20 EMA Cross 50 EMA + 4-5 Week Consolidation + Volume BreakoutBullish cross with consolidation and volume breakout
Candlestick analysis
Flat Breakout Detector🔹 English Description
Flat Breakout Detector is a tool designed to highlight the most interesting moments when the market shifts from quiet, sideways trading into active movement.
Most of the time (about 80%), the price stays in flat ranges, where trading is often inconvenient or unprofitable. The most valuable opportunities usually appear when the price leaves the flat zone and initiates a new move. These breakouts are easy to miss if you monitor the market manually — but this indicator helps you avoid that.
The indicator detects relatively volatile or impulsive candles compared to the previous ones. Such moves may suggest the start of a new trend, a shift in market behavior, or the appearance of an initiating side. Whenever volatility increases and price begins to deviate strongly, the indicator highlights these breakout moments. The higher the standard deviation, the higher the probability that a meaningful move is underway.
🔎 Tip: Watch carefully when the reading passes the third standard deviation — these are the most significant breakouts.
⚠️ Disclaimer: This indicator is not a direct buy/sell signal. It only shows moments of increased volatility and possible breakout conditions. Use it as a scanner to catch breakout opportunities, and then perform your own technical and volume analysis before deciding to trade.
🔹 Русское описание
Flat Breakout Detector — это инструмент, который подсвечивает самые интересные моменты перехода рынка из состояния спокойного бокового движения к активному тренду.
В среднем около 80% времени цена находится во флете, и торговать в такие периоды не всегда удобно или выгодно. Наиболее сильные возможности появляются в моменты выхода из флета, но их легко пропустить при ручном наблюдении. Данный индикатор позволяет этого избежать.
Индикатор находит относительно волатильные или импульсные свечи по сравнению с предыдущими. Подобные свечи могут указывать на начало нового тренда, изменение рыночной структуры или появление активной стороны (покупателей или продавцов). Когда цена становится более волатильной и проходит значительные отклонения, индикатор подсвечивает эти моменты. Чем выше стандартное отклонение, тем выше вероятность, что начинается серьёзное движение.
🔎 Рекомендация: особенно обращайте внимание на выход за третье стандартное отклонение — именно там часто начинаются ключевые пробои.
⚠️ Дисклеймер: данный индикатор не является прямым сигналом для входа или выхода из сделки. Он лишь указывает на моменты повышенной волатильности и возможного выхода из флета. Используйте его как сканер для поиска ситуаций и применяйте собственный технический и объёмный анализ, прежде чем принимать торговое решение.
Sind_1Active trades visible:
Multiple position boxes với clear risk/reward ratios
R/R từ 3.72 đến 6.86 - impressive ratios
SL placement logic theo volume spike points
Volume confirmation:
Chuông cam X marks tại key rejection/support points
Clear volume backing tại các levels quan trọng
Pattern "hoàn công" trước khi entry
Strategy execution:
Chart này demonstrate exactly what bạn described:
D1 patterns tạo major structure (yellow levels)
Lower TF patterns refine entry zones
Volume spikes confirm institutional activity
CHOCH validation on M1 before entry
Precise SL placement after volume confirmation
The position sizing và profit targets show disciplined approach. Having multiple timeframe confluence với volume backing creates high-probability setups với excellent risk/reward ratios.
MT-Hidden Breaker Blocks Tracker-acThe MT-Hidden Breaker Blocks Tracker is a powerful indicator designed for SMC traders. Rooted in Smart Money Concepts (SMC), it uncovers institutional order flow by identifying Order Blocks (OB), Breaker Blocks (BB), and Partial Breaker Blocks (PBB) across multiple timeframes, revealing hidden liquidity zones for precise market structure analysis.
═══════ Key Features ═══════
Smart Money Detection: Order Blocks (OB): Pinpoints key candles before major market moves, marking institutional entry zones.
Breaker Blocks (BB): Detects OBs aligned with Fair Value Gaps (FVGs), signaling liquidity zones.
Partial Breaker Blocks (PBB): Tracks partially mitigated BBs for reaccumulation or distribution setups.
The MT-Hidden Breaker Blocks Tracker features a REPLAY-MODE that allows traders to analyze historical Order Blocks (OB), Breaker Blocks (BB), and Partial Breaker Blocks (PBB) with Fair Value Gaps (FVGs) directly on the current timeframe, enabling precise backtesting of SMC strategies.
Multi-Timeframe Liquidity Analysis: 70 pre-configured timeframes across five groups:
Group 1: Minutes & Hours (5m–4h)
Group 2: Hours (5h–23h)
Group 3: Days (1D–19D)
Group 4: Weeks (1W–12W)
Group 5: Months (1M–12M)
Group 6: 19 customizable timeframes for tailored strategies.
Advanced SMC Tools: FVG Filter: Enhances BB/PBB signals with 1–5 FVGs for high-probability setups.
Dynamic Mitigation: Monitors block mitigation in real-time with adjustable thresholds.
Columnar Confluence Display: Visualizes liquidity zones in timeframe-specific columns, highlighting multi-timeframe confluence.
Non-24/7 Market Support: Handles gaps in equities and forex markets.
Auto-Current Timeframe: Displays analysis for the chart’s active timeframe.
Visual Customization: Configurable bull/bear block colors.
Adjustable borders, widths, and timeframe labels with FVG counts.
Extended box projections for forecasting price action.
Clean, non-obtrusive overlay for seamless chart integration.
═══════ How It Works ═══════
The MT-HiddenLiquidityTracker leverages SMC principles to detect institutional order flow by analyzing Order Blocks and their evolution into Breaker or Partial Breaker Blocks. It scans multiple timeframes to uncover liquidity pools, using FVGs to filter high-probability signals. The columnar display highlights confluence zones, making it easy to spot where smart money activity converges, ideal for SMC trading strategies.
═══════ How to Use ═══════
Select Timeframe Group: Choose Current, Groups 1–5, or Custom timeframes.
Configure Block Types: Enable OB-only, BB/PBB-only, or all blocks.
Set FVG Filter: Specify 1–5 FVGs for BB/PBB detection (optional).
Customize Visuals: Adjust colors, labels, borders, and box extensions.
Tune Detection: Set OB sensitivity and mitigation thresholds.
═══════ Why It Stands Out ═══════
Unlike generic indicators, the MT-Hidden Breaker Blocks Tracker combines SMC-based liquidity hunting with multi-timeframe analysis, offering a unique approach to institutional order flow. Its FVG filtering, extensive timeframe options, and columnar confluence display provide clarity for ICT/SMC traders seeking high-probability setups in forex, crypto, and indices.
═══════ Best Practices ═══════
Prioritize higher-timeframe blocks (Groups 3–6) for major liquidity zones.
Combine with volume or price action for signal confirmation.
Use FVG counts to assess block strength.
Target confluence zones for stronger trade setups.
═══════ Performance Notes ═══════
Optimized for real-time analysis with efficient rendering.
Manages visuals within TradingView’s limits.
Supports historical analysis up to 10,000 bars.
Built in Pine Script v6, Beta version.
═══════ Access ═══════
As long as it's in beta, the script is free to use.
Contact LiquidityForgeSMC via TradingView’s messaging system for details.
═══════ Disclaimer ═══════
This indicator is for educational and analytical purposes only and does not constitute financial, investment, or trading advice. Always conduct your own analysis before trading. The indicator is in active development, with additional SMC features planned for future updates.
INSTRUCTIONS: youtube.com/watch?v=2528OdJIhBg
Z-Score Probability Indicator 2.0Z-Score Probability Indicator 2.0 — by TanTechTrades™
See trend shifts before they’re obvious.
This upgraded Z-Score toolkit combines a more accurate Z-Score moving average (Z-SMA) with an optional classic SMA to separate noise from genuine regime changes. It maps price into standard-deviation space, highlights probability zones, and prints projected ±σ price levels—so you can judge where price sits in the distribution and how likely continuation or mean reversion is.
What it does
Z-Score of price (close, with optional candle view): Normalizes price relative to a rolling mean and volatility to show how extreme current levels are.
Z-SMA (trend backbone): A moving average of the Z-Score itself smooths the signal and helps confirm when a bias truly flips.
Probability bands (±1σ / ±2σ / ±3σ): Color-filled zones visualize where most observations tend to occur (green ≈ typical, yellow ≈ stretched, red ≈ statistically rare).
Projected price levels: Live labels print the price implied at 0, ±1σ, ±2σ, ±3σ using the chart’s SMA and standard deviation—handy for targets, fades, and risk framing.
Z-Table panel: A compact table shows your current Z bucket (−3 … +3) and reference probabilities at a glance.
Alert-ready regime logic: Optional alerts fire only when direction is aligned with the Z-SMA (e.g., line red and Z-SMA < 0).
How to read it
Line mode (default):
Green line above 0 → positive Z (price above its mean).
Red line below 0 → negative Z (price below its mean).
Bias confirmation: When Z-SMA crosses and holds above/below 0, the backdrop is shifting—not just wobbling.
Candle mode (optional): Renders Z-Score as candles (open/high/low/close in Z-space) to spot intrabar extremes vs. closes.
Distribution fills:
|Z| < 1 (green): typical noise / mean zone.
1 ≤ |Z| < 2 (yellow): stretched.
|Z| ≥ 2 (red): statistically rare—watch for either continuation in strong trends or snap-back risks.
Price labels (0/±1/±2/±3σ): Where price would be if it reverted to the mean or pushed to the next σ boundary—great for planning TPs/hedges.
Signals & Alerts
Green Line Alert (SMA Above 0): Z line is green and Z-SMA > 0 → pro-trend bullish context.
Red Line Alert (SMA Below 0): Z line is red and Z-SMA < 0 → pro-trend bearish context.
Use these to filter entries from your primary trigger (breakouts, pullbacks, momentum crosses, etc.).
Inputs (key settings)
Lookback Length (default 75): Window for Z-Score calc (mean & stdev).
Plot Type: Line (clean regime read) or Candles (intrabar Z detail).
SMA Length (default 75): Optional classic SMA length; reduce (e.g., 14) for responsiveness.
Distribution Probability Fills: Toggle zone shading.
Show Z-Table: On-chart Z bucket & reference probabilities.
Show SMA: Toggle the Z-SMA line.
Show SMA Standard Deviation Bands: Plots ±1σ around Z-SMA for added volatility context.
Round Target Prices Up or Down: Controls precision of the ±σ price labels.
Indicator Timeframe (Only Hourly presets): Override source timeframe (e.g., 30/60/120/240/360/720 mins).
Z-Score Line Width: Visual thickness for the main line.
Practical playbooks
Trend confirmation: Trade in the direction of the Z-SMA once it’s firmly above/below 0; use pullbacks toward 0Z as entries.
Mean-reversion fades: Look for exhaustion when Z pushes into ±2σ/±3σ zones against the Z-SMA direction.
Targets & risk: Use the projected ±σ price labels to set tiered TPs or stop placement aligned with current volatility.
Notes
Works on any symbol/timeframe; timeframe override lets you anchor to higher-timeframe hourly multiples while trading lower charts.
Z-Score is sensitive to volatility regime shifts; the Z-SMA smooths this and helps avoid whipsaw around 0.
Always pair with sound risk management; statistical “rarity” is not a guarantee of reversal.
TanTechTrades™ — turning probability into practical trading context.
进场与止损参考指标Disclaimer
The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information.
All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
让你更好的把握进场点，实现无脑进场的效果。
止损参考线，有效控制资金风险
EMA + RSI + Candle Pattern StrategyEMA RSI CANDLE PATTERN
calculates ema 9,20 and 50 along with RSI and identifies patterns
Auto Zones + DashboardAuto Zones + Dashboard
This indicator is an all-in-one trade planning toolkit.
It automatically maps Entry/SL/TP zones, shows dynamic support/resistance levels, and gives a clear market overview through a smart Meter and a compact Dashboard.
🔧 Features
Auto Zones (Entry/SL/TP)
Automatically plots Entry, Stop-Loss, and three Take-Profit levels (TP1/TP2/TP3 based on Fib multipliers).
Relative Levels
Dynamic support/resistance lines around the 50-SMA base with optional auto-hide when too far from price.
Labeled as: Deep Support, Support, Resistance, Psychological, Key Level, Target 1, Target 2.
Dashboard (top-right)
Compact panel showing:
RSI & Divergence (Bull/Bear/None)
Volume state (High/Low/Neutral vs. SMA)
MACD histogram
Signal (LONG / SHORT / WAIT)
Trend strength (via SMA50 slope & price relation)
Meter Score (0–100) and Recommendation
Probabilities P(Long) / P(Short)
Smart Meter (HTF filter + multi-factor score)
Uses RSI, MACD, EMA alignment, RVOL, ATR%, ADX, EMA gap, and breakout conditions to calculate a weighted score and directional recommendation.
Bars can be highlighted when Score ≥ 70 in breakout trend conditions.
MA50 (SMA)
Optional trend filter line with customizable color and width.
✅ How to use
Zones: Plan trades with Entry/SL/TP boxes automatically plotted.
Levels: Watch relative support/resistance for confluence.
Dashboard + Meter: Quickly assess momentum, volume, trend strength, and probabilities.
⚠️ Disclaimer: This tool is for educational and analytical purposes only. Not financial advice. Always use your own strategy and risk management.
Short tagline:
Auto Entry/SL/TP zones, dynamic support/resistance, and a smart Dashboard with Meter — all in one.
BTC 2024 Toolkit (MAs, BB, Niveles, Eventos)Main uptrend following the March 2024 ATH; correction in April (before/after the halving) and capitulation in August with a rebound.
Key zones drawn in the script: 73–74k (resistance/ceiling), 68–70k, and 64.2k/61.3k/58.4k (pullbacks), plus 49–53k (August floor).
The 50/100/200 MAs are sloping upward at the yearly close; Bollinger Bands are free of prolonged excesses.
Bias: Bullish, buy on pullbacks/pullbacks.
Entry A (breakout throwback): Wait for a breakout and a pullback that respects 73–74k as new support.
Entry B (range pullback): Staggered buys at 68–70k and, if there is further weakness, at 64–65k.
Invalidation/Stop: Daily close < 59–60k (loss of range/structure).
Targets:
TP1: 92–95k (natural post-breakout extension).
TP2: 100k+ if MAs remain upward and momentum holds.
Rationale: The 73–74k level is the "pivot" for the year; buying the pullback to that area (or to 68–70k) offers a better risk/reward than chasing the price. The stop below 60k limits exposure if the breakout fails.
ORB Strategy + VWAP Criteria + Stop Loss and TPs by GOCHThis indicator will let you know once any 5 minute candle breaks the orb limits, establishing the amount of stop loss points, and also establishing the take profit zone. Each zone between ranges is equivalent to the amount of stop loss points.
The indicator will only trigger if the vwap is not in between the entry price and the TP2 price.
This is a profitable strategy if you stick to being consistent with your lot.
The correct setup is:
Opening Range: 15 Min
Custom Range:
7:30-7:45 UTC-6
Gabriel's Triple Impulsive Candle DetectorTriple Impulsive Candle Detector
Overview, critical for catching impulse moves in either direction.
SPX Income System is a rule-based framework designed to identify frequent, high-probability income opportunities on the S&P 500 cash index (SPX/SPY) using 0-DTE credit spreads. The core engine operates on 30-minute Impulse bars during the morning trade window and can be extended with optional modules for afternoon, overnight, and weekly swing opportunities. The methodology centers on a single, mechanical price event called a Impulse Bar (small wick to body ratio) to minimize discretion and keep execution consistent.
🔶What’s Inside
Core Strategy: SPX Daily Income
Timeframe: 3 kinds of 30-min bars.
Window: 09:30–11:30 ET (new setups only)
Instrument: SPX (cash index, XSP/SPY), executed with $5-wide credit spreads on 0-DTE SPX options
Bullish Setup
Entry on the break of setup bar high
Use an at the money put credit spread
Bearish Setup
Entry on the break of setup bar low
Use an at the money call credit spread
Intent: Enter shortly after setup; manage to >80% max profit or EOD expiration if SPX. If it's another stock, then a 1.5~2x D ATR is suggested.
Signal: An Impulse Bar that closes at/near the high (bullish) or low (bearish) of its 30-min range, verified with Volume above average.
Risk—limited to the risk of the option spread.
The spread is 5 dollars wide
The premium collected is $2.50
$5 - 2.50 = $2.50, or the breakeven point.
Which means what's left is the risk involved.
The risk is $2.50 per spread
🔶Why the 30-Minute Chart?
The 30-minute bar is the “chart of choice” because it filters noise and aligns with morning institutional flows.
On alternate timeframes, price often retraces half the candle body before following through.
On the 30m: the follow-through is more consistent, especially with 2x volume confirmation.
Adding support/resistance levels at the impulse bar hl2 strengthens execution.
This strategy has roots in MTF Crypto, and SPX/SPY TPO-Order Block logic.
🔶Bonus Examples:
🔹Afternoon SPX Income
Second chance window (typically 14:00–15:00 ET) if the morning trade has exited, 60-min bars instead.
🔹ORB 30 – Opening Range Break (first 30 min)
Classic ORB with an income twist for early action when time is limited. This can be entered on the 15 minute candle break.
🔹ORB 60 – Opening Range Break (second 30 min)
A follow-up ORB variant for traders who miss the first window, verified on a 60-min chart. Enter on the final 3 minutes of the hourly candle or wait for a pullback.
🔹B&B – Bed & Breakfast (Overnight)
Identifies income setups via the 10-minute chart in the last 30–60 minutes of the session with next-day open as the exit.
🔹JB – Just Breakfast
Uses the prior day’s end-of-day setup to enter at the opening bell, then manages into the daily income flow. I trade 0-date, and selling an ITM spread either partially or fully then gives me a head start on the daily income potential. This may work better if you either roll or the ORB 30 also meets the criteria.
🔹All-Day-Scalper
Converts income logic into 30-minute scalps using deep 75/80 delta ITM options as synthetic stock (requires >PDT). Meaning that the option will behave as if it is stock. This strategy comes with a warning: it's better if you can day trade.
🔹Tag ’n Turn—Weekly SPX Income Swing
Weekly swing overlay using 30-min Pulse Bars + Bollinger Bands (50) for 3–7 day swings and as a filter for daily income alignment. I use the TTM Squeeze and obtain similar results. Target heuristics (directional days) with a fired squeeze.
Part of my Gamma Scalping System.
🔶The Impulse Bar (10~40% Wick to Body Bar)
An Impulse Bar is a candle that:
Bullish: Closes higher than it opens and within the top ~10% of its high-low range.
Bearish: Closes lower than it opens and within the bottom ~10% of its high-low range.
Practical tip: Many traders mark 0-10-80-100% levels on the candle range (custom Fib or ruler) to quickly validate Pulse Bars. If it's accompanied by a volume spike, then it's better quality.
🔶SPX Daily Income—Rules & Execution
🔹Rules
Chart: 30 min, no indicators required. Pure PA, TPO-based strategy.
New Setups: 09:30–11:30 ET
Instrument: SPX signals, executed via SPX 0-DTE credit spreads ($5 wide, $2 for SPY)
🔹Entries
Bullish: Enter on a break of the setup bar high, use ATM put credit spread
Bearish: Enter on a break of the setup bar low, use ATM call credit spread
🔹Exits
Primary: Close at >80% of max profit (credit received)
Alternate: Hold to EOD expiration
Stop: Risk of the spread (defined by width – credit)
Target Heuristics (directional days)
Optional: 1.5–2× ATR as a reference (mirrors directional follow-through that often accelerates the >80% outcome)
Credit Guidance (typical)
OTM short strike ≈ $2.40
ITM short strike ≈ $2.50–$2.80
2× ITM short strike ≈ $2.80–$3.00
Trade Management (PDT-Aware)
If under PDT, many prefer set-and-forget with GTC buy-back (e.g., $0.20) or EOD expiration.
1:00 PM ET time check
Trending day ±$15–$20 SPX: usually no action, run to expiration
Non-trending day ±$5 SPX: consider taking 40–60% if available (optional) to avoid 50/50 end-of-day decay dynamics
Rationale: Without a favorable trend by ~1 PM, the odds of a late push decline; choosing a controlled partial outcome can improve long-run expectancy and reduce variance.
🔶Examples (Conceptual)
🔹Bullish: A green dot marks a bullish impulse bar; minor follow-through pushes the spread to >80% quickly.
🔹Bearish: A red triangle marks a bearish Impulse Bar; a modest down move is often sufficient for >80–95%.
🔹Tag ’n Turn—Weekly Swing (Filter & Stand-Alone)
Chart: 30-minute
Overlay: Bollinger Bands 50 (mean-reversion lens), or KC or TTM.
Setup: Tag of upper/lower band + Pulse Bar, enter on break of Pulse Bar in that direction
Target: Opposite Bollinger Band
Use Case: 3–7 day swings and a directional filter for Daily Income signals (trade with weekly bias)
🔹Afternoon SPX Income: Same Pulse logic, 14:00–15:00 ET window.
🔹ORB 30 / ORB 60: Uses 30/60-min opening range; can relax Pulse threshold (up to 40% bars) for early positioning when time-constrained.
🔹B&B (Overnight): Lasts 30–60 minutes; closes the next day at open or after the first 30-minute bar.
🔹JB (Just Breakfast): Enter at open using prior day’s signal; optionally roll into Daily Income if eligible.
🔹All-Day-Scalper: Deep ITM options (~0.75–0.80 delta) as synthetic stock.
Entry: Long ITM option
Stop: ~40% of option price
Target: 70–150% or 30-minute timed exit
Note: Time-intensive; for accounts above PDT.
🔹Brokerage: Must efficiently support SPX options; a <10% spread between OI and Volume is ideal. Preferences vary; Tastytrade, Thinkorswim, and Interactive Brokers are common choices. Use what’s reliable, available in your region, and cost-effective.
🔶Alerts (Check-in)
Bullish Impulse Detected (within 09:30–11:30 ET)
Bearish Impulse Detected (within 09:30–11:30 ET)
Afternoon Pulse (14:00–15:00 ET)
ORB 30/60 Trigger
B&B Window Open (last 60 mins)
JB at Open
Tag ’n Turn: Band Tag + Impulse (Bull/Bear)
🔶Inputs (Typical)
Session windows (morning, afternoon, last hour) ~5~15 Average Bar
Impulse threshold (strict 10% vs relaxed up to 40% for ORB variants)
Marker/label styles (bull/bear colors, dots vs arrows)
Filters (optional ATR TP, band touch BB(50-SMA, 2 Stdv.) for Tag ’n Turn)
Alert toggles (on-close for webhooks)
🔶Best Practices
One playbook, many Doors: Start with daily income; add afternoon or B&B/JB only after you’re consistent.
Credit discipline: Don’t chase poor pricing; stick to the credit guidance.
Time awareness: If no trend by ~1 PM ET, consider variance control.
Weekly bias: When using Tag ’n Turn, align daily trades with the weekly swing direction for added confluence.
Risk is defined as width – credit = max risk per spread. Size, accordingly, 1~2%.
🔶Disclosures & Risk
This is not financial advice. Options involve risk and are not suitable for all investors. Past performance (including backtests or theoretical studies) does not guarantee future results. Slippage, fills, assignment risk, and latency can materially impact outcomes. Trade a plan you fully understand and always size for durability. On the Daily, the Impulse bars, are often a signal that you should plan for it to return back to half of the Candle's body, and plan accordingly. Plot a horizontal support/resistance level and see how price reacts to it. Keep house-money, and use 1~2% Risk, reduce exposure when VIX is low and increase it when VIX is high.
TL;DR (Summary)
Signal: 30-min Pulse Bar (strict 10% close in range)
Window: 09:30–11:30 ET (new setups)
Execution: 0-DTE $5-wide SPX credit spreads
Exit: >80% max profit or EOD
Add-ons: Afternoon, ORB 30/60, B&B/JB overnights, All-Day-Scalper, Tag ’n Turn weekly swing/filter
Philosophy: Fully rule-based, minimal discretion, production-line consistency 0-date.
TrendburstHigh quality scalping strategy NQ futures with 1 contract, that will only trade between the 8.30AM to 10 AM ET window for the entries (very selective with a 57% win rate), but will let the runners win. Trades closes flat at 15.50 ET. ****Not suitable for small accounts****, **** Past performances are not indicative of future results****
Premium ORB + ICT [GC Trading Systems] v1📘 Ultimate Draw on Liquidity (DOL) Tool – Documentation
The Ultimate DOL Tool is a liquidity-based framework designed to help traders identify where price is most likely to move and when to act. Unlike standard liquidity or FVG indicators, this script combines multiple advanced liquidity concepts with entry models and unique fill-level tracking to give traders both context and execution ideas.
🔑 What Makes This Script Unique
- HTF FVG Fill Tracking – Most scripts simply draw Fair Value Gaps. This tool not only plots Higher-Timeframe FVGs (HTF FVGs) but also allows them to act as Draw on Liquidity (DOL) levels. The indicator will automatically extend these gaps forward when price fills them, clearly showing when and where liquidity is taken.
Reversal Model – Goes beyond simple sweep detection. This model waits for the Opening Range Breakout (ORB) and/or user-selected liquidity levels (e.g., session highs/lows, BSL/SSL) to be swept. After the sweep, it automatically plots an entry arrow on the first internal FVG (iFVG) that forms, helping traders spot high-probability reversals.
FVG Trend Model – After price begins breaking out of the ORB, the indicator scans for FVG rebalances that align with momentum. It highlights continuation opportunities to trade in the direction of sentiment.
iFVG Trend Model – Also activates after an ORB breakout but instead scans for Inverse FVGs to follow market sentiment. This gives traders an additional entry framework not found in other scripts.
Complete Liquidity Mapping – No other tool automatically draws as many key Draw on Liquidity levels: Asia, London, Overnight, Previous Day High/Low, Buy-Side Liquidity (BSL), Sell-Side Liquidity (SSL), and HTF FVG fills — all extended forward when price meets them. This gives traders a full picture of liquidity targets.
Unique Visual Design – Every DOL level automatically extends when price interacts with it. This subtle but powerful feature allows traders to clearly see when liquidity is taken and when markets rebalance, something not offered by standard session or FVG indicators.
📖 Key Concepts
Opening Range Breakout (ORB)
The ORB marks the high/low of a defined initial session period (e.g., first 15/30/60 minutes).
- Establishes early liquidity pools.
- Breakouts or reversals from ORB levels often define intraday bias.
Fair Value Gaps (FVGs)
A Fair Value Gap occurs when a three-candle imbalance forms, leaving inefficient price delivery. Price often returns to “rebalance” these areas before continuing.
Higher-Timeframe FVGs (HTF FVGs)
HTF FVGs provide context from larger timeframes (1H, 4H, Daily). With this script, they are extended forward when filled, allowing traders to see when higher-timeframe imbalances act as liquidity magnets.
Buy-Side & Sell-Side Liquidity (BSL/SSL)
Levels above swing highs (BSL) or below swing lows (SSL) are natural liquidity pools. This tool automatically tracks and extends them forward for clear visualization.
⚙️ How to Use
This indicator is designed to give you location → direction → execution :
1. Location with ORB
- The ORB defines the early session’s liquidity pool.
- Use it to gauge where price is reacting and whether momentum is building.
2. Direction with Draw on Liquidity (DOL)
Turn on your preferred DOL levels:
- Overnight highs/lows
- Major BSL/SSL levels
- HTF FVGs with fill tracking
These levels suggest where price is most likely headed next.
3. Execution with Entry Models
Reversal Model → For liquidity sweeps and sharp reversals.
FVG Trend Model → For continuation trades after ORB breakouts.
iFVG Trend Model → For inverse gap setups in trending conditions.
Use these signals to time entries from the opening range → liquidity draw target .
📈 Best Practices
- Combine higher-timeframe context with lower-timeframe execution.
- Use DOL levels as targets and entry models as triggers.
- Always apply sound risk management.
⚠️ Disclaimer: This tool is for educational purposes only. It does not guarantee profits. Always trade responsibly.
K-Rib VWAP Crossover — On The Mark TradingK-Rib VWAP Crossover — User Guide
What it is
A fast, rule-based crossover system built on a Kalman-smoothed moving-average ribbon (“K-Rib”).
It plots a Fast line (inner rib) and a Slow line (outer rib). Trades trigger when the Fast crosses the Slow, with optional slope, compression, buffer, and VWAP filters to cut noise. Non-repaint mode is supported.
How signals are built
Kalman + Ribbon
Price is filtered with a 1-D Kalman filter (R = measurement noise, Q = process noise), then optionally smoothed (RMA/EMA).
A rib set turns that baseline into multiple lengths; the script uses s1 (fastest rib) and the outermost rib as Fast/Slow.
Buffered crossover
Long when Fast > Slow + buffer and it was not above by buffer on the prior bar.
Short when Fast < Slow − buffer and it was not below by buffer on the prior bar.
Buffer can be None, % of price, or ATR × multiplier (default).
Filters (optional)
Slope: require the midline slope to agree (up for longs, down for shorts).
Compression gate: only allow signals if the ribbon was tight on the previous bar (true breakout behavior).
Bar-close confirm: waits for the bar to close → non-repaint.
VWAP bias (optional)
Longs only if price is above VWAP (or above upper band if you require bands).
Shorts only if below VWAP (or below lower band).
Alerts fire on final (filtered) long/short signals.
Presets (one-click)
Breakout (Tight / Standard / Loose)
Sets compression & ATR buffer for you. Use Tight for very noisy LTFs, Loose for smoother HTFs/trending markets.
Custom
You control everything (confirm, slope, compression, buffer type/value).
Inputs cheat-sheet
Kalman (R, Q, Smoothing):
Higher R → trust price less → slower/smoother.
Higher Q → allow more state change → faster/snappier.
Ribbon: number of ribs & MA type for the baseline (RMA/EMA). Crossover uses s1 vs outermost.
Crossover:
Confirm on close = non-repaint.
Slope agreement = trend-aligned signals.
Compression = breakout-style filter; threshold is fraction of price.
Buffer = None / % / ATR× (robust across symbols/TFs).
VWAP:
Enable bias, require band breach or not, sigma and length.
Optional plots for VWAP and bands.
Visuals:
Fast/Slow colors change with slope; optional fill; tiny L/S markers on signals.
Quick start (sensible defaults)
5–15m crypto/FX: Preset = Breakout (Standard), ATR len 14, buffer × 0.06, Compression ≤ 0.012, Confirm on close ON, Slope ON, VWAP bias OFF (or ON during sessions).
1H–4H swing: Try Loose preset; you can raise R a bit (smoother) and keep slope ON.
How to trade it (simple)
Breakout-continuation
Take Long when long signal prints; SL under local swing or 0.7–1.0× ATR; TP at 1.5–2R or trail.
Fade the failed cross (advanced)
If a signal prints against HTF bias and quickly fails back through Slow, fade back into the HTF direction (use at your discretion).
Tip: Combine with HTF bias (e.g., 1H trend UP) and trade LTF signals with that bias.
Repainting note
With Confirm on close = ON, the signal is locked at bar close (no repaint).
Turning it OFF allows early prints that can flip intrabar.
Best practices
Prefer ATR buffer over raw % for instruments with changing volatility.
Tighten compression threshold for scalping; relax for HTFs.
Avoid trading into high-impact news; widen buffers in high-vol regimes.
Disclaimer: Educational use only. Not financial advice. Trade responsibly.
Breakout TraderThis script is designed to catch breakout opportunities that develop after a clear trend has already been established. By tracking price pivots and measuring key retracement levels, it can identify points where momentum shifts create the setup for a potential continuation move. These signals often occur when a failed attempt to push price further in the opposite direction leads instead to renewed strength in the original trend.
It is particularly effective on lower time frames, where breakouts can quickly evolve into strong extended moves. On charts like the 1-minute or 3-minute, the script helps traders capture these fast-developing opportunities, giving early warnings of potential entries that may lead to much longer trend extensions.
Ramen & OJ V1Ramen & OJ V1 — Strategy Overview
Ramen & OJ V1 is a mechanical price-action system built around two entry archetypes—Engulfing and Momentum—with trend gates, session controls, risk rails, and optional interval take-profits. It’s designed to behave the same way you’d trade it manually: wait for a qualified impulse, enter with discipline (optionally on a measured retracement), and manage the position with clear, rules-based exits.
Core Idea (What the engine does)
At its heart, the strategy looks for a decisive candle, then trades in alignment with your defined trend gates and flattens when that bias is no longer valid.
Entry Candle Type
Engulfing: The body of the current candle swallows the prior candle’s body (classic momentum shift).
Momentum: A simple directional body (close > open for longs, close < open for shorts).
Body Filter (lookback): Optional guard that requires the current body to be at least as large as the max body from the last N bars. This keeps you from chasing weak signals.
Primary MA (Entry/Exit Role):
Gate (optional): Require price to be above the Primary MA for longs / below for shorts.
Exit (always): Base exit occurs when price closes back across the Primary MA against your position.
Longs: qualifying bullish candle + pass all enabled filters.
Shorts: mirror logic.
Entries (Impulse vs. Pullback)
You choose how aggressive to be:
Market/Bars-Close Entry: Fire on the bar that confirms the signal (respecting filters and sessions).
Retracement Entry (optional): Instead of chasing the close, place a limit around a configurable % of the signal candle’s range (e.g., 50%). This buys the dip/sells the pop with structure, often improving average entry and risk.
Flip logic is handled: when an opposite, fully-qualified signal appears while in a position, the strategy closes first and then opens the new direction per rules.
Exits & Trade Management
Primary Exit: Price closing back across the Primary MA against your position.
Interval Take-Profit (optional):
Pre-Placed (native): Automatically lays out laddered limit targets every X ticks with OCO behavior. Each rung can carry its own stop (per-rung risk). Clean, broker-like behavior in backtests.
Manual (legacy): Closes slices as price steps through the ladder levels intrabar. Useful for platforms/brokers that need incremental closes rather than bracketed OCOs.
Per-Trade Stop: Choose ticks or dollars, and whether the $ stop is per position or per contract. When pre-placed TP is on, each rung uses a coordinated OCO stop; otherwise a single hard stop is attached.
Risk Rails (Session P&L Controls)
Session Soft Lock: When a session profit target or loss limit is hit, the strategy stops taking new trades but does not force-close open positions.
Session Hard Lock: On reaching your session P&L limit, all orders are canceled and the strategy flattens immediately. No new orders until the next session.
These rails help keep good days good and bad days survivable.
Filters & How They Work Together
1) Trend & Bias
Primary MA Gate (optional): Only long above / only short below. This keeps signals aligned with your primary bias.
Primary MA Slope Filter (optional): Require a minimum up/down slope (in degrees over a defined bar span). It’s a simple way to force impulse alignment—green light only when the MA is actually moving up for longs (or down for shorts).
Secondary MA Filter (optional): An additional trend gate (SMA/EMA, often a 200). Price must be on the correct side of this higher-timeframe proxy to trade. Great for avoiding countertrend picks.
How to combine:
Use Secondary MA as the “big picture” bias, Primary MA gate as your local regime check, and Slope to ensure momentum in that regime. That three-layer stack cuts a lot of chop.
2) Volatility/Exhaustion
CCI Dead Zone Filter (optional): Trades only when CCI is inside a specified band (default ±200). This avoids entries when price is extremely stretched; think of it as a no-chase rule.
TTM Squeeze Filter (optional): When enabled, the strategy avoids entries during a squeeze (Bollinger Bands inside Keltner Channels). You’re effectively waiting for the release, not the compression itself. This plays nicely with momentum entries and the slope gate.
How to combine:
If you want only the clean breaks, enable Slope + Squeeze; if you want structure but fewer chases, add CCI Dead Zone. You’ll filter out a lot of low-quality “wiggle” trades.
3) Time & Market Calendar
Sessions: Up to two session windows (America/Chicago by default), with background highlights.
Good-Till-Close (GTC): When ON, trades can close outside the session window; when OFF, all positions are flattened at session end and pending orders canceled.
Market-Day Filters: Skip US listed holidays and known non-full Globex days (e.g., Black Friday, certain eves). Cleaner logs and fewer backtest artifacts.
How to combine:
Run your A-setup window (e.g., cash open hour) with GTC ON if you want exits to obey system rules even after the window, or GTC OFF if you want the book flat at the bell, no exceptions.
Practical Profiles (mix-and-match presets)
Trend Rider: Primary MA gate ON, Slope filter ON, Secondary MA ON, Retracement ON (50%).
Goal: Only take momentum that’s already moving, buy the dip/sell the pop back into trend.
Structure-First Pullback: Primary MA gate ON, Secondary MA ON, CCI Dead Zone ON, Retracement 38–62%.
Goal: Filter extremes, use measured pullbacks for better R:R.
Break-Only Mode: Slope ON + Squeeze filter ON (avoid compression), Body filter ON with short lookback.
Goal: Only catch clean post-compression impulses.
Session Scalper: Tight session window, GTC OFF, Interval TP ON (small slices, short rungs), per-trade tick stop.
Goal: Quick hits in a well-defined window, always flat after.
Automation Notes
The system is built with intrabar awareness (calc_on_every_tick=true) and supports bracket-style behavior via pre-placed interval TP rungs. For webhook automation (e.g., TradersPost), keep chart(s) open and ensure alerts are tied to your order events or signal conditions as implemented in your alert templates. Always validate live routing with a small-size shakedown before scaling.
Tips, Caveats & Good Hygiene
Intrabar vs. Close: Backtests can fill intrabar where your broker might not. The pre-placed mode helps emulate OCO behavior but still depends on feed granularity.
Slippage & Fees: Set realistic slippage/commission in Strategy Properties to avoid fantasy equity curves.
Session Consistency: Use the correct timezone and verify that your broker’s session aligns with your chart session settings.
Don’t Over-stack Filters: More filters ≠ better performance. Start with trend gates, then add one volatility filter if needed.
Disclosure
This script is for educational purposes only and is not financial advice. Markets carry risk; only trade capital you can afford to lose. Test thoroughly on replay and paper before using any automated routing.
TL;DR
Identify a decisive candle → pass trend/vol filters → (optionally) pull back to a measured limit → scale out on pre-planned rungs → exit on Primary MA break or session rule. Clear, mechanical, repeatable.
Customizable Dashboard with Breakout, Fibonacci, and VMAPCustomizable Trading Dashboard 🚀
Supercharge your trading with our Customizable Dashboard with Breakout, Fibonacci, and VMAP! 📈 This powerful Pine Script indicator brings all key signals across multiple timeframes into one intuitive window, perfect for indices (Sensex, Nifty50, BankNifty), stocks, and crypto. Make faster, smarter decisions at a glance! 💡 Ideal for scalpers, day traders, and swing traders. 💪
Main Features 🌟
All Signals in One Window 🖼️: View trend, breakouts, Fibonacci, VMAP, and more in a single, customizable table—no need to switch charts! 🚀
Multi-Timeframe Powerhouse ⏰: Analyze signals across 1M, 5M, 15M, 30M, 1H, 4H, and 1D timeframes simultaneously for ultimate confluence. 📊
Trend Signals 📈: Spot Bullish 🟢, Bearish 🔴, or Neutral ⚪ trends instantly across all timeframes.
Breakout Detection 💥: Catch Consolidation, Pre-Breakout, Breakout, and Entry signals with higher timeframe confirmation.
Fibonacci Levels 🎯: Track key Fib levels (0.236, 0.382, 0.5, 0.618, 0.786) with persistent "last met" tracking for precision.
VMAP Insights 📏: See if price is At, Above, or Below the Volume-Weighted Moving Average for dynamic support/resistance.
Candlestick Patterns 🕯️: Identify powerful patterns like Bullish Engulfing, Hammer, and Doji across all timeframes.
Chart Patterns 🔍: Detect classics like Head and Shoulders, Triangles, and Flags in one view.
Fully Customizable 🎨: Toggle timeframes, signals, and simplified mode; tweak colors, headers, and settings to fit your trading style.
Dynamic Alerts 🔔: Get real-time notifications for trend shifts, breakouts, Fib touches, and more, all in one place.
Why Choose Our Dashboard? 🌍
One-Stop Analysis: Monitor all timeframes and signals in one window for faster, informed trades. 🖥️
Optimized for Nifty50, BankNifty, Sensex, stocks, and crypto. 🤑
Highly customizable for beginners and pros alike. 🛠️
Actionable insights with a sleek, color-coded table. ✨
Take control of the markets with this all-in-one trading powerhouse! Start now and trade smarter! 💸
Dynamic 50% Daily Range line + Checklist + WatermarkThis indicator is designed for traders who follow ICT (Inner Circle Trader) concepts. It provides key daily reference levels and session insights to improve market context analysis.
Features:
50% Line: Automatically plots the mid-level between the current day’s high and low. Customizable color, width, opacity, and dotted/solid style. Optional label to display the 50% level.
Market Open Line: Highlights the official market open with a vertical line. Fully customizable color, width, and opacity.
True Day Open Line: Marks the True Day Open (11 PM CST) for better session context. Customizable line color, width, and style.
Watermark: Optional motivational text displayed on the chart. Fully customizable text, size, and color.
Confluence Checklist: Track key trading confluences (Premium/Discount, Major Liquidity Sweep, Good Reaction, Inside Killzone, Good Momentum, Clear DOL, SMT, HTF Gap) to assist in decision-making. Size and position of the checklist are configurable.
Use Case:
Ideal for ICT-style trading, swing and intraday analysis, and anyone who wants clear daily reference levels and session markers without cluttering the chart with unnecessary text.
Oro Zone Statiche-M5/M15/M30 📌 Titolo
Oro Zone Confirmed Breakout
📝 Descrizione
Questo indicatore individua in automatico le zone operative di 5$ su XAU/USD (oro) e costruisce un box di validazione attorno al livello.
🔎 Funzionamento:
* Ogni livello multiplo di 5$ (1930, 1935, 1940, …) viene racchiuso da un box di ±0.5$.
* Prima candela che chiude col corpo fuori → bordo del box diventa giallo.
* Seconda candela consecutiva che chiude fuori → il box si illumina, compare il ✅ di conferma, e vengono generati automaticamente i target.
🎯 Regole operative:
* Stop Loss (SL): 2$ sotto (long) o sopra (short) il livello centrale.
* Take Profit 1 (TP1): 3$ sopra (long) o sotto (short).
* Take Profit 2 (TP2): 5$ sopra (long) o sotto (short).
* Quando viene colpito SL o TP2, il setup si chiude e il sistema valuta automaticamente il prossimo livello a +5$.
⚙️ Impostazioni:
* Funziona su più timeframe (consigliati 5m, 15m, 30m).
* Puoi attivare o disattivare la visualizzazione della cronologia dei box.
* Le linee di SL/TP sono fisse e accompagnate da etichette chiare.
📌 Title
Oro Zone Confirmed Breakout
📝 Description
This indicator automatically identifies the operational zones of $5 on XAU/USD (gold) and builds a validation box around the level.
🔎 Operation:
* Each multiple level of $5 (1930, 1935, 1940, ...) is enclosed by a box of ±0.5$.
* First candle that closes with the body out → edge of the box turns yellow.
* Second consecutive candle that closes out → the box lights up, the confirmation ✅ appears, and the targets are automatically generated.
🎯 Operating rules:
* Stop Loss (SL): $2 below (long) or above (short) the central level.
* Take Profit 1 (TP1): $3 above (long) or below (short).
* Take Profit 2 (TP2): $5 above (long) or below (short).
* When SL or TP2 is hit, the setup closes and the system automatically evaluates the next level at +5$.
⚙️ Settings:
* Works on multiple timeframes (5m, 15m, 30m recommended).
* You can turn box history display on or off.
* SL/TP lines are fixed and accompanied by clear labels.
TradeX Universal Algo For All📌 TradeX Universal Algo For All
The TradeX Universal Algo is a powerful, easy-to-use trend-following system that works on all markets and timeframes (Forex, Gold, Crypto, Stocks, Indices).
This algo is built on an ATR-based trailing stop system that dynamically adapts to volatility, giving you clear Buy/Sell signals with minimal noise.
🔑 Key Features
ATR Trailing Stop → Automatically adjusts to market volatility.
Buy & Sell Signals → Plots “Buy Above” and “Sell Below” labels when price crosses the trailing stop.
Bar Coloring → Green bars in bullish trend, red bars in bearish trend.
Custom Sensitivity → Adjust “Key Value” to fine-tune signal frequency.
Multi-Market Compatible → Works seamlessly on Forex, Commodities (XAUUSD, USOIL), Crypto, Indices, and Stocks.
Alerts Ready → Set alerts for Buy/Sell conditions so you never miss an opportunity.
⚙️ Inputs
Key Value (Sensitivity) → Controls how reactive the trailing stop is (default = 3).
ATR Period → Number of bars for ATR calculation (default = 5).
📊 How to Use
Apply the indicator on any chart and timeframe.
Look for Buy Above / Sell Below signals.
Follow the green bars for bullish bias and red bars for bearish bias.
Combine with your own analysis (Price Action, SMC, Supply/Demand, etc.) for best results.
⚠️ Disclaimer: This script is for educational purposes only. Trading involves risk, and past performance does not guarantee future results. Always use proper risk management.
AI-Powered Market and Fast Trend AnalysisAI-Powered Market and Fast Trend Analysis Presentation V7
Hello,
This presentation explains the core features and functionality of your "AI-Powered Market and Fast Trend Analysis" Pine Script indicator used on the TradingView platform.
1. General Overview
This indicator combines various technical analysis indicators and an AI-based decision-making mechanism to analyze market trends, volatility, volume movements, and potential reversal points. Its purpose is to provide users with a comprehensive and quick overview to make more informed buy/sell decisions.
2. General Settings and Periods
The indicator offers several input parameters to customize the analysis:
General Settings: Allows you to adjust the calculation periods for core indicators such as Period (General), TTM Period, Stoch %K/%D Period, Keltner Channel Multiplier, Volume Oscillator Fast/Slow Period.
3. AI Decision Weights
The AI decision mechanism, which is the heart of the indicator, generates a final AI score by assigning weights to different category scores:
Trend Indicators Weight: The impact of trend indicators such as Supertrend, TTM Squeeze, QQE, Vortex, RSI, Stochastic, Moving Averages (SMA, EMA, WMA, VWMA), MACD, Ichimoku Kijun, TEMA, HMA on the final score.
Momentum Indicators Weight: The impact of momentum indicators on the final score.
Volatility Indicators Weight: The impact of volatility indicators such as Bollinger Band Width, ATR, Keltner Channel Width, Donchian Channel Width, NATR.
Volume Indicators Weight: The impact of volume indicators such as OBV, AD, CMF, MFI, Volume Oscillator, VPT, VWAP.
Candlestick Pattern Weight (New): The impact of candlestick patterns like Doji, Bullish/Bearish Engulfing, Hammer, Shooting Star on the AI decision.
Reversal Momentum Weight (New): The impact of sudden price movements and reversal signals on the AI decision.
Market Context Weight: Determines how the general market sentiment from BIST indices (XU100, XU030, XBANK), in addition to the traded symbol's data, influences the AI decision. This weight controls how much the symbol's own data versus index data affects the AI decision.
4. AI Decision Thresholds
The AI score is converted into buy/sell signals based on specific threshold values, and the strength of the score is qualified:
AI Buy/Sell Thresholds: Separate buy and sell thresholds are defined for different asset classes like BIST stocks and Gold/MGC1.
Score Qualification Thresholds (New): The strength of the AI score is determined by levels such as Very Strong Buy/Sell, Strong Buy/Sell, Moderate Buy/Sell, Weak Buy/Sell.
Category-Based Signal Thresholds: Separate buy/sell thresholds exist for each category like trend, volatility, and volume.
5. Market Context Integration
The indicator analyzes not only the data of the traded symbol but also the data from BIST indices (XU100, XU030, XBANK) to incorporate general market sentiment into the AI decision. This provides a more holistic and reliable analysis.
6. Target Point Calculations
The indicator calculates potential buy and sell targets using ATR (Average True Range) multipliers. These targets are shown separately for different timeframes (30 Min, 1 Hour, 4 Hour, 1 Day, 1 Week) and are also marked on the chart. Additionally, Nearest Buy/Sell and Farthest Buy/Sell targets are determined from all timeframes.
7. Candlestick Patterns and Coloring
Pattern Detection: Automatically detects and marks important candlestick patterns such as Doji, Bullish Engulfing, Bearish Engulfing, Hammer, and Shooting Star on the chart.
Candlestick Coloring: Candlesticks are dynamically colored based on detected patterns and volume inflow. For example, in a Bullish Engulfing pattern, the candlestick turns solid green, while candlesticks with volume inflow are shown in white.
Fake Rally Indicator (New): Generates a "Fake Rally" signal when the overall AI score is still in a bearish zone, but there are bullish candlesticks and weak reversal signals.
8. Overbought/Oversold and Indecision Zones
On the chart, Overbought, Oversold, and Indecision zones are visually marked based on price movements within a specific period. These zones help you understand whether the price is near potential reversal points.
9. Panel Information (Top Right Corner)
The information panel located in the top right corner of the chart summarizes all important analysis results:
AI Decision: The general AI signal (Very Strong Buy/Sell, Strong Buy/Sell, etc.) and its color.
Score: The final AI score and its color (green, yellow, red).
Direction: The general market direction determined by AI (UP, DOWN, SIDEWAYS).
Category Signal: The combined signal of trend, volatility, and volume categories.
Confirmation Signal (New): The overall confidence level generated by combining the final AI score and the category signal (DEFINITE BUY/SELL, VERY STRONG, STRONG, MODERATE, WEAK, UNCERTAIN).
Timeframe-Based Status: Trend, Volatility, and Volume statuses for 30 Min, 1 Hour, 4 Hour, 1 Day, and 1 Week timeframes (Uptrend/Downtrend/Neutral, Inflow/Outflow/Neutral).
Candlestick Pattern: The detected candlestick pattern in the active timeframe.
Market Index Score: The average AI score of BIST indices.
Buyer/Seller Power (New): The percentage distribution of buyer and seller power in the current candlestick.
Target Buy/Sell: Potential buy and sell targets calculated for each timeframe.
Nearest/Farthest Buy/Sell (New): The nearest and farthest buy/sell points determined from targets across all timeframes.
10. How It Helps
This indicator helps you make sense of complex market data and assists you with:
Quick Decision Making: Allows you to quickly see the overall market situation and potential buy/sell signals at a glance.
Trend Identification: Helps you understand trends across different timeframes and their strength.
Risk Management: Supports your risk management strategies with target points and volatility analyses.
Market Sentiment: Enables you to make more accurate decisions by considering the general market context through index integration.
Important Note: When using the indicator for buy/sell decisions, please consider removing the "Overall AI Score" line and the "Buy/Sell Threshold" lines from the chart for a cleaner full-screen view.
I hope this presentation helps you better understand your code and proves useful in your TradingView operations.
Sincerely,
17 Tem
Sürüm Notları
VERSİON V9
Fixed Asset TurnoverFixed Asset Turnover (FAT) measures how efficiently a company uses its fixed assets (Property, Plant & Equipment – PPE) to generate revenue. It shows how many times the company “turns over” its fixed assets in a period relative to revenue.
High FAT: Assets are used efficiently; the company generates more revenue per unit of fixed assets.
Low FAT: Fixed assets are underutilized; the company may have invested too much in assets that don’t produce sufficient revenue.
Formula:
Fixed Asset Turnover=Total Revenue/Average Net Fixed Assets
What it tells you:
Indicates asset efficiency in generating sales.
Useful to compare companies within the same industry (because asset intensity varies by sector).
Helps identify whether a company is over-invested in fixed assets or underutilizing them.
How to use it:
Trend Analysis:
Track FAT over time for the same company to see if asset utilization is improving.
Benchmarking:
Compare FAT against competitors or industry averages.
Investment Decisions:
Higher FAT usually suggests more efficient operations, but context matters (e.g., heavy-capital industries naturally have lower FAT).
