).
This gives a lot of Support and Resistance area's!
Includes:
- 1 Bollinger Bands (can be enabled/disabled - "Bollinger Bands"
- 4 Bollinger Bands (each can be enabled/disabled - "HTF Selection 1-4")
Each BB has its colour (can be changed)
- Labels (Timeframe and price) can be enabled/disabled
- Labels position and size can be changed
...
Liens Support & Resistances + Trend following v2
1. Previous daily Support and resistance levels ( Not showing on chart - Needs to be used on lower tf )
2. Previous Weekly Support and resistance levels
Blue circles = Weekly Support
Yellow circles = Weekly resistance
This setting is currently set to "0 days" so when you open the script it wont show.
On chart previous weekly is set to "10 weeks"
3. Auto Support and resistance levels targeting Highs and lows(wicks).
Auto color change
Support = always green
resistance = always red.
4. Trendfollowing Using the 20 ema
Bars change color when price is over/under ema.
Liens Support and resistance + trend following1. Two different support and resistance levels. One that focuses on price action and one for wicks. (Wicks needs to be turned on)
3. 20 ema trendfollowing. Bars change color. when price is over/under ema.
4. Bar color levels also work with rsi levels. Currently set to 0-100. If you only want bars to change color when the rsi is overbough/oversold. simply just change the levels to 70-30 or whatever you like :)
Support and Resistance lines by PeterOAs all seasoned traders know, there's no better trading tactics than Price Action. Price Action understood not as some fancy candlestick formations, but as horizontal lines called Support and Resistance, generated by the market in the past - where the price reacted and reversed, showing which levels were strongly defended by traders around the world.
Price very often reverses again and again from these lines and once it finally breaks through them, very often returns for a retest before continuing its journey, very juicy for the trader. Support becomes Resistance and Resistance becomes Support - surely you have heard those rules before.
Support and Resistance lines are a map to the market. They are best entry spots out there. You might want to add more tools and techniques to your trading analysis, but truth is, moves will always start on some Support or Resistance line. Very often to the tick. People not seeing these lines trade blindfolded.
Difficulty is when it comes to removing those lines. You cannot hold them forever, as the chart would get completely blurred. So this script not only automaticaly draws lines, but also deletes those which become irrelevant. It also shows lines created by 4 tiers of pivot points, by default: 2 bars, 10 bars, 60 bars and 240 bars. So on one-minute chart it would present even 4h Support and Resistance levels, perfect for finding entries even for scalpers. All configurable.
I mostly trade Forex, but S/R rules are applicable to all markets out there.
This is invite-only script, PM me for access.
Iconik Trading Suite: Auto Support/Resistance - DailyAutogeneration of support and resistance lines. Posts a horizontal line of the open/close for the past 40 daily candles.
DM for a PowerPoint describing this indicator and the rest of Iconik in detail.
Iconik Trading Suite Indicator List:
ITS-OSC: Oscillators (v2)
ITS-PAA: Price Action Alerts (v2)
ITS-ASR: Auto Support/Resistance
-> Daily (v2)
-> 3 Day (v2)
-> Weekly (v2)
ITS-4TFC: 4 Time Frame Confirmation (v1)
ITS-DIV: Divergence Seeker (v1)
[AN] OrderBlocksEases the find of possible support and resistance areas.
The Orderblock finder allows overlaying blocks from another timeframe
Customizable strength of previous move and extended info pane.
DH: Grid Start IndicatorDH: Grid Start Indicator
SAVE TIME & FIND BETTER OPPORTUNITIES
This "Grid Start Indicator" greatly reduces the time you must spend looking at charts, candlesticks and trend lines when seeking that ideal spot to set-up and start your next grid trade. Now, within minutes you can evaluate a grid start signal and determine if the opportunity is right for you or not!
ADJUST SIGNALS TO FIT YOUR STYLE
You can trigger signals off your charts CURRENT time frame or set a LONGER time frame for signals (such as 4 hours, 6 hours, 12 hours or other) . Additionally you can display dual time frames to evaluate, compare and confirm your decisions. If that were not enough, there are extra signals based on candlestick patterns available with a single click... WOW!
OPTION TO SET SIGNALS BASED ON EITHER SHORT OR LONG TERM HULL TREND
(plus option to select type of signal)
HEIKIN-ASHI or TRADITIONAL CANDLES
EVALUATE EVERY SIGNAL
This is not a "SEE THE SIGNAL AND BUY " type indicator, it is a valuable tool (or aid) designed to assist you in conjunction with other indicators, strategy know-how and market knowledge. This indicator signals you to "TAKE NOTE" and "EVALUATE A POTENTIAL PRICE POINT" where a grid might be possible. Remember: not all signals are ideal and each will require a thorough evaluation.
COMBINE WITH OTHER GRID INDICATORS
Please combine the other indicators I've created which may help you refine your grid start parameters and opportunities. This Grid Start Indicator works hand-in-glove with the GRID RANGE FINDER INDICATOR .
OPTIONS and INDICATOR COMBINATIONS:
Join our Crypto Grid Masters Community (Discord) for additional help and ideas with my indicators and your grids!
Automate your Grid Strategy using the Grid Bot here:
cryptogridbot.com
THIS IS A PAID INDICATOR
(currently at 50% off annual subscription)
PURCHASE or SUBSCRIBE HERE:
ez.ht
AFTER YOU'VE PURCHASED - ping me here at Tradingview with receipt number (@ DanHollings ) or my Discord
Any indicator you purchase will be added to the "Invite-Only" section of your indicators area at Tradingview as quickly as I can get to it.
PLEASE HIT THE LIKE BUTTON (and follow me... lots of great stuff in the works!)
As always, I appreciate your support. Please share with others.
ENJOY!
Dan Hollings
Master Crypto Grid Trader
Host of the "High Leverage Lounge"
Please Explore My Other Indicators, Scripts, Grids and Educational Ideas.
@ DanHollings on Tradingview
Crypto Grid Bot
cryptogridbot.com
Crypto Grid Master Discord
cryptogridtrader.com
Support/Resistance Zones x3Support and Resistance Levels + Zones for 3 time frames, based on volume at fractal levels with Zones based on wick size which is a true reflection of a Zone when compared to other S/R Zone scripts which only use a thick line not based on anything.
Original script is thanks to synapticex I have just migrated to version 3, heavily modified it and added Support and Resistance Zones.
[IE] Multiple price indicators + SCALPERDetect divergences in price and RSI + pivot points (with alert option). Credits to @Libertus for this, I only reproduced it and after that he pointed me to his work.
Has ChartVamp and EricChoe MAs with prediction.
Displays Support and Resistance areas
Detects momentum changes.
Custom scalper with alert option.
DYNAMIC SUP/RESDynamic Support / Resistance Indicator.
Dynamic volume based support/resistance levels.
Plots also4 EMA and 2 SMA.
Best used for scalping ranging price but can also help find trade entries for trending market.
White area represents current range. Red lines are Stop Loss levels based on range and Risk to Reward ratio which you can change in settings.
Trade Safe and DYOR!
