Começar

W-VWAP

Anchored VWAP (Auto High & Low)OVERVIEW This script plots, and auto-updates, 3 separate VWAPs: a traditional VWAP, a VWAP anchored to a trends high, and another anchored to a trends low. VWAP and Anchored VWAPs are commonly used by institutions responsible for the majority of market volume on a given day. Citadel Trading, for example, accounts for approximately 35% of all U.S. listed retail volume , largely executed through program trades over the course of a day, week, or month. Because VWAP is a prominent market maker tool for executing large trades, day traders can use it to better anticipate trends, mean reversion, and breakouts. This is most useful on charts with intraday time frames (1 minute, 5 minute etc.) commonly used for day trading. This is not ideal for larger time frames (1 hour or greater) commonly used for swing trading or identifying larger trends. INPUTS You can configure: The size, color, and visibility of 6 different plots (VWAP, High Anchor, Low Anchor, Average of Anchors, Quarter Values, Interim Bands) How smooth the average displays INSPIRATION 1. "How To Measure Anything" by Douglas W. Hubbard 2. "Maximum Trading Gains With Anchored VWAP" by Brian Shannon Better understanding probability and how to analyze risk (first book), as well as the tools market makers use (second book), has completely reframed how I approach day trading.
Indicador Pine Script®
por liquid-trader
71
VWAP Reset Zones With this indicator, the VWAP is displayed based on two adjustable sources. Close and Open are recommended by default. The zone between the Open and Close VWAP is carried over to the next day as the zone at the end of the period. The zones can be considered as support and resistance zones. The chart illustrates the idea behind it. In addition, the anchor function has been added so that anchor points can be set for session, week and month. Depending on the set anchor and the selected time unit of the chart, an adjustment of the indicator to the time unit can be made. Recommended time unit of the indicator: Session = 15 min / Weekly = 1H / Month = 4H In addition, the zones between VWAP close and vwap open have been colored. Bullish when the close is above the open price and bearish when the close is below the open price. The principle is simple. If the average closing price is below the average opening price, a downtrend is to be assumed and vice versa an uptrend.
Indicador Pine Script®
por Demech
5
Volatility Weighted Moving Average + Session Average linesHi Traders ! Just finished my Y2 university finals exams, and thought I would cook up a quick and hopefully useful script. VWAP + Session Average Lines : Volatility Weighted Average Price in the standard case is a trading indicator that measures the average trading price for the user defined period, usually a standard session (D timeframe), & is used by traders as a trend confirmation tool. This VWAP script allows for altering of the session to higher dimensions (D, W, M) or those of lower dimension (H4, or even H1 timeframes), furthermore this script allows the lookback of data to be switched from the standard session to a user defined amount of bars (e.g. the VWAP of 200 bars as opposed to the VWAP of a standard session which contains 95 bars in M15 timeframe for 24/7 traded assets e.g. BTCUSD), lastly this script plots Session VWAP Average Lines (if true in settings) so tradaes can gauge the area of highest liquidity within a session, this can be interpreted as the fair price within a session. If Average lines are increasing and decreasing consistently like a monotonic function this singles traders interest is at higher / lower prices respectively (Bullish / Bearish bias respectively ?), However if Average lines are centered around the same zones without any major fluctuations this signals a ranging market. VWAP calculation : VWAP is derived from the ratio of the assets value to total volume of transactions where value is the product of typical price (Average of high, low and close bars / candles) and corresponding bar volume, value can be thought of as the dollar value traded per bar. How is VWAP used by Institutions / Market movers : For some context and general information, VWAP is typically used by Market movers (e.g. Hedge funds, Mutual funds ,..., ...) in their trade execution, as trading at the VWAP equals the area of highest market volume, trading in line with the volume of the market reduces transaction costs by minimizing market impact (extra liquidity lowers spreads and lag time between order fills), this overall improves market efficiency. In my opinion the script is best used with its standard settings on the M15 timeframe, note as of now the script is not functional on certain timeframes, however this script is not intended to be used in these timeframes, i will try fix this code bug as soon as possible.
Indicador Pine Script®
por Amjad_S
3
Moving Averages + BB & R.VWAP StDev (multi-tf)█ Moving Averages + Bollinger Bands and Rolling Volume Weighted Average Price with Standard Deviation Bands (Multi Timeframe) Multiple moving averages can be independently applied. The length , type and timeframe of each moving average are configurable . The lines and colors are customizable too. This script can display: Moving Averages Bollinger Bands Rolling VWAP and Standard Deviation Bands Types of Moving Averages: Simple Moving Average (SMA) Exponential Moving Average (EMA) Smoothed Moving Average (SMMA) Weighted Moving Average (WMA) Volume Weighted Moving Average (VWMA) Least Squares Moving Average (LSMA) Hull Moving Average (HMA) Arnaud Legoux Moving Average (ALMA) █ Moving Average Moving Averages are price based, lagging (or reactive) indicators that display the average price of a security over a set period of time. A Moving Average is a good way to gauge momentum as well as to confirm trends, and define areas of support and resistance. █ Bollinger Bands Bollinger Bands consist of a band of three lines which are plotted in relation to security prices. The line in the middle is usually a Simple Moving Average (SMA) set to a period of 20 days (the type of trend line and period can be changed by the trader, a 20 day moving average is by far the most popular). The SMA then serves as a base for the Upper and Lower Bands which are used as a way to measure volatility by observing the relationship between the Bands and price. █ Rolling VWAP The typical VWAP is designed to be used on intraday charts, as it resets at the beginning of the day. Such VWAPs cannot be used on daily, weekly or monthly charts. Instead, this rolling VWAP uses a time period that automatically adjusts to the chart's timeframe. You can thus use the rolling VWAP on any chart that includes ​volume information in its data feed. Because the rolling VWAP uses a moving window, it does not exhibit the jumpiness of VWAP plots that reset. Based on the previous script :
Indicador Pine Script®
por Yatagarasu_
3
VWAP Open Session Anchored by HampehThe VWAP Open Session Anchored indicator differs from traditional VWAP indicators by automatically anchoring the Volume Weighted Average Price calculation to three market session starts Morning, Evening, and Night. Each session represents a distinct time period within the trading day, offering traders and investors a more comprehensive view of the volume-weighted average price within specific sessions. What Is the Volume-Weighted Average Price (VWAP)? The volume-weighted average price (VWAP) is a technical analysis indicator used on intraday charts that resets at the start of every new trading session. VWAP is important because it provides traders with pricing insight into both the trend and value of a security. KEY TAKEAWAYS 1. The volume-weighted average price (VWAP) is a single line on intraday charts. 2. It looks similar to a moving average line but smoother. 3. VWAP represents a view of price action throughout a single day's trading session. 4. Retail and professional traders may use the VWAP to help them determine intraday price trends. 5. VWAP typically is most useful to short-term traders. VWAP is calculated by totaling the dollars traded for every transaction (price multiplied by the volume) and then dividing by the total shares traded. VWAP = Cumulative Typical Price x Volume/Cumulative Volume Where Typical Price = High price + Low price + Closing Price/3 Cumulative = total since the trading session opened. How Is VWAP Used? VWAP is used in different ways by traders. Traders may use VWAP as a trend confirmation tool and build trading rules around it. For instance, they may consider stocks with prices below VWAP as undervalued and those with prices above it, as overvalued. If prices below VWAP move above it, traders may go long on the stock. If prices above VWAP move below it, they may sell their positions or initiate short positions. Institutional buyers including mutual funds use VWAP to help move into or out of stocks with as small of a market impact as possible. Therefore, when they can, institutions will try to buy below the VWAP or sell above it. This way their actions push the price back toward the average, instead of away from it. Source: www.investopedia.com
Indicador Pine Script®
por Hampeh
2
Anchored VWAP Pinch & Handoff, Intervals, and Signals"Anchored VWAP Pinch & Handoff, Intervals, and Signals" is an AVWAP toolbox for those who like to use various VWAP trading techniques. The indicator is currently comprised of the following three sections: • The Pinch & Handoff section (shown above on chart) allows manually setting an upper and lower AVWAP (Pinch) along with an additional AVWAP (Handoff) by entering dates or by dragging the vertical anchor lines to the desired significant events on chart. Each of these three AVWAPs can also be set to show zones above and/or below by a percentage or standard deviation amount. The theory behind this method is that the upper and lower AVWAPs may act as dynamic support and resistance levels, effectively creating a price range or channel. As price moves between these two VWAP levels, it becomes squeezed or consolidated within that range. Further conjecture is that the longer the price remains within the range of the two anchored VWAP values, the higher the potential for an explosive breakout. Traders using this strategy may interpret the prolonged consolidation as a period of price compression, with the expectation that a significant move in either direction is likely to occur. Traders employing the AVWAP Pinch strategy might look for specific chart patterns or additional confirmation signals to enter a trade. For example, a breakout above the upper anchored VWAP level could trigger a long trade, while a breakdown below the lower anchored VWAP level could signal a short trade. Stop-loss orders and profit targets are typically set based on the trader's risk tolerance and the volatility of the asset. The third AVWAP (Handoff) is typically set after price has broken through the Pinch, and is used as a new level of support or resistance. The "Pinch & Handoff" phrase is believed to have been coined by Brian Shannon, who has popularized this method. • The Intervals section (shown above on chart) is comprised of six periodic AVWAPs which cyclically reset. Their default settings are 1 Day, 2 Days, 1 Week, 1 Month, 1 Quarter, and 1 Year. They each may be set to desired period and when they are enabled the VWAPs whose periods are lower than the current chart timeframe are automatically hidden. For example a 1 Day AVWAP is not useful on a 1 Week chart so it would be hidden from that timeframe. When using AVWAPs from higher timeframes it may be helpful to set your chart to "Scale price chart only". This can be enabled by right clicking on your chart's price column and then left clicking "Scale price chart only" to enable that option. • The Auto section (shown above on chart) is comprised of two automatic Anchored VWAPs. There are choices for setting anchors automatically based upon Highest Source, Highest Volume, Lowest Source, Lowest Volume, Pivot High, and Pivot Low. Because these two VWAPs work retroactively they are drawn with lines instead of plots. There is currently a limitation of 500 lines that may be drawn at any given time and the logic within this indicator uses a line for every bar of VWAP that is drawn, so if the combined length of both of these VWAPs exceeds 500 bars the earliest lines would disappear. For typical use of looking for the highest high in the last 50 bars or the last fractal this limitation should not be an issue. --- All of the plots have been titled including hidden plots that are generated for the AVWAP line drawings. All of the various types of AVWAP within the indicator should be available as choices within the Alert creation dialog if use of alerts is desired. --- NOTICE: This is an example script and not meant to be used as an actual strategy. By using this script or any portion thereof, you acknowledge that you have read and understood that this is for research purposes only and I am not responsible for any financial losses you may incur by using this script!
Indicador Pine Script®
por allanster
45
VWAP Trendfollow Strategy [wbburgin]This is an experimental strategy that enters long when the instrument crosses over the upper standard deviation band of a VWAP and enters short when the instrument crosses below the bottom standard deviation band of the VWAP. I have added a trend filter as well, which stops entries that are opposite to the current trend of the VWAP. The trend filter will reduce total false breakouts, thus improving the % profitable while maintaining the overall returns of the strategy. Because this is a trend-following breakout strategy, the % profitable will typically be low but the average % return will be higher. As a rule, be sure to look at the average winning trade % compared to the average losing trade %, and compare that to the % profitable to judge the effectiveness of a strategy. Factor in fees and slippage as well. This strategy appears to work better with the lower timeframes, and I was impressed with its results. It also appears to work on a wide range of asset classes. There isn't a stop loss or take profit built-in (other than the reversal signals, which close the current trade), so I would encourage you to expand on the strategy based on your own trading parameters. You can toggle off the bar colors and the trend filter if you so desire. Future updates to this script (or ideas of improving on it) might include a take profit level set at one standard deviation past the current level and a stop loss level set at one standard deviation closer to the vwap from the current level - or applying a multiple to the two based off of your reward/risk ratio. About the strategy results below: this is with commissions of 0.5 % per trade.
Estratégia Pine Script®
por wbburgin
22
NSDT Horizontal VWAPThis script plots VWAP as a horizontal line starting at the most recent candle and extending backwards for a period of 10 to make it easier to see. (default is 10 but can be changed to fit your needs) You may only want to see where VWAP is currently and not need to see the entire day. Helps keep the chart clean. Colors and line settings can all be modified. You can show the original VWAP plot as well for reference. What Is the Volume-Weighted Average Price (VWAP)? The volume-weighted average price (VWAP) is a technical analysis indicator used on intraday charts that resets at the start of every new trading session. It's a trading benchmark that represents the average price a security has traded at throughout the day, based on both volume and price. VWAP is important because it provides traders with pricing insight into both the trend and value of a security.
Indicador Pine Script®
por NorthStarDayTrading
1
All-In-One Auto Anchored VWAPsA chart isn't trendy without a VWAP (which stands for volume weighted average price). This indicator allows you to choose 3 different anchored VWAPs, and customize the anchor period from one of many different options, including: - Daily - Weekly - Monthly - Quarterly - Yearly - All Time - Specific Pivots - Specific Sessions You can then choose whether you want to anchor to the open, highest or lowest value within that period. The indicator will automatically update every time a new anchor point is triggered. Every VWAP has colors and standard deviation bands as an optional setting. As interest in the script grows I will continue to add new features.
Indicador Pine Script®
por Texmoonbeam
14
5EMA BollingerBand Nifty Stock Scanner What ? We all heard about (well: over-heard) 5-EMA strategy. Which falls into the broader category of mean reversal type of trading setup. What is mean reversal? Price (or any time series, in fact) tries to follow a mean . Whenever price diverges from the mean it tries to meet it back. It is empirically observed by some traders (I honestly don't know who first time observed it) that in Indian context specially, 5 Exponential Moving Average (5-EMA) works pretty good as that mean. So whenever price moves away from that 5-EMA, it ultimately comes back and attain total nirvana :) Means: if price moved way higher than the 5EMA without touching it, then price will correct to meet it's 5-EMA and if price moved way lower, it will be uplifted to meet it's 5-EMA. Funny - but it works ! Now there are already enough social media coverage on this 5-EMA strategy/setup. Even TradingView has some excellent work done on these setups. Kudos to all those great souls. So when we came to know about this, we were thinking what we should do for the community. Because it is well cover topic (specially in Indian context). Also, there are public indicators. Then we thought why not come up with a scanner which will scan all the Nifty-50 constituent stocks and find out on the fly, real-time which all stocks are matching this 5-EMA setup and causing a Buy/Sell trade recommendation. Hence here we are with the first version of our first scanner on the 5EMA setup (well it has some more masala than merely a 5-EMA setup). Why? Parts of why is already covered up. Now instead of blindly following 5-EMA setup, we added the Bollinger band as well. Again: it's also not new. There are enough coverage in social media about the 5-EMA+BB strategy/setup. We mercilessly borrowed from all of these. Suppose you have an indicator. Now you apply the indicator in your chart. And then you need to (rock) and roll through your watchlist of Nifty-50 stocks (note: TradingView has no default watchlist of Nifty-50 stock by default - you have to create one custom watchlist to list all manually) to find out which all are matching the setup, need to take a note about the trade recomendations (entry, SL, target) and other stuffs like VWAP, Volume, volatility (Bollinger Band Width). Not any more. This scanner will track all the Nifty-50 stocks (technically: 40 stocks other than Banking stocks) and provide which one to Buy or Sell (if any), what's the entry, SL, target, where is the VWAP of the day, what's the picture in volume (high, low, rising, falling) and the implied volatility (using Bolling band width). Also it has a naive alerting mechanism as well. In fact the code is there to monitor the (Future) OI also and all the OI drama (OI vs price and all the 4 stuffs like long build up, long unwinding, short covering, short buildup). But unfortunately, due to some limitations of the TradingView (that one can not monitor more than 40 `ta.security` call) we have to comment out the code. If you wish you can monitor only 20 stocks and enable the OI monitoring also (20 for stocks + 20 for their OI monitoring .. total 40 `ta.security` call). How? To know the divergence from 5-EMA we just check if the high of the candle (on closing) is below the 5-EMA. Then we check if the closing is inside the Bollinger Band (BB). That's a Buy signal. SL: low of the candle, T: middle and higher BB. Just opposite for selling. 5-EMA low should be above 5-EMA and closing should be inside BB (lesser than BB higher level). That's a Sell signal. SL: high of the candle, T: middle and lower BB. Along with we compare the current bar's volume with the last-20 bar VWMA (volume weighted moving average) to determine if the volume is high or low. Present bar's volume is compared with the previous bar's volume to know if it's rising or falling. VWAP is also determined using `ta.vwap` built-in support of TradingView. The Bolling Band width is also notified, along with whether it is rising or falling (comparing with previous candle). Simple, but effective. Customization As usual the EMA setup (5 default), the BB setup (20 SMA with 1.5 standard deviation), we provided option wherther to include or exclude BB role in the 5-EMA setup (as we found out there are two schools of thought .. some people use BB some don't. Lets make all happy :)) We also provide options to choose other symbols using Settings if they wish so. We have the default 40 non banking Nifty stocks (why non-banking? - Bank Nifty is in ATH :) .. enough :)). But if user wishes can monitor others too (provided the symbol is there in TradingView). Although we strongly recommend the timeframe as 30 minutes , you can choose what's fit you most. The output of the scanner is a table. By default the table is placed in the right-bottom (as we are most comfortable with that). However you can change per your wish. We have the option to choose that. What is unique in it ? This is more of an indicator. This is a scanner (of Nifty-50 stocks). So you can apply (our recommendation is in 30m timeframe) it to any chart (does not matter which chart it is) and it will show every 30 mins (which is also configurable) which all stocks (along with trade levels) to Buy and Sell according to the setup. It will ease your trading activity. You can concentrate only on the execution, the filtering you can leave it to this one. Limitations There is a build in limitation of the TradingView platform is that one can call only upto 40 securities API. Not beyond that. So naturally we are constraint by that. Otherwise we could monitor 190 Nifty F&O stocks itself. 30m is the recommended timeframe. In very lower (say 5m) this script tends to go out of heap (out of memory). Please note that also. How to trade using this? Put any chart in 30m (recommended) timeframe. Apply this screener from Indicators (shortcut to launch indicators is just type / in your keyboard). This will provide the Buy (shown in green color) or Sell (shown in red color) recommendations in a table, at every 30m candle closing. Note the volume and BB width as well. Wait for at least 2 5-minutes candles to close above/below the recommended level . Take the trade with the SL and target mentioned. Mentions @QuantNomad. The whole implementation concept we mercilessly borrowed from him, even some of his code snippet we took it (after asking him through one of his videos comment section and seeking explicit permission which he readily granted within an hour). Thank You sir @QuantNomad. Indebted to you. Monika (Rawat) ji: for reviewing, correcting, providing real time examples during live market hours, often compromising her own trading activities, about the effectiveness and usefulness of this setup. Thank You madam ji. Indebted to you. There are innumerable contents in social media about this. Don't even know whom all we checked. Thanks to all of them. Happy Trading (in stocks - isn't enough of Indices already?) Disclaimer This piece of software does not come up with any warrantee or any rights of not changing it over the future course of time. We are not responsible for any trading/investment decision you are taking out of the outcome of this indicator.
Indicador Pine Script®
por pradipandsuvra
15
PM RTH AH VWAPs [vnhilton]FOR STOCKS ONLY. Simply 3 different VWAPs for the pre-market, regular trading session, and the after hours, using session.is_ variables (not sure if they were recently added. Regardless, it would be nice to have a session.isfirstbar_postmarket variable to avoid having to write the code for calculating VWAP instead of simply using a ta.vwap function). Treats all 3 sections of the day as separate sessions with their own characteristics i.e. differing levels of liquidity and market dynamics. I would argue this is better than just using a VWAP calculated from the pre-market open until after hours close, as it would make using the VWAPs as a benchmark more accurate when taking trades at these different periods of the day.
Indicador Pine Script®
por vnhilton
VWAP+15EMA with RSIVWAP+EMA+RSI Strategy for the group MelléCasH This strategy will enter a long position when the closing price is above both the VWAP and the 15 EMA, and the RSI is above the specified overbought level. It will exit the position when the price falls by the specified stop loss percentage, rises by the specified take profit percentage, or when the trailing stop loss (which trails the highest price achieved after the position was entered by the specified percentage) is hit. The VWAP, EMA, and RSI indicators are also plotted on the chart for reference.
Estratégia Pine Script®
por Soeccke
2
Moonhub IndexMoonhub Index combines several popular technical indicators to create an aggregated index that aims to give a clearer overall picture of the market. The index takes into account the current market condition (trending, ranging, or volatile) to adjust its calculations accordingly. The indicators used in this composite index are: Hull Moving Average (HMA) Fisher Transform (FT) Williams Alligator Moving Average Convergence Divergence (MACD) Average True Range (ATR) On-Balance Volume (OBV) Money Flow Index (MFI) Accumulation/Distribution (AD) Pivot Points True Strength Index (TSI) Volume-Weighted Average Price (VWAP) The script calculates the values of each indicator and then normalizes and weighs them according to predefined weights. The composite index is formed by summing the weighted values of each indicator. The final Moon Index is plotted on the chart, along with several other related lines like the exponential moving averages (EMA) and simple moving averages (SMA) of the index. This custom index can be used by traders to get a more comprehensive view of the market and make better-informed trading decisions based on the combined insights of multiple indicators.
Indicador Pine Script®
por Moonhub
2
Percent of U.S. Stocks Above VWAPThis indicator plots a line reflecting the percentage of all U.S. stocks above or below their VWAP for the given candle. Horizontal lines have been placed at 40% (oversold), 50% (mid-line), and 60% (overbought). I recommend using this indicator as a market breadth indicator when trading individual stocks. In my experience, this indicator is best utilized while trading the major indices (SPX, SPY, QQQ, IWM) or their futures (ES, NQ, RTY) in the following manner: - When the line crosses 50%, a green or red triangle is plotted indicating the majority of market momentum has turned bullish or bearish based on price positioning vs. VWAP. Look for longs when the line is rising (green) or above 50%, or shorts when the line is falling (red) or below 50%. - When the line is below 40%, indicator shows red shading; I would not be long anything during this period. When the line exits this level, I begin looking for long entries. This line is adjustable in the indicator settings if you prefer to use a tighter or looser oversold level. - When the line is above 60%, indicator shows green shading; I would not be short anything during this period. When the line exits this level, I begin looking for short entries. This line is adjustable in the indicator settings if you prefer to use a tighter or looser overbought level. This indicator uses the TradingView ticker “PCTABOVEVWAP.US”, thus it only updates during NY market hours. If trading futures, I recommend applying VWAP to your chart and using that as the level to trade against in a similar manner, along with your personal price action analysis and other indicators you find useful.
Indicador Pine Script®
por BigGuavaTrading
18
[Hoss] VWAP ADThe VWAP ( Volume Weighted Average Price ) Deviation script is a powerful tool designed for traders to analyze the relationship between price and volume . By calculating deviations around the VWAP , the script allows users to identify key support and resistance levels that can help in making better-informed trading decisions. The script calculates VWAP based on the chosen data source (default is closing price) and then computes deviations above and below the VWAP using either the Average Deviation or the Standard Deviation method. The user can select the desired method through the script's input options. These deviations are then plotted as bands on the chart, providing a visual representation of the areas where the price may potentially revert or experience a breakout. A unique and valuable feature of this script is the addition of a monitor that counts the number of times the price crosses above the Upper Deviation level 2 and below the Lower Deviation level 2 within a user-defined lookback period. This monitor is displayed as a table in the bottom right corner of the chart and can be enabled or disabled through an input option. The cross count monitor serves as a valuable aid to traders by providing insights into the historical frequency of price crossing the deviation levels. This information can be used to identify potential trading opportunities based on historical price behavior around these levels.
Indicador Pine Script®
por khosscrypto
23
JS-TechTrading: VWAP Momentum_Pullback StrategyGeneral Description and Unique Features of this Script Introducing the VWAP Momentum-Pullback Strategy (long-only) that offers several unique features: 1. Our script/strategy utilizes Mark Minervini's Trend-Template as a qualifier for identifying stocks and other financial securities in confirmed uptrends. NOTE: In this basic version of the script, the Trend-Template has to be used as a separate indicator on TradingView (Public Trend-Template indicators are available on TradingView – community scripts). It is recommended to only execute buy signals in case the stock or financial security is in a stage 2 uptrend, which means that the criteria of the trend-template are fulfilled. 2. Our strategy is based on the supply/demand balance in the market, making it timeless and effective across all timeframes. Whether you are day trading using 1- or 5-min charts or swing-trading using daily charts, this strategy can be applied and works very well. 3. We have also integrated technical indicators such as the RSI and the MA / VWAP crossover into this strategy to identify low-risk pullback entries in the context of confirmed uptrends. By doing so, the risk profile of this strategy and drawdowns are being reduced to an absolute minimum. Minervini’s Trend-Template and the ‘Stage-Analysis’ of the Markets This strategy is a so-called 'long-only' strategy. This means that we only take long positions, short positions are not considered. The best market environment for such strategies are periods of stable upward trends in the so-called stage 2 - uptrend. In stable upward trends, we increase our market exposure and risk. In sideways markets and downward trends or bear markets, we reduce our exposure very quickly or go 100% to cash and wait for the markets to recover and improve. This allows us to avoid major losses and drawdowns. This simple rule gives us a significant advantage over most undisciplined traders and amateurs!   'The Trend is your Friend'. This is a very old but true quote. What's behind it??? • 98% of stocks made their biggest gains in a Phase 2 upward trend. • If a stock is in a stable uptrend, this is evidence that larger institutions are buying the stock sustainably. • By focusing on stocks that are in a stable uptrend, the chances of profit are significantly increased. • In a stable uptrend, investors know exactly what to expect from further price developments. This makes it possible to locate low-risk entry points. The goal is not to buy at the lowest price – the goal is to buy at the right price! Each stock goes through the same maturity cycle – it starts at stage 1 and ends at stage 4   Stage 1 – Neglect Phase – Consolidation Stage 2 – Progressive Phase – Accumulation Stage 3 – Topping Phase – Distribution Stage 4 – Downtrend – Capitulation This strategy focuses on identifying stocks in confirmed stage 2 uptrends. This in itself gives us an advantage over long-term investors and less professional traders. By focusing on stocks in a stage 2 uptrend, we avoid losses in downtrends (stage 4) or less profitable consolidation phases (stages 1 and 3). We are fully invested and put our money to work for us, and we are fully invested when stocks are in their stage 2 uptrends. But how can we use technical chart analysis to find stocks that are in a stable stage 2 uptrend? Mark Minervini has developed the so-called 'trend template' for this purpose. This is an essential part of our JS-TechTrading pullback strategy. For our watchlists, only those individual values that meet the tough requirements of Minervini's trend template are eligible. The Trend Template • 200d MA increasing over a period of at least 1 month, better 4-5 months or longer • 150d MA above 200d MA • 50d MA above 150d MA and 200d MA • Course above 50d MA, 150d MA and 200d MA • Ideally, the 50d MA is increasing over at least 1 month • Price at least 25% above the 52w low • Price within 25% of 52w high • High relative strength according to IBD. NOTE: In this basic version of the script, the Trend-Template has to be used as a separate indicator on TradingView (Public Trend-Template indicators are available in TradingView – community scripts). It is recommended to only execute buy signals in case the stock or financial security is in a stage 2 uptrend, which means that the criteria of the trend-template are fulfilled. This strategy can be applied to all timeframes from 5 min to daily. The VWAP Momentum-Pullback Strateg y For the JS-TechTrading VWAP Momentum-Pullback Strategy, only stocks and other financial instruments that meet the selected criteria of Mark Minervini's trend template are recommended for algorithmic trading with this startegy. A further prerequisite for generating a buy signals is that the individual value is in a short-term oversold state (RSI). When the selling pressure is over and the continuation of the uptrend can be confirmed by the MA / VWAP crossover after reaching a price low, a buy signal is issued by this strategy. Stop-loss limits and profit targets can be set variably. Relative Strength Index (RSI) The Relative Strength Index (RSI) is a technical indicator developed by Welles Wilder in 1978. The RSI is used to perform a market value analysis and identify the strength of a trend as well as overbought and oversold conditions. The indicator is calculated on a scale from 0 to 100 and shows how much an asset has risen or fallen relative to its own price in recent periods. The RSI is calculated as the ratio of average profits to average losses over a certain period of time. A high value of the RSI indicates an overbought situation, while a low value indicates an oversold situation. Typically, a value > 70 is considered an overbought threshold and a value < 30 is considered an oversold threshold. A value above 70 signals that a single value may be overvalued and a decrease in price is likely , while a value below 30 signals that a single value may be undervalued and an increase in price is likely. For example, let's say you're watching a stock XYZ. After a prolonged falling movement, the RSI value of this stock has fallen to 26. This means that the stock is oversold and that it is time for a potential recovery. Therefore, a trader might decide to buy this stock in the hope that it will rise again soon. The MA / VWAP Crossover Trading Strategy This strategy combines two popular technical indicators: the Moving Average (MA) and the Volume Weighted Average Price (VWAP). The MA VWAP crossover strategy is used to identify potential trend reversals and entry/exit points in the market. The VWAP is calculated by taking the average price of an asset for a given period, weighted by the volume traded at each price level. The MA, on the other hand, is calculated by taking the average price of an asset over a specified number of periods. When the MA crosses above the VWAP, it suggests that buying pressure is increasing, and it may be a good time to enter a long position. When the MA crosses below the VWAP, it suggests that selling pressure is increasing, and it may be a good time to exit a long position or enter a short position. Traders typically use the MA VWAP crossover strategy in conjunction with other technical indicators and fundamental analysis to make more informed trading decisions. As with any trading strategy, it is important to carefully consider the risks and potential rewards before making any trades. This strategy is applicable to all timeframes and the relevant parameters for the underlying indicators (RSI and MA/VWAP) can be adjusted and optimized as needed. Backtesting Backtesting gives outstanding results on all timeframes and drawdowns can be reduced to a minimum level. In this example, the hourly chart for MCFT has been used. Settings for backtesting are: - Period from April 2020 until April 2021 (1 yr) - Starting capital 100k USD - Position size = 25% of equity - 0.01% commission = USD 2.50.- per Trade - Slippage = 2 ticks Other comments • This strategy has been designed to identify the most promising, highest probability entries and trades for each stock or other financial security. • The RSI qualifier is highly selective and filters out the most promising swing-trading entries. As a result, you will normally only find a low number of trades for each stock or other financial security per year in case you apply this strategy for the daily charts. Shorter timeframes will result in a higher number of trades / year. • As a result, traders need to apply this strategy for a full watchlist rather than just one financial security.
Estratégia Pine Script®
por JS_TechTrading
3
Auto anchored VWAP Highest/Lowest Last 'n' bars The VWAP (Volume Weighted Average Price) indicator is used to calculate the average price weighted by volume. This indicator is designed to automatically draw VWAPs from the highest and lowest points of the last 'n' bars. It utilizes arrays to calculate the values of VWAP and plot it on the chart on the last historical bar. This version was coded to get a similar version to the official "VWAP Auto anchored" with the highest/lowest selected settings. To use VWAP, traders can look for price movements relative to the VWAP line to identify potential support or resistance levels. It can also be used in conjunction with other technical indicators to develop trading strategies.
Indicador Pine Script®
por TJalam
13
VWAP filtered MACD Bars with positive MACD histogram value and closing above VWAP are colored, long positions should be taken in areas made of those bars. Similarly, bars with negative MACD histogram value and closing below VWAP are also colored, short positions should be taken there. This indicator by default should be a part of your trend following trading system. In the setting you can change colors Above grow: positive and rising MACD histogram value Above fall: positive and falling MACD histogram value Below fall: negative and falling MACD histogram value Below grow: negative and rising MACD histogram value
Indicador Pine Script®
por phk28
VWAP Boulevard [vnhilton](OVERVIEW) The idea of this indicator comes from traders identifying supply to mainly look for shorts. Scenarios would be gap ups or pump & dumps where huge volume is transacted, & bag-holders are present. Some traders would draw resistance lines, I myself used to draw supply zones using the volume profile on that day, & others used the day VWAP on those days. VWAP Boulevard (I believe the name comes from the trader named team3dstocks) draws day VWAP lines from the highest volume days for a given period (excluding the current day). (FEATURES) - Draws horizontal & vertical lines from up to 250 highest volume days out of up to 3568 days, with the ability to hide either of these lines, their thicknesses, styles - Extend/cut horizontal lines, or extend them all the way to the right - Show the day VWAP, volume & age for these days in labels, with the ability to show what information you want to see only - Separate customizable color forms for the lines & labels - ordinary (1 color); volume (2 color gradient from lowest to highest volume of the highest volume days); age (2 color gradient from youngest to oldest volume of the highest volume days) - Edit offset & size of labels, & hide them - Hide vertical lines From left to right: Age color; ordinary color; volume color 250 highest volume days in the past year. Very messy so it's very likely you won't be using this but the ability to draw lines from 250 highest volume days is there if needed (DRAWDOWNS) - This indicator will only on the daily timeframe (error message will show up if unaware of this, & can be toggled off). Unfortunately, this would mean you would have to draw the lines manually yourself if you wish to use them on intraday timeframes. - You may also encounter the 'Pine cannot determine the referencing length of a series. Try using max_bars_back' error. This occurs when the lookback period is very high & the indicator attempts to recalculate I believe. If this happens then reload the indicator. The logic I used to obtain the highest volume days were to put all of the volume days in a given period in 1 array, then to sort them from highest to lowest, & also store their sorted indices in an separate array as well, so that drawings for each volume day could be done from the 2 arrays. //Volume for last N periods var int pastVol = array.new_int(lookbackPeriodFixed) for i = 0 to lookbackPeriodFixed - 1 array.set(pastVol, i, int(volume )) sortedIndices = array.sort_indices(pastVol, order.descending) //All Indices of sorted volume from highest to lowest sortedIndices2 = array.slice(sortedIndices, 0, highestVolDays) //Indices of sorted volume from highest to lowest array.sort(pastVol, order.descending) //All Volume sorted from highest to lowest pastVol2 = array.slice(pastVol, 0, highestVolDays) //Volume sorted from highest to lowest //Drawings for i = 0 to highestVolDays - 1 index := array.get(sortedIndices, i) vol := array.get(pastVol, i) Since these array sizes were determined from the lookback period, it would mean that the request.security() function used to obtain daily values on intraday timeframes wouldn't work for a lookback period >20 (20 * 2 values I believe, which are the day VWAP & the day volume) as TradingView has put a maximum amount of calls of 40 in 1 script. Therefore, for intraday plots to work I would have to change the logic for getting the day VWAP & day volume for the highest days, as the request.security() function doesn't work on for loops, & this would also mean that the user would only be able to draw lines from up to 20 highest volume days instead of 250. I couldn't go forward with this as I wasn't able to find the logic to pick the highest volume days & their day VWAPs & times (indexes) without using a for loop. If anyone has any solutions (including for the 'Pine cannot determine the referencing length of a series. Try using max_bars_back' error) then please let me know. I've also left commented-out code for dealing with intraday drawings for future use.
Indicador Pine Script®
por vnhilton
12