HY Buy Sell SignalHY Buy Sell Signal is an advanced trading indicator that functions as a complete trading system, not just a simple signal tool.
It includes:
✅ Automatic BUY / SELL signals
✅ Demand & Supply zones
✅ Anti-spam logic (one trade at a time)
✅ Multi-Timeframe (MTF) trade status
✅ Signal strength grading
✅ Automatic Entry, Stop Loss & Take Profit (RR-based)
✅ Dashboard & alerts
Moving Averages (Trend Filter)
Entry timing (MA20)
Trend confirmation (MA50)
Long-term trend direction (MA200)
📌 Price above MA50 = bullish bias
📌 Price below MA50 = bearish bias
Demand & Supply Zones
🟢 Demand Zone → Area where buyers are likely to enter
🔴 Supply Zone → Area where sellers are likely to enter
📌 These are dynamic zones, not fixed support/resistance.
Multi-Timeframe (MTF) Trade Status
Shows whether higher timeframes are still in BUY mode
Displayed as green/red dots in the MTF table
📌 Helps avoid trading against higher-timeframe trends.
🔥 Suitable for intraday and swing trading
Multitimeframe
MTF Zone Trading [SSAS] v2🔥 MTF Zone Trading System v2 🔥
A powerful Multi-Timeframe Engulfing Pattern Detection System that identifies high-probability trading zones across 8 timeframes (Monthly to 5-Minute) with automatic MTF confluence detection, RSI divergence analysis, and a smart alert system.
═══════════════════════════════════════════════════════
🎯 KEY FEATURES
═══════════════════════════════════════════════════════
✅ Multi-Timeframe Zone Detection (M, W, D, 4H, 2H, 1H, 15M, 5M)
✅ Automatic MTF Confluence Detection (2-5+ TF zones overlapping)
✅ RSI Divergence Detection (Regular + Hidden)
✅ Smart Entry System with SL/TP Management
✅ Color-Coded Zones by Timeframe
✅ Ready & Touch Alert System
✅ Master Alerts (2 alerts cover everything!)
✅ Real-time RSI Dashboard
═══════════════════════════════════════════════════════
📊 HOW IT WORKS
═══════════════════════════════════════════════════════
1️⃣ ZONE CREATION
• Detects Engulfing Bullish (EB) and Engulfing Sell (ES) patterns
• EB Zone: 1st Bearish + 2nd Bullish candle (Close > High of 1st)
• ES Zone: 1st Bullish + 2nd Bearish candle (Close < Low of 1st)
• Zone = 1st candle's High-Low range
2️⃣ ZONE VALIDITY
• EB zones only shown BELOW current price (Support)
• ES zones only shown ABOVE current price (Resistance)
• Zones auto-delete when price touches them
3️⃣ MTF CONFLUENCE
• When a higher TF zone contains lower TF zones inside
• More overlapping zones = Stronger signal
• MTF ZONE (2 TF) → STRONG MTF (3 TF) → VERY STRONG MTF (4 TF) → SUPER MTF (5+ TF)
4️⃣ ENTRY SIGNALS
• Price touches zone + Confirmation EB/ES pattern = Entry
• Automatic SL (below/above recent swing)
• Automatic TP (based on Risk:Reward ratio)
═══════════════════════════════════════════════════════
🎨 COLOR SCHEME
═══════════════════════════════════════════════════════
🩷 Monthly - Pink/Magenta
💜 Weekly - Purple
💙 Daily - Blue
🧡 4H - Orange
💛 2H - Yellow
🩵 1H - Cyan
🟢 15M - Green
🟢 5M - Light Green
═══════════════════════════════════════════════════════
🔔 ALERT SYSTEM
═══════════════════════════════════════════════════════
MASTER ALERTS (Recommended - saves alert limit):
• 🎯 ALL ZONE TOUCH - Any zone touch
• 🚀 ALL ENTRY SIGNALS - Any BUY/SELL entry
INDIVIDUAL ALERTS:
• Ready alerts (price approaching zone)
• Touch alerts (price touching zone)
• Separate BUY/SELL alerts
═══════════════════════════════════════════════════════
⚙️ SETTINGS
═══════════════════════════════════════════════════════
TIMEFRAME SCANNING: Enable/disable each timeframe
ENTRY SETTINGS: Confirmation TF, SL Buffer, TP Ratio
RSI SETTINGS: Length, Divergence display options
ZONE COLORS: Customize colors for each timeframe
ALERT SETTINGS: Ready distance, Enable/disable alerts
═══════════════════════════════════════════════════════
📈 BEST PRACTICES
═══════════════════════════════════════════════════════
• Use on 15M or 5M chart for intraday trading
• Focus on MTF zones (2+ timeframes) for higher probability
• Combine with RSI divergence for confirmation
• Use master alerts to save TradingView alert limits
• Always use proper risk management
### 1. MTF CONFLUENCE DETECTION
When multiple timeframe zones overlap, the system automatically detects and labels them:
| Overlap | Label | Strength |
|---------|-------|----------|
| 2 TF zones | MTF ZONE | Good |
| 3 TF zones | ⭐ STRONG MTF | Better |
| 4 TF zones | ⭐⭐ VERY STRONG MTF | Great |
| 5+ TF zones | ⭐⭐⭐ SUPER MTF | Best |
**Example**: If a Weekly ES zone contains a Daily ES zone and a 4H ES zone inside it, the Weekly zone will be labeled as "⭐ STRONG MTF (3 TF)"
### 2. RSI DIVERGENCE
The indicator detects 4 types of RSI divergence:
| Type | Price | RSI | Signal | Line Style |
|------|-------|-----|--------|------------|
| 🟢 Regular Bullish | Lower Low | Higher Low | Buy | Solid Green |
| 🟡 Hidden Bullish | Higher Low | Lower Low | Buy (Trend) | Dashed Lime |
| 🔴 Regular Bearish | Higher High | Lower High | Sell | Solid Red |
| 🟠 Hidden Bearish | Lower High | Higher High | Sell (Trend) | Dashed Orange |
### 3. ENTRY SYSTEM
**Entry Conditions**:
1. Price touches a fresh zone
2. Confirmation EB/ES pattern forms on lower timeframe
3. Entry is taken at candle close
**Stop Loss**:
- BUY: Below the lower of last 2 candles - buffer
- SELL: Above the higher of last 2 candles + buffer
**Take Profit**:
- Based on Risk:Reward ratio (default 1:2)
### 4. SETTINGS EXPLAINED
#### Timeframe Scanning
- Enable/disable each timeframe (M, W, D, 4H, 2H, 1H, 15M, 5M)
- Disable lower timeframes on higher TF charts to reduce clutter
#### Entry Settings
- **Confirmation TF**: Timeframe for entry confirmation patterns
- **SL Buffer**: Extra points added to stop loss
- **TP Ratio**: Risk:Reward ratio for take profit
#### RSI Settings
- **RSI Length**: Period for RSI calculation (default 14)
- **Show RSI Divergence**: Toggle divergence display
- **Show Regular/Hidden Divergence**: Filter divergence types
- **Pivot Lookback**: Bars to look back for pivot detection
#### Alert Settings
- **Ready Alert Distance**: Points away from zone to trigger ready alert
- **Enable Ready/Touch Alert**: Toggle alert types
### 5. ALERT SETUP
#### Recommended: Master Alerts (2 alerts only)
1. Right-click on chart → "Add Alert"
2. Condition: "MTF Engulfing Zone System v2"
3. Select "🎯 ALL ZONE TOUCH" for zone notifications
4. Create another alert for "🚀 ALL ENTRY SIGNALS"
#### Individual Alerts (for specific filtering)
- Ready alerts for each zone strength level
- Touch alerts for each zone strength level
- Separate BUY and SELL entry alerts
### 6. BEST TRADING PRACTICES
1. **Chart Timeframe**: Use 15M or 5M for intraday, 1H or 4H for swing
2. **Focus on MTF Zones**: Higher confluence = Higher probability
3. **Wait for Confirmation**: Don't enter just on zone touch
4. **Use RSI Divergence**: Additional confirmation
5. **Risk Management**: Never risk more than 1-2% per trade
6. **Market Context**: Consider overall trend direction
### 7. TROUBLESHOOTING
**Too many zones on chart?**
- Disable lower timeframes (5M, 15M)
- Increase chart timeframe
**Zones not appearing?**
- Check if timeframe is enabled in settings
- Ensure sufficient historical data is loaded
**Alerts not firing?**
- Verify alert is created correctly
- Check if alert conditions are enabled in settings
═══════════════════════════════════════════════════════
⚠️ DISCLAIMER
═══════════════════════════════════════════════════════
This indicator is for EDUCATIONAL PURPOSES ONLY. It is not financial advice. Trading involves substantial risk of loss. Past performance does not guarantee future results. Always do your own research and consult a financial advisor before trading.
**IMPORTANT RISK DISCLOSURE**
This indicator ("MTF Engulfing Zone System v2") is provided for **EDUCATIONAL AND INFORMATIONAL PURPOSES ONLY**. It is not intended to be and should not be construed as financial advice, investment advice, trading advice, or any other type of advice.
**NO GUARANTEE OF PROFITS**: The use of this indicator does not guarantee profits or protect against losses. Trading in financial markets involves substantial risk of loss and is not suitable for all investors.
**PAST PERFORMANCE**: Past performance of any trading system or methodology is not necessarily indicative of future results. Historical results shown by this indicator should not be interpreted as a promise or guarantee of future performance.
**NOT A RECOMMENDATION**: Nothing contained in this indicator or its documentation constitutes a recommendation to buy, sell, or hold any security, financial product, or instrument.
**DO YOUR OWN RESEARCH**: Before making any investment decisions, you should conduct your own research, review your financial situation, and consult with a qualified financial advisor.
**RISK WARNING**:
- Trading foreign exchange, CFDs, cryptocurrencies, and other financial instruments on margin carries a high level of risk
- You may sustain a loss of some or all of your invested capital
- You should not invest money that you cannot afford to lose
- The leverage associated with trading can work against you as well as for you
**LIABILITY**: The developer of this indicator ("Shiv Shakti Algo Systems") shall not be liable for any direct, indirect, incidental, special, or consequential damages arising out of the use of this indicator.
By using this indicator, you acknowledge that you have read, understood, and agree to this disclaimer.
© 2024 Shiv Shakti Algo Systems | All Rights Reserved
#MTF #Engulfing #SupplyDemand #SmartMoney #TradingZones #RSIDivergence #Confimation Entry #Order Block #Panding Order
HUY - Williams Structure (MTF)Description:
This indicator plots the “Williams Structure” as an MTF (multi-timeframe) overlay directly on the chart. It marks confirmed structure highs and lows and can optionally display retrace lines as well as a swing connection (Low→High→Low→…).
In addition, it shows the current break streak (e.g., Long x2 / Short x1) to quickly identify consecutive breaks.
The structure timeframe is freely selectable.
An optional auto-scaling feature can be used if symbol feeds have different price scaling.
All visual elements (lines, colors, styles, labels, swing path) can be toggled on/off individually.
Notes:
No trading signals / no orders: structure visualization only.
Non-repainting in the sense of confirmation (pivots/states are updated only after confirmation).
For very long histories, a line limit can be set to save resources.
Rishii's EMA Trend EngineThis indicator is a dual-EMA trend framework designed to improve intraday decision-making by filtering out sideways market noise and highlighting only meaningful trend participation.
It uses a fast and slow EMA to define trend direction, while applying an HLC3-based color logic to show whether price is respecting each EMA. Candles turn green or red only when both the trend alignment and price participation conditions are satisfied. Neutral candles can be shown in white to visually remove noise and make valid candles stand out.
Additional filters such as EMA slope detection and optional higher-timeframe bias help avoid false signals during ranging conditions. A background trend zone and first-candle markers after EMA crossover further improve clarity without cluttering the chart.
How it helps
Clearly shows when the market is trending vs sideways
Highlights only those candles where price is truly participating in the trend
Filters out most whipsaws caused by flat EMAs BITSTAMP:BTCUSD
Combines trend bias, momentum, and participation in one clean view
Caution
This is a trend-following tool, not a reversal indicator.
When EMAs are flat and candles turn white, avoid trading
Do not treat every green/red candle as an entry; wait for proper structure.
Always use proper stop-loss and position sizing.
Fair Value Interest Rate LadderDisplays the remaining interest rate relative to a specific expiration date. Compatible with both ascending and descending price trends (toggleable in Settings). The smooth decay visualization offers better clarity compared to standard daily horizontal levels.
THAI TRENDINGVolume is the total amount of assets traded in a specific period of time. The 24-hour Volume indicator is used to measure the total volume of a symbol traded in the last 24 hours, expressed as in currency. It can be used to measure the market's interest in a particular symbol.
Optional Pro Bottom IndicatorOptional Pro Bottom Indicator is a combination of 3 indicators where
1) Hybrid Volume Price Indicator with Higher Time Frame ( Red color)
2) Hybrid Volume Price Indicator with lower time frame ( Blue Color)
3) Volume Indicator ( Lime color Line)
4) Index Indicator ( Yellow color Line)
This set of 4 Indicators are prepared using 1) WAP of Volume , 2) Price Indicator 3) OB Volume 4) a combination of the above indicators used to create a Hybrid Indicators of a) Higher time frame B) lower time frame are used.
Usage :
1)The volume Indicator is used to analyze the Volume Support for the Price Move upside and down side will be estimated.
2)The Index Indicator is used to analyze the Price Move for intraday or Swing Trade to spot the
Trend
3)The HTF indicator is to be used for breakout of the Price in the intraday trading
4)The lower Time frame indicator is to be used the time of Entry in the intraday / swing trade.
RSI 1H/4H Multi-Level (REPAINT) - Hourly LimitWhat the script does
1) Indicator setup
Creates an overlay indicator named “RSI 1H/4H Multi-Level (REPAINT) - Hourly Limit” (overlay=true), so markers appear on the main price chart.
2) Inputs (user settings)
1 Hour Settings
len1h: RSI length for 1H (default 12)
lowL1h: lower threshold (default 30)
highL1h: upper threshold (default 70)
color1h: dot color for 1H-only triggers (default blue)
4 Hour Settings
len4h: RSI length for 4H (default 12)
lowL4h: lower threshold (default 30)
highL4h: upper threshold (default 70)
color4h: dot color for 4H-only triggers (default orange)
Visuals
showDots: toggle to show/hide dots on the chart
3) RSI calculation from higher timeframes (repainting)
Function:
rsi_htf(tf, length) uses request.security() to compute RSI from a higher timeframe:
gaps_off merges gaps smoothly
lookahead_on allows future higher-timeframe values to appear on earlier bars → repainting behavior
It calculates:
rsi1h = 1H RSI
rsi4h = 4H RSI
4) Alert frequency control (once per hour)
lastAlertHour stores the timestamp of the last alerted hourly candle start.
currentHourStart = time("60") gets the start time of the current 1-hour candle.
canAlert = currentHourStart > lastAlertHour ensures the script can only trigger once per new hour.
5) Cross conditions
Uses ta.cross() to detect RSI crossing either level (in either direction):
c1L: 1H RSI crosses the 1H lower level
c1H: 1H RSI crosses the 1H upper level
c4L: 4H RSI crosses the 4H lower level
c4H: 4H RSI crosses the 4H upper level
Then:
fire1h is true if either 1H cross happens
fire4h is true if either 4H cross happens
trigger is true if (1H or 4H cross) AND canAlert is true
6) Alert message and timer update
When trigger is true:
Updates lastAlertHour to the current hour start (blocks further alerts that hour)
Builds an English message indicating which timeframe(s) crossed and includes RSI values
Sends an alert with alert.freq_once_per_bar_close (one per bar close)
7) Chart visualization (dots)
Chooses dot color:
white if both 1H and 4H crossed within the allowed hour
color1h if only 1H crossed
color4h if only 4H crossed
Plots a small circle below the bar when showDots and trigger are true.
MTF Trend MAs (H1+H4) MTF Trend MAs (H1+H4) — per-line styles
This indicator plots three trend moving averages (20 / 50 / 200) from two higher timeframes (H1 and H4) directly on your current chart. It is designed to help you monitor multi-timeframe dynamic support/resistance levels and overall trend structure without switching charts.
Features
Multi-timeframe overlay
Plots H1 and H4 moving averages on any chart timeframe.
Three MA sets
Fast: 20
Mid: 50
Slow: 200
Configurable MA types
Choose the calculation type for each MA length: EMA / SMA / WMA / RMA.
Independent visibility toggles
Enable/disable each individual line:
H1 20 / 50 / 200
H4 20 / 50 / 200
Per-line styling
For every MA and timeframe you can set:
Color
Line width
Line style (Solid / Dashed / Dotted)
Notes / Limitations
The script uses request.security(..., lookahead_off) to avoid repainting from future data.
TradingView plot() does not support true dashed/dotted line rendering like line.new().
In this script the style options are approximations:
Solid = normal line
Dashed = linebr (broken/stepped appearance)
Dotted = circles
If you need true dashed/dotted styles, the indicator can be rewritten using line.new() for real line styles.
MTF EMA Grid (4 TF vs 4 EMA)This script will add EMA levels from multi-timeframe to your chart! Up to 4 TimeFrame and up to 4 EMA Lenghts.
RSI 1H/4H Multi-Level (REPAINT) - Hourly LimitRSI 1H/4H Multi-Level (REPAINT) – Hourly Limit is a Pine Script v5 indicator designed to monitor RSI level crossings on two higher timeframes (1H and 4H) while controlling alert frequency to avoid spam. The script can display visual dots on the chart and trigger a single consolidated alert message when either timeframe’s RSI crosses user-defined levels—limited to once per hour.
Key features
1) Dual timeframe RSI monitoring (1H + 4H)
Calculates RSI on 1-hour (60) and 4-hour (240) timeframes independently.
Each timeframe has its own configurable settings:
RSI Length
Lower level (commonly oversold, e.g., 30)
Upper level (commonly overbought, e.g., 70)
Dot color for chart marking
2) Multi-level cross detection
The indicator tracks when RSI crosses either boundary level:
1H RSI crosses its Lower or Upper level
4H RSI crosses its Lower or Upper level
A trigger occurs if any of these crossings happens.
3) Hourly alert limiter (anti-spam)
To prevent repeated alerts, the script includes an hourly cooldown:
It stores the start time of the last hour when an alert was fired.
A new alert can only fire when the current hour start time is greater than the last recorded one.
Result: maximum 1 alert per hour, even if multiple crossings occur within the same hour.
4) Consolidated alert message
When triggered, the script builds a single message that can include:
1H RSI value if the 1H crossing occurred
4H RSI value if the 4H crossing occurred
Example message format:
1H RSI (52.34) crossed level; 4H RSI (48.10) crossed level;
5) On-chart visualization with priority coloring
If enabled, the script plots a dot below the bar on trigger:
White dot if both 1H and 4H signals fired in the same hour
1H color if only 1H fired
4H color if only 4H fired
Important note: REPAINT behavior
This indicator intentionally uses request.security(..., lookahead=barmerge.lookahead_on), meaning it can repaint because it references higher-timeframe data with lookahead enabled. As a result:
Cross signals may appear earlier than they would in a non-repainting implementation.
Signals can change as the higher timeframe candle evolves.
Typical use cases
Monitoring overbought/oversold zone transitions on higher timeframes while trading lower timeframes.
Receiving fewer, cleaner alerts thanks to the hourly limit.
Quickly identifying whether a signal came from 1H, 4H, or both using dot colors.
[AboBassel] RS + RS.ROC + Inverted ATR (Unified Channel)
This is a multi-indicator channel tool combining Relative Strength (RS), RS Rate of Change (RS.ROC), and Inverted ATR Percentage (ATRP) into a single unified channel for clear visual trend analysis.
Features:
• All three lines are normalized into one visual channel with five distinctive threshold levels (Upper/Lower Curbs, Inner Bands, and Middle).
• RS , ATR , ROC Lines all are invertable for better follow up on trends
• RS.ROC period and timeframe are editable independently from RS.
• ATR time frame and lookback period are fully adjustable.
• Channel thresholds are fully editable. Lines can exceed upper/lower curbs, showing extreme conditions.
• Suitable for trend detection, swing trading, and risk assessment.
Usage Tips:
• Look for lines crossing bands or curbs for potential trade setups.
• Observe background color for overall market sentiment.
• Major blue arrows indicate strong shifts in trend direction.
Ideal For: Swing traders, trend followers, and advanced technical analysts who want combined momentum, volatility, and relative strength insights in a single chart.
FVG MTF Boxes FVG MTF Boxes — Fair Value Gaps Across Multiple Timeframes
This overlay detects Fair Value Gaps (FVGs) using a 3-bar pattern and draws them as boxes on your chart. You can run detection on several timeframes at once (Chart, 2m, 5m, 15m, 1h) and see all gaps in one place. Each gap is labeled from the timeframe it is detected on.
What it does
• Finds bullish and bearish FVGs (imbalances) on each selected timeframe.
• Draws boxes for each gap; colors show status: Unfilled (green/red), Partial (yellow), Filled (gray), and Inverse (filled gap broken and acting as support/resistance).
• Optional Fib tagging highlights gaps near Asia-session Fibonacci levels.
• Border color shows which timeframe each gap came from (Chart, 2m, 5m, 15m, 1h).
How to use it for setups
1. Timeframe selection — Turn on the timeframes you trade (e.g. 5m + 15m). Chart TF is your current chart; others add higher- or lower-timeframe context.
2. Unfilled zones — Treat unfilled bull (green) and bear (red) boxes as potential support and resistance. Price often returns to fill these imbalances.
3. Fib-tagged gaps — When "Tag Gaps Created on Fib Levels" is on, gold/purple boxes mark gaps near key Fib levels; these often get more respect and can be used for entries or targets.
4. Partial fill — Yellow means price is inside the gap; watch for full fill (gray) or rejection for continuation.
5. Inverse zones — After a gap is filled and price breaks through, the box turns inverse (e.g. bull gap → red resistance). Use these as S/R for reversals or confirmation.
6. Extend options — Use "Extend Boxes to Current Bar" for a live right edge, or "Extend Until Filled" / "Extend While Price Testing" to keep boxes only where they're relevant.
Quick tip: Stack 2–3 timeframes (e.g. 5m + 15m) and look for overlapping or nested FVG boxes; confluence there often gives higher-probability entries.
MTF EMA Traffic Light System Trend Alignment for ScalpersMTF EMA Traffic Light – Trend Bias System
This indicator is designed to help traders quickly identify high-probability trend alignment using multiple timeframes and EMAs.
It analyzes price relative to the 13 EMA and 55 EMA on:
1 Minute
5 Minute
15 Minute
1 Hour
4 Hour
Then it converts that data into a simple Traffic Light system to guide trade decisions.
🚦 How It Works
Each timeframe is classified as:
🟢 BULL – Price above both EMAs
🔴 BEAR – Price below both EMAs
🟡 MIXED – No clear direction
The system focuses on lower-timeframe alignment:
When 1m + 5m + 15m are aligned → Strong setup
When mixed → Caution
When misaligned → Stand aside
🟢 GREEN State (Full Trade Mode)
Triggered when:
✔ 1m, 5m, and 15m are all BULL → Long Bias
✔ 1m, 5m, and 15m are all BEAR → Short Bias
Rules:
Full position size
Trade with trend
Look for EMA pullbacks
Let winners run
🟡 YELLOW State (Caution Mode)
Triggered when:
✔ Lower timeframes are mixed
Rules:
Reduce size
Take quick profits
No holding
Defensive trading
🔴 RED State (No Trade)
Triggered when:
✔ No clear alignment
Rules:
Stay out
Mark key levels
Protect capital
📋 Dashboard Panel
The indicator displays a real-time table showing:
Each timeframe’s bias
Overall market state
Trade rules
This allows you to read market structure in seconds without switching charts.
🎯 Best Use
This tool works best for:
✔ Scalping
✔ Intraday trading
✔ Trend continuation setups
✔ EMA pullback strategies
Recommended for:
Forex
Indices
Gold
Crypto
⚠️ Risk Disclaimer
This indicator is a decision-support tool, not a guarantee of profits.
Always use:
Proper risk management
Stop losses
Personal trade rules
Never risk more than you can afford to lose.
Best Buying & Selling Flip Zone @MaxMaserati 3.0Best Buying & Selling Flip Zone 3.0 🐂🐻
Best Buying & Selling Flip Zone 3.0 is an advanced, multi-timeframe Price Action tool designed to identify high-probability institutional supply and demand zones.
By analyzing candle range and body size (Expander vs. Normal candles), this indicator categorizes market structure shifts into three distinct tiers of strength (A+++, A++, A+). It includes a built-in Trade Manager, Volume Tracking, and a unique "Defender/Attacker" Multi-Timeframe (MTF) entry confirmation system.
🚀 Key Features
Multi-Timeframe Analysis: Monitor Higher Timeframe (HTF) zones while trading on a Lower Timeframe (LTF).
Tiered Setup Grading: Automatically classifies zones based on the strength of the candle engulfing action (King Slayer, Crusher, Drift).
Smart Entry Confirmation: The script can wait for price to tap an HTF zone and then automatically search for a confirmation pattern on the current timeframe before signaling a trade.
Built-in Trade Management: Visualizes Entry, Stop Loss (SL), and Take Profit (TP) levels with customizable Risk:Reward ratios.
Volume Tracking: Monitors the volume utilized to create a zone and tracks "remaining" volume as price tests the zone.
Zone Deletion Logic: Automatically removes zones that have been invalidated by either a wick or a candle close.
🧠 How It Works: The "A-Grade" Logic
The indicator analyzes candles based on their body-to-range ratio to define "Expander" (Explosive move) vs. "Normal" candles. It then looks for engulfing behaviors to create zones:
A+++ (King Slayer):
Logic: A Bullish Expander engulfs a Bearish Expander (or vice versa).
Significance: This is the strongest signal, indicating a massive shift in momentum where aggressive buyers completely overwhelmed aggressive sellers.
A++ (Crusher):
Logic: A Bullish Expander engulfs a Bearish Normal candle.
Significance: Strong momentum overcoming standard price action. High probability.
A+ (Drift):
Logic: A Bullish Normal candle engulfs a Bearish Normal candle.
Significance: A standard flip zone. Good for continuation plays but less aggressive than KS or CR setups.
🛠️ Functionality Guide
1. General Filters & Timeframes
Higher Timeframe: Select a timeframe higher than your chart (e.g., Select 4H while trading on 15m). The indicator will draw the major zones from the 4H.
Deletion Logic:
Wick (Hard): Zone is removed immediately if price touches the invalidation level.
Close (Soft): Zone is removed only if a candle closes past the invalidation level.
2. LTF Entry Confirmation (The "Master" Switch)
When Show LTF Entry Logic is enabled, the indicator does not signal immediately upon an HTF zone creation. Instead:
It waits for the price to retraced and touch the HTF zone.
Once touched, it scans the current timeframe for a valid flip setup (KS, CR, or DR).
It creates a tighter entry box and draws trade lines only when this confirmation occurs.
3. Trade Management
Risk:Reward: Set your desired RR (e.g., 2.0).
SL Padding: Add breathing room (ticks) to your Stop Loss.
SL Source: Choose between a safer Stop Loss (based on the HTF zone) or a tighter Stop Loss (based on the LTF confirmation candle).
4. Volume Stats
Labels display the volume involved in the zone's creation. As price taps the zone, the volume is "depleted" from the label, giving you insight into the remaining order flow absorption.
🎨 Visual Customization
Colors: Fully customizable colors for Buyers (Green) and Sellers (Red) zones across all three strength tiers.
Labels: Toggle technical names, touch counts, and timeframe labels.
Lines: Option to show "Aggressive Open Lines" to mark the exact opening price of the flip zone extended forward.
⚠️ Disclaimer
This tool is for educational purposes and chart analysis assistance only. Past performance of a setup (A+++/King Slayer) does not guarantee future results. Always manage risk and use this in conjunction with your own trading strategy.
TheStrat Suite Lite: Combos, Targets, and Take Action WindowsTheStrat Suite Lite automates the detection, visualization, and marking of price action setups based on TheStrat methodology (developed by Rob Smith) on whatever timeframe you're viewing.
The guiding principle: show only the most valuable information. Rather than cluttering charts with every possible level and signal, the indicator uses logic based on user settings to determine what's relevant and worth displaying at any given moment.
WHAT IT DOES
The indicator identifies candle combinations (combos), actionable signals (inside bars, hammers, shooters), Failed 2s (range reclaims), and calculates magnitude and exhaustion targets — then draws entries, targets, and take action windows directly on your chart. A real-time data table displays combo status and bar types at a glance.
HOW IT WORKS
Candle Classification Logic
Each closed candle is classified by comparing its high and low to the prior candle's range. A candle entirely within the prior range is type 1 (inside). A candle that exceeds one side is type 2 (directional). A candle that exceeds both sides is type 3 (outside). Directional bias (u/d) is determined by comparing close to open. A Failed 2 (also known as a Range Reclaim, 2d Green, or 2u Red) occurs when a directional candle breaks one side of an inside bar but fails to continue, reversing back through the opposite side.
Hammer and Shooter Detection
The indicator offers three detection methods. Classic requires the candle to breach the prior candle's high or low but close back inside the prior range. Pin Bar adds a wick-to-body ratio requirement, filtering for candles where the rejecting wick is significantly longer than the body. Broad relaxes the close requirement, allowing the close to be near (not strictly inside) the prior range. Users select which method matches their trading style.
Failed 2 / Range Reclaim Detection
A Failed 2 occurs when price breaks one side of an inside bar (type 1) but reverses through the opposite side. The indicator provides four detection methods. Open flags the setup when the reversal candle opens beyond the broken level. Reclaim flags when price closes back through the opposite side of the inside bar's range. Both requires both conditions (open beyond AND close reclaim). Either flags when either condition is met. This configurability lets traders match detection to their preferred confirmation style.
Level Hierarchy and Deduplication
When levels occur at similar prices, the indicator applies a priority system. Actionable signals (inside bars, hammers, shooters with defined triggers) take priority over static reference levels. This prevents chart clutter while preserving the most relevant information.
Intelligent Label Adaptation
Labels dynamically update as market structure changes. When a magnitude target coincides with a trigger level, the label consolidates to reflect both roles. When levels are hit, invalidated, or superseded, labels update color and text to reflect current status rather than disappearing — preserving context for the trader.
Take Action Windows
When a signal forms, the indicator highlights the period during which that signal remains active. This visual window reminds traders when a setup is "in force," providing a frame of reference for managing entries.
IMPLEMENTATION DETAILS
This implementation addresses several practical challenges traders face.
Configurable detection methods: Hammer/shooter and Failed 2 detection aren't one-size-fits-all. The four Failed 2 methods and three hammer/shooter definitions let traders match the indicator to their specific confirmation requirements rather than accepting a single rigid definition.
Dynamic level management: Levels don't just appear and disappear — they adapt. A target becoming a trigger, a level being hit, or a setup invalidating all produce specific visual feedback rather than simply removing information. This preserves market context as price develops.
Performance optimization: The implementation limits historical depth on intensive calculations to maintain fast load times without sacrificing real-time functionality.
HOW TO USE IT
Setup
Enable or disable specific bar combinations you want to see (e.g., 2-1, 3-2, etc.). Configure your preferred hammer/shooter and Failed 2 detection methods.
Reading the Display
Solid lines represent reference levels (prior high/low). Dashed lines represent actionable triggers. Color indicates direction (configurable) and status (hit, failed, active). Labels show level type and price. The data table shows current combo and bar type.
DEFINITIONS
Combo: Two or more numbers representing the relationship between consecutive candles (e.g., 2-1, 3-2, 2-1-2). Each number indicates the candle type in sequence.
Candle Types: 1 = Inside, 2 = Directional, 3 = Outside.
Directional Bias: u = price above open, d = price below open.
C1/C2: C1 is the most recent closed candle, C2 is two bars back.
Magnitude: The measured move target, typically the C2 high or low.
Exhaustion: Extended targets beyond magnitude, indicating potential reversal zones.
KNOWN LIMITATIONS
Exhaustion calculations are limited to recent bars for performance.
Label overlap at similar price levels is a TradingView rendering limitation.
Trading involves risk. This is a charting tool, not financial advice. Past performance does not guarantee future results.
Elite Sniper HTF Bias LineMake sure you are on the right side of the trade. Best suited for 5-minute timeframe.
ARZ LIQ LEVELSARZ LIQ LEVELS is a liquidity-focused Volume Profile tool that maps where the market has traded the most (and the least) over a customizable lookback range. It highlights key high-volume nodes (HVN), low-volume nodes (LVN), and optional peak/trough clusters, while also plotting the main institutional reference levels: POC (Point of Control), VAH (Value Area High), and VAL (Value Area Low).
Use it to identify acceptance vs. rejection, locate high-probability reaction zones, and build clean trade plans around volume-based support/resistance.
TheStrat Suite: Multi-Timeframe Price Action Signals w/ AlertsTheStrat Suite automates the detection, visualization, and alerting of price action setups based on TheStrat methodology (developed by Rob Smith) across up to six configurable timeframes simultaneously.
The guiding principle: show only the most valuable information. Rather than cluttering charts with every possible level and signal, the indicator uses logic based on user settings to determine what's relevant and worth displaying at any given moment.
WHAT IT DOES
The indicator identifies candle combinations (combos), actionable signals (inside bars, hammers, shooters), Failed 2s (range reclaims), and calculates magnitude and exhaustion targets — then draws entries, targets, and take action windows directly on your chart. A real-time data table displays combo status, bar types, and Full Timeframe Continuity (FTFC) across all enabled timeframes. Alerts can be filtered by timeframe continuity, signal type, or Domino setups.
HOW IT WORKS
Multi-Timeframe Data Architecture
The indicator requests OHLC data from up to six user-configured timeframes in a single pass, then processes each timeframe's candle relationships independently. This allows the 5-minute, 60-minute, daily, and weekly structure to coexist on one chart without switching views.
Candle Classification Logic
Each closed candle is classified by comparing its high and low to the prior candle's range. A candle entirely within the prior range is type 1 (inside). A candle that exceeds one side is type 2 (directional). A candle that exceeds both sides is type 3 (outside). Directional bias (u/d) is determined by comparing close to open. A Failed 2 (also known as a Range Reclaim, 2d Green, or 2u Red) occurs when a directional candle breaks one side of an inside bar but fails to continue.
Hammer and Shooter Detection
The indicator offers three detection methods. Classic requires the candle to breach the prior candle's high or low but close back inside the prior range. Pin Bar adds a wick-to-body ratio requirement, filtering for candles where the rejecting wick is significantly longer than the body. Broad relaxes the close requirement, allowing the close to be near (not strictly inside) the prior range. Users select which method matches their trading style.
Failed 2 / Range Reclaim Detection
A Failed 2 occurs when price breaks one side of an inside bar (type 1) but reverses through the opposite side. The indicator provides four detection methods. Open flags the setup when the reversal candle opens beyond the broken level. Reclaim flags when price closes back through the opposite side of the inside bar's range. Both requires both conditions (open beyond AND close reclaim). Either flags when either condition is met. This configurability lets traders match detection to their preferred confirmation style.
Level Hierarchy and Consolidation
When multiple timeframes produce levels at similar prices, the indicator intelligently consolidates them into combined labels rather than hiding important information. Higher timeframes take display priority over lower timeframes — a weekly level takes precedence over a daily level at the same price — but both are represented in the consolidated label. Actionable signals (inside bars, hammers, shooters with defined triggers) take priority over static reference levels. This prevents chart clutter while preserving all relevant information in a readable format.
Intelligent Label Adaptation
Labels dynamically update as market structure changes. When a magnitude target from one timeframe coincides with a trigger level from another, the label consolidates to reflect both roles (e.g., "W MAG + D Trigger"). When levels are hit, invalidated, or superseded, labels update color and text to reflect current status rather than disappearing — preserving context for the trader.
Full Timeframe Continuity (FTFC) Filtering
FTFC status is calculated by evaluating directional bias across all enabled timeframes. When all timeframes show bullish bias (closing up relative to open), FTFC is bullish. When all show bearish bias, FTFC is bearish. Mixed bias means no continuity. Users can filter signals to only appear when FTFC aligns with the signal direction, reducing noise during consolidation.
Take Action Windows
When a signal forms on a higher timeframe, the indicator highlights the period during which that timeframe's candle remains open. This visual window reminds traders when a setup is "in force," providing a frame of reference for seeking entries on smaller timeframes.
Domino Detection
A Domino setup occurs when a signal on one timeframe can trigger another signal on an adjacent timeframe. The indicator detects and alerts on these conditions.
IMPLEMENTATION DETAILS
This implementation addresses several practical challenges traders face.
Multi-timeframe consolidation: Rather than constantly switching chart timeframes or mentally tracking multiple structures, all analysis exists in one view with intelligent deduplication when levels overlap.
Configurable detection methods: Hammer/shooter and Failed 2 detection aren't one-size-fits-all. The four Failed 2 methods and three hammer/shooter definitions let traders match the indicator to their specific confirmation requirements rather than accepting a single rigid definition.
Dynamic level management: Levels don't just appear and disappear — they adapt. A target becoming a trigger, a level being hit, or a setup invalidating all produce specific visual feedback rather than simply removing information. This preserves market context as price develops.
Alert filtering depth: Alerts can be filtered by FTFC alignment, signal type, specific timeframes, or Domino conditions — allowing traders to specify exactly which conditions warrant notification without building complex alert logic manually.
Performance optimization: Multi-timeframe analysis can be computationally expensive. This implementation consolidates data requests and limits historical depth on intensive calculations to maintain fast load times without sacrificing real-time functionality.
HOW TO USE IT
Setup
Enable the timeframes you want to monitor in settings. Enable or disable specific bar combinations you want to see (e.g., 2-1, 3-2, etc.). Configure your preferred hammer/shooter and Failed 2 detection methods. Toggle FTFC filtering on/off based on your strategy.
Reading the Display
Solid lines represent reference levels (prior high/low). Dashed lines represent actionable triggers. Color indicates direction (configurable) and status (hit, failed, active). Labels show timeframe, level type, and price. The data table shows current combo, bar type, and FTFC status per timeframe.
Alerts
Set your chart timeframe equal to or lower than your lowest configured indicator timeframe, and set the alert interval accordingly. Use alert filters to specify which conditions trigger notifications.
DEFINITIONS
Combo: Two or more numbers representing the relationship between consecutive candles (e.g., 2-1, 3-2, 2-1-2). Each number indicates the candle type in sequence.
Candle Types: 1 = Inside, 2 = Directional, 3 = Outside.
Directional Bias: u = price above open, d = price below open.
C1/C2: C1 is the most recent closed candle, C2 is two bars back.
Magnitude: The measured move target, typically the C2 high or low.
Exhaustion: Extended targets beyond magnitude, indicating potential reversal zones.
FTFC: Full Timeframe Continuity — all timeframes aligned in the same direction.
Domino: A setup where one signal triggering can cascade into triggering adjacent timeframe signals.
KNOWN LIMITATIONS
TradingView cannot request data from timeframes lower than your chart. Set chart timeframe accordingly.
Bar replay performance is unreliable with small timeframes and can produce runtime errors with certain low-timeframe combinations (TradingView limitation).
Exhaustion calculations are limited to recent bars for performance.
Label overlap at similar price levels is a TradingView rendering limitation.
Trading involves risk. This is a charting tool, not financial advice. Past performance does not guarantee future results.
Institutional Footprint ZonesThis script visualizes price-based footprint zones derived from repeated reactions, volume absorption behavior, and market structure alignment.
Its purpose is to help traders contextualize price movement , not to generate buy/sell signals.
Core concepts used
1. Demand–Supply Zones
Zones are identified from areas where price shows repeated reaction and imbalance resolution.
Zones are automatically invalidated once price decisively breaks beyond their defining structure.
2. Absorption Footprint Detection
The script highlights areas where price stalls despite participation, suggesting potential absorption rather than continuation.
This is based on candle structure and relative participation behavior, not order book data.
3. Market Structure Mapping
Trend context is derived from swing progression (higher highs / higher lows or lower highs / lower lows).
Structure is used only as a context filter , not as a timing signal.
4. Higher-Timeframe Fibonacci Confluence
Key Fibonacci levels from a selectable higher timeframe are projected onto the active chart to help identify areas of confluence with structure and zones.
Institutional Footprint ZonesThis script visualizes price-based footprint zones derived from repeated reactions, volume absorption behavior, and market structure alignment.
Its purpose is to help traders contextualize price movement , not to generate buy/sell signals.
Core concepts used
1. Demand–Supply Zones
Zones are identified from areas where price shows repeated reaction and imbalance resolution.
Zones are automatically invalidated once price decisively breaks beyond their defining structure.
2. Absorption Footprint Detection
The script highlights areas where price stalls despite participation, suggesting potential absorption rather than continuation.
This is based on candle structure and relative participation behavior, not order book data.
3. Market Structure Mapping
Trend context is derived from swing progression (higher highs / higher lows or lower highs / lower lows).
Structure is used only as a context filter , not as a timing signal.
4. Higher-Timeframe Fibonacci Confluence
Key Fibonacci levels from a selectable higher timeframe are projected onto the active chart to help identify areas of confluence with structure and zones.
DANI _ MTF Pullback StrategyMTF Pullback - RSI Panel Summary
Purpose: Companion indicator for the main strategy that displays RSI with divergence detection in a separate pane below the price chart.
Settings
ParameterDefaultDescriptionRSI Length14Lookback period for RSI calculationRSI Oversold Level30Threshold for oversold conditionRSI Overbought Level70Threshold for overbought conditionDivergence Lookback Bars10How many bars to look back for divergence detection
What It Displays
RSI Line — Changes color based on zone:
Purple = neutral (between 30-70)
Green = oversold (below 30)
Red = overbought (above 70)
Horizontal Levels:
Red dashed line at 70 (overbought)
Green dashed line at 30 (oversold)
Gray dotted line at 50 (midpoint)
Zone Fills:
Light red shading above 70
Light green shading below 30
Divergence Markers:
"DIV" label with lime circle = bullish divergence (price makes lower low, RSI makes higher low while oversold)
"DIV" label with fuchsia circle = bearish divergence (price makes higher high, RSI makes lower high while overbought)
Background Flash:
Green flash when bullish divergence detected
Red flash when bearish divergence detected
Divergence Logic
Bullish: Price makes a lower low AND RSI makes a higher low AND RSI is in oversold territory → potential reversal up
Bearish: Price makes a higher high AND RSI makes a lower high AND RSI is in overbought territory → potential reversal downand for the strategy15:36Outlined strategy script components and display mechanics.The user wants a summary of the main strategy script, similar to what I provided for the RSI panel. I should cover the purpose, settings, entry conditions, exit conditions, and what it displays on the chart.MTF Pullback Strategy Summary
Purpose: Multi-timeframe pullback strategy that trades trend continuations. Uses 4H timeframe for trend direction and entry timeframe (typically 15M) for precise entries based on RSI divergence and engulfing patterns.
Settings
ParameterDefaultDescriptionTimeframesHigher Timeframe240 (4H)Timeframe for trend detectionTrend FilterEMA Length50EMA period for trend directionRSIRSI Length14RSI calculation periodRSI Oversold Level30Long entry RSI thresholdRSI Overbought Level70Short entry RSI thresholdDivergence Lookback10Bars to scan for divergenceSwing DetectionSwing Lookback5Bars left/right to confirm swingRisk ManagementATR Length14ATR calculation periodStop Loss ATR Multiplier2.0SL = 2× ATR from entryTake Profit %2.0TP = entry ± 2%Trade DirectionTrade LongstrueEnable long tradesTrade ShortstrueEnable short trades
Entry Conditions
Long Entry (all must be true):
4H uptrend (price above 50 EMA + EMA rising)
Current price above 4H 50 EMA
Price pulling back from recent 4H swing high
RSI oversold (<30) or below 40
Bullish RSI divergence OR RSI turning up from oversold
Bullish engulfing candle at or within 2 bars after swing low
Short Entry (all must be true):
4H downtrend (price below 50 EMA + EMA falling)
Current price below 4H 50 EMA
Price pulling back from recent 4H swing low
RSI overbought (>70) or above 60
Bearish RSI divergence OR RSI turning down from overbought
Bearish engulfing candle at or within 2 bars after swing high
Exit Conditions
Exit TypeLongShortStop LossEntry - (2 × ATR)Entry + (2 × ATR)Take ProfitEntry × 1.02 (+2%)Entry × 0.98 (-2%)
What It Displays
On Chart:
Blue line = 4H 50 EMA
Green triangle below bar = long entry signal
Red triangle above bar = short entry signal
Green background tint = 4H uptrend active
Red background tint = 4H downtrend active
Info Table (top right):
FieldShows4H TrendUP ↑ / DOWN ↓ / NEUTRALPrice vs EMAABOVE / BELOWPullback LYES/NO (long pullback active)Pullback SYES/NO (short pullback active)Bull DivYES/NO (bullish divergence)Bear DivYES/NO (bearish divergence)
Strategy Logic Flow
4H TREND CHECK
↓
PRICE VS 50 EMA
↓
PULLBACK DETECTED?
↓
RSI CONDITION MET?
↓
RSI DIVERGENCE?
↓
ENGULFING AT SWING?
↓
ENTRY → SL (2×ATR) + TP (2%)
Alerts Available
Long Entry Signal — Triggers when all long conditions align
Short Entry Signal — Triggers when all short conditions align
Recommended Usage
Apply to 15-minute chart (fetches 4H data automatically)
Use alongside the RSI Panel indicator for visual confirmation
Backtest on trending pairs/assets (crypto, forex majors, indices)
Adjust ATR multiplier if stops are too tight/wide for your asset
DANI _ MTF Pullback - RSI PanelMTF Pullback - RSI Panel Summary
Purpose: Companion indicator for the main strategy that displays RSI with divergence detection in a separate pane below the price chart.
Settings
ParameterDefaultDescriptionRSI Length14Lookback period for RSI calculationRSI Oversold Level30Threshold for oversold conditionRSI Overbought Level70Threshold for overbought conditionDivergence Lookback Bars10How many bars to look back for divergence detection
What It Displays
RSI Line — Changes color based on zone:
Purple = neutral (between 30-70)
Green = oversold (below 30)
Red = overbought (above 70)
Horizontal Levels:
Red dashed line at 70 (overbought)
Green dashed line at 30 (oversold)
Gray dotted line at 50 (midpoint)
Zone Fills:
Light red shading above 70
Light green shading below 30
Divergence Markers:
"DIV" label with lime circle = bullish divergence (price makes lower low, RSI makes higher low while oversold)
"DIV" label with fuchsia circle = bearish divergence (price makes higher high, RSI makes lower high while overbought)
Background Flash:
Green flash when bullish divergence detected
Red flash when bearish divergence detected
Divergence Logic
Bullish: Price makes a lower low AND RSI makes a higher low AND RSI is in oversold territory → potential reversal up
Bearish: Price makes a higher high AND RSI makes a lower high AND RSI is in overbought territory → potential reversal down
