Começar

Multitimeframe

Final Scalping Strategy - RELAXED ENTRY, jangan gopoh braderEMA Scalping System (MTF) Guide (1HR direction, 15 min entry) Objective To capture small, consistent profits by entering trades when 15-minute momentum aligns with the 1-hour trend. Trades are executed only during high-liquidity London and New York sessions to increase the probability of execution and success. Strategy Setup Chart Timeframe (Execution): 15-Minute (M15). Trend Filter (HTF): 1-Hour (H1) chart data is used for the long-term EMA. Long-Term Trend Filter: 50-Period EMA (based on H1 data). Short-Term Momentum Signal: 20-Period EMA (based on M15 data). Risk Metric: 14-period ATR for dynamic Stop Loss calculation. ✅ Trading Rules🟢 Long (Buy) Entry Conditions Session: Must be within the London (0800-1700 GMT) or New York (1300-2200 GMT) sessions. HTF Trend: Current price must be above the 1-Hour EMA 50. Momentum Signal: Price crosses above the 15-Minute EMA 20. Confirmation: The bar immediately following the crossover must close above the 15-Minute EMA 20. Ent ry: A market order is executed on the close of the confirmation candle. 🔴 Short (Sell) Entry Conditions Session: Must be within the London (0800-1700 GMT) or New York (1300-2200 GMT) sessions. HTF Trend: Current price must be below the 1-Hour EMA 50. Momentum Signal: Price crosses below the 15-Minute EMA 20. Confirmation: The bar immediately following the crossover must close below the 15-Minute EMA 20. Entry: A market order is executed on the close of the confirmation candle. 🛑 Trade Management & Exits Stop Loss (SL): Placed dynamically at 2.0 times the 14-period ATR distance from the entry candle's low (for Buys) or high (for Sells). Take Profit (TP): Placed dynamically to achieve a 1.5 Risk-Reward Ratio (RR) (TP distance = 1.5 x SL d istance). 📊 On-Chart Visuals Detailed Labels: A box appears on the entry bar showing the action, SL/TP prices, Risk/Reward in Pips, and the exact R:R ratio. Horizontal Lines: Dashed lines display the calculated SL (Red) and TP (Green) levels while the trade is active. Background: The chart background is shaded to highlight the active London and New York tradi ng sessions.
Estratégia Pine Script®
por hushedDiamond97573
Elite PRO V10.0 - Optimised🎯 ELITE PRO V10.0 - COMPLETE USER GUIDE 📋 QUICK START SETUP Step 1: Apply the Indicator Add to your TradingView chart Works on any timeframe (automatically adapts) Recommended: 1-5 minutes for scalping, 15-min for intraday, 1H/4H for swing Step 2: Configure Your Risk pine accountSize = 2000 // Your account balance riskPercent = 1.0 // Risk 1% per trade useFixedRR = true // Use consistent risk-reward fixedRRRatio = 1.5 // Aim for 1:1.5 R:R Step 3: Understand the Info Table The table shows real-time market analysis and signals: 🔍 HOW TO READ THE SIGNALS Signal Types & When to Trade: Signal Type Market Condition Action TREND Strong trending market Trade with trend direction RANGE Sideways market Buy low, sell high EXHAUSTION Trend weakening Prepare for reversal NO SIGNAL Uncertain conditions Wait for better setup Signal Strength Hierarchy: STRONG 🟢 → High probability, trade aggressively MODERATE 🟡 → Good setup, normal position size QUICK 🔵 → Short-term opportunity, smaller size WEAK 🔴 → Avoid or use tiny position size ⚡ TRADING WORKFLOW Step 1: Check Market Context text MARKET CONTEXT: Market Type: TRENDING/RANGING Trend Phase: Bull Strong/Bear Weak/Neutral Exhaustion: None/Bull Exh/Bear Exh Action: TRENDING → Look for trend continuation signals RANGING → Look for range-bound signals EXHAUSTION → Prepare for potential reversal Step 2: Analyze MTF Alignment text MTF Alignment: M5:↑ M15:↓ H1:↓ TF Boost: 15% Action: All arrows same direction → Strong confirmation Mixed alignment → Proceed with caution Opposing alignment → Avoid trading Step 3: Evaluate Confidence text Confidence: 78% | Threshold: 65% Confidence Breakdown: W:0.8 T:0.7 P:0.3 TF:0.15 Action: Above 70% → High conviction trade 65-70% → Moderate conviction Below 65% → Wait for better setup Step 4: Execute Trade When ALL conditions align: ✅ Clear SIGNAL (BUY/SELL) ✅ Strong/Moderate signal strength ✅ Confidence > threshold (65%+) ✅ Good MTF alignment ✅ Favorable market context 🎯 ENTRY & EXIT STRATEGY Entry: Enter at current price when signal generates Use market orders for quick execution Don't chase - wait for proper setup Stop Loss: Automatically calculated based on: ATR volatility Market structure (swing highs/lows) Timeframe-appropriate distance Take Profit: Scalping: 1.2-1.8x risk Intraday: 1.5-2.2x risk Swing: 2.0-2.5x risk Adjust based on signal strength ⚠️ RISK MANAGEMENT RULES Position Sizing: 1% risk per trade (standard) 0.5% risk for weak signals 1.5% risk for strong signals with perfect alignment Daily Limits: Max 3 trades per day Max 3% total daily risk Stop trading after 2 consecutive losses Market Condition Filters: Avoid trading during major news events Reduce size during high volatility (TF Boost shows volatility) Skip signals when MTF alignment is poor 🔧 OPTIMIZATION TIPS For Scalpers (1-5 min): Focus on QUICK SCALP and STRONG SCALP signals Use tighter stops (system auto-adjusts) Trade only with full MTF alignment For Intraday (15 min - 1H): Perfect balance of signal quality and frequency All signal types valid Best for most traders For Swing Traders (4H - 1D): Fewer but higher quality signals Larger position sizes acceptable Focus on STRONG SWING signals 🚨 COMMON MISTAKES TO AVOID ❌ Trading "NO SIGNAL" periods - Patience is key ❌ Overriding the confidence threshold - Trust the system ❌ Ignoring MTF alignment - This is your edge ❌ Changing position sizes arbitrarily - Stick to the plan ❌ Chasing losing streaks - Take breaks after losses 📊 PERFORMANCE MONITORING Track These Metrics: Win rate by signal type (TREND vs RANGE vs EXHAUSTION) Performance by signal strength MTF alignment impact on success rate Timeframe-specific performance Continuous Improvement: Review Confidence Breakdown for failed trades Adjust weights if certain components consistently underperform Monitor which MTF combinations work best 🎪 PSYCHOLOGY & MINDSET Success Mindset: Quality over quantity - Fewer high-probability trades Process over outcome - Focus on following the system Patience - "NO SIGNAL" is a valid outcome Consistency - Don't cherry-pick signals When in Doubt: "If the confidence is below 70% and MTF alignment isn't perfect, it's probably not worth taking the trade." 🚀 FINAL CHECKLIST BEFORE TRADING ✅ Signal: BUY/SELL (not "NO SIGNAL") ✅ Strength: STRONG or MODERATE ✅ Confidence: >65% (preferably >70%) ✅ MTF Alignment: At least partial alignment ✅ Market Context: Matches signal type ✅ Risk Management: Position size calculated ✅ Psychology: Calm, patient, disciplined Remember: This system is designed to keep you out of bad trades. "NO SIGNAL" is a feature, not a bug. The best traders are often the most patient ones. Happy Trading! 🎯
Indicador Pine Script®
por trader1292
RSI + MACD Multi-Timeframe StrategyThis strategy combines the Relative Strength Index (RSI) from the daily timeframe with the Moving Average Convergence Divergence (MACD) from the 4-hour timeframe to generate precise long entry and exit signals. The system uses a multi-timeframe approach to align longer-term trend conditions with shorter-term momentum shifts — allowing traders to catch dips with confirmation and exit before reversals. 🧠 Strategy Logic ✅ Long Entry Condition: - RSI on the daily (1D) timeframe is oversold (below your defined threshold) - MACD on the 4H timeframe crosses above the signal line → A long trade is opened when these two align ✅ Long Exit Condition: - RSI on the daily timeframe is overbought - MACD on the 4H timeframe crosses below the signal line → The long trade is closed when these two conditions are met 💡 This strategy currently supports long entries only. Short logic can be added if needed. 📊 Indicator Components 🔹 RSI (Relative Strength Index): - A momentum oscillator that measures the speed and magnitude of price changes. - Helps identify overbought (potential sell) and oversold (potential buy) conditions. - Applied on the 1D timeframe (by default) to reflect broader market trend or exhaustion levels. 🔹 MACD (Moving Average Convergence Divergence): - A trend-following momentum indicator based on moving averages. - The MACD Line (fast EMA - slow EMA) crossing above the Signal Line indicates bullish momentum. - Used here on the 4-hour timeframe (by default) for shorter-term momentum confirmation. 🔹 Multi-Timeframe (MTF) Logic: - Uses request.security() to pull higher timeframe data (1D for RSI, 4H for MACD). - Ensures no repainting, as it only uses closed candles from the higher timeframe. - Aligns longer-term signals with shorter-term entries, reducing false signals. 📈 Plotting Options The script includes a plot selector input allowing you to toggle between: - RSI Plot (with overbought/oversold lines) - MACD Plot (MACD line and signal line) - This helps visualize signal conditions clearly on your chart. 🛠 Customization - RSI & MACD settings are fully configurable - RSI and MACD timeframes can be adjusted independently ⚠️ Disclaimer This strategy is provided for educational and informational purposes only. It is not financial advice or a recommendation to buy or sell any asset. Past performance does not guarantee future results. Always test strategies in a simulated environment before live use, and consult with a licensed financial advisor for investment decisions.
Estratégia Pine Script®
por RWCS_LTD
2
SR-ZnV2There are many support and resistance scripts out there. I was unable to find one that met all of my needs so I have expanded on the closest ones that I was able to discover. The ability to show persistent S/R levels by volume at various time frames automates much of the process for the user with unique and customizable features, the lastest dated of which are displayed by its time frame support/resistance strength and extend toward the right of the screen where they can be seen more clearly by price . // Original script is thanks to tommyf1001, synapticex and additional modifications is thanks to Lij_MC. Credit to both of them for most of the logic behind this script. Since then I have made many changes to this script as noted below. // Changed default S/R lines from plots to lines, and gave option to user to change between solid line, dashed line, or dotted line for both S/R lines. // Added additional time frame and gave more TF options for TF1 other than current TF. Now you will have 4 time frames to plot S/R zones from. // Gave user option to easily change line thickness for all S/R lines. // Made it easier to change colors of S/R lines and zones by consolidating the options under settings (rather than under style). // Added extensions to active SR Zones to extend all the way right. // Added option to extend or not extend the previous S/R zones up to next S/R zone. // Added optional time frame labels to active S/R zones, with left and right options as well as option to adjust how far to the right label is set. // Fixed issue where the higher time frame S/R zone was not properly starting from the high/low of fractal. Now any higher time frame S/R will begin exactly at the High/Low points. // Added to script a function that will prevent S/R zones from lower time frames displaying while on a higher time frame. This helps clean up the chart quite a bit. // Created arrays for each time frame's lines and labels so that the number of S/R zones can be controlled for each time frame and limit memory consumption. // New alert options added and customized alert messages.
Indicador Pine Script®
por cjohnsonfl5
Session SFPThis script is a powerful, multi-timeframe tool designed to identify high-probability Swing Failure Patterns (SFPs) at key historical levels. Instead of looking for traditional "pivots" (like a 3-bar swing), this indicator finds the actual high and low of a previous higher-timeframe (HTF) bar (e.g., the previous weekly high/low) and waits for a lower-timeframe (LTF) candle to sweep that level and fail. This allows you to spot liquidity sweeps and potential reversals at significant, structural price points. How It Works The indicator's logic is based on a simple, two-timeframe process: Level Detection: First, it finds the high and low of the previous bar on your chosen "Level Timeframe" (e.g., W for Weekly, D for Daily). It plots these as small 'x' markers on your chart. SFP Identification: Second, it watches price action on a lower "SFP Timeframe" (e.g., 240 for 4H). A potential SFP is identified when a candle's wick sweeps above a key high or below a key low. Confirmation: The SFP is only confirmed after the SFP candle closes back below the high (for a bearish SFP) or above the low (for a bullish SFP). It then waits for a set number of "Confirmation Bars" to pass. If price does not close back over the level during this window, the signal is locked in, and a label is printed. How to Use (Key Settings) Level Timeframe (Most Important): This is the timeframe for the levels you want to trade. Set this to W to find SFPs of the previous weekly high/low. Set it to D to find SFPs of the previous daily high/low. SFP Timeframe: This is the timeframe you want to use to find the SFP candle itself. This should be lower than your Level Timeframe (e.g., 240 or 60). Level Lookback: This controls how many old levels the script will track. A value of 10 on a W Level Timeframe will track the highs and lows of the last 10 weeks. Confirmation Bars: This is your "patience" filter. It's the number of SFP Timeframe bars that must close without reclaiming the level after the SFP. A value of 0 will confirm the SFP immediately on the candle's close. Enable Wick % Filter: A quality filter. If checked, this ensures the SFP candle's rejection wick is a significant percentage of the candle's total range. Chart Visuals 'x' Markers: These are the historical highs and lows from your "Level Timeframe". You can turn these on or off in the settings. SFP Label: When an SFP is fully confirmed, a label (Bearish SFP or Bullish SFP) will appear, detailing the level that was swept and the timeframes used. SFP Line: A solid horizontal line is drawn from the 'x' marker to the SFP candle to highlight the sweep. Colored Boxes (Optional): If you are viewing a chart timeframe lower than your "SFP Timeframe", you can enable background boxes to highlight the exact SFP candle and its confirmation bars.
Indicador Pine Script®
por nickbonenkamp
Elite PRO V10.0Add to Chart Click "Add to Chart" in TradingView Search for "Elite PRO V10.0 - Timeframe Aware" Apply to your preferred trading pair Basic Configuration Start with default settings Adjust account size according to your capital Set risk percentage (1-2% recommended) Customization Modify confidence weights based on your strategy Enable/disable signal types as needed Adjust TP/SL settings according to your risk tolerance 📊 Understanding the Table Signal Section SIGNAL: Current trade direction (BUY/SELL/NO SIGNAL) Type: Signal category (TREND/RANGE/EXHAUSTION) Strength: Signal strength based on MTF alignment Confidence: Overall system confidence percentage Threshold: Dynamic confidence threshold MTF Alignment Shows alignment status of relevant timeframes Color-coded: Green=Full, Orange=Partial, Lime=Quick, Gray=No alignment Scalping: M1, M5, M15 timeframes Intraday: M5, M15, H1 timeframes Risk Management Entry Price: Suggested entry level Stop Loss: Calculated stop loss with structure consideration Take Profit: Dynamic TP based on R:R ratio R:R Ratio: Risk to reward ratio Position Size: Shares/units based on account risk Market Context Market Type: Ranging or Trending market Trend Phase: Bull/Bear with strength indication Exhaustion: Early warning for potential reversals TF Boost: Confidence boost from timeframe alignment 🎯 Trading Strategy For Scalpers (1min-5min): Focus on QUICK SCALP and MODERATE SCALP signals Use tighter stops (0.8-1.0x ATR) Target 1.2-1.8 R:R ratios Quick entries and exits For Intraday Traders (15min-1hr): Wait for MODERATE INTRADAY or STRONG INTRADAY signals Use standard stops (1.2-1.5x ATR) Target 1.8-2.2 R:R ratios Hold positions for multiple bars For Swing Traders (4hr-Daily): Only take STRONG SWING signals Use wider stops (2.0-2.5x ATR) Target 2.0-2.5+ R:R ratios Patient position management ⚡ Signal Types Explained TREND Signals Best for: Strong trending markets Characteristics: MTF alignment, strong confidence Action: Enter in direction of dominant trend RANGE Signals Best for: Sideways/consolidation markets Characteristics: Range boundary touches, rejection patterns Action: Fade range extremes EXHAUSTION Signals Best for: Trend reversal opportunities Characteristics: Trend exhaustion, divergence patterns Action: Counter-trend with caution 🔔 Alert Setup Recommended Alert Configuration: Trend Alerts - Primary trading signals Range Alerts - For ranging market conditions Exhaustion Alerts - Early reversal warnings Alert Message Format: text TREND BUY | SYMBOL | TIMEFRAME | PRICE 🎨 Customization Options Confidence Weights: Adjust weights based on your preferred analysis methods Higher wick weight = more emphasis on price rejection Higher trend weight = more emphasis on trend strength Risk Management: Account Size: Set your trading capital Risk %: Risk per trade (0.5-2.0% recommended) Fixed R:R: Use consistent risk:reward or dynamic Signal Filters: Early Entries: Enable for earlier but less confirmed signals Full Confirmation: Wait for full MTF alignment Signal Cooldown: Prevent signal spamming ⚠️ Risk Disclaimer IMPORTANT: This is a trading tool, not financial advice. Always: Test strategies in demo accounts first Use proper risk management Understand that past performance ≠ future results Trade only with risk capital you can afford to lose Consider multiple confirmation sources before trading 🆘 Troubleshooting Common Issues: No signals: Check if confidence threshold is too high Too many signals: Increase signal cooldown or threshold MTF not loading: Ensure you have TradingView premium for multiple timeframe data Performance Tips: Use on lower timeframes for faster calculation Disable unnecessary features if experiencing lag Clear cache if indicator becomes unresponsive 🚀 Getting Started Start Simple: Use default settings initially Paper Trade: Test for 2-4 weeks before live trading Gradual Customization: Adjust one setting at a time Keep Journal: Track performance and refine approach Risk First: Always prioritize capital preservation Support & Updates For the latest updates and user community, visit the indicator page on TradingView. Regular updates include: Performance optimizations New feature additions Bug fixes and improvements Happy Trading! 🎯 *Elite PRO V10.0 - Your Smart Trading Companion*
Indicador Pine Script®
por trader1292
True Opens & Key Levels# True Opens & Key Levels - Standalone Indicator Guide ## Overview This is a clean, focused indicator that displays only key level rays and true open levels. All impulsive series detection, FVG detection, and Fibonacci projections have been removed for a minimal, uncluttered chart experience. --- ## Features Included ### 📊 Previous Period Levels - **Previous Day High/Low** - Daily reference points - **Previous Week High/Low** - Weekly reference points - **Previous Month High/Low** - Monthly reference points ### 🕐 Session High/Low Levels - **NY AM Session** (9:30-12:00 ET) - Morning session range - **NY Lunch Session** (12:00-13:30 ET) - Lunch hour range - **NY PM Session** (13:30-16:00 ET) - Afternoon session range - **London Session** (2:00-5:00 ET) - London trading hours - **Asia Session** (20:00-00:00 ET) - Asian market hours ### 🎯 True Open Levels (NEW) - **True Day Open** - Updates daily at 00:00 ET - **True Session Open** - Updates every 6 hours (1:30, 7:30, 13:30, 19:30 ET) - **True Week Open** - Updates every Monday at 18:00 ET --- ## Settings ### Key Level Rays Group **Master Toggle:** - Enable Key Level Rays (master on/off switch) **Previous Period Levels:** - Show Previous Day H/L - Show Previous Week H/L - Show Previous Month H/L **Session Levels:** - Show NY AM H/L (9:30-12:00 ET) - Show NY Lunch H/L (12:00-13:30 ET) - Show NY PM H/L (13:30-16:00 ET) - Show London H/L (2:00-5:00 ET) - Show Asia H/L (20:00-00:00 ET) **True Open Levels:** - Show True Day Open (00:00) - Show True Session Open (6h intervals) - Show True Week Open (Mon 18:00) **Visual Settings:** - High Level Color (default: red with 50% transparency) - Low Level Color (default: green with 50% transparency) - Open Level Color (default: blue with 50% transparency) - Ray Line Width (1-5 pixels) - Ray Label Size (tiny/small/normal/large) --- ## How It Works ### Level Behavior **Session High/Low Levels:** 1. During session: Tracks the highest high and lowest low 2. After session ends: Draws horizontal rays extending right 3. When price hits level: Ray stops extending (hit marker) 4. Label updates position to stay at chart's right edge **Previous Period Levels:** 1. At period change: Draws rays from previous period's H/L 2. Extends right until price hits the level 3. When hit: Ray stops extending 4. Label positions at midpoint of ray **True Open Levels:** 1. At trigger time: Draws ray from opening price 2. Extends right until next trigger 3. Previous level is deleted when new one appears 4. Label stays at right edge of chart --- ## Color Scheme ### Three Color Categories: 1. **Red** - All HIGH levels (session highs, previous highs) 2. **Green** - All LOW levels (session lows, previous lows) 3. **Blue** - All OPEN levels (True Day/Session/Week Opens) This makes it instantly clear what type of level you're looking at. --- ## Best Practices ### For Intraday Trading (1m-1H): ``` Enable: ✓ True Day Open ✓ True Session Open ✓ NY AM/PM H/L ✓ Previous Day H/L Disable: ✗ Previous Week/Month H/L ✗ London/Asia sessions (unless trading them) ✗ True Week Open ``` ### For Swing Trading (1H-4H): ``` Enable: ✓ True Week Open ✓ True Day Open ✓ Previous Week H/L ✓ Previous Day H/L Disable: ✗ All session H/L ✗ True Session Open ✗ Previous Month H/L ``` ### For Clean Charts: ``` Enable: ✓ True Day Open ✓ True Week Open ✓ Previous Day H/L only Disable: ✗ Everything else Result: Just 4 levels on chart - super clean! ``` --- ## Level Update Schedule | Level | Update Frequency | Time(s) | |---------------------|------------------|-----------------------------| | True Day Open | Daily | 00:00 ET | | True Session Open | Every 6 hours | 1:30, 7:30, 13:30, 19:30 ET | | True Week Open | Weekly | Monday 18:00 ET | | Previous Day H/L | Daily | At day change | | Previous Week H/L | Weekly | At week change | | Previous Month H/L | Monthly | At month change | | NY AM H/L | Daily | After 12:00 ET | | NY Lunch H/L | Daily | After 13:30 ET | | NY PM H/L | Daily | After 16:00 ET | | London H/L | Daily | After 5:00 ET | | Asia H/L | Daily | After 00:00 ET | --- ## File Size & Performance - **File Size:** ~22 KB (less than half the size of full indicator) - **Total Lines:** ~700 lines - **Max Lines/Labels:** 500 (configurable in declaration) - **Performance:** Lightweight, minimal CPU usage - **Memory:** Efficient variable management --- ## Installation 1. Open TradingView 2. Open Pine Editor (Alt+E or bottom toolbar) 3. Click "Create new indicator" 4. Delete default code 5. Copy and paste contents of `TRUE_OPENS_KEY_LEVELS.pine` 6. Click "Save" and name it "True Opens & Key Levels" 7. Click "Add to Chart" --- ## Usage Tips ### 1. Start Minimal Begin with just 2-3 levels enabled: - True Day Open - Previous Day High - Previous Day Low Add more as needed. ### 2. Color Customization Adjust transparency for cleaner look: - High Level: Red 60-70% transparency - Low Level: Green 60-70% transparency - Open Level: Blue 60-70% transparency ### 3. Multi-Timeframe Approach Lower timeframes (1m-15m): Use True Session Open + NY session H/L Mid timeframes (15m-1H): Use True Day Open + Previous Day H/L Higher timeframes (1H-4H): Use True Week Open + Previous Week H/L ### 4. Line Width For cleaner charts, use Line Width = 1 For emphasis, use Line Width = 2-3 ### 5. Label Size Smaller screens: Use "small" or "tiny" Larger screens: Use "normal" Presentations: Use "large" --- ## Advantages of Standalone Version ✅ **Cleaner Charts** - No detection lines or arrows ✅ **Faster Loading** - Less code to process ✅ **Easier Setup** - Fewer settings to configure ✅ **Pure Levels** - Focus only on key price levels ✅ **Less Distraction** - No moving parts during trading ✅ **Perfect for Combining** - Use with other indicators without clutter --- ## Combining with Other Indicators This lightweight indicator works great alongside: - RSI / Stochastic (oscillators) - Moving Averages (trend) - Volume Profile (structure) - VWAP (intraday reference) - Your own custom indicators The minimal chart footprint leaves room for additional tools. --- ## Time Zones All times are in **Eastern Time (ET)**. TradingView automatically converts to your local timezone, so you don't need to manually adjust anything. **Example Conversions:** - 00:00 ET = 05:00 UTC - 18:00 ET = 23:00 UTC - 13:30 ET = 18:30 UTC --- ## Support & Updates This is a standalone version of the True Opens & Key Levels from the full GOTE Indicator. It contains only the level detection code with all series detection removed. **Version:** 1.0 **Pine Script Version:** 6 **Last Updated:** November 8, 2025 --- ## Quick Reference Card ``` ╔══════════════════════════════════════════════════════════╗ ║ TRUE OPENS & KEY LEVELS - QUICK REFERENCE ║ ╠══════════════════════════════════════════════════════════╣ ║ ║ ║ 📊 PREVIOUS PERIODS ║ ║ • Previous Day/Week/Month High/Low ║ ║ • Updates at period change ║ ║ ║ ║ 🕐 SESSION LEVELS ║ ║ • NY AM/Lunch/PM, London, Asia H/L ║ ║ • Updates after each session ║ ║ ║ ║ 🎯 TRUE OPENS ║ ║ • True Day: Daily 00:00 ET ║ ║ • True Session: 1:30/7:30/13:30/19:30 ET ║ ║ • True Week: Monday 18:00 ET ║ ║ ║ ║ 🎨 COLORS ║ ║ • Red = Highs • Green = Lows • Blue = Opens ║ ║ ║ ╚══════════════════════════════════════════════════════════╝ ``` --- **Ready to trade with clean, focused key levels!** 🎯
Indicador Pine Script®
por grayp352
ORB Breakout Strategy w/ Filters - Dynamic Sizing - MTFHere is a comprehensive description of the strategy, written in a clear and structured format. You can use this for your script's "how-to-use" guide or documentation. --- ## 📈 Opening Range Breakout (ORB) Strategy This is a comprehensive, multi-timeframe strategy built for trading opening range breakouts. It is designed with a "filters-first" approach, allowing you to validate a breakout with trend, volume, and volatility. The strategy's core power comes from its flexibility. You can trade on a low timeframe (like a 1-minute chart) while basing your breakout levels on a higher timeframe's opening bar (e.g., the first 15-minute bar). It includes dynamic position sizing based on risk and a wide array of advanced exit management options. ### Key Features * **Multi-Timeframe Opening Range:** The core of the strategy. You can define the "Opening Range" timeframe (5, 10, 15, 30, or 60 min) *independently* of your chart timeframe. * **Custom Trading Session:** Define the exact session (e.g., "0930-1600" in "America/New_York") you want to trade. * **One Trade Per Session:** The strategy will only take the *first valid breakout* signal per day to avoid over-trading. --- ### 🚦 Entry Signals & Filters A trade is only initiated when the price closes above the Session High or below the Session Low **AND** all active filters are passed. * **Trend Filter:** (Optional) Requires price to be above a long-term MA (e.g., 100 EMA) for long trades and below it for short trades. * **Volume Filter:** (Optional) Requires the breakout bar's volume to be a specified multiplier (e.g., 1.5x) of the recent average volume. * **Volatility Filter:** (Optional) Requires the current ATR to be higher than its long-term average, ensuring you only trade during periods of expanding volatility. * **Direction Filter:** Allows you to isolate the strategy to **Long Only**, **Short Only**, or **Both**. --- ### 💰 Dynamic Position Sizing The strategy includes a robust "Risk %" sizing model. * **Risk-Based Sizing:** Instead of fixed contracts, it calculates the position size based on your **Account Size**, **Risk % per Trade**, and the **Stop Loss distance**. * **Auto-Detect Point Value:** It automatically detects the correct point value for popular futures contracts (ES, NQ, MES, MNQ) and provides a manual override for other assets. --- ### 📤 Exit & Risk Management This strategy features a multi-layered exit system, giving you complete control over how trades are managed. #### 1. Stop Loss (SL) Your initial stop loss can be calculated using a fixed **Tick** offset or an **ATR** multiplier. It can be anchored from two different points: * **Breakout Level:** The stop is placed relative to the `sessionHigh` or `sessionLow` level. * **Entry Bar:** The stop is placed relative to the high/low of the bar that *triggered* the entry. #### 2. Take Profit (TP) A standard Take Profit can be set using a fixed **Tick** offset or an **ATR** multiplier. #### 3. Advanced Exit Logic These options override the standard Take Profit to allow for more dynamic trade management: * **Trailing Take Profit (TTP):** * **Fixed/ATR Trail:** A standard trailing stop that activates after price moves a certain amount in your favor. * **MA Price Cross:** Exits the trade as soon as the price closes across a fast-moving average (e.g., 9-EMA). * **MA Crossover:** Exits the trade as soon as a fast MA crosses below a slow MA (for longs) or above (for shorts). * **Close on Reversal:** (Optional) Exits immediately if the **very next bar** after entry closes back *inside* the opening range (a "failed breakout" signal). * **Close on Opposite Range Cross:** (Optional) Exits a long trade if the price ever closes below the `sessionLow` (and vice-versa for shorts). * **End of Session Exit:** All open positions are automatically closed at the end of the defined trading session.
Estratégia Pine Script®
por BruceAaLee
3
ROC & Momentum FusionROC & Momentum Fusion (by HabibiTrades ©) Purpose: “ROC & Momentum Fusion” combines the Rate of Change (ROC) with a MACD-style signal engine to identify early momentum reversals, confirmed trend shifts, and low-volatility choppy zones. It’s built for traders who want early momentum detection with the clarity of trend persistence — adaptable to any instrument and timeframe. ⚙️ How It Works Rate of Change (ROC): Measures the percentage speed of price change over time, showing the raw momentum strength. Signal Line (EMA): A short EMA of the ROC — responds faster to new directional shifts, similar to a MACD signal line. Histogram: Displays acceleration and deceleration between the ROC and its signal line. Persistent Trend States: When the ROC crosses the signal line or zero, the indicator enters a new momentum regime (bullish or bearish) and stays in that color until another flip occurs. Dynamic Choppy Zone: When ROC momentum fades within the zero buffer zone, the indicator turns orange, signaling a sideways or indecisive market. 🟢 Visual Regimes Regime Description Color Bullish Momentum ROC above zero or signal line 🟢 Neon Green Bearish Momentum ROC below zero or signal line 🔴 Neon Red Choppy / Neutral ROC hovering within ±threshold range 🟠 Neon Orange This color system makes it visually effortless to see whether the market is trending, reversing, or consolidating. 🧭 Adaptive Intelligence The script automatically adjusts to market type and session for consistent accuracy: Session Adaptive: Adjusts smoothing based on global sessions (Asian, London, New York, Sydney). Instrument Adaptive: Fine-tunes sensitivity automatically for major assets — NASDAQ (NQ), S&P 500 (ES), Gold (GC), Oil (CL), Bitcoin (BTC). Volatility Normalization: Optionally divides ROC by its own standard deviation to stabilize noisy assets and maintain consistent scaling. 🔔 Signals & Alerts Bullish Reversal: ROC crosses above its signal or zero line — early momentum flip. Bearish Reversal: ROC crosses below its signal or zero line — downward momentum flip. Alerts: Both reversal conditions include built-in alert triggers for automation and notifications. 🎨 Visual Features Main ROC Line: Adaptive EMA of ROC, color-coded by trend regime. Signal Line: Optional white EMA overlay for MACD-style crossovers. Histogram: Visual burst display of acceleration (green/red). Reversal Markers: Optional triangles marking exact crossover points. Threshold Lines: Highlight the zero and buffer zones for visual clarity. 🧩 Best Use Cases Identify early momentum shifts before price confirms them. Confirm trend continuation or exhaustion with color persistence. Detect choppy / low-volatility periods instantly. Works across all timeframes — from 1-minute scalping to weekly swings. Combine with structure, EMAs, or volume for confirmation. ⚙️ Recommended Settings Setting Default Description ROC Period 6 Core momentum length (lower = faster response). Signal EMA Length 3 MACD-style responsiveness (lower = more reactive). Zero Buffer Threshold 0.15 Defines the width of the neutral zone around zero. Choppy Zone Multiplier 1.0 Expands or tightens the orange zone sensitivity. These defaults have been optimized through real-market testing to balance responsiveness and smoothness across different asset classes. ⚠️ Notes The color regime is persistent, meaning once the line turns bullish or bearish, it remains in that state until momentum structurally flips. The orange zone represents momentum uncertainty and helps avoid false entries in range-bound markets. Works seamlessly on any timeframe and with any asset.
Indicador Pine Script®
por Habibitrades_
Atif's Liquidity Toolkit💎 GENERAL OVERVIEW: Atif’s Liquidity Toolkit is a price-action-based indicator used to identify Buyside & Sellside Liquidity Levels, Liquidity Sweeps, FVG Sweeps, and Buy/Sell signals, following specific rules from Atif Hussain. This indicator was developed by Flux Charts in collaboration with Atif Hussain. 🔹Purpose of this indicator: The purpose of Atif’s Liquidity Toolkit is to help traders understand where liquidity is forming, when it’s being taken, and how momentum shifts immediately afterward. It automates the entire process of identifying buyside & sellside liquidity, detecting liquidity sweeps, and confirming whether displacement followed through a Fair Value Gap. The goal is to give traders a consistent, rule-based framework to interpret market structure. 🎯ATIF’S LIQUIDITY TOOLKIT FEATURES: Atif’s Liquidity Toolkit indicator includes 6 main features: Fair Value Gaps Multi-Timeframe Liquidity Levels Liquidity Sweeps Fair Value Gap Sweeps Buy & Sell Signals with Take-Profit & Stop-Loss Levels Alerts 1️⃣Fair Value Gaps 🔹What is a Fair Value Gap?: A Fair Value Gap (FVG) is an area where the market’s perception of fair value suddenly changes. On your chart, it appears as a three-candle pattern: a large candle in the middle, with smaller candles on each side that don’t fully overlap it. A bullish FVG forms when a bullish candle is between two smaller bullish/bearish candles, where the first and third candles’ wicks don’t overlap each other at all. A bearish FVG forms when a bearish candle is between two smaller bullish/bearish candles, where the first and third candles’ wicks don’t overlap each other at all. Bullish & Bearish FVGs: In the settings, you can toggle on/off FVGs, choose the invalidation method, adjust the sensitivity, and toggle on FVG Midline & Labels. 🔹Invalidation Method: The Invalidation Method setting allows traders to choose how an FVG is invalidated. You can choose between Close and Wick. Close: A candle must close below a bullish FVG or above a bearish FVG to invalidate it. Wick: A candle’s wick must go below a bullish FVG or above a bearish FVG to invalidate it. 🔹Sensitivity: The sensitivity setting determines the minimum gap size required for an FVG detection. A higher sensitivity will filter out smaller gaps, while a lower sensitivity will detect more frequent, smaller gaps. Setting the sensitivity to 0 will display all gaps, regardless of their size. On the left, the sensitivity is 5. On the right, the sensitivity is 0. 🔹Midline: When enabled, a dashed line is drawn at the center of the FVG. 🔹Labels: When enabled, a text label will be plotted with the gap, clearly identifying the zone as a FVG. 2️⃣ Multi-Timeframe Liquidity Levels The indicator automatically detects and plots Buyside Liquidity (BSL) & Sellside Liquidity (SSL) Levels across up to three timeframes simultaneously. 🔹What is Buyside Liquidity? Buyside Liquidity (BSL) represents price levels where many buy stop orders are sitting, usually from traders holding short positions. When price moves into these areas, those stop-loss orders get triggered and short sellers are forced to buy back their positions. These zones often form above key highs such as the previous day, week, or month. Understanding BSL is important because when price reaches these levels, the sudden wave of buy orders can create sharp reactions or reversals as liquidity is taken from the market. 🔹What is Sellside Liquidity? Sellside Liquidity (SSL) represents price levels where many sell stop orders are waiting, usually from traders holding long positions. When price drops into these areas, those stop-loss orders are triggered and long traders are forced to sell their positions. These zones often form below key lows such as the previous day, week, or month. Understanding SSL is important because when price reaches these levels, the surge of sell orders can cause sharp reactions or reversals as liquidity is taken from the market. Atif’s Liquidity Toolkit indicator automatically plots Buyside & Sellside Liquidity levels using the following levels: Previous Day High (PDH) & Previous Day Low (PDL) Previous Week High (PWH) & Previous Week Low (PWL) Previous Month High (PMH) & Previous Month Low (PML) Asia Session Highs/Lows London Session Highs/Lows New York Session Highs/Lows The session start and end times are not customizable. The following times in EST are used for each session: Asia Session: 20:00-00:00 London Session: 02:00-05:00 New York Sessions: NY AM: 09:30-11:00 NY Lunch: 12:00-13:00 NY PM: 14:00-16:00 Users can also plot swing highs/lows using a lookback period and choosing the higher timeframe. Users can choose two custom higher timeframes and also enable swing highs/lows from the current chart’s timeframe. There are three settings to customize for the current chart’s timeframe and higher timeframes: Current TF - when toggled on, swing highs/lows will be plotted from the chart’s timeframe using the pivot length input HTF 1 - when toggled on, swing highs/lows will be plotted from the user-inputted timeframe using the pivot length input HTF 2 - when toggled on, swing highs/lows will be plotted from the user-inputted timeframe using the pivot length input The Pivot Length controls how far back the indicator checks to confirm whether a candle’s high or low is a true swing point (also called a “pivot”). When detecting a swing high, the indicator checks if that candle’s high is higher than the highs of the previous X candles and the next X candles. For a swing low, it checks if the candle’s low is lower than the lows of the previous X candles and the next X candles. The number X comes from your Pivot Length setting. A lower Pivot Length input (for example, 3 or 4) means the indicator only looks at a few candles on each side, so it will detect more swing points, including smaller, less significant ones. A higher Pivot Length input (for example, 20 or 25) makes the indicator look at more candles on each side, so it only marks major turning points that stand out clearly on the chart. In short: Low Pivot Length = more frequent, smaller levels (short-term focus) High Pivot Length = fewer, stronger levels (major swing focus) The Pivot Length input for each setting (Current TF, HTF 1, and HTF 2) are displayed below in the red boxes: Each liquidity level is plotted with a text label, making it easy to identify where a level came from. You can turn off the ‘Show Levels’ setting if you don’t want to see the levels on your chart. Please note: Liquidity Levels play a key role in finding liquidity sweeps, FVG Sweeps, and Buy/Sell signals. Keeping the levels turned off will not stop the indicator from using the levels that are enabled from being used for the other features mentioned. 3️⃣Liquidity Sweeps: The indicator automatically detects bullish and bearish liquidity sweeps using the liquidity levels you have enabled. 🔹What is a Liquidity Sweep? A liquidity sweep is a market phenomenon where significant players, such as institutional traders, deliberately drive prices through key levels to trigger clusters of pending buy or sell orders. It’s how the market gathers the liquidity needed for larger participants to enter positions. Traders often place stop-loss orders around obvious highs and lows, such as the previous day’s, week’s, or month’s levels. When price pushes through one of these areas, it triggers the stops placed there and generates a burst of volume. This often creates a short-term fake-out before the market reverses in the opposite direction. By detecting these sweeps in real time, traders can identify potential reversal areas or “trap” areas where liquidity has been taken. 🔹Bullish Liquidity Sweep These occur when price dips below a Sellside Liquidity (SSL) level, taking out the stop-loss orders placed by long traders below that low. The indicator marks a zone around the candle that swept the SSL to highlight where liquidity was removed from the market. When this happens, it shows that the market just cleared out sell-side liquidity, meaning traders who were long had their stops hit. This is often followed by a reversal or strong reaction upward, because the market no longer has pending liquidity to fill below that level. 🔹Bearish Liquidity Sweep These occur when price dips above a Buyside Liquidity (BSL) level, taking out the stop-loss orders placed by short seller traders above that high. The indicator marks a zone around the candle that swept the BSL to highlight where liquidity was removed from the market. When this happens, it shows that the market just cleared out buyside liquidity, meaning short traders had their stops hit. This is often followed by a reversal or strong reaction downward, because the market no longer has pending liquidity to fill above that level. Under the ‘Liquidity Sweeps’ section in the settings, you can toggle on/off Bullish Regular Sweeps and Bearish Regular Sweeps. You can also customize the line style and color of liquidity levels that have been swept. 🔹How to Use Liquidity Sweeps Liquidity sweeps are not direct trade signals. They are best used as context when forming a directional bias. A sweep shows that the market has removed liquidity from one side, which can hint at where the next move may develop. For example: When Buyside Liquidity (BSL) is swept, it often signals that buy stops have been triggered and the market may be preparing to move lower. Traders may then begin looking for short opportunities. When Sellside Liquidity (SSL) is swept, it often signals that sell stops have been triggered and the market may be preparing to move higher. Traders may then begin looking for long opportunities. It’s common practice to use liquidity sweeps as the first step in building a trade idea. Many traders will wait for additional confirmation, such as a fair value gap forming after the sweep, before opening a position. Under the ‘Liquidity Sweeps’ section in the settings, you can toggle on/off: Bullish Regular Sweeps - when disabled, Bullish Regular Sweeps won’t appear on your chart. Bearish Regular Sweeps - when disabled, Bearish Regular Sweeps won’t appear on your chart. 4️⃣Fair Value Gap Sweeps: The indicator automatically detects bullish and bearish Fair Value Gap sweeps (FVG Sweep) using the liquidity levels you have enabled. 🔹What is a FVG Sweep? A FVG Sweep is a specific type of liquidity sweep that not only clears liquidity above or below a key level, but also forms a Fair Value Gap (FVG) immediately afterward. The liquidity sweep shows where stop orders were triggered, areas where the market aggressively took out one side’s liquidity. The formation of a Fair Value Gap right after the sweep confirms that displacement followed. This means that the sweep was not just a stop hunt, but a deliberate move backed by momentum. In simple terms, a regular liquidity sweep only tells you that liquidity was taken. A FVG Sweep tells you that liquidity was taken and a strong directional move started immediately after, leaving an imbalance in price. That imbalance represents where aggressive buyers or sellers entered the market without enough opposite-side orders to keep price balanced. This combination adds a confirmation and intent behind regular liquidity sweeps. 🔹Bullish FVG Sweep The indicator automatically detects bullish FVG Sweeps when price takes out a Sellside Liquidity (SSL) level and then forms a bullish FVG within the next few candles. This sequence shows that sellers were stopped out and buyers immediately entered the market with momentum. 🔹Bearish FVG Sweep The indicator automatically detects bearish FVG Sweeps when price takes out a Buyside Liquidity (BSL) level and then forms a bearish FVG shortly after. This shows that short sellers’ stops were triggered, and new selling pressure entered the market right away. 🔹How to Use FVG Sweeps Unlike regular liquidity sweeps, FVG Sweeps can be used as trade entries because they confirm both liquidity being cleared and immediate momentum. A regular sweep only shows that stop-losses were triggered, but an FVG Sweep proves that price not only cleared liquidity but also moved away with momentum, leaving behind an imbalance (Fair Value Gap). This shift often marks the start of a new short-term trend. We’ll cover this in more detail in the Buy and Sell Signal section below, but in short, a bullish FVG Sweep can act as confirmation for a potential long entry after price takes out a low, while a bearish FVG Sweep can confirm a short entry after price takes out a high. The strongest FVG Sweeps come from extremely sharp reversals. On the chart, they look like a “V” shape for bullish setups or an inverted “V” shape for bearish setups. This shape shows how quickly momentum shifted after liquidity was cleared. When price instantly reverses and leaves a Fair Value Gap behind, it’s a clear sign that buyers or sellers stepped in aggressively and absorbed all available liquidity on the opposite side. In practice, traders often use FVG Sweeps as a trigger to align their bias. For example, after a bullish FVG Sweep, the focus shifts toward looking for long setups within the new imbalance or during a small retracement into the Fair Value Gap. After a bearish FVG Sweep, traders focus on short setups as price retraces back into the gap before continuing lower. The key takeaway is that FVG Sweeps show conviction. Under the ‘Liquidity Sweeps’ section in the settings, you can toggle on/off: Bullish FVG Sweeps - when disabled, Bullish FVG Sweeps won’t appear on your chart. Bearish FVG Sweeps - when disabled, Bearish FVG Sweeps won’t appear on your chart. Please Note: the settings you choose to use for Fair Value Gaps, under the ‘Fair Value Gaps’ section, will be used for FVG Sweeps. This is important because if you increase the sensitivity value for FVGs, not all FVG Sweeps will appear if the FVG’s size doesn’t meet the sensitivity threshold. 5️⃣Buy & Sell Signals: This indicator also plots Buy & Sell signals. These signals follow logic based on Atif Hussain’s FVG trading model. The entry requirements for a Long & Short signal are outlined below. 🔹Buy Signal: In order for a Buy Signal to generate, the following conditions must occur in order: Bullish FVG Sweep Price Retraces to the Bullish FVG 🔹Sell Signal: In order for a Buy Signal to generate, the following conditions must occur in order: Bearish FVG Sweep Price Retraces to the FVG 🔹Require Retracement: Under the ‘Signals’ section in the settings, you can toggle on/off the ‘Require Retracement’ setting. When disabled, a long/short signal will appear immediately after a Bullish or Bearish FVG Sweep, instead of waiting for price to retrace back to the gap. Please Note: the liquidity levels you enable under the ‘Liquidity Levels’ section will be the levels used for signals. Thus, if you only have the Previous Day Highs/Lows enabled, then only those levels will be used to generate buy/sell signals. Also, long Signals will only appear if Bullish FVG Sweeps are enabled, and Short Signals will only appear if Bearish FVG Sweeps are enabled. When a Buy Signal or Sell Signal is plotted, three suggested take-profit levels and one suggested stop-loss level are plotted. There are two different Take-Profit methods you can choose from within the indicator settings: Manual or Auto. 🔹Manual Take-Profit: If you’re using manual take-profit levels, you can customize the Risk-to-Reward (RR) for Take-Profit 1, 2, and 3 by adjusting the “RR 1”, “RR 2”, and “RR 3” settings. Setting RR 1 to 1 means take-profit 1 is a 1:1 risk-to-reward ratio. The stop-loss will always be placed at the recent low for Buy Signals, and at the recent high for Sell Signals. 🔹Auto Take-Profit: If you select to use Auto Take-Profit instead of Manual, then Take-Profit 1, 2, and 3 will be automatically determined based on nearby liquidity levels. The stop-loss will be placed at the recent low for Buy Signals, and at the recent high for Sell Signals. Take-Profit Levels 1, 2, and 3 will be placed at the three closest opposite liquidity levels. If the take-profit 2 and take-profit 3 levels are too far away, only one take-profit level will be displayed. 🔹Signal Settings: Long Signals: When enabled, long signals are shown. When disabled, long signals will not appear. Short Signals: When enabled, short signals are shown. When disabled, short signals will not appear. Require Retracement: When enabled, price must retrace to a FVG after a FVG Sweep in order for a signal to be generated. Take-Profit Levels: When enabled, take-profit levels (TP 1, TP 2, and TP 3) are shown with long/short signals. When disabled, take-profit levels and their price labels are not displayed. Take-Profit Labels: When enabled, take-profit labels are displayed when price reaches one of the three take-profit levels. When disabled, labels won’t appear when price reaches take-profit levels. Stop-Loss Levels: When enabled, stop-loss levels are shown for long/short signals. When disabled, the stop-loss level and its price label are not displayed. Stop-Loss Labels: When enabled, stop-loss levels are shown for long/short signals. When disabled, a label won’t appear when price reaches the stop-loss level. 6️⃣Alerts: The indicator supports alerts, so you never miss a key market move. You can choose to receive alerts for each of the following conditions: Bearish Liquidity Sweep Bullish Liquidity Sweep Bearish FVG Sweep Bullish FVG Sweep Long Signal Short Signal TP 1 TP 2 TP 3 Stop-Loss ‼️Important Notes: TradingView has limitations when running features on multiple timeframes, such as the liquidity levels, which can result in the following error: 🔹Computation Error: The computation of using MTF features are very intensive on TradingView. This can sometimes cause calculation timeouts. When this occurs, simply force the recalculation by modifying one indicator’s settings or by removing the indicator and adding it to your chart again. 🚩 UNIQUENESS: This indicator is unique because it identifies a specific type of liquidity event referred to as FVG Sweeps, where price takes liquidity and then immediately forms a Fair Value Gap in the opposite direction. These FVG Sweeps serve as the foundation of the model, and the script uses them as the required condition for generating Buy and Sell signals. Once an FVG Sweep is confirmed, the indicator automatically produces a fully defined trade idea with a stop-loss and up to three take-profit targets, following a consistent rule-based execution approach.
Indicador Pine Script®
por fluxchart
6
Pearson SL/TP📘 Description Pearson SL/TP — Advanced Correlation-Based Strategy with Full Risk Management The Pearson SL/TP indicator is an advanced market analysis tool that combines Pearson correlation, volatility-based stop/target levels, and dynamic signal strength evaluation. It is designed for traders who want to visualize potential momentum shifts and risk/reward zones in a single, integrated chart. 🔍 Core Concept This script measures the **Pearson correlation coefficient between recent price movements and time progression, highlighting potential trend exhaustion or momentum reversals when the correlation reaches extreme values. * High positive correlation (near +1) → price moving steadily upward → possible overbought condition. * High negative correlation (near -1) → price moving steadily downward → possible oversold condition. When these extremes are reached, and confirmed by several internal filters, the script generates LONG or SHORT signals with fully calculated Stop Loss and Take Profit levels. ⚙️ Main Features 📈 Signal Generation * Uses Pearson correlation as a primary indicator of trend intensity. * Detects potential reversal zones when correlation crosses user-defined thresholds. * Optional divergence confirmation enhances signal reliability. 💰 Risk Management * Stop Loss (SL) and Take Profits (TP1 & TP2) automatically adapt to volatility using the ATR (Average True Range). * Dynamic risk/reward ratios help assess trade quality. * Adjustable multipliers let you fine-tune your risk parameters. 🧠 Signal Strength Analysis Each signal is graded from Weak to Very Strong based on four factors: 1. Volume activity 2. Trend alignment 3. Pearson momentum 4. Correlation change intensity 🎨 Visualization * Overbought / Oversold background zones * Signal arrows (LONG / SHORT) * SL / TP** price levels and labels * Interactive dashboard** displaying: * Current Pearson value * Market state (Overbought / Oversold / Neutral) * Signal strength * Latest trade data (Entry, SL, TP1, TP2, Risk:Reward) 🔔 Alerts Built-in alerts for: * Confirmed LONG / SHORT signals * Bullish / Bearish divergences 🧩 Customization All major parameters — including **Pearson length, thresholds, ATR multipliers, and visual options — are fully customizable. This allows you to adapt the indicator to any market, timeframe, or trading style.
Indicador Pine Script®
por s47marsac
2
Power Balance ForecasterHey trader buddy! Remember the old IBM 5150 on Wall Street back in the 80s? :) Well, I wanted to pay tribute to it with this retro-style code when MS DOS and CRT screens were the cutting edge of technology... Analysis of the balance of power between buyers and sellers with price predictions What This Indicator Does The Power Balance Forecaster indicator analyzes the relationship between buyer and seller strength to predict future price movements. Here's what it does in detail: Main Features: Power Balance Analysis: Calculates real-time percentage of buyer power vs seller power Price Predictions: Estimates next closing level based on current momentum Market State Detection: Identifies 5 different market conditions Visual Signals: Shows directional arrows and price targets How the Trading Logic Works Power Balance Calculation: Analyzes Consecutive Bars - Counts consecutive bullish and bearish bars Calculates Momentum - Uses ATR-normalized momentum to measure trend strength Determines Market State - Assigns one of 5 market states based on conditions Market States: Bull Control: Strong uptrend (75% buyer power) Bear Control: Strong downtrend (75% seller power) Buying Pressure: Bullish pressure (65% buyer power) Selling Pressure: Bearish pressure (65% seller power) Balance Area: Market in equilibrium (50/50) Prediction System: Bullish Condition: Buyer power > 55% + Positive momentum = Bullish prediction Bearish Condition: Seller power > 55% + Negative momentum = Bearish prediction Price Target: Based on ATR multiplied by timeframe factor Configurable Parameters: Analysis Sensitivity (5-50): Controls how responsive the indicator is Low values (5-15): More sensitive, ideal for scalping High values (30-50): More stable, ideal for swing trading Table Position: Choose from 9 positions to display the data table Trading Signals: Green Triangle ▲: Bullish signal, price expected to increase Green Triangle ▼: Bearish signal, price expected to decrease Dashed Line: Shows the price target projection Label: Displays the exact target value Recommended Timeframes: Lower Timeframes (1-15 minutes): Sensitivity: 10-20 Automatic Low TF mode Higher Timeframes (1 hour - 1 day): Sensitivity: 25-40 Automatic High TF mode Important Notes: Always use this indicator in combination with: Market context analysis Proper risk management Confirmation from other indicators Mandatory stop losses The indicator works best in trending markets and may be less effective during extreme consolidation periods.
Indicador Pine Script®
por LanfryBil
ATH Retracement Levels### ATH Retracement Levels Indicator **Overview** The ATH Retracement Levels indicator is a powerful tool designed for technical analysts and traders seeking to identify key support zones during market pullbacks. By dynamically calculating the all-time high (ATH) of the instrument's price history, this indicator automatically plots horizontal retracement lines at -5%, -10%, -15%, and -20% below the ATH. These levels serve as potential support thresholds, helping traders anticipate price reactions and refine entry/exit strategies in trending or consolidating markets. **Key Features** - **Dynamic ATH Detection**: Continuously tracks and updates the highest high across the entire chart history for real-time relevance. - **Customizable Retracement Lines**: - **ATH Line** (Green, 2px): Marks the peak price for quick visual reference. - **-5% Level** (Red, 1px): Shallow pullback zone for early support testing. - **-10% Level** (Orange, 1px): Moderate retracement, often a psychological barrier. - **-15% Level** (Yellow, 1px): Deeper correction, signaling potential trend weakness. - **-20% Level** (Purple, 1px): Significant drawdown level, ideal for contrarian setups. - **Informative Labels**: On the latest bar, each level displays its precise price value (formatted to two decimal places) with color-coordinated tags for effortless interpretation. - **Pine Script v5 Optimized**: Built for efficiency with `max_lines_count=500` to handle extended timeframes without performance lag. Fully overlay-compatible for seamless integration with other indicators. **How to Use** Apply this indicator to any chart (stocks, forex, crypto, etc.) via TradingView's Pine Editor. It works best on daily or higher timeframes for long-term trend analysis but adapts to intraday views. Watch for price bounces or breakdowns at these levels to inform trades—e.g., buy on a -10% retest with bullish confirmation. For advanced users, the open-source code allows easy tweaks, such as adding more levels or alerts. Elevate your charting workflow with ATH Retracement Levels—precision meets simplicity for smarter trading decisions. Share your feedback or custom variations in the comments!
Indicador Pine Script®
por BruhM0ment