Asset Tournament

7 de out. de 2024

Credits to InvestorUnknown (I optimized this indicator based off his Universal Ratio Trend Matrix)

The Asset Tournament is designed for trend analysis on asset/asset ratios, supporting up to 40 different assets. Its primary purpose is to help identify which assets are outperforming others within a selection, providing a broad overview of market trends through a matrix of ratios. The RSI indicator automatically expands the table based on the number of assets chosen, simplifying the process of comparing multiple assets in terms of performance.

Key features include the ability to choose from a selection of three different RSI types to perform the ratio trend analysis, allowing users to apply well-defined metrics to their comparison.

Drawback: Due to the computational intensity involved in calculating ratios across many assets, the indicator has a limitation related to loading speed. TradingView has time limits for calculations, and for users on the basic (free) plan, this could result in frequent errors due to exceeded time limits. To use the indicator effectively, users with any paid plans should run it on timeframes higher than 8h (the lowest timeframe on which it managed to load with 40 assets), as lower timeframes may not reliably load.

Indicators:

• RSI (Raw): Calculates the Relative Strength Index (RSI) of a source (asset price).
  
• RSI (SMA): Calculates RSI followed by a Simple Moving Average (SMA).
  
• RSI (EMA): Calculates RSI followed by an Exponential Moving Average (EMA).
  

Utility Functions:

• f_remove_unwanted_character: Strips the unwanted characters of a ticker and the exchange name as well (e.g., "INDEX:BTCUSD" to "BTC").
  

  // Function to remove unwanted characters from tickers
  f_remove_unwanted_character(ticker) =>
      // Remove exchange name
      string[] parts = str.split(ticker, ":")
      string result = array.size(parts) > 1 ? array.get(parts, 1) : ticker
      // Remove everything after "SOL" or "WETH"
      result := str.contains(result, "SOL_")  ? array.get(str.split(result, "SOL_") , 0) : result
      result := str.contains(result, "WETH_") ? array.get(str.split(result, "WETH_"), 0) : result
      result := str.contains(result, "USD")  ? array.get(str.split(result, "USD") , 0) : result
      result := str.contains(result, "1")    ? array.get(str.split(result, "1")   , 0) : result
      result := str.contains(result, "2")    ? array.get(str.split(result, "2")   , 0) : result
      result := str.contains(result, "3")    ? array.get(str.split(result, "3")   , 0) : result
      result := str.contains(result, "4")    ? array.get(str.split(result, "4")   , 0) : result
      result := str.contains(result, "5")    ? array.get(str.split(result, "5")   , 0) : result
      result := str.contains(result, "6")    ? array.get(str.split(result, "6")   , 0) : result
      result := str.contains(result, "7")    ? array.get(str.split(result, "7")   , 0) : result
      result := str.contains(result, "8")    ? array.get(str.split(result, "8")   , 0) : result
      result := str.contains(result, "9")    ? array.get(str.split(result, "9")   , 0) : result
      result := str.contains(result, "0")    ? array.get(str.split(result, "0")   , 0) : result    
      // Trim the final string to remove any extra spaces
      finalName = str.trim(result)  
      finalName

• f_get_price: Retrieves the closing price of a given asset ticker using request.security().
  
• f_constant_src: Checks if the source data is constant by comparing multiple consecutive values.
  

Inputs:

• General settings allow users to select the number of tickers for analysis (used_assets) and choose the between three different RSI indicator types (RSI (Raw), RSI (SMA), RSI (EMA)).
  
• Table settings customize how trend scores are displayed in terms of text size, header visibility, highlighting options, and top-performing asset identification.
  
• The script includes inputs for up to 40 assets, allowing the user to select various cryptocurrencies (e.g., RETARDIO, FWOG, GIGA) or other assets for trend analysis.
  

Price Arrays:

• Price values for each asset are stored in variables (price_a1 to price_a40) initialized as na. These prices are updated only for the number of assets specified by the user (used_assets).
  
• Trend scores for each asset are stored in separate arrays.
  

// Price variables declared as na
var float price_a1  = na,   var float price_a2  = na,   var float price_a3  = na,   var float price_a4  = na,   var float price_a5  = na
var float price_a6  = na,   var float price_a7  = na,   var float price_a8  = na,   var float price_a9  = na,   var float price_a10 = na
var float price_a11 = na,   var float price_a12 = na,   var float price_a13 = na,   var float price_a14 = na,   var float price_a15 = na
var float price_a16 = na,   var float price_a17 = na,   var float price_a18 = na,   var float price_a19 = na,   var float price_a20 = na
var float price_a21 = na,   var float price_a22 = na,   var float price_a23 = na,   var float price_a24 = na,   var float price_a25 = na
var float price_a26 = na,   var float price_a27 = na,   var float price_a28 = na,   var float price_a29 = na,   var float price_a30 = na
var float price_a31 = na,   var float price_a32 = na,   var float price_a33 = na,   var float price_a34 = na,   var float price_a35 = na
var float price_a36 = na,   var float price_a37 = na,   var float price_a38 = na,   var float price_a39 = na,   var float price_a40 = na
// Stored trend scores on "empty" arrays
var a1_array  = array.new_int(40, 0),      var a2_array  = array.new_int(40, 0),    var a3_array  = array.new_int(40, 0),      var a4_array  = array.new_int(40, 0)
var a5_array  = array.new_int(40, 0),      var a6_array  = array.new_int(40, 0),    var a7_array  = array.new_int(40, 0),      var a8_array  = array.new_int(40, 0)
var a9_array  = array.new_int(40, 0),      var a10_array = array.new_int(40, 0),    var a11_array = array.new_int(40, 0),      var a12_array = array.new_int(40, 0)
var a13_array = array.new_int(40, 0),      var a14_array = array.new_int(40, 0),    var a15_array = array.new_int(40, 0),      var a16_array = array.new_int(40, 0)
var a17_array = array.new_int(40, 0),      var a18_array = array.new_int(40, 0),    var a19_array = array.new_int(40, 0),      var a20_array = array.new_int(40, 0)
var a21_array = array.new_int(40, 0),      var a22_array = array.new_int(40, 0),    var a23_array = array.new_int(40, 0),      var a24_array = array.new_int(40, 0)
var a25_array = array.new_int(40, 0),      var a26_array = array.new_int(40, 0),    var a27_array = array.new_int(40, 0),      var a28_array = array.new_int(40, 0)
var a29_array = array.new_int(40, 0),      var a30_array = array.new_int(40, 0),    var a31_array = array.new_int(40, 0),      var a32_array = array.new_int(40, 0)
var a33_array = array.new_int(40, 0),      var a34_array = array.new_int(40, 0),    var a35_array = array.new_int(40, 0),      var a36_array = array.new_int(40, 0)
var a37_array = array.new_int(40, 0),      var a38_array = array.new_int(40, 0),    var a39_array = array.new_int(40, 0),      var a40_array = array.new_int(40, 0)
// Used asset prices
f_get_asset_price(asset_number, ticker) =>
    if (used_assets >= asset_number)
        f_get_price(ticker)
    else
        na
// If "used_assets" is greater or equal to the asset number, the empty variables with the prices are overwriten
if barstate.isconfirmed
    price_a1  := f_get_asset_price(1,  asset1),   price_a2  := f_get_asset_price(2,  asset2),   price_a3  := f_get_asset_price(3,  asset3),   price_a4  := f_get_asset_price(4,  asset4)
    price_a5  := f_get_asset_price(5,  asset5),   price_a6  := f_get_asset_price(6,  asset6),   price_a7  := f_get_asset_price(7,  asset7),   price_a8  := f_get_asset_price(8,  asset8)
    price_a9  := f_get_asset_price(9,  asset9),   price_a10 := f_get_asset_price(10, asset10),  price_a11 := f_get_asset_price(11, asset11),  price_a12 := f_get_asset_price(12, asset12)
    price_a13 := f_get_asset_price(13, asset13),  price_a14 := f_get_asset_price(14, asset14),  price_a15 := f_get_asset_price(15, asset15),  price_a16 := f_get_asset_price(16, asset16)
    price_a17 := f_get_asset_price(17, asset17),  price_a18 := f_get_asset_price(18, asset18),  price_a19 := f_get_asset_price(19, asset19),  price_a20 := f_get_asset_price(20, asset20)
    price_a21 := f_get_asset_price(21, asset21),  price_a22 := f_get_asset_price(22, asset22),  price_a23 := f_get_asset_price(23, asset23),  price_a24 := f_get_asset_price(24, asset24)
    price_a25 := f_get_asset_price(25, asset25),  price_a26 := f_get_asset_price(26, asset26),  price_a27 := f_get_asset_price(27, asset27),  price_a28 := f_get_asset_price(28, asset28)
    price_a29 := f_get_asset_price(29, asset29),  price_a30 := f_get_asset_price(30, asset30),  price_a31 := f_get_asset_price(31, asset31),  price_a32 := f_get_asset_price(32, asset32)
    price_a33 := f_get_asset_price(33, asset33),  price_a34 := f_get_asset_price(34, asset34),  price_a35 := f_get_asset_price(35, asset35),  price_a36 := f_get_asset_price(36, asset36)
    price_a37 := f_get_asset_price(37, asset37),  price_a38 := f_get_asset_price(38, asset38),  price_a39 := f_get_asset_price(39, asset39),  price_a40 := f_get_asset_price(40, asset40)

RSI Indicator Calculation (f_calc_score):

• This function allows switching between three different types of RSI indicators (RSI (RAW), RSI (SMA), RSI (EMA)) for flexibility.
  
• It uses a switch-case structure to calculate the indicator score, where a positive trend is denoted by 1 and a negative trend by 0. Each indicator has its own logic to determine whether the asset is trending up or down.
  

// The different RSI indicators
f_calc_score(source, trend_indicator, int_1, int_2) =>
    int score = na
    if (not f_constant_src(source)) and source > 0.0 // Skip if you are using the same assets for ratio (for example BTC/BTC)
        x = switch trend_indicator
            "RSI (Raw)" => RSI_raw(source, int_1)
            "RSI (SMA)" => RSI_sma(source, int_1, int_2)
            "RSI (EMA)" => RSI_ema(source, int_1, int_2)
        y = switch trend_indicator
            "RSI (Raw)" => x > 50 ? 1 : 0
            "RSI (SMA)" => x > 50 ? 1 : 0
            "RSI (EMA)" => x > 50 ? 1 : 0
        score := y
    else
        score := 0
    score

Array Setting Function (f_array_set):

• This function populates an array with scores calculated for each asset based on a base price (p_base) divided by the prices of the individual assets.
  
• It processes multiple assets (up to 40), calling the f_calc_score function for each.
  

// Function to set values into the arrays
f_array_set(a_array, p_base) =>
    array.set(a_array,  0, f_calc_score(p_base / price_a1,  trend_indicator, int_1, int_2))
    array.set(a_array,  1, f_calc_score(p_base / price_a2,  trend_indicator, int_1, int_2))
    array.set(a_array,  2, f_calc_score(p_base / price_a3,  trend_indicator, int_1, int_2))
    array.set(a_array,  3, f_calc_score(p_base / price_a4,  trend_indicator, int_1, int_2))
    array.set(a_array,  4, f_calc_score(p_base / price_a5,  trend_indicator, int_1, int_2))
    array.set(a_array,  5, f_calc_score(p_base / price_a6,  trend_indicator, int_1, int_2))
    array.set(a_array,  6, f_calc_score(p_base / price_a7,  trend_indicator, int_1, int_2))
    array.set(a_array,  7, f_calc_score(p_base / price_a8,  trend_indicator, int_1, int_2))
    array.set(a_array,  8, f_calc_score(p_base / price_a9,  trend_indicator, int_1, int_2))
    array.set(a_array,  9, f_calc_score(p_base / price_a10, trend_indicator, int_1, int_2))
    array.set(a_array, 10, f_calc_score(p_base / price_a11, trend_indicator, int_1, int_2))
    array.set(a_array, 11, f_calc_score(p_base / price_a12, trend_indicator, int_1, int_2))
    array.set(a_array, 12, f_calc_score(p_base / price_a13, trend_indicator, int_1, int_2))
    array.set(a_array, 13, f_calc_score(p_base / price_a14, trend_indicator, int_1, int_2))
    array.set(a_array, 14, f_calc_score(p_base / price_a15, trend_indicator, int_1, int_2))
    array.set(a_array, 15, f_calc_score(p_base / price_a16, trend_indicator, int_1, int_2))
    array.set(a_array, 16, f_calc_score(p_base / price_a17, trend_indicator, int_1, int_2))
    array.set(a_array, 17, f_calc_score(p_base / price_a18, trend_indicator, int_1, int_2))
    array.set(a_array, 18, f_calc_score(p_base / price_a19, trend_indicator, int_1, int_2))
    array.set(a_array, 19, f_calc_score(p_base / price_a20, trend_indicator, int_1, int_2))
    array.set(a_array, 20, f_calc_score(p_base / price_a21, trend_indicator, int_1, int_2))
    array.set(a_array, 21, f_calc_score(p_base / price_a22, trend_indicator, int_1, int_2))
    array.set(a_array, 22, f_calc_score(p_base / price_a23, trend_indicator, int_1, int_2))
    array.set(a_array, 23, f_calc_score(p_base / price_a24, trend_indicator, int_1, int_2))
    array.set(a_array, 24, f_calc_score(p_base / price_a25, trend_indicator, int_1, int_2))
    array.set(a_array, 25, f_calc_score(p_base / price_a26, trend_indicator, int_1, int_2))
    array.set(a_array, 26, f_calc_score(p_base / price_a27, trend_indicator, int_1, int_2))
    array.set(a_array, 27, f_calc_score(p_base / price_a28, trend_indicator, int_1, int_2))
    array.set(a_array, 28, f_calc_score(p_base / price_a29, trend_indicator, int_1, int_2))
    array.set(a_array, 29, f_calc_score(p_base / price_a30, trend_indicator, int_1, int_2))
    array.set(a_array, 30, f_calc_score(p_base / price_a31, trend_indicator, int_1, int_2))
    array.set(a_array, 31, f_calc_score(p_base / price_a32, trend_indicator, int_1, int_2))
    array.set(a_array, 32, f_calc_score(p_base / price_a33, trend_indicator, int_1, int_2))
    array.set(a_array, 33, f_calc_score(p_base / price_a34, trend_indicator, int_1, int_2))
    array.set(a_array, 34, f_calc_score(p_base / price_a35, trend_indicator, int_1, int_2))
    array.set(a_array, 35, f_calc_score(p_base / price_a36, trend_indicator, int_1, int_2))
    array.set(a_array, 36, f_calc_score(p_base / price_a37, trend_indicator, int_1, int_2))
    array.set(a_array, 37, f_calc_score(p_base / price_a38, trend_indicator, int_1, int_2))
    array.set(a_array, 38, f_calc_score(p_base / price_a39, trend_indicator, int_1, int_2))
    array.set(a_array, 39, f_calc_score(p_base / price_a40, trend_indicator, int_1, int_2))
    a_array

Conditional Array Setting (f_arrayset):

• This function checks if the number of used assets is greater than or equal to a specified number before populating the arrays.
  

// Only used assets set values into arrays 
f_arrayset(asset_number, a_array, p_base) =>
    if (used_assets >= asset_number)
        f_array_set(a_array, p_base)
    else
        na

Main Logic

• The main logic initializes arrays to store scores for each asset. Each array corresponds to one asset's performance score.
  
• Setting Trend Values: The code calls f_arrayset for each asset, populating the respective arrays with calculated scores based on the asset prices.
  
• Combining Arrays: A combined_array is created to hold all the scores from individual asset arrays. This array facilitates further analysis, allowing for an overview of the performance scores of all assets at once.
  

// Combined array
var combined_array = array.new_int(40 * 40, 0)
if barstate.islast
    for i = 0 to 39
        array.set(combined_array, i,             array.get(a1_array,  i))
        array.set(combined_array, i + (40 * 1),  array.get(a2_array,  i))
        array.set(combined_array, i + (40 * 2),  array.get(a3_array,  i))
        array.set(combined_array, i + (40 * 3),  array.get(a4_array,  i))
        array.set(combined_array, i + (40 * 4),  array.get(a5_array,  i))
        array.set(combined_array, i + (40 * 5),  array.get(a6_array,  i))
        array.set(combined_array, i + (40 * 6),  array.get(a7_array,  i))
        array.set(combined_array, i + (40 * 7),  array.get(a8_array,  i))
        array.set(combined_array, i + (40 * 8),  array.get(a9_array,  i))
        array.set(combined_array, i + (40 * 9),  array.get(a10_array, i))
        array.set(combined_array, i + (40 * 10), array.get(a11_array, i))
        array.set(combined_array, i + (40 * 11), array.get(a12_array, i))
        array.set(combined_array, i + (40 * 12), array.get(a13_array, i))
        array.set(combined_array, i + (40 * 13), array.get(a14_array, i))
        array.set(combined_array, i + (40 * 14), array.get(a15_array, i))
        array.set(combined_array, i + (40 * 15), array.get(a16_array, i))
        array.set(combined_array, i + (40 * 16), array.get(a17_array, i))
        array.set(combined_array, i + (40 * 17), array.get(a18_array, i))
        array.set(combined_array, i + (40 * 18), array.get(a19_array, i))
        array.set(combined_array, i + (40 * 19), array.get(a20_array, i))
        array.set(combined_array, i + (40 * 20), array.get(a21_array, i))
        array.set(combined_array, i + (40 * 21), array.get(a22_array, i))
        array.set(combined_array, i + (40 * 22), array.get(a23_array, i))
        array.set(combined_array, i + (40 * 23), array.get(a24_array, i))
        array.set(combined_array, i + (40 * 24), array.get(a25_array, i))
        array.set(combined_array, i + (40 * 25), array.get(a26_array, i))
        array.set(combined_array, i + (40 * 26), array.get(a27_array, i))
        array.set(combined_array, i + (40 * 27), array.get(a28_array, i))
        array.set(combined_array, i + (40 * 28), array.get(a29_array, i))
        array.set(combined_array, i + (40 * 29), array.get(a30_array, i))
        array.set(combined_array, i + (40 * 30), array.get(a31_array, i))
        array.set(combined_array, i + (40 * 31), array.get(a32_array, i))
        array.set(combined_array, i + (40 * 32), array.get(a33_array, i))
        array.set(combined_array, i + (40 * 33), array.get(a34_array, i))
        array.set(combined_array, i + (40 * 34), array.get(a35_array, i))
        array.set(combined_array, i + (40 * 35), array.get(a36_array, i))
        array.set(combined_array, i + (40 * 36), array.get(a37_array, i))
        array.set(combined_array, i + (40 * 37), array.get(a38_array, i))
        array.set(combined_array, i + (40 * 38), array.get(a39_array, i))
        array.set(combined_array, i + (40 * 39), array.get(a40_array, i))

• Calculating Sums: A separate array_sums is created to store the total score for each asset by summing the values of their respective score arrays. This allows for easy comparison of overall performance.
  
• Ranking Assets: The final part of the code ranks the assets based on their total scores stored in array_sums. It assigns a rank to each asset, where the asset with the highest score receives the highest rank.
  

// Array for asset rank
var ranks = array.new_int(used_assets, 0)
// Asset rank calculation
if barstate.islast
    for i = 0 to (used_assets - 1)
        int rank = 1
        for x = 0 to (used_assets - 1)
            if i != x
                if array.get(array_sums, i) < array.get(array_sums, x)
                    rank := rank + 1
        array.set(ranks, i, rank)

Dynamic Table Creation

• Initialization: The table is initialized with a base structure that includes headers for asset names, scores, and ranks. The headers are set to remain constant, ensuring clarity for users as they interpret the displayed data.
  
• Data Population: As scores are calculated for each asset, the corresponding values are dynamically inserted into the table. This is achieved through a loop that iterates over the scores and ranks stored in the combined_array and array_sums, respectively.
  

Automatic Extending Mechanism

• Variable Asset Count: The code checks the number of assets defined by the user. Instead of hardcoding the number of rows in the table, it uses a variable to determine the extent of the data that needs to be displayed. This allows the table to expand or contract based on the number of assets being analyzed.
  
• Dynamic Row Generation: Within the loop that populates the table, the code appends new rows for each asset based on the current asset count. The structure of each row includes the asset name, its score, and its rank, ensuring that the table remains consistent regardless of how many assets are involved.
  

var table myTable = na
if layout_choice == "Horizontal"
    myTable := table.new(position.middle_center, 50, max_assets_to_display + 2, color.new(color.black, 100), color.white, 3, color.white, 1)
else
    myTable := table.new(position.bottom_center, 50, 50, color.new(color.black, 100), color.white, 3, color.white, 1)
if barstate.islast
    if not hide_head
        table.cell(myTable, 0, 0, "Tournament", text_color = color.white, bgcolor = #010c3b, text_size = fontSize)
        if layout_choice == "Horizontal"
            table.merge_cells(myTable, 0, 0, max_assets_to_display, 0)  // Adjust for Horizontal format
        else
            // Adjust for Vertical format based on show_sum
            if show_sum
                table.merge_cells(myTable, 0, 0, 2, 0)  // Merges two columns if SUM is shown
            else
                table.merge_cells(myTable, 0, 0, 1, 0)  // Merges one column if SUM is not shown
    // Create an array of indices based on ranks
    var int[] sorted_indices = na
    if na(sorted_indices)
        sorted_indices := array.new_int(used_assets)
    // Populate sorted_indices with indices 0 to used_assets - 1
    for i = 0 to used_assets - 1
        array.set(sorted_indices, i, i)
    // Bubble sort algorithm to sort indices based on ranks
    for i = 0 to array.size(sorted_indices) - 2
        for j = 0 to array.size(sorted_indices) - 2 - i
            // Compare ranks using the sorted_indices array
            if (sort_order == "Descending" and array.get(ranks, array.get(sorted_indices, j)) > array.get(ranks, array.get(sorted_indices, j + 1))) or
               (sort_order == "Ascending" and array.get(ranks, array.get(sorted_indices, j)) < array.get(ranks, array.get(sorted_indices, j + 1)))
                // Swap indices
                temp = array.get(sorted_indices, j)
                array.set(sorted_indices, j, array.get(sorted_indices, j + 1))
                array.set(sorted_indices, j + 1, temp)
    // Fill the table based on the chosen layout
    if layout_choice == "Horizontal"
        // Column headers
        table.cell(myTable, 0, 1, "ASSETS", text_color = color.white, text_size = fontSize, bgcolor = #010c3b)        
        // Conditional header for SUM
        if show_sum
            table.cell(myTable, 0, 2, "SUM", text_color = color.white, text_size = fontSize, bgcolor = #010c3b)
        table.cell(myTable, 0, show_sum ? 3 : 2, "RANK", text_color = color.white, text_size = fontSize, bgcolor = #010c3b)
        // Assets on the top (limit to max_assets_to_display)
        for x = 0 to math.min(used_assets - 1, max_assets_to_display - 1)
            idx = array.get(sorted_indices, x) // Get the index of the asset based on sorted order
            table.cell(myTable, x + 1, 1, text = str.tostring(array.get(assets, idx)), text_color = color.white, bgcolor = f_asset_col(array.get(ranks, idx)), text_size = fontSize)        
        // SUM and RANK values for each asset (limit to max_assets_to_display)
        for x = 0 to math.min(used_assets - 1, max_assets_to_display - 1)
            idx = array.get(sorted_indices, x) // Get the index of the asset based on sorted order
            if show_sum
                table.cell(myTable, x + 1, 2, text = str.tostring(array.get(array_sums, idx)), text_color = color.white, text_size = fontSize, bgcolor = f_highlight_sum(array.get(array_sums, idx), array.get(ranks, idx)))
            table.cell(myTable, x + 1, show_sum ? 3 : 2, text = str.tostring(array.get(ranks, idx)), text_color = color.white, text_size = fontSize, bgcolor = f_highlight_rank(array.get(ranks, idx)))
    else
        // Fill Vertical table (limit to max_assets_to_display)
        for x = 0 to math.min(used_assets - 1, max_assets_to_display - 1)
            idx = array.get(sorted_indices, x) // Get the index of the asset based on sorted order
            table.cell(myTable, 0, x + 2, text = str.tostring(array.get(assets, idx)), text_color = color.white, bgcolor = f_asset_col(array.get(ranks, idx)), text_size = fontSize)
        table.cell(myTable, 0, 1, "ASSETS", text_color = color.white, text_size = fontSize, bgcolor = #010c3b)        
        // Conditional header for SUM
        if show_sum
            table.cell(myTable, 1, 1, "SUM", text_color = color.white, text_size = fontSize, bgcolor = #010c3b)
        table.cell(myTable, show_sum ? 2 : 1, 1, "RANK", text_color = color.white, text_size = fontSize, bgcolor = #010c3b)
        for x = 0 to math.min(used_assets - 1, max_assets_to_display - 1)
            idx = array.get(sorted_indices, x) // Get the index of the asset based on sorted order
            if show_sum
                table.cell(myTable, 1, x + 2, text = str.tostring(array.get(array_sums, idx)), text_color = color.white, text_size = fontSize, bgcolor = f_highlight_sum(array.get(array_sums, idx), array.get(ranks, idx)))
            table.cell(myTable, show_sum ? 2 : 1, x + 2, text = str.tostring(array.get(ranks, idx)), text_color = color.white, text_size = fontSize, bgcolor = f_highlight_rank(array.get(ranks, idx)))

17 de out. de 2024

Notas de Lançamento

Dynamic Table Layout: Users can now choose between horizontal and vertical table layouts, enhancing flexibility and user experience.

Conditional SUM Display: Added an option for users to toggle the display of the SUM of scores alongside ranks. This allows for a more customizable view based on user preference.

Top Assets Display: Implemented a feature that enables users to define a maximum number of assets to display in the table, automatically sorted from highest to lowest rank. This ensures that users can focus on the most relevant data.

Improved Data Population: Enhanced the logic for populating the table dynamically based on the number of assets defined by the user, ensuring the display adjusts automatically without hardcoded values.

User Input Options: Introduced new input options for layout selection, SUM visibility, and maximum assets to display, allowing for a more tailored experience.

18 de out. de 2024

Notas de Lançamento

Rank Sorting Preference: Users can now choose whether to sort ranks in ascending or descending order, giving full control over how the rank order is presented.

19 de out. de 2024

Notas de Lançamento

Addition of Removal Logic: The function now includes logic to remove everything after "SOL" or "WETH," along with "SOL" and "WETH" themselves, enhancing the cleaning process for the ticker variable.

Cleaner Appearance: The function now applies 'display = display.none' to various settings for a cleaner appearance of the indicator settings on the chart, which enhances the overall visual layout.

19 de out. de 2024

Notas de Lançamento

Error Correction: The function f_remove_unwanted_character, as per the previous update, didn't display both SOL and WETH. Now it displays both, whilst maintaining it's primary purpose.

20 de out. de 2024

Notas de Lançamento

Improved Settings: Added tooltips on different inputs.

20 de out. de 2024

Notas de Lançamento

Name Correction: From 'RSI Types' to 'RSI Type'

13 de nov. de 2024

Notas de Lançamento

New Colors: Updated the color scheme to be in accordance to the one used on the other published indicators.

18 de mai.

Notas de Lançamento

Minimal Changes