Começar

Timeframe

RSI/CCI/MFI/ADX/Stoch MTF DashBoardGauge Sentiment across timeframe for various indicators in single dashboard. RSI - to get the idea about relative price strength across all TFs. CCI /ADX- to get idea about power and strength in trend across all TFs. MFI- gives idea whether trend is supported by volume or not across all TFs. with this dashboard , you will get complete sentiment of market on your screen whether you use lower to upper TF or upper to lower TF approach. you can see market behavior and sentiment with these all in one dashboard across all TFs. Better use this with MA or vwap to get trend direction. Added feature to change location of dashboard on chart, now you can place it on top left, top right, bottom left, bottom right corner of chart as per your comfort. 2. Added ability to hide/show for all TFs. Now you can on/off , 5min, 15 min, 30 min, 60 min, 4 hour, daily ,weekly and monthly TF column if you do not use it. you can keep and work with TFs as per your comfort and liking. 3. Added feature to hide/show indicators, MFI, CCI, ADX. Now you can on/off indicator s MFI, CCI and ADX if you don't need them on dashboard as per your need. Made dashboard cell width and height auto adjusted, so that it values can be visible fully on TV app on mobile too. Hope it provides a better visual experience to read data on dashboard. 4. Added Stochastic as indicator to dashboard. STOCH is a range bound momentum oscillator. It is designed to display the location of the close compared to the high/low range over a user defined number of periods. You can use STOCH for Identifying overbought and oversold levels and also for identifying bull and bear set ups or signals across all TFs. Hope IT helps to take better trading decisions.
Indicador Pine Script™
por MTFTrader
27
Multi Timeframe Moving AveragesI made this script to keep an eye on most important timeframes (1h, 4h, D, W, M)) moving averages while watching another timeframe. You can select what Ma's you want to be shown for each timeframe and some options to help your analysis (show history, show prices on mouse over label, etc...) It includes 3 MA's: - Fast (EMA) - Middle (SMA) - Slow (SMA) You can configure length, source and color for each one. Also includes a daily VWAP and an option to show the previous day close. This script includes code from user Frien_dd-DisDev. I am very grateful to him Thank you for interest. Pablo.
Indicador Pine Script™
por Limonetti
ATR Report & Tool█ OVERVIEW This indicator reports the historical probabilities of the price trading past its Average True Range (ATR). █ CONCEPTS It is common knowledge that the market is not likely to trade past 1x ATR. Is this true? How much unlikely exactly? The indicator reports the data in a table and tells you precisely how often the price made it past x times ATR. You have identified two plausible entries at different price structures or two targets at significant projections; which one should you choose? While is it possible to reach them, is this indeed probable? The indicator complements your analysis for making sounds trading decisions. █ FEATURES Price Selection Tool The indicator has a price selection tool embedded. You can select a price on the chart and it will show the distance relative to the ATR so you can easily refer to the historical probability table. Multi-Timeframe By default, the indicator uses the daily timeframe​ for analyzing how much price moves compared to its average volatility​ during a day​. To the same extent, you can set it to any other timeframe. Configurable ATR • Pick your preferred smoothing between the Simple Moving Average​ (SMA​) or the Relative Moving Average (RMA). • Set the length for getting the average price movement. For example, you can set it to 20 for the daily ATR (20 trading days in a month), 12 for the weekly ATR (3 months), or 6 for the monthly ATR. • Select the reference between “previous” or “current” ATR value (default set on previous). Data Window The indicator provides additional volatility-related values and reporting data. Others Automatically hides the indicator when the chart’s timeframe is higher than the indicator’s one. █ NOTES Calculation The volatility⁣ is calculated from the selected period's low to high. It may use the previous close when the market gaps up/down.
Indicador Pine Script™
por sbtnc
7
Backtest HelperAre you tired of being able to see the future while you're backtesting? Have you ever clicked to a higher timeframe in bar replay, only to realize you've just seen everything that's going to happen before you've had a chance to test it? If you've had this problem, Backtest Helper is here for YOU. All you have to do is set a start date and time, then set your desired timeframe in minutes, then you're off to the races. For example, if you're a scalper that uses the 15 minute as their higher timeframe, set your start time at the 14th minute of the session you're testing and set your line spacing at 15 minutes. This will mark off every 14th minute on the charts. Now you know the exact moment you can go up to the 15 minute timeframe! On our 1 minute timeframe, this is how we'd look with the above settings. The Backtest Helper has marked off the 14th, 29th, 44th and 59th minute. When we go up to our 15 minute, there's no issues. We're seeing the candle we want to see and not the next 15 minute candle. You can use this for any timeframe. Just make sure you set your start time to at least 1 minute before the close of the candle and your line spacing to the higher timeframe (in minutes) you want to target.
Indicador Pine Script™
por kkudumu
Multi-Timeframe ATR Levels█ OVERVIEW This indicator plots the upside and downside ATR levels popularized by Trader Dante. █ CONCEPTS Beyond a level's boundary, a market is trading over its average volatility​. The indicator adds confirmation to "reversal" setups located at likely mean reversion. Oppositely, it highlights trades with an increased risk where the price is over-extended and when the market is possibly exhausted. Inside the levels’ boundaries, a market is trading within its average range​. The indicator adds confluence to your target selection. Indeed, a target set at or nearby a level is at reasonable reach for the selected period. In addition, it can improve your stop placement. Tucking your stop-loss outside the boundary of a level adds an extra assurance that your stop is beyond reach. █ FEATURES Multi-Timeframe By default, the indicator sets the timeframe​ to the daily for tracking how much price moves compared to its average volatility​ during a day​. To the same extent, you can set it to any other timeframe. For example, you can use the weekly or the monthly timeframe​​​ for adjusting your trading during the week or when approaching the end of the month. Configurable ATR • Pick your preferred smoothing between the Simple Moving Average​ (SMA​) or the Relative Moving Average (RMA). The SMA​ is used in the original MT4 indicator, and the RMA is the default in TradingView. • Set the length for getting the average price movement. For example, you can set it to 20 for the daily ATR (20 trading days in a month), 12 for the weekly ATR (3 months), or 6 for the monthly ATR. Also, you may set a shorter length when you want to emphasize the recent price volatility​. • Apply a custom multiplier on the ATR when you want to focus on a particular price movement. • Select the reference between “previous” or “current” ATR value (default set on previous). Customizable Labels • Personalize what info to show in the labels located on the right side of the levels. You can compose the data for showing the price, the ATR, both the price and the ATR or none. • On hovering a label, a smart tooltip displays the complementary data. The less info a label displays, the more its tooltip shows. • Choose how to display the values. In addition to the labels, the indicator can display the last values on the price scale, the status line, and the data window. Enhanced Coloring At a glance, see which level the price is approaching with the "Cold & Warm" coloring or quickly glimpse when the price has reached or exceeded the ATR with the "Overflow" coloring. Others • Automatically hides levels when the chart’s timeframe is higher than the indicator’s one. • Alerts setting. █ NOTES Calculation Upper band = low* + ATR Lower band = high* - ATR *The previous close is used when a gap up/down occurs. This is a PREMIUM indicator. I also have a free version of the Daily ATR Levels .
Indicador Pine Script™
por sbtnc
10
Multi-Timeframe (MTF) Dashboard by RiTzMulti-Timeframe Dashboard Shows values of different Indiactors on Multiple-Timeframes for the selected script/symbol VWAP : if LTP is trading above VWAP then Bullish else if LTP is trading below VWAP then Bearish. ST(21,1) : if LTP is trading above Supertrend (21,1) then Bullish , else if LTP is trading below Supertrend (21,1) then Bearish. ST(14,2) : if LTP is trading above Supertrend (14,2) then Bullish , else if LTP is trading below Supertrend (14,2) then Bearish. ST(10,3) : if LTP is trading above Supertrend (10,3) then Bullish , else if LTP is trading below Supertrend (10,3) then Bearish. RSI(14) : Shows value of RSI (14) for the current timeframe. ADX : if ADX is > 75 and DI+ > DI- then "Bullish ++". if ADX is < 75 but >50 and DI+ > DI- then "Bullish +". if ADX is < 50 but > 25 and DI+ > DI- then "Bullish". if ADX is above 75 and DI- > DI+ then "Bearish ++". if ADX is < 75 but > 50 and DI- > DI+ then "Bearish+". if ADX is < 50 but > 25 and DI- > DI+ then "Bearish". if ADX is < 25 then "Neutral". MACD : if MACD line is above Signal Line then "Bullish", else if MACD line is below Signal Line then "Bearish". PH-PL : "< PH > PL" means LTP is trading between Previous Timeframes High(PH) & Previous Timeframes Low(PL) which indicates Rangebound-ness. "> PH" means LTP is trading above Previous Timeframes High(PH) which indicates Bullish-ness. "< PL" means LTP is trading below Previous Timeframes Low(PL) which indicates Bearish-ness. Alligator : If Lips > Teeth > Jaw then Bullish. If Lips < Teeth < Jaw then Bearish. If Lips > Teeth and Teeth < Jaw then Neutral/Sleeping. If Lips < Teeth and Teeth > Jaw then Neutral/Sleeping. Settings : Style settings :- Dashboard Location: Location of the dashboard on the chart Dashboard Size: Size of the dashboard on the chart Bullish Cell Color: Select the color of cell whose value is showing Bullish-ness. Bearish Cell Color: Select the color of cell whose value is showing Bearish-ness. Neutral Cell Color: Select the color of cell whose value is showing Rangebound-ness. Cell Transparency: Select Transparency of cell. Column Settings :- You can select which Indicators values should be displayed/hidden. Timeframe Settings :- You can select which timeframes values should be displayed/hidden. Note :- I'm not a pro Developer/Coder , so if there are any mistakes or any suggestions for improvements in the code then do let me know! Note :- Use in Live market , might show wrong values for timeframes other than current timeframe in closed market!!
Indicador Pine Script™
por Keanu_ritz
20
MTF Custom Moving AveragesThis user-friendly indicator allows up to 8 moving averages ( EMA or SMA ) from any timeframe, on any time frame. There are plenty of other MTF MA indicators, each with their own pros and cons. I wanted to make one without the cons: - Independently set each MA to Exponential or Simple - No preset lengths - No preset timeframes - Optional labels to help keep track of the period/length/type of each plot - Clean, intuitive input layout - More than enough MAs available to use one indicator for several use cases... just check/uncheck the ones that are relevant to each chart Watch for death crosses on the 4hr while monitoring the "Bull Market Support band" (Weekly 21 EMA and 20 SMA ) and checking the Monthly 10 EMA for major support or resistance. Toggle between half of the available MAs for long term BTC trends and use the others for your alts. Use this one indicator to support multiple strategies. Please leave a comment if you find it useful or have suggestions! Inspired by the first MTF indicator I found: Weekly Moving Average by TommyTompsen.
Indicador Pine Script™
por notjoebidness
27
Multi-Timeframe 10XIMPORTANT NOTE: -> The timeframe for this indicator must be set at 1 minute; -> If the chart timeframe is higher than 1 minute, the results shown in the table for timeframes lower than the chart will not be correct; -> Tradingview's own documentation explains this as follows: " It is not recommended to request data of a timeframe lower that the current chart timeframe, for example 1 minute data from a 5 minutes chart. The main problem with such a case is that some part of a 1 minute data will be inevitably lost, as it’s impossible to display it on a 5 minutes chart and not to break the time axis. In such cases the behavior of security can be rather unexpected "; and -> It is therefore recommended that this indicator is placed in a standalone 1min chart window, and the window resized to only show the table to avoid any issues. Credits: -> J. Welles Wilder creating the Directional Movement System (DMS) (1978); and -> John Carter applying the DMS to create the popular Simpler Trading 10X Bars indicator. Introduction: Quickly see the quality and strength of a trend based on Directional Movement Index (DMI). The Average Directional Index (ADX), Minus Directional Indicator (-DI) and Plus Directional Indicator (+DI) represent a group of directional movement indicators that form a trading system developed by Welles Wilder. Although Wilder designed his Directional Movement System with commodities and daily prices in mind, these indicators can also be applied to stocks. Wilder determined directional movement by comparing the difference between two consecutive lows with the difference between their respective highs. +DI and -DI are derived from smoothed averages of these differences and measure trend direction over time. These two indicators are often collectively referred to as the DMI. ADX is in turn derived from the smoothed averages of the difference between +DI and -DI; it measures the strength of the trend (regardless of direction) over time. Trade Signals: -> Green indicates an uptrend i.e. when +DI is above -DI and ADX is greater than 20 - there is more upward pressure than downward pressure in the price; -> Red indicates a downtrend i.e. when -DI is above +DI and ADX is greater than 20 - there is more downward pressure on the price; and -> Yellow indicates no strong directional trend and potential for a reversal. Standalone Indicator: The 10X Bars version of the indicator can be found here:
Indicador Pine Script™
por Beardy_Fred
3
Multi-Timeframe TTM Squeeze Pro IMPORTANT NOTE: -> The timeframe for this indicator must be set at 1 minute; -> If the chart timeframe is higher than 1 minute, the results shown in the table for timeframes lower than the chart will not be correct; -> Tradingview's own documentation explains this as follows: " It is not recommended to request data of a timeframe lower that the current chart timeframe, for example 1 minute data from a 5 minutes chart. The main problem with such a case is that some part of a 1 minute data will be inevitably lost, as it’s impossible to display it on a 5 minutes chart and not to break the time axis. In such cases the behavior of security can be rather unexpected "; and -> It is therefore recommended that this indicator is placed in a standalone 1min chart window, and the window resized to only show the table to avoid any issues. Credits: -> John Carter creating the TTM Squeeze and TTM Squeeze Pro -> Lazybear's original interpretation of the TTM Squeeze: Squeeze Momentum Indicator -> Makit0's evolution of Lazybear's script to factor in the TTM Squeeze Pro upgrades - Squeeze PRO Arrows This is my version of their collective works, with amendments primarily to the Squeeze Conditions to more accurately reflect the color coding used by the official TMM Squeeze Pro indicator. TTM Squeeze Guide For those unfamiliar with the TTM Squeeze, it is simply a visual way of seeing how Bollinger Bands (standard deviations from a simple moving average ) relate to Keltner Channels ( average true range bands) compared with the momentum of the price action. The concept is that as Bollinger Bands compress within Keltner Channels , price volatility decreases, giving way for a potential explosive price movement up or down. Differences between the original TTM Squeeze and TTM Squeeze Pro: -> Both use a 2 standard deviation Bollinger Band ; -> The original squeeze only used a 1.5 ATR Keltner Channel; and -> The pro version uses 1.0, 1.5 and 2.0 ATR Keltner Channels . The pro version therefore helps differentiate between levels of squeeze (compression) as the Bollinger Bands moves through the Keltner Channels i.e. the greater the compression, the more potential for explosive moves - less compression means more squeezing. The Histogram shows price momentum whereas the colored dots (along the zeroline) show where the Bollinger Bands are in relation to the Keltner Channels: -> Cyan Bars = positive, increasing momentum; -> Blue Bars = positive, decreasing momentum (indication of a reversal in price direction); -> Red Bars = negative, increasing momentum; -> Yellow Bars = negative, decreasing momentum (indication of a reversal in price direction); -> Orange Dots = High Compression / large squeeze (One or both of the Bollinger Bands is inside the 1st (1.0 ATR) Keltner Channel); -> Red Dots = Medium Squeeze (One or both of the Bollinger Bands is inside the 2nd (1.5 ATR) Keltner Channel); -> Black Dots = Low compression / wide squeeze (One or both of the Bollinger Bands is inside the 3rd (2.0 ATR) Keltner Channels ); -> Green Dots = No Squeeze / Squeeze Fired (One or both of the Bollinger Bands is outside of the 3rd (2.0 ATR) Keltner Channel). Ideal Scenario: As the ticker enters the squeeze, black dots would warn of the beginning of a low compression squeeze. As the Bollinger bands continue to constrict within the Keltner Channels , red dots would highlight a medium compression. As the price action and momentum continues to compress an orange dot shows warning of high compression. As price action leaves the squeeze, the coloring would reverse e.g. orange to red to black to green. Any compression squeeze is considered fired at the first green dot that appears. Note: This is an ideal progression of the different types of squeezes, however any type of squeeze (and color sequence) may appear at anytime, therefore the focus is primarily on the green dots after any type of compression. Entry and Exit Guide: -> John Carter recommends entering a position after at least 5 black dots or wait for 1st green dot ; and -> Exit on second blue or yellow bar or, alternatively, remain in the position after confirming a continuing trend through a separate indicator. Standalone Indicator: The indicator (which can be used on any timeframe) can be found here:
Indicador Pine Script™
por Beardy_Fred
40
Percentage Levels by TimeframePlots the positive and negative percentage levels from a selection of timeframes and sources for any ticker. You can use this within a pullback trading system. For example, if you historically look at the average pullback of large cap stocks and ETF's, you can use this indicator to plot the levels it could pullback to for an entry to go long. It can be used as potential targets when trading a ticker short. Another use for this is to backtest the set percentage targets using TradingView's bar replay feature to see how ETF's and large cap stocks have reacted at these levels. Note: This is intended to be used at timeframes equal to higher than the chart's as it may cause re-painting issues. Currently percentage levels are statically set to 1, 3, 5, 10, 15, 20, 25, and 30% levels above and below the chosen source (open, high, low, close). You can also display the data based on timeframes from Daily (1D) all the way up to Yearly (12M) *Not financial advice but in my opinion the current percentage levels set (see above) are best used for ETF's and Large Cap Stocks. Jan 2 Release Notes: Added the ability to select the historical bars to look back when plotting levels Jan 2 Release Notes: To get a better display or proper resolution on your charts, change the view settings to "Scale Price Chart Only" Jan 2 Release Notes: To add % labels for this indicator on the price axis, change your chart settings to include "Indicator Name Label" & "Indicator Last Value". You can find this under the Label section after hitting the gear icon in the bottom right of your chart. Jan 2 Release Notes: Added: Custom Line Plot Extension Settings. Ideally both values should be equal to display optimal extended lines. To return to a base setting: '1' = Historical Lookback & '0' = Offset Lines. Also note this is dependent on the timeframe you are viewing on the chart. Jan 2 Release Notes: Removed indicator from example chart that was not needed. Jan 2 Release Notes: Updated some comments in the Pine Script Jan 2 Release Notes: Update: Added commentary and instructions in the indicator settings to address recommended line plot settings for Stocks/ETF's vs Futures Jan 2 Release Notes: Changed title from "Calculation Method" to "Calculation Source" Jan 4 2021 Normal use of security() dictates that it only be used at timeframes equal to or higher than the chart's as it may cause re-painting
Indicador Pine Script™
por thacoolbreeze
4
Chimpanzee V2.5 part A by joylay83Hi everyone, I am an amateur pinecoder. I would like to share my script which is coded with the intention of generating signals to send to 3commas webhook. It is still in development and revision. This collection of indicators use: Chart: 15m. Inverse Fisher Transformation of the RSI to detect dips in the 15m timeframe. Bollinger band (4H) to filter out false signals. Triple EMA 21: to mimic price action for easier coding alerts. Currently not involved in generating signals. will be incorporated in the future. StochRSI: As a visual filter. Currently not involved in generating signals. will be incorporated in the future. Background will be green if stochRSI is low and red if stockRSI is high. Candlesticks will be marked with a flag is TEMA breached BB. One would need to play around with timeframes, BB settings and IFTRSI threshold for different signals. There are 2 Signal Modes (with regards to IFTRSI): Threshold: When price action falls below BB and IFTRSI hits buy threshold, a buy/sell signal is generated. Eg if IFTRSI buy threshold is set to -0.9, the buy signal will remain continuously positive as long as IFTRSI is < 0.9. Cross: When price action falls below BB and IFTRSI hits threshold, nothing happens. It will wait until the IFTRSI cross back over the threshold before firing a signal. There is another identical set of indicators running on a higher time frame (IFTRSI: 4H, BB: D or 3D, TEMA 21 4H) but on the same chart. This tend to generate less signals but are more reliable. A usage example would be to send a larger buy order if the signal comes from this higher time frame, or execute a sell order after multiple buys from the lower time frame. It comes in 2 parts: Part A: Contains overlay display. This displays BB, Triple EMA, buy/sell and StochRSI in labels. the labels are self explanatory. Part B (please search for it): which is actually the same code but contain non-overlay display. You may also put part B overlay=true but scale to LEFT. The advantage of using overlay=true is that you can move the signal right over the candlesticks (mainly for troubleshooting/debugging). This part contains Inverse Fisher RSI, %B, Signal Line. %B is supposedly idential to Bollinger Bands in Part A. By default, when there is a buy/sell signal: lower time frame 15m: Signal Line in Part B will turn blue with a value 1 or -1 which corresponds to a buy or sell label in Part A higher time frame 4H: Signal Line in Part B will turn red with a value 2 or -2 which corresponds to a HTF buy or sell label in Part A Part A or B may be used to send signal to the webhook. You have to make sure that the settings of Part A and B are identical. You may choose to un-display some items to reduce clutter. Current problems: 1. Still too many buy signals Although many times it will generate excellent buy signal at many swing lows, but there are many buy signals prior to a major swing low. This can be observed in the picture above. It also generate a couple of buy signals prior to the swing lows. I am currently experimenting with 20m and hourly timeframe to address this issue. More filters are needed eg an oscillator or detecting candlestick patterns. 2. Premature sell signals. The sell signal is often generated at the beginning of a major bull run. My idea to solve this problem is to move to a higher timeframe and sell only when TEMA crossunder the upper bollinger band. 3. Lack of a backtester that can test multiple concurrent deals. Buy -> Buy (average down) -> Buy (average down) -> Buy (average down) -> Sell 4. Lack of the ability to calculate average purchase price Probably have to code it as a strategy 5. Display lag As the browser is running 2 copies of the idential script, it tends to lag when you drag your chart around. So far there are no timeouts or delay in firing alerts to 3commas. I do welcome any suggestion for improvement and constructive criticism. tqvm. Credits : Thank you for doing an awesome job. I learnt a lot from your codes and tutorials. Credits not listed in any order. If your code is used here and did not receive due credit, kindly drop me a note. tq. Blessing 3 by JTA Today @ZenAndTheArtOfTrading (extremely-easy-to-understand tutorials eg fixing repainting) @LazyBear (various codes) @Galactus-B Argo I @TheTradingParrot (Inverse Fisher RSI and Gavin's backtester) @zendog123 (backtester and various codes) @ydeniz2000 (Bollinger Bands) TradingView built-in scripts
Indicador Pine Script™
por joylay83
4
Volume-based Support & Resistance ZonesThe new and improved Support & Resistance Zones indicator is here. This indicator is based on high volume at fractal lows or fractal highs with the zones based on the size of the wick for that timeframe’s candle. This helps traders visualize which price levels are of the most significance for either reversals or continuation of the trend when zones are broken and then re-tested. Original script is thanks to synapticex and additional modifications is thanks to Lij_MC. Credit to both of them for most of the logic behind this script. Since then I have made many changes to this script as noted below: Changed default S/R lines from plots to lines, and gave option to user to change between solid line, dashed line, or dotted line for both S/R lines. Added additional time frame and gave more TF options for TF1 other than current TF. Now you will have 4 time frames to plot S/R zones from. Gave user option to easily change line thickness for all S/R lines. Made it easier to change colors of S/R lines and zones by consolidating the options under settings (rather than under style). Added extensions to active SR Zones to extend all the way right. Added option to extend or not extend the previous S/R zones up to next S/R zone. Added optional time frame labels to active S/R zones, with left and right options as well as option to adjust how far to the right label is set. Fixed issue where the higher time frame S/R zone was not properly starting from the high/low of fractal. Now any higher time frame S/R will begin exactly at the High/Low points. Note that this may not work perfectly on stocks and if a fractal high/low is too many bars in the past, it will revert to a default max bars back to avoid script errors. Added to script a function that will prevent S/R zones from lower time frames displaying while on a higher time frame. This helps clean up the chart quite a bit. Created arrays for each time frame's boxes and lines so that the number of S/R zones can be controlled for each time frame and limit memory consumption. New alert options added and customized alert messages. - The way this indicator works is it looks for fractal highs or fractal lows with volume that pierces above the volume's Moving Average. This moving average value can be modified in the settings for each time frame. - The fractal highs will be confirmed with 3 successive higher highs followed by 2 successive lower highs and vice versa for the fractal lows. - The zone is created from the fractal high/low and the close of the candle for whatever time frame you selected. The bigger the zone, the more significant that zone is. - You can disable any zone, change the zones to show lines only, and modify all the colors, transparencies, and thickness of lines for all the zones. - To create alerts, you first want to enable the types of alerts you want for each time frame in the indicator's settings. Then after you apply changes, right click on one of the zones on the chart, and click "Add Alert on Vol S/R Zones". You do not need to add a title as the correct alert messages are already built-in. - More changes will be coming in the future! I hope you find this indicator useful, if so please give it a thumbs up! If you have any suggestions or features you would like to see, just let me know in the comment section. Thanks and enjoy!
Indicador Pine Script™
por tommyf1001
454
Multi-timeframe Stochastic RSIThe multi-timeframe stochastic RSI utilizes stochastic RSI signals from 11 different time-frames to indicate whether overbought/oversold signals are in agreement or not across time-frames. Ideally traders should enter and exit when conditions are in agreement as indicated by the intensity of the long (green) or short (red) bands at the top and bottom of the indicator. The intensity of the bands indicates how many of the time-frames are currently overbought/oversold.
Indicador Pine Script™
por Snufkin420TC
5
EMA Levels, Multi-TimeframeThe exponential moving average (EMA) tracks price over time, giving more importance to recent price data than simple moving average (SMA). EMAs for larger timeframes are generally considered to be stronger supports/resistances for price to move through than smaller timeframes. This indicator allows you to specify two different EMA lengths that you want to track. Additionally, this indicator allows you to display not just the EMA levels of your currently viewed timeframe on the chart, but also shows the EMA levels of up to 4 different timeframes on the same chart. This allows you to quickly see if multiple EMA levels are aligning across different timeframes, which is an even stronger indication that price is going to meet support or resistance when it meets those levels on the chart. There are a lot of nice configuration options, like: Ability to customize the EMA lengths you want to track Style customization (color, thickness, size) Hide any timeframes/levels you aren't interested in Labels on the chart so you can tell which plots are the EMA levels Optionally display the plot as a horizontal line if all you care about is the EMA level right now
Indicador Pine Script™
por jmosullivan
6
RSI Levels, Multi-TimeframeThe relative strength index (RSI) is a momentum indicator that measures the magnitude of recent price changes to evaluate overbought or oversold conditions. RSI is normally displayed as an oscillator separately from price and can have a reading from 0 to 100. This indicator takes the RSI and plots the 30 & 70 levels onto the price chart so you can see when price is going to meet the 30 or 70 levels. The reason the 30 & 70 levels are important is because many traders (and bots) use those as signals to buy (at 30 RSI) or sell (at 70 RSI). Additionally, this indicator allows you to display not just the RSI levels of your currently viewed timeframe on the chart, but also shows the RSI levels of up to 6 different timeframes on the same chart. This allows you to quickly see if multiple RSI levels are aligning across different timelines, which is an even stronger indication that price is going to change direction when it meets those levels on the chart. There are a lot of nice configuration options, like: Style customization (color, thickness, size) Labels on the chart so you can tell which plots are the RSI levels Optionally display the plot as a horizontal line if all you care about is the RSI level right now Toggle overbought (RSI 70) or oversold (RSI 30) on/off completely
Indicador Pine Script™
por jmosullivan
3
ConverterTFLibrary "ConverterTF" I have found a bug Regarding the timeframe display, on the chart I have found that the display is numeric, for example 4Hr timeframe instead of '4H', but it turns out to be '240', which I want it to be displayed in abbreviated form. And in all other timeframes it's the same. So this library was created to solve those problems. It converts a timeframe from a numeric string type to an integer type by selecting a timeframe manually and displaying it on the chart. CTF() str = "240" X.GetTF( str ) Example str = input.timeframe(title='Time frame', defval='240') TimeF = CTF(str) L=label.new(bar_index, high, 'Before>> Timeframe '+str+' After>> Timeframe '+TimeF,style=label.style_label_down,size=size.large) label.delete(L ) Custom timeframes can handle this issue as well. An example from the use. You will find it on the bottom right hand side. Hopefully it will be helpful to the Tradingview community. :)
Biblioteca Pine Script™
por hapharmonic
Last Available Bar InfoLibrary "Last_Available_Bar_Info" getLastBarTimeStamp() getAvailableBars() This simple library is built with an aim of getting the last available bar information for the chart. This returns a constant value that doesn't change on bar change. For backtesting with accurate results on non standard charts, it will be helpful. (Especially if you are using non standard charts like Renko Chart). Methods getLastBarTimeStamp() : Returns Timestamp of the last available bar (Constant) getAvailableBars() :Returns Number of Available Bars on the chart (Constant) Example import paragjyoti2012/Last_Available_Bar_Info/v1 as LastBarInfo last_bar_timestamp=LastBarInfo.getLastBarTimeStamp() no_of_bars=LastBarInfo.getAvailableBars() If you are using Renko Charts, for backtesting, it's necesary to filter out the historical bars that are not of this timeframe. In Renko charts, once the available bars of the current timeframe (based on your Tradingview active plan) are exhausted, previous bars are filled in with historical bars of higher timeframe. Which is detrimental for backtesting, and it leads to unrealistic results. To get the actual number of bars available of that timeframe, you should use this security function to get the timestamp for the last (real) bar available. tf=timeframe.period real_available_bars = request.security(syminfo.ticker, tf , LastBarInfo.getAvailableBars() , lookahead = barmerge.lookahead_off) last_available_bar_timestamp = request.security(syminfo.ticker, tf , LastBarInfo.getLastBarTimeStamp() , lookahead = barmerge.lookahead_off)
Biblioteca Pine Script™
por CyberMensch
Shade a particular timeframe x3This is to help you shade 3 different time frames, its showing 3 different timeframes. This will help you determine if you are trading in the right time frame that you want to. It is set to default to Eastern time frame. the default setting are set for 1700-0100, 0100-0600 and 0600-1000. You can change the time frames to which ever you would like to trade. This helps the visual learners to recognize which time frame they are trading in.
Indicador Pine Script™
por Cpattersontrading
RM Timeframe ContinuityThis indicator plots a table off to the right of the chart to help with determining timeframe continuity. Per the Strat, a great edge is only taking trades where full timeframe continuity is in place (i.e. if you are going long, make sure other timeframes are also green). In this script: Green candles have green colored boxes, red candles have red colored boxes. Inside bars are represented by a circle - ⬤ Outside bars are represented by a tall rectangle - ▮ 2-up bars are indicated by an up arrow - ▲ 2-down bars are indicated by a down arrow - ▼ User defined options: Pick any timeframe for the 4 boxes Choose whether to plot the highs/lows of the larger timeframe candles as horizontal rays on your chart (along with the associated colors)
Indicador Pine Script™
por millerrh
13