Começar

Padrões gráficos

Thuận-Pro Full OptionThe Ultimate Price Action & Momentum System 1. OVERVIEW Thuận-Pro Final is an all-in-one trading system designed for precision and safety. It combines Market Structure, Supply/Demand Zones, and Momentum Confluence to identify high-probability trade setups. 2. VISUAL FEATURES Green Boxes (Support Zones): Strong buying areas. Red Boxes (Resistance Zones): Strong selling areas. "BUY" / "SELL" Labels: Instant signals generated when price tests a zone and confirms a rejection. Purple Lines (Fibonacci Targets): Auto-generated profit targets (1.272, 1.618, 2.618) when price breaks the All-Time High (Blue Sky mode). Bottom Pane: RSI + MACD: Color-coded trend strength. Volume + Yellow Line: Real-time volume analysis 3. HOW TO TRADE (STRATEGY) 🟢 BUY SIGNAL (Long Setup) Zone: Price drops into a Green Box (Support). Reaction: Price touches the zone but CLOSES inside or above the box bottom (Valid Rejection/Spring). Confirmation: A green "BUY" label appears below the candle. Momentum (Optional): RSI is Oversold (≤ 35) and Volume bar is above the Yellow Line. 🔴 SELL SIGNAL (Short Setup) Zone: Price rallies into a Red Box (Resistance). Reaction: Price touches the zone but CLOSES inside or below the box top (Valid Rejection/Upthrust). Confirmation: A red "SELL" label appears above the candle. Momentum (Optional): RSI is Overbought (≥ 65) and Volume bar is above the Yellow Line. 4. SMART ALERTS Set up alerts in TradingView to never miss a move: Touch Support: Triggered when price tests a Green Zone. Touch Resistance: Triggered when price tests a Red Zone. Break High: Trend Reversal (Bearish ➔ Bullish). Break Low: Trend Reversal (Bullish ➔ Bearish). 5. PRO TIPS Safe Entry: The indicator filters out "Knife Catching." If a candle closes outside the box (breaking the zone), the signal will NOT appear. Profit Taking: Use the Purple Fibonacci Lines (1.618) as your primary target when the market breaks new highs. Stop Loss: Place SL slightly below the Green Box (for Buy) or above the Red Box (for Sell). Developed by: Nguyen Duc Thuan
Indicador Pine Script®
por yen_fx_vn
RT-Liquidation Engine-DeltaIntroduction The RT-Liquidation Engine-Levels is a liquidity mapping tool designed to highlight where leveraged long and short positions may be vulnerable to liquidation. It plots projected Liquidation Levels above and below price, grouped by leverage tiers, so traders can see where the algorithm estimates clustered liquidation zones might sit relative to current price. The RT-Liquidation Engine-Levels indicator is intended to be used in conjunction with the RT-Liquidation Engine-Delta indicator. This writeup will cover both indicators in depth and explain how they work together. Liquidity Theory – What This Tool Is Looking At Liquidity levels are a data point that advanced traders study to understand the price levels where positions may be forced out of the market. While exchanges can show open orders in an order book, they do not publish where traders will be liquidated. However, market participants who can estimate those zones often pay close attention to them, because a single wick can be enough to trigger liquidations and force positions to close into the market. The RT-Liquidation Engine is built around this concept. It uses on-chart information and volume to approximate where these potential liquidation areas may be and displays them directly on the price chart so traders can see the projected levels they may want to monitor. How It Works Because real Liquidation Levels are not published by exchanges, the indicator cannot read them directly. Instead, it uses an internal algorithm that studies current prices, direction, and volume to estimate where common leveraged positions might be at risk. Conceptually, the algorithm: Uses the visible data on the chart to approximate where typical leveraged long and short positions may be clustered. Projects those estimates as horizontal levels above and below current price. Keeps those projected levels on the chart until price action trades into them and the level is considered “touched.” The result is a set of dynamic levels that act as an estimated map of where liquidation events might be more likely, based on the chart’s own history and current structure. Trader Math And Leverage Levels Traders using perpetual futures often use different leverage levels for their positions. The higher the leverage, the more vulnerable those positions are to being liquidated by relatively small moves in price. While the exact leverage of individual traders is unknown, the Liquidation Engine focuses on four commonly referenced leverage tiers: 5x Leverage 10x Leverage 25x Leverage 50x Leverage Each tier can be displayed as its own set of projected Liquidation Levels on the chart so traders can see a structured view of where different leverage groups may be sensitive. The Liquidation Levels can be displayed with Multi Color options or in Red/Green depending on the trader's preference. The above chart shows the Liquidation Levels being displayed with Multi Colors. The above chart shows the Liquidation Levels being displayed in Red/Green. Reading The Levels Above and below the candles you will see projected Liquidation Levels. These levels appear at the prices where the algorithm estimates that leveraged positions for each tier could be vulnerable, and they remain drawn until price has traded through them. In the default view: Thickness of the level – Indicates the estimated size of the position. Thicker lines represent larger projected positions. Color of the level – Indicates which leverage group the level belongs to (5x, 10x, 25x, or 50x). Length of the level – Indicates how long the estimated leveraged position has been open according to the algorithm. This combination provides a visual profile of which zones have more concentrated projected liquidation interest and which have been standing in the market for longer. Tuning Options The Liquidation Engine includes a focused set of tuning options so traders can adjust how much information is plotted and how it appears on their charts. Custom Tuning Options Include: Sensitivity Filter – Adjusts the overall threshold the algorithm uses when estimating positions. Increasing this value reduces the number of plotted levels and focuses on larger estimated positions. Decreasing it allows smaller estimated positions to be considered, increasing the number of displayed levels. Leverage Level Toggles – Individual toggles for each leverage group (5x, 10x, 25x, 50x). These allow traders to show or hide specific tiers depending on which groups they want to monitor. Color Settings – Controls the colors and transparency of the levels. Traders can adjust these settings to match their chart theme and highlight or soften specific leverage groups. Summary Table Options – Controls the on-chart table that tracks the estimated number of Long versus Short positions. Table On/Off – Toggles the table on or off. Table Position – Moves the table to different corners of the chart. Table Background Color / Table Text Color – Customizes the table’s appearance. Liquidation Engine – Delta In addition to plotting projected Liquidation Levels, the RT-Liquidation Engine-Levels Indicator is to be used in conjunction with the RT-Liquidation Engine-Delta Indicator. This tool displays the Liquidation Delta data that the algorithm estimates on the imbalance between long and short exposure. Conceptually, the RT-Liquidation Engine-Delta Indicator computes the following items: Aggregates the estimated long and short positions from the projected Liquidation Levels. Calculates a net difference (delta) between those two estimates. Displays that difference so traders can see when the projected open interest appears skewed to one side. When the estimated order book is heavily skewed in one direction, the market may sometimes move in the opposite direction as conditions rebalance. The delta view is designed to provide context for those potential rebalancing moves, not to predict exact turning points. Tuning options for the RT-Liquidation Engine-Delta Indicator are aligned with the RT-Liquidation Engine-Levels Indicator settings. If you change filters, toggles, or colors in the Levels tool, it is recommended to mirror those settings in the Delta tool so both views remain synchronized. Best Practices Some common usage patterns include: Timeframes – Many traders prefer to use Liquidation Engine on intraday timeframes under 60 minutes. Timeframes such as 30-minute candles or smaller are often used when monitoring leveraged flows. Load Times – The algorithm performs a significant amount of calculations to project these Liquidation Levels and Deltas. On some symbols and timeframes, this can take noticeable time to load the chart. When changing settings, keep an eye on the loading indicator in the chart header to confirm calculations are still running. In normal conditions, these calculations are completed in less than 30 seconds. Market Sessions And Levels Out Of Range – If projected levels appear far from current price or do not align with visible action, check the chart’s session settings in the bottom-left of the chart (for example, ETH vs RTH sessions). Ensuring the correct session is active can help keep the displayed levels in a more relevant range. These guidelines are intended to make the tool easier to work with and to keep expectations realistic when interpreting the projections. What Makes This Tool Different While many indicators focus on price alone, the Liquidation Engine Levels and Delta tools are designed specifically around estimated liquidation behavior: It concentrates on where leveraged positions may be at risk, rather than only where price has been in the past. It segments projected levels by leverage tier so traders can distinguish between different risk profiles on the chart. It includes both a level-mapping view and a delta view, providing context for both where levels sit and how imbalanced the estimated positioning might be. Important Note The RT-Liquidation Engine-Levels and RT-Liquidation Engine-Delta tools provide an approximation of where leveraged positions might be vulnerable based solely on chart data. They do not access actual exchange liquidation feeds, does not reveal real trader positions, and cannot guarantee that a projected level will cause price to react. This indicator is intended to provide additional context around potential liquidation zones and positioning imbalances. It is not a standalone signal generator and should always be used together with your own analysis, testing, and risk management. Historical interactions with projected Liquidation Levels, including any illustrative examples, do not guarantee future results. 🐋 Tight lines and happy trading!
Indicador Pine Script®
por RainbowRunner144
RT-Liquidation Engine-LevelsIntroduction The RT-Liquidation Engine-Levels is a liquidity mapping tool designed to highlight where leveraged long and short positions may be vulnerable to liquidation. It plots projected Liquidation Levels above and below price, grouped by leverage tiers, so traders can see where the algorithm estimates clustered liquidation zones might sit relative to current price. The RT-Liquidation Engine-Levels indicator is intended to be used in conjunction with the RT-Liquidation Engine-Delta indicator. This writeup will cover both indicators in depth and explain how they work together. Liquidity Theory – What This Tool Is Looking At Liquidity levels are a data point that advanced traders study to understand the price levels where positions may be forced out of the market. While exchanges can show open orders in an order book, they do not publish where traders will be liquidated. However, market participants who can estimate those zones often pay close attention to them, because a single wick can be enough to trigger liquidations and force positions to close into the market. The RT-Liquidation Engine is built around this concept. It uses on-chart information and volume to approximate where these potential liquidation areas may be and displays them directly on the price chart so traders can see the projected levels they may want to monitor. How It Works Because real Liquidation Levels are not published by exchanges, the indicator cannot read them directly. Instead, it uses an internal algorithm that studies current prices, direction, and volume to estimate where common leveraged positions might be at risk. Conceptually, the algorithm: Uses the visible data on the chart to approximate where typical leveraged long and short positions may be clustered. Projects those estimates as horizontal levels above and below current price. Keeps those projected levels on the chart until price action trades into them and the level is considered “touched.” The result is a set of dynamic levels that act as an estimated map of where liquidation events might be more likely, based on the chart’s own history and current structure. Trader Math And Leverage Levels Traders using perpetual futures often use different leverage levels for their positions. The higher the leverage, the more vulnerable those positions are to being liquidated by relatively small moves in price. While the exact leverage of individual traders is unknown, the Liquidation Engine focuses on four commonly referenced leverage tiers: 5x Leverage 10x Leverage 25x Leverage 50x Leverage Each tier can be displayed as its own set of projected Liquidation Levels on the chart so traders can see a structured view of where different leverage groups may be sensitive. The Liquidation Levels can be displayed with Multi Color options or in Red/Green depending on the trader's preference. The above chart shows the Liquidation Levels being displayed with Multi Colors. The above chart shows the Liquidation Levels being displayed in Red/Green. Reading The Levels Above and below the candles you will see projected Liquidation Levels. These levels appear at the prices where the algorithm estimates that leveraged positions for each tier could be vulnerable, and they remain drawn until price has traded through them. In the default view: Thickness of the level – Indicates the estimated size of the position. Thicker lines represent larger projected positions. Color of the level – Indicates which leverage group the level belongs to (5x, 10x, 25x, or 50x). Length of the level – Indicates how long the estimated leveraged position has been open according to the algorithm. This combination provides a visual profile of which zones have more concentrated projected liquidation interest and which have been standing in the market for longer. Tuning Options The Liquidation Engine includes a focused set of tuning options so traders can adjust how much information is plotted and how it appears on their charts. Custom Tuning Options Include: Sensitivity Filter – Adjusts the overall threshold the algorithm uses when estimating positions. Increasing this value reduces the number of plotted levels and focuses on larger estimated positions. Decreasing it allows smaller estimated positions to be considered, increasing the number of displayed levels. Leverage Level Toggles – Individual toggles for each leverage group (5x, 10x, 25x, 50x). These allow traders to show or hide specific tiers depending on which groups they want to monitor. Color Settings – Controls the colors and transparency of the levels. Traders can adjust these settings to match their chart theme and highlight or soften specific leverage groups. Summary Table Options – Controls the on-chart table that tracks the estimated number of Long versus Short positions. Table On/Off – Toggles the table on or off. Table Position – Moves the table to different corners of the chart. Table Background Color / Table Text Color – Customizes the table’s appearance. Liquidation Engine – Delta In addition to plotting projected Liquidation Levels, the RT-Liquidation Engine-Levels Indicator is to be used in conjunction with the RT-Liquidation Engine-Delta Indicator. This tool displays the Liquidation Delta data that the algorithm estimates on the imbalance between long and short exposure. Conceptually, the RT-Liquidation Engine-Delta Indicator computes the following items: Aggregates the estimated long and short positions from the projected Liquidation Levels. Calculates a net difference (delta) between those two estimates. Displays that difference so traders can see when the projected open interest appears skewed to one side. When the estimated order book is heavily skewed in one direction, the market may sometimes move in the opposite direction as conditions rebalance. The delta view is designed to provide context for those potential rebalancing moves, not to predict exact turning points. Tuning options for the RT-Liquidation Engine-Delta Indicator are aligned with the RT-Liquidation Engine-Levels Indicator settings. If you change filters, toggles, or colors in the Levels tool, it is recommended to mirror those settings in the Delta tool so both views remain synchronized. Best Practices Some common usage patterns include: Timeframes – Many traders prefer to use Liquidation Engine on intraday timeframes under 60 minutes. Timeframes such as 30-minute candles or smaller are often used when monitoring leveraged flows. Load Times – The algorithm performs a significant amount of calculations to project these Liquidation Levels and Deltas. On some symbols and timeframes, this can take noticeable time to load the chart. When changing settings, keep an eye on the loading indicator in the chart header to confirm calculations are still running. In normal conditions, these calculations are completed in less than 30 seconds. Market Sessions And Levels Out Of Range – If projected levels appear far from current price or do not align with visible action, check the chart’s session settings in the bottom-left of the chart (for example, ETH vs RTH sessions). Ensuring the correct session is active can help keep the displayed levels in a more relevant range. These guidelines are intended to make the tool easier to work with and to keep expectations realistic when interpreting the projections. What Makes This Tool Different While many indicators focus on price alone, the Liquidation Engine Levels and Delta tools are designed specifically around estimated liquidation behavior: It concentrates on where leveraged positions may be at risk, rather than only where price has been in the past. It segments projected levels by leverage tier so traders can distinguish between different risk profiles on the chart. It includes both a level-mapping view and a delta view, providing context for both where levels sit and how imbalanced the estimated positioning might be. Important Note The RT-Liquidation Engine-Levels and RT-Liquidation Engine-Delta tools provide an approximation of where leveraged positions might be vulnerable based solely on chart data. They do not access actual exchange liquidation feeds, does not reveal real trader positions, and cannot guarantee that a projected level will cause price to react. This indicator is intended to provide additional context around potential liquidation zones and positioning imbalances. It is not a standalone signal generator and should always be used together with your own analysis, testing, and risk management. Historical interactions with projected Liquidation Levels, including any illustrative examples, do not guarantee future results. 🐋 Tight lines and happy trading!
Indicador Pine Script®
por RainbowRunner144
2-Close + Bar 5 Reversal (Scan Ready)Bulkowski's Bullish 2-Step Reversal Bar 1 Any price bar. Bar 2 Price makes a low below bar 1 with a lower close, too. Bar 3 Price has a low below bar 2 but a close above bar 1 (which will also be above bar 2's close). Bars 1 to 3 form a 2-close reversal pattern. Bar 4 Makes a close below bar 3's close. Bar 5 Has a low below bar 4 but closes above bars 3 and 4. Breakout Breaks out upward 79% of the time in stocks. From his page: thepatternsite.com
Indicador Pine Script®
por toppermost
Human3Human 3.0 Left-Side Bottom Reversal Indicator 人间财风 3.0 左侧止跌指标 **Green Arrow** → Bottom Reversal Signal (main signal, focus on this one) 「绿止跌，多看绿箭头」 **Red Arrow** → Top Exhaustion Signal (secondary, can be ignored or disabled in settings) 「红滞涨，少用红箭头」 **Best used on:** 「宜用图表」 - BTC 8H - VIX 8H - Nasdaq Index Daily (1D) **Not recommended for:** 「不宜图表」 - Gold - A-shares (Chinese stocks) **For trial :** 「使用联系」 Find me on X (Twitter): @kimvp9
Indicador Pine Script®
por kimvp
熊熊测试123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf123nifwiofjewiofjoiewjfjeiwojfrwiopjf
Indicador Pine Script®
por LittleDirectorBear
1
Morning ORB FVG Trigger✅ Overview Morning ORB FVG Trigger is a complete intraday trading framework built around: A Morning Opening Range Breakout (ORB) The first Fair Value Gap (FVG) after that breakout Strict risk management and position sizing Optional HTF trend filter (Daily / Weekly / Monthly) Optional Daily ATR filter to avoid extreme days The script is designed for futures / indices / FX on intraday charts up to 15 minutes and for traders who want a clean, mechanical entry framework with clear risk. 🧠 Core idea Define a morning opening range (e.g. 09:30–09:45). Wait for a clean breakout above/below that range. After the breakout, wait for the first FVG in breakout direction, confirmed by the next candle (no immediate full reclaim). Use a chosen stop logic + R:R factor to build risk/reward boxes. Calculate position size based on your account risk. (Optional) Only take trades: In the direction of the HTF EMA trend (D/W/M). On days where the morning range is within a band of the Daily ATR. You can also disable all signals/boxes and use the script just as a visual ORB tool. ⏰ 1. ORB / Morning Range Inputs (Main section) Morning Range Session Time window of the opening range in exchange time Example: 09:30–09:45 for a 15-minute ORB. You can type custom ranges (e.g. 09:30–09:35 for a 5-minute ORB). Risk/Reward (TP factor) Multiplier for the take-profit distance relative to the stop. 2.0 = TP is 2× the stop distance 1.5 = TP is 1.5× the stop distance Show ORB range If enabled, draws: ORB high/low lines ORB labels (e.g. 15min ORB high / low) Optional midline Extend ORB lines to the right (bars) How many bars to extend the ORB high/low horizontally beyond the ORB itself. Trade box width (bars) Horizontal width (in bars) of: Red risk box (entry–stop) Green reward box (entry–TP) Implementation details The ORB is always calculated on 1-minute data internally, so it stays precise even on 5m/15m charts. The script only works on intraday timeframes up to 15 minutes. 📦 2. FVG Block Group: “FVG” Threshold % Minimum size of an FVG in % of price. 0 = every FVG Higher values = only larger gaps Auto threshold (from volatility) If enabled, the minimum FVG size is derived from historical volatility instead of a fixed percentage. Allow breakout FVG partly inside ORB Off (default): the FVG must lie fully outside the ORB. On: the breakout FVG itself may still overlap the ORB a bit, as long as it is the first one attached to the breakout move. Enable FVG entry signals, boxes & alerts On: full system – FVG detection, entry labels, risk/TP boxes, alerts. Off: no entries, no risk/TP boxes, no alerts. You only get the ORB and (optionally) the HTF dashboard, so you can trade your own setups. Entry mode Entry mode (Mid / Edge / NextOpen) Mid – Entry at the midpoint of the FVG. Edge – Long at the upper FVG edge, short at the lower FVG edge. NextOpen – No limit order in the gap. Entry is placed at the next bar open after FVG confirmation. Edge offset (ticks) Additional offset for Edge entries: Long: +ticks = a bit above the FVG (more conservative) -ticks = deeper into the FVG (more aggressive) Short: +ticks = a bit below the FVG -ticks = deeper into the FVG FVG detection logic Uses a LuxAlgo-style 3-candle FVG pattern (gap between candle 1 and 3). Only one FVG is taken: the first valid FVG after the ORB breakout in breakup direction. The FVG candle is the middle bar; the script: Detects the FVG on the previous bar. Waits for the current bar to confirm it: Bullish: current low must stay above the lower FVG boundary Bearish: current high must stay below the upper FVG boundary Only then an entry signal is generated. 🛑 3. Stop Logic Group: “Stop Logic” Stop mode (PrevBar / Pivot / FVG Candle) PrevBar – Stop at the low/high of the candle before the FVG (tight/aggressive). FVG Candle – Stop at the low/high of the FVG candle itself (medium). Pivot – Stop at the most recent swing high/low using pivotLeft / pivotRight pivots (more conservative). Ticks (stop buffer) Offset (in ticks) from the selected stop level. > 0 = further away (more room, more risk) < 0 = closer (tighter stop) Pivot left / Pivot right Number of candles left/right to define a swing high/low when using Pivot stop mode. Typical intraday values: 2–3. The script also sanity-checks the stop: if the calculated stop would be invalid (e.g. above entry in a long), it moves it by a minimal distance (2 ticks) to keep a valid risk. 📈 4. HTF Trend Filter (Daily / Weekly / Monthly) Group: “HTF Trend Filter” Enable HTF trend filter If enabled, trades are only allowed: Long when at least 2 of D/W/M closes are above their EMA Short when at least 2 of D/W/M closes are below their EMA EMA length (D/W/M) EMA length for all three higher timeframes (Daily, Weekly, Monthly). This helps focus entries in the direction of the dominant higher-timeframe trend. 📊 5. ATR Filter (Daily) Group: “ATR Filter (Daily)” Use daily ATR filter If enabled, the height of the ORB (ORB high – ORB low) must be within a band of the Daily ATR to allow any signals. Daily ATR length ATR period on the Daily timeframe. Min ORB size vs ATR Lower bound: Example: 0.3 → ORB must be at least 0.3 × Daily ATR 0.0 = no minimum. Max ORB size vs ATR Upper bound: Example: 1.5 → ORB must be ≤ 1.5 × Daily ATR 0.0 = no maximum. If the ORB is too small (choppy) or too large (exhausted move), no breakout or FVG signal will be generated on that day. 🧭 6. HTF Dashboard & Signal Labels Group: “HTF Trend Dashboard” Show HTF dashboard Draws a small label at the top of the chart showing: HTF Trend (EMA X) D: UP/FLAT/DOWN W: UP/FLAT/DOWN M: UP/FLAT/DOWN Dashboard position Top Right, Top Center, Top Left – places the dashboard at the top. Over Risk Info – no top dashboard; instead, the HTF trend info is shown as a label near the risk box when a new signal appears. Lookback (bars) for top anchor How many bars to use to determine the top price level for dashboard placement. Show HTF trend above risk box on signal Only relevant if Dashboard position = Over Risk Info. When enabled, a small HTF label appears near the risk box for each new trade. Signal label vertical offset (ticks) Vertical spacing between risk info label and HTF label. Minimum spacing HTF/Risk (ticks) Ensures a minimum vertical distance so the two labels don’t overlap. HTF signal label X offset (bars) Horizontal offset (left/right) relative to the risk info label. ⏳ 7. ORB–FVG Filters (Session & Time Window) Group: “ORB FVG Filter” Only same session day If enabled, FVG entries are only allowed on the same calendar day as the ORB. When the date changes, all state & drawings are reset. Limit hours after ORB Enables a time window after the ORB end. Trading window after ORB (hours) Length of that window in hours. Example: 2.0 → FVG signals only in the first 2 hours after ORB end. 💰 8. Risk Management & Position Sizing Group: “Risk Management” Calculate position size If enabled, the script computes suggested mini and micro contract size for you. Account size Your trading account size (in account currency). Risk mode Percent – risk is a % of account size (Account risk %). Fixed amount – risk is a fixed dollar amount (Fixed risk ($)). Account risk % Risk per trade as a percentage of account size (e.g. 1.0 for 1%). Fixed risk ($) Fixed risk per trade in dollars when using Fixed amount mode. Micro factor (vs mini) How much a micro contract is worth relative to a mini. Example: 0.1 → one micro moves 1/10 of one mini. Risk Info label For each new trade, a label is shown above the boxes with: Stop distance in price and $ risk per mini Max risk allowed for the trade Suggested mini and micro size Text like: Suggested: 2 mini Suggested: 5 micro or Suggested: no trade This makes the script especially useful for prop-firm rules or strict risk discipline. 🎨 9. Visual Style (Boxes, Labels, ORB Lines) Group: “Box & Label Style (Trade)” Label font size (Very small, Small, Normal, Large) Entry label BG / text color Stop label BG / text color TP label BG / text color Risk info BG / text color Risk box color (entry–stop zone) Reward box color (entry–TP zone) Group: “ORB Style” ORB high line color ORB low line color ORB line width ORB label font size ORB label background color ORB label text color Show ORB midline ORB midline color / width / style (Solid / Dashed / Dotted) ⚠️ 10. Alerts Group: “Alerts” The script defines three alert conditions: Long entry FVG breakout Triggered when a new long signal appears. Short entry FVG breakout Triggered when a new short signal appears. FVG entry (long/short) Generic alert for any new signal (long or short). To use them: Add the indicator to the chart. Open the Alerts dialog → “Condition”. Select this script and one of the alert conditions. Set your preferred expiration and notification settings. Alerts only fire when Enable FVG entry signals, boxes & alerts is on. 🧩 11. How the trading logic flows (summary) Build ORB on 1-minute data during the selected session. Optionally reject the day if ORB is outside the ATR bounds. Wait for a breakout (close above high or below low), respecting HTF trend filter. After breakout, look for the first valid FVG in that direction: Outside the ORB (unless breakout FVG allowed inside) Confirmed by the next candle (no full reclaim) Once confirmed: Compute entry, stop, target. Draw risk/reward boxes and all labels. Optionally show HTF signal label over the risk info. Trigger alerts if enabled. If you disable FVG signals, only steps 1–3 (plus dashboard) are effectively active. ⚠️ 12. Notes & Disclaimer Script is intended for intraday trading up to 15-minute timeframes. All signals are mechanical and do not guarantee profitability. Always backtest and forward-test on your own data before risking real money. This script is for educational purposes only and is not financial advice. 🚀 Quick-start guide Add the script to your chart Use an intraday timeframe ≤ 15 minutes (1m, 3m, 5m, 15m). Works best on liquid indices, futures, FX and large-cap stocks. Set the Morning Range In “Morning Range Session” choose the exchange’s opening window. Examples US index futures (CME): 08:30–08:45 or 08:30–08:35 US stocks (NYSE/Nasdaq): 09:30–09:45 or 09:30–09:35 The ORB is always calculated on 1-minute data internally, so the range stays accurate on higher intraday charts. Keep the default filters at first HTF Trend Filter: ON EMA length = 20 This will only allow trades in the direction of the dominant D/W/M trend. ATR Filter: OFF (optional; you can enable later once you’re comfortable). Use the full trade system In the FVG group leave “Enable FVG entry signals, boxes & alerts” = ON Entry mode: Mid Stop mode: FVG Candle or PrevBar Risk/Reward: 2.0 as a starting point. Set your risk Turn on “Calculate position size”. Enter your Account size and choose either: Risk mode = Percent (e.g. 1.0 = 1% per trade), or Risk mode = Fixed amount (e.g. $250 per trade). The risk info label will show: Stop distance in price and $/contract Max allowed risk Suggested mini and micro contract size. Enable alerts (optional) Open the Alerts dialog → Condition: this script. Choose one of: Long entry FVG breakout Short entry FVG breakout FVG entry (long/short) Choose “Once per bar” or “Once per bar close”, and your preferred notification type. Replay & journal Use the TradingView bar replay tool to step through past days. Focus on: How the ORB defines the structure. How the first confirmed FVG outside the ORB behaves. Whether the risk/TP levels fit your own style and product. 🎛 Recommended settings & profiles These are starting points, not rules. Always adapt to the instrument and your own risk tolerance. 1. Conservative / Trend-following Timeframe: 5m or 15m Morning Range Session: 15-minute ORB around the cash or futures open FVG Threshold %: 0.05–0.1 (filter out very small gaps) Auto threshold: OFF (keep it simple) Allow breakout FVG partly inside ORB: OFF Enable FVG entry signals/boxes/alerts: ON Entry mode: Mid Stop Logic Stop mode: Pivot Pivot left/right: 2–3 Stop buffer: +1–2 ticks HTF Trend Filter Enabled: ON EMA length: 20 ATR Filter Enabled: ON Daily ATR length: 14 Min ORB vs ATR: 0.3–0.4 Max ORB vs ATR: 1.2–1.5 Risk Management Risk mode: Percent Account risk: 0.5–1.0% Idea: Only trade when the higher-timeframe trend supports the move and the opening range is of a “normal” size for the current volatility. 2. Balanced / Intraday directional Timeframe: 3m or 5m FVG Threshold %: 0.02–0.05 Auto threshold: ON (lets the script adapt to volatility) Allow breakout FVG partly inside ORB: ON (first breakout FVG may partly sit inside the ORB) Entry mode: Edge Edge offset (ticks): 0 or +1 Stop Logic Stop mode: FVG Candle Stop buffer: 0–1 ticks HTF Trend Filter Enabled: ON ATR Filter Enabled: OFF (optional) Risk Management Risk mode: Percent Account risk: 1.0–1.5% (if this fits your plan) Idea: Slightly more aggressive entries at the gap edge, still aligned with HTF trend, but with more flexibility on ATR. 3. Aggressive / Scalping around the ORB Timeframe: 1m or 3m FVG Threshold %: 0.0–0.02 Auto threshold: ON Allow breakout FVG partly inside ORB: ON Entry mode: NextOpen or Edge with a negative offset (deeper into the gap) Stop Logic Stop mode: PrevBar Stop buffer: 0 or -1 tick HTF Trend Filter Enabled: OFF (or ON but treat as soft guidance) ATR Filter Enabled: OFF Risk Management Risk mode: Percent Account risk: lower, e.g. 0.25–0.5% per trade Idea: More trades and tighter stops. Best for experienced traders who understand the limitations of scalping and whipsaw risk. Final reminder All of these are templates, not guarantees: Always check how the system behaves on your market and session. Start on replay and demo before trading real money. Adjust filters (HTF, ATR, thresholds) until the signals fit your personal approach.
Indicador Pine Script®
por SebastianMaywald
1
NQ2K SSS# Intelligent Trend Identification **Adaptive Channels**: Utilizes dynamically adjusted volatility channels that automatically optimize parameters based on market volatility **Bull-Bear Judgment**: Monitors trend direction changes in real-time, accurately capturing bull-to-bear conversion opportunities **Signal Confirmation**: Multiple condition verification ensures the reliability of trading signals # ⏰ Precise Timing Control **Scheduled Execution**: Built-in intelligent timing trading system that automatically executes during optimal periods **Cross-day Processing**: Comprehensive handling of overnight positions and cross-trading day logic **Time Filtering**: Customizable trading time windows to focus on high-probability periods # 🛡️ Strict Risk Control System **Automatic Stop Loss**: Risk control mechanism based on fixed percentage **Position Management**: Zero pyramiding strategy, strictly controlling single exposure risk **Real-time Monitoring**: Continuous tracking of position status, timely execution of risk control measures # 📊 Professional Visualization **Trend Visualization**: Clearly displays current trend direction and strength **Signal Marking**: Intuitive buy/sell point markers and trend conversion prompts **Candlestick Coloring**: Real-time candlestick color changes reflect bull-bear power comparison # Applicable Markets **Main Products**: Stock index futures, commodity futures, forex, and other products with moderate volatility **Time Frames**: Suitable for multiple time periods, recommended for daily or 4-hour charts **Market Conditions**: Particularly suitable for markets with clear trends and moderate volatility # Strategy Advantages **Clear Rules**: All trading logic is fully quantified, avoiding subjective judgment interference **Strong Adaptability**: Dynamic parameter adjustment mechanism adapts to different market environments **Rigorous Execution**: Strict timing control and risk management system **Intuitive and Easy to Use**: Clear chart displays and signal prompts for easy monitoring and decision-making
Estratégia Pine Script®
por winds11
Grok/Claude Turtle Trend Pro Strategy Turtle Trend Pro Strategy: A Modern Implementation of the Legendary Turtle Trading System Historical Background: The Original Turtle Experiment In 1983, legendary commodities trader Richard Dennis made a bet with his partner William Eckhardt: could successful trading be taught, or was it an innate skill? To settle the debate, Dennis recruited and trained a group of novices—whom he called "Turtles" (inspired by turtle farms he'd visited in Singapore)—teaching them a complete mechanical trading system. The results were remarkable: over the next four years, the Turtles reportedly earned over $175 million, proving that systematic, rule-based trading could be taught and replicated. The strategy you've shared is a faithful modern adaptation of those original Turtle rules, enhanced with contemporary technical filters. Core Turtle Principles Preserved in This Strategy 1. Donchian Channel Breakouts (The Heart of Turtle Trading) The original Turtles used Donchian Channels—a simple concept where you track the highest high and lowest low over a specific lookback period. This strategy implements both original Turtle systems: System 1 (Default): 20-period entry breakout, 15-period exit System 2 (Optional): 55-period entry breakout, 20-period exit The logic is elegantly simple: Go long when price breaks above the highest high of the last 20 (or 55) periods Go short when price breaks below the lowest low of the last 20 (or 55) periods This captures the Turtle philosophy of trend-following through momentum breakouts—the idea that markets trending strongly in one direction tend to continue. 2. ATR-Based Position Sizing and Stops The Turtles were pioneers in using Average True Range (ATR) for risk management. This strategy preserves that approach: Stop Loss: Set at 2× ATR from entry (the original Turtle rule) ATR Period : 20 days (matching the original) The ATR stop adapts to market volatility—wider stops in volatile markets, tighter stops in calm ones—preventing premature exits while still protecting capital. 3. Opposite Channel Exit Rather than using arbitrary profit targets, the Turtles exited positions when price broke the opposite channel: Exit longs when price breaks below the 15-period (or 20-period) low Exit shorts when price breaks above the 15-period (or 20-period) high This allows winning trades to run while providing a systematic exit that doesn't rely on prediction. Modern Enhancements Beyond the Original System While the core mechanics remain true to 1983, this strategy adds sophisticated filters the original Turtles didn't have access to: Trend Filter (200 EMA) Only takes long trades when price is above the 200-period moving average (and the MA is sloping up), and vice versa for shorts. This aligns trades with the major trend, reducing whipsaws in choppy markets. Set of off by default and fully adjustable in settings. ADX Filter (Trend Strength) The Average Directional Index ensures trades are only taken when the market is actually trending (ADX > 20 threshold). The original Turtles suffered significant drawdowns in ranging markets—this filter addresses that weakness. Optional RSI Filter Adds overbought/oversold confirmation to entries, though this is disabled by default to stay closer to the original system. Volume Confirmation Optional requirement for volume surges on breakouts, adding conviction to signals. The Strategy's Risk Management Framework Parameter Setting Turtle Origin Position Size 10% of equity. Turtles used volatility-adjusted sizing. Stop Loss2× ATR. Original Turtle rule Commission 0.075%. Modern crypto exchange rate. Pyramiding Disabled. Turtles did pyramid, but simplified here. Visual Elements and Regime Detection The strategy includes a "Neural Fusion Pro" styled display that would make the original Turtles jealous: Color-coded Donchian Channels: Green (bullish), Red (bearish), Yellow (neutral) Trend Strength Meter: Combines ADX, price vs. MA distance, channel position, and DI spread Regime Classification : Automatically identifies Bull, Bear, or Neutral market conditions Information Panel: Real-time display of all key metrics Why Turtle Trading Still Works The genius of the Turtle system lies in its mechanical discipline. It removes emotion from trading by providing explicit rules for: What to trade (anything with sufficient liquidity and volatility) When to enter (channel breakouts) How much to trade (volatility-adjusted position sizing) When to exit (opposite breakout or ATR stop) This strategy faithfully preserves that mechanical approach while adding modern filters to improve the win rate in today's markets.
Estratégia Pine Script®
por ralis24
PyraTime Harmonic 369Concept and Methodology PyraTime Harmonic 369 is a quantitative time-projection tool designed to apply Modular Arithmetic to market analysis. Unlike linear time indicators, this tool projects non-linear integer sequences derived from Digital Root Summation (Base-9 Reduction). The core logic utilizes the mathematical progression of the 3-6-9 constants. By anchoring to a user-defined "Origin Pivot," the script projects three distinct harmonic triads to identify potential Temporal Confluence—moments where mathematical time cycles align with price action. Technical Features This script focuses on the Standard Scalar (1x) projection of the Digital Root sequence: The Root-3 Triad (Red): Projects intervals of 174, 285, 396. (Mathematical Sum: 1+7+4=12→3) The Root-6 Triad (Green): Projects intervals of 417, 528, 639. (Mathematical Sum: 4+1+7=12→3, inverted) The Root-9 Triad (Blue): Projects intervals of 741, 852, 963. (Mathematical Sum: 7+4+1=12→3... completion to 9) How to Use Set Anchor: Input the time of a significant High or Low in the settings. Select Resolution: This tool is optimized for 1-minute (Micro-Harmonics) and 15-minute (Intraday Harmonics) charts. Analyze Clusters: The vertical lines represent calculated harmonic intervals. Traders look for "Clusters" where a Root-3 and Root-9 cycle land on adjacent bars, indicating a high-probability pivot. System Architecture & Version Comparison This script represents the foundational layer of the PyraTime ecosystem. This Script (PyraTime Harmonic 369): Scalar: Standard 1x Multiplier only. Focus: Intraday & Micro-structure (1m, 15m). Engine: Core Digital Root Integers. PyraTime Harmonic Matrix (Advanced Edition): Scalar Engine: Unlocks Quad-Fractal (4x), Tri-Fractal (3x), and Bi-Fractal (2x) multipliers for institutional cycle analysis. Apex Logic: Auto-detection of the "963" Completion Sequence (Gold Highlight). Event Horizon: Includes a live Predictive Dashboard that calculates the time-delta to the next harmonic event across all scalar groups. Disclaimer This tool is for the educational analysis of Number Theory in financial markets. It projects time intervals and does not predict price direction. Past performance does not guarantee future results.
Indicador Pine Script®
por PyraTime
Crypto Signals & Overlays –29-11-2025Nebula Crypto Signals & Overlays Nebula is a multi-timeframe trend and momentum indicator designed for high-cap crypto pairs (BTC, ETH, SOL, DOGE, etc.). • Uses 21/50/200 EMAs + higher-timeframe EMA for trend filtering • RSI and Bollinger Bands for momentum and squeeze detection • Generates BUY/SELL labels on trend-side pullbacks • ATR line as a dynamic stop/target guide, plus pivot-based support/resistance zones • Background colors: green = bullish regime, red = bearish regime, yellow = low-volatility squeeze Not financial advice. Always backtest and use proper risk management before trading live.
Indicador Pine Script®
por kamransheikh70670