EXITOSquad-Price-Volume Spike DetectorThis indicator identifies potential accumulation and distribution zones by analyzing price movements in conjunction with volume signals.
What the Indicator Detects:
Accumulation (green):
A significant upward price spike combined with rising volume → typical behavior of smart money buying into weakness or lows.
Distribution (red):
A significant downward price spike combined with rising volume → often indicates smart money quietly exiting at highs or strength.
Technical Logic:
A price spike is detected when the difference between close and open exceeds a defined multiple of the ATR (default: 2× ATR).
A volume spike is present when the current volume exceeds the SMA of volume over X periods (default: 14).
Use Cases:
Spot early turning points in the market through unusual price & volume behavior
Identify potential bullish accumulation or bearish distribution phases
Combine it with RSI, moving averages, or volume profile tools for confirmation
Note:
This indicator works best when combined with your own price action analysis.
It provides powerful insights – but it's not a standalone entry signal. Use it consciously as part of a complete strategy.
Volume
Kombine Al/Sat SistemiFeatures:
Support/Resistance Levels: Green line indicates support, red line indicates resistance levels.
RSI Indicator: Green triangle signals when RSI goes above 30.
Buy/Sell Signals: Shows "BUY" and "SELL" labels with EMA intersections and RSI combination.
Money Input: Marked with a blue circle in case of volume increase + price increase.
MACD Histogram: Provides extra momentum information.
This indicator will show all these features together when you add it to your chart. You can adjust the parameters according to your own trading strategy.
VWAP+bgcolorThe "VWAP+bgcolor" indicator is an enhanced version of the Volume Weighted Average Price (VWAP) that visually highlights price action relative to the VWAP line. By coloring the chart background, it helps traders quickly identify whether the price is above or below the VWAP, making it easier to spot bullish or bearish market conditions.
Buy Sell Ma20 with Volume_[Longtien]Strategy Name: Buy/Sell MA20 with Volume
This strategy uses TradingView’s built-in Technical Rating signals on the 15-minute timeframe, combining them with volume analysis and ATR-based dynamic stop loss.
Buy (Long): When the technical rating > 0.6 and volume is above its 20-period average.
Sell (Short): When the technical rating < -0.6 and volume is above its 20-period average.
Exits use dynamic ATR-based trailing stop and loss.
You can switch between signal sources: Moving Averages, Oscillators, or All.
Pivot Levels with EMA Trend📌 Trend Change Levels with EMA Trend
✨ Description:
This TradingView script identifies clean trend change levels based on 1-hour structure shifts and filters them to keep only those not invalidated. It follows the "Jake Ricci" method, each level is printed at the beginning of the candle that changes the trend, on a 1 hour chart. For precision, make sure to exclude after/pre market and only use the levels on regular hours charts.
It includes dynamic EMAs (9, 50, 200), intraday VWAP, the daily open level printed, and a visual trend label based on EMA(9) slope.
Designed for intermediate traders, it helps build bias, manage entries, and avoid false setups by focusing on clean, reactive levels that the market respects.
🔧 Core Logic:
On the 1H chart, the script compares current and previous closes to detect trend direction. If the trend flips (e.g., up to down), the open of the candle that caused the flip becomes a candidate level.
Only levels that remain untouched by future candle closes are plotted — this filters out “weak” levels that price already violated (which means, a candle closes after passing through the level).
These levels become key S/R zones and often act as reaction points during pullbacks, traps, and liquidity sweeps.
The idea is to check how the price reacts to those levels. Usually there's a clean retest of the level. After that, if the price continues in that direction, it tends to reach the following level.
🔹 Included Tools:
🟣 Trend Change Levels (1H):
Fixed horizontal lines based on confirmed shifts in trend, shown only when not broken.
📉 EMAs (9 / 50 / 200):
Visibility can be set per timeframe. Use for trend context.
📍 EMA Trend Label:
Shows \"UP\", \"DOWN\", or \"RANGE\" based on EMA(9) slope.
🔵 VWAP (Intraday Reset):
Real-time volume-weighted average price that resets daily. Useful for fair value zones and reversion plays.
🟠 Daily Open Line:
Plot of the current day’s open. Used for intraday directional bias. Usually: DO NOT take longs below the Open Print, DO NOT take shorts above it.
📊 ATR Table:
Displays current ATR multiplier on the chart. It's useful to understand if the market is expanding or not.
📈 How to Use It (Strategy):
1. Start on the 1H chart to generate levels.
Only the open of candles that reversed trend are considered — and only if future candles didn’t close through them. I suggest manually adding horizontal lines to mark again the levels, so that they stick to all the timeframes.
2. Use the trend label to decide your bias — \"UP\" for long setups, \"DOWN\" for shorts. Avoid trading against the slope.
3. Switch to the 5m chart and wait for price to approach a plotted level. These are often used for manipulation, retests, or clean reversals.
4. Look for confirmation: rejection candles, break-and-retest, strong engulfing candles, or traps above/below the level. ALWAYS check the price action around the level, along with the volume.
5. Check if VWAP or an EMA is near the level. If yes, the confluence strengthens the trade idea.
6. Use the ATR value to understand if the market is expanding (candles are bigger than the ATR). You don't want to stay in a slow and ranging trade.
✅ Example Entry Flow:
1. On the 1H chart, note a trend change level printed recently.
2. Check the current trend label — if it says \"UP,\" prefer longs.
3. Wait for price to retrace toward the level.
4. On the 5m, look for a bullish engulfing candle or trap setup at the level.
5. Check if VWAP and EMA(50) are near. If yes, execute the trade.
6. Set stop just under the low of the candle prior to your entry. Ideally, a retracing candle.
To be clear: imaging to be LONG, you wait for a retracement that should touch your level. You wait for a candle that resumes the LONG trend, enter when it breaks the high of the previous candle (sill in retracement), you place your stop under the candle prior to your entry.
Notes:
No repainting — levels only show up after confirmed shifts.
Removes broken levels for chart clarity and reliability.
Helps spot high-probability pullback zones and fakeouts.
Perfect confluence tool to support price action, SMC, or EMA strategies.
Works across multiple timeframes with customizable inputs.
👤 Ideal For:
Intraday traders looking for reactive entry points and direction confirmation.
Swing traders wanting to pinpoint continuation zones or reversal pivots.
🚨 Final Note: This indicator doesn’t generate buy/sell signals. It improves your trade filtering by identifying areas the market already respected and reacting to them with price action. Combine it with your own system , test it in replay, and use screenshots to document setups.
📌 If used with discipline, this becomes a precision tool — not a signal generator.
Trading Value (Volume*Price in Million) by Asharifan v5📊 Trading Value (Price × Volume in Million) by Asharifan v5
This indicator visualizes trading value (Price × Volume) on each bar in millions and compares it to the 20-day and 50-day average values. It's a simple yet powerful tool for spotting changes in market participation and institutional interest.
🔍 What It Shows:
Today’s P×V: Price × Volume in millions, plotted as a colored column.
20-day & 50-day Averages: Smooths recent trading value activity for trend awareness.
🎯 Why Use It:
Trading Value (Price × Volume) can reveal real buying/selling power, especially during breakouts or pullbacks.
Helps differentiate low-value moves from high-conviction moves.
Provides insight into volume quality beyond raw volume bars.
🧠 How to Use:
Look for spikes above average lines → possible institutional activity.
When price breaks key levels with rising P×V → confirmation of strength.
When price rises but P×V is weak → caution, rally might lack support.
Ultimate TABI Signal Visualizer (Overlay v8.4 Opt)// © dotcom880 (Based on original TABI by renderingnature1 & v4 Buy/Hold Entry Finder by runescapeyttanic)
// Indicator Purpose: Visualizes TABI RSI zones via background coloring on the main chart.
// Plots Buy/Sell signals (with confidence levels) and optional Moving Averages /
// Bollinger Bands directly on the price chart. Defaults optimized for D/W ETFs.
// Version: 8.4 (Indicator Overlay - Optimized D/W Defaults)
RSI Strategy (Volume Removed for Testing)Here’s a concise version for your strategy description:
---
### **RSI-Based Volume Strategy**
This strategy combines **RSI** and **Volume Spikes** to identify potential buy and sell signals.
- **Buy** when **RSI** falls below **30** (oversold) and there's a **volume spike**, signaling a possible reversal to the upside.
- **Sell** when **RSI** rises above **70** (overbought) and there's a **volume spike**, signaling a potential reversal to the downside.
**Inputs**:
- **RSI Length** (default 14)
- **RSI Buy Level** (default 30)
- **RSI Sell Level** (default 70)
- **Volume Multiplier** (default 1.5)
Ideal for markets with sharp reversals and strong volume movements. Test before live trading and use proper risk management.
---
Volume Spike with Entry & Stop LossSure! Here's a **short and concise description** of your strategy that you can share with the public:
---
### **Volume Spike with Entry & Stop Loss Strategy**
This strategy identifies **significant volume spikes** in the market combined with **price breakouts** to signal **buy entries**. It aims to capture strong momentum moves while managing risk with a **stop loss**.
- **Entry Signal**: When **volume spikes** (current volume > average volume by a specified multiplier) and the **price breaks above** the highest price in the last N periods.
- **Stop Loss**: Set at a fixed percentage below the entry price to limit potential losses.
**Key Benefits**:
- **Volume-based**: Focuses on detecting high market participation.
- **Price action**: Combines volume with price breakout for stronger entry signals.
- **Risk management**: Includes a stop loss to protect against significant drawdowns.
Ideal for traders looking for momentum-based entries with built-in risk control.
---
This is a **momentum strategy** that thrives during times of high market activity, making it useful for capturing trending moves while minimizing risk.
Auto Anchored VWAPs for FuturesAbout the Script
This indicator automatically plots five anchored VWAPs based on predefined starting times, offering traders key reference points across multiple timeframes. These starting points are hardcoded and cannot be customized, ensuring consistency across all time zones. Below are the anchored VWAPs and their respective starting times:
NY Session: Starts daily at 9:30 AM EST
Globex: Starts daily at 6:00 PM EST
Weekly: Resets every Sunday at 6:00 PM EST
Monthly: Anchored to the first session of the month at 6:00 PM EST
Yearly: Anchored to the first session of the year at 6:00 PM EST
How to Use the Script
1) Add the script to your chart.
2) Select the appropriate Daylight Savings Time format.
3) Customize the visual appearance to your preference.
4) Click "OK" to apply the changes.
Once configured, the VWAP levels will automatically adjust based on the predefined timeframes.
How the Script Works
The script calculates and plots anchored VWAPs at the predefined starting times listed above. As each session, week, month, and year progresses, the corresponding VWAP is recalculated and updated on the chart, providing traders with dynamic insights into market trends and volume-weighted price action.
Volume Spike Highlighter (RVOL Style)RVOL: A Measure of Unusual Trading Activity Compared to Historical Volume
Institutional Edge ProHere’s a cutting-edge TradingView indicator that combines hidden market mechanics for Bitcoin & Gold, with separate toggles for each asset. This script tracks whale activity, liquidity gaps, miner behavior, and institutional flows—giving you an institutional-grade edge.
VOLD IndicatorVOLD-Indicator can show us the trend of the day. The indicator shows us the value of the VOLD that is a ratio of the volume flowing in up-stocks divided by the volume flowing in down stocks. Readings above 3 and below -3 can be seen as relevant for a trend day.
FTB Cheklist🔍 FTB Cheklist – Precision-Based Breakout Strategy for Options Traders
FTB Cheklist is a tactical script built for serious day and swing traders looking to catch high-probability breakouts with clarity, confidence, and control.
This system is designed around key institutional concepts — combining volume spike breakouts, PDH/PDL levels, EMA alignment (8/13/50/200), and ATR-based price targets across the 30-minute, 1-hour, and daily timeframes. It visually guides your session entries and filters out noise, giving you clean, confirmed trade opportunities.
🔧 What It Does:
✅ Breakout Arrows when price breaks previous day high/low with volume confirmation & trend bias
📊 Dynamic Volume Spike Detection with time-sensitive multipliers (1.5 pre-noon, 1.2 after)
📈 Stacked EMAs Filter: Only show setups when trend is clearly in your favor
🎯 ATR-Based Price Targets: Projects 30m, 1h, and Daily levels upon breakout
🕐 Trading Hours Guidance overlay: Calls out the best times to trade (9:40–11:30 & 2:00–3:30)
🧭 Clean On-Chart Labels & Guidance to keep your execution focused and frictionless
🔑 Best For:
Day & swing traders of SPY, QQQ, and large-cap options
Traders who value structure, trend alignment, and measured targets
Avoiding FOMO and chop through visual clarity & volume precision
🔥 Built to respect bias. Built to respect time. Built for discipline .
FTB Cheklist isn’t just an indicator — it’s a trade execution assistant for serious technical traders. Load it up, trust the conditions, and trade the Cheklist.
ScalpSwing Pro SetupScript Overview
This script is a multi-tool setup designed for both scalping (1m–5m) and swing trading (1H–4H–Daily). It combines the power of trend-following , momentum , and mean-reversion tools:
What’s Included in the Script
1. EMA Indicators (20, 50, 200)
- EMA 20 (blue) : Short-term trend
- EMA 50 (orange) : Medium-term trend
- EMA 200 (red) : Long-term trend
- Use:
- EMA 20 crossing above 50 → bullish trend
- EMA 20 crossing below 50 → bearish trend
- Price above 200 EMA = uptrend bias
2. VWAP (Volume Weighted Average Price)
- Shows the average price weighted by volume
- Best used in intraday (1m to 15m timeframes)
- Use:
- Price bouncing from VWAP = reversion trade
- Price far from VWAP = likely pullback incoming
3. RSI (14) + Key Levels
- Shows momentum and overbought/oversold zones
- Levels:
- 70 = Overbought (potential sell)
- 30 = Oversold (potential buy)
- 50 = Trend confirmation
- Use:
- RSI 30–50 in uptrend = dip buying zone
- RSI 70–50 in downtrend = pullback selling zone
4. MACD Crossovers
- Standard MACD with histogram & cross alerts
- Shows trend momentum shifts
- Green triangle = Bullish MACD crossover
- Red triangle = Bearish MACD crossover
- Use:
- Confirm swing trades with MACD crossover
- Combine with RSI divergence
5. Buy & Sell Signal Logic
BUY SIGNAL triggers when:
- EMA 20 crosses above EMA 50
- RSI is between 50 and 70 (momentum bullish, not overbought)
SELL SIGNAL triggers when:
- EMA 20 crosses below EMA 50
- RSI is between 30 and 50 (bearish momentum, not oversold)
These signals appear as:
- BUY : Green label below the candle
- SELL : Red label above the candle
How to Trade with It
For Scalping (1m–5m) :
- Focus on EMA crosses near VWAP
- Confirm with RSI between 50–70 (buy) or 50–30 (sell)
- Use MACD triangle as added confluence
For Swing (1H–4H–Daily) :
- Look for EMA 20–50 cross + price above EMA 200
- Confirm trend with MACD and RSI
- Trade breakout or pullback depending on structure
Daily Volume High Notifier📜 Script Description – Daily Volume High Notifier
This indicator monitors trade volume and sends an alert whenever a new daily high in volume is reached. The high volume is reset at the beginning of each trading day, allowing traders to stay informed of significant intraday volume spikes.
🛠️ Features:
Tracks the highest trade volume for the current day.
Resets the volume high tracker at the start of each new day.
Sends a real-time notification (alert()) whenever a new volume high is detected.
Useful for identifying unusual activity, potential breakouts, or institutional participation.
📊 Visual Elements:
Blue histogram for standard volume.
Red line showing the current day’s highest volume so far.
🔔 How to Use:
Add the script to any chart.
Enable alerts using the built-in alert() function.
Receive notifications every time volume hits a new high for the day.
🔔 Setting up Alerts in TradingView:
After adding this indicator to your chart:
Click the Alarm Clock (Alerts) icon.
Set condition: Daily Volume High Notifier → alert() function call .
Choose your alert type (app notification, email, popup, etc.).
Name it something like "Volume High Alert" and hit Create.
This tool is ideal for day traders, scalpers, and volume-based strategy traders who want to be instantly notified of spikes in market activity.
Money Wave [Dakon]This indicator combines Money Flow with the powerful Wave Trend Oscillator (TCI) to detect market momentum, potential reversals, and divergence setups.
The system is built for precise entry signals when both tools align — especially around the zero line crossovers and momentum color flips.
1️⃣ RSI + MFI Area (Money Flow Zone)
Based on the relative movement between open, close, high, and low, smoothed by HMA.
A sensitive oscillator that detects buying/selling pressure and volume aggression.
Visually plotted as a dynamic histogram:
🟢 Above 0: Buying Pressure (Green Gradient)
🔴 Below 0: Selling Pressure (Red Gradient)
2️⃣ Wave Trend Oscillator
A classic momentum oscillator based on channel deviation and EMA smoothing.
Helps to catch waves and trends early, and detect when momentum shifts.
Color-coded bars:
🟢 Uptrend Acceleration
🔴 Downtrend Acceleration
Buy Signal:
✅ MFI crosses above 0, AND/OR its changes from red to green
✅ Wave changes color to green (indicating upside momentum)
Sell Signal:
✅ MFI crosses below 0, AND/OR its changes from green to red
✅ Wave changes color to red (indicating downside pressure)
Advanced SMC Toolkit by MaazAdvanced SMC Toolkit by Maaz
The Advanced Smart Money Concepts (SMC) Toolkit is a comprehensive trading indicator designed to visualize key price action elements used by institutional traders. This powerful tool helps retail traders identify important market structures and potential reversal zones with precision.
Key Features:
Break of Structure (BOS) - Clearly identifies when price breaks previous swing points, signaling potential trend changes
Order Blocks - Highlights institutional entry areas that often become support and resistance
Fair Value Gaps (FVG) - Detects imbalances in price action where markets move too quickly, leaving unfilled gaps
Premium/Discount Zones - Divides the chart into value areas to identify when price is trading at premium or discount levels
Liquidity Levels - Shows both internal and external liquidity zones where stop orders accumulate
Customizable Settings - Adjust swing sensitivity, minimum FVG size, and toggle various display elements to suit your trading style
This indicator combines multiple SMC concepts into one powerful overlay, helping you visualize institutional order flow and make more informed trading decisions. Perfect for traders focused on price action, market structure, and institutional trading concepts.
Contact for Custom Development
For freelance algorithmic trading, custom indicators, or custom trading and investment tools development, contact Maaz at maazshulli@gmail.com. Specializing in Python, PineScript and trading systems development.
Step-Based Trailing Stop-Loss IndicatorThis indicator is built for momentum traders who want to maximize winning trades and minimize losses through a smart, step-based trailing stop-loss system. Instead of using a fixed Take Profit, this tool dynamically protects profits once the trade reaches a favorable RR (Risk-to-Reward) level.
How It Works:
Manual Entry Input
You enter your Entry Price and select Buy/Sell in the settings.
This flexibility allows backtesting or live trade tracking.
Initial Setup
Default SL: 50 ticks(Tested on us30,but works on any pair you just need to adjust SL)
TP for reference: 4R — can be used for benchmarking, but we don't limit profits with a hard TP.
Trailing Logic
Once price reaches 3R in profit:
The SL begins trailing.
It starts at 2R, keeping a 1R cushion behind the max profit.
For every 0.5R gain, SL also moves up by 0.5R:
Example: At 3.5R → SL is at 2.5R
At 5.0R → SL is at 4.0R
This trailing continues until the SL is hit or the trend exhausts.
Chart Features
🟧 Entry Line
🔴 Initial SL
🟢 Reference TP (4R, optional)
🟣 Dynamic Trailing SL
🏷️ Labels for Entry & SL levels
Weekly AVWAP (Auto Reset)Weekly reset auto-anchored VWAP
✅ How to Use
• Apply to 10m, 65m, or 1D chart
• Orange line = current weekly AVWAP, resets every Monday
• Accurate for both intraday and higher timeframes
Green*DiamondGreen*Diamond (GD1)
Unleash Dynamic Trading Signals with Volatility and Momentum
Overview
GreenDiamond is a versatile overlay indicator designed for traders seeking actionable buy and sell signals across various markets and timeframes. Combining Volatility Bands (VB) bands, Consolidation Detection, MACD, RSI, and a unique Ribbon Wave, it highlights high-probability setups while filtering out noise. With customizable signals like Green-Yellow Buy, Pullback Sell, and Inverse Pullback Buy, plus vibrant candle and volume visuals, GreenDiamond adapts to your trading style—whether you’re scalping, day trading, or swing trading.
Key Features
Volatility Bands (VB): Plots dynamic upper and lower bands to identify breakouts or reversals, with toggleable buy/sell signals outside consolidation zones.
Consolidation Detection: Marks low-range periods to avoid choppy markets, ensuring signals fire during trending conditions.
MACD Signals: Offers flexible buy/sell conditions (e.g., cross above signal, above zero, histogram up) with RSI divergence integration for precision.
RSI Filter: Enhances signals with customizable levels (midline, oversold/overbought) and bullish divergence detection.
Ribbon Wave: Visualizes trend strength using three EMAs, colored by MACD and RSI for intuitive momentum cues.
Custom Signals: Includes Green-Yellow Buy, Pullback Sell, and Inverse Pullback Buy, with limits on consecutive signals to prevent overtrading.
Candle & Volume Styling: Blends MACD/RSI colors on candles and scales volume bars to highlight momentum spikes.
Alerts: Set up alerts for VB signals, MACD crosses, Green*Diamond signals, and custom conditions to stay on top of opportunities.
How It Works
Green*Diamond integrates multiple indicators to generate signals:
Volatility Bands: Calculates bands using a pivot SMA and standard deviation. Buy signals trigger on crossovers above the lower band, sell signals on crossunders below the upper band (if enabled).
Consolidation Filter: Suppresses signals when candle ranges are below a threshold, keeping you out of flat markets.
MACD & RSI: Combines MACD conditions (e.g., cross above signal) with RSI filters (e.g., above midline) and optional volume spikes for robust signals.
Custom Logic: Green-Yellow Buy uses MACD bullishness, Pullback Sell targets retracements, and Inverse Pullback Buy catches reversals after downmoves—all filtered to avoid consolidation.
Visuals: Ribbon Wave shows trend direction, candles blend momentum colors, and volume bars scale dynamically to confirm signals.
Settings
Volatility Bands Settings:
VB Lookback Period (20): Adjust to 10–15 for faster markets (e.g., 1-minute scalping) or 25–30 for daily charts.
Upper/Lower Band Multiplier (1.0): Increase to 1.5–2.0 for wider bands in volatile stocks like AEHL; decrease to 0.5 for calmer markets.
Show Volatility Bands: Toggle off to reduce chart clutter.
Use VB Signals: Enable for breakout-focused trades; disable to focus on Green*Diamond signals.
Consolidation Settings:
Consolidation Lookback (14): Set to 5–10 for small caps (e.g., AEHL) to catch quick consolidations; 20 for higher timeframes.
Range Threshold (0.5): Lower to 0.3 for stricter filtering in choppy markets; raise to 0.7 for looser signals.
MACD Settings:
Fast/Slow Length (12/26): Shorten to 8/21 for scalping; extend to 15/34 for swing trading.
Signal Smoothing (9): Reduce to 5 for faster signals; increase to 12 for smoother trends.
Buy/Sell Signal Options: Choose “Cross Above Signal” for classic MACD; “Histogram Up” for momentum plays.
Use RSI Div + MACD Cross: Enable for high-probability reversal signals.
RSI Settings:
RSI Period (14): Drop to 10 for 1-minute charts; raise to 20 for daily.
Filter Level (50): Set to 55 for stricter buys; 45 for sells.
Overbought/Oversold (70/30): Tighten to 65/35 for small caps; widen to 75/25 for indices.
RSI Buy/Sell Options: Select “Bullish Divergence” for reversals; “Cross Above Oversold” for momentum.
Color Settings:
Adjust bullish/bearish colors for visibility (e.g., brighter green/red for dark themes).
Border Thickness (1): Increase to 2–3 for clearer candle outlines.
Volume Settings:
Volume Average Length (20): Shorten to 10 for scalping; extend to 30 for swing trades.
Volume Multiplier (2.0): Raise to 3.0 for AEHL’s volume surges; lower to 1.5 for steady stocks.
Bar Height (10%): Increase to 15% for prominent bars; decrease to 5% to reduce clutter.
Ribbon Settings:
EMA Periods (10/20/30): Tighten to 5/10/15 for scalping; widen to 20/40/60 for trends.
Color by MACD/RSI: Disable for simpler visuals; enable for dynamic momentum cues.
Gradient Fill: Toggle on for trend clarity; off for minimalism.
Custom Signals:
Enable Green-Yellow Buy: Use for momentum confirmation; limit to 1–2 signals to avoid spam.
Pullback/Inverse Pullback % (50): Set to 30–40% for small caps; 60–70% for indices.
Max Buy Signals (1): Increase to 2–3 for active markets; keep at 1 for discipline.
Tips and Tricks
Scalping Small Caps (e.g., AEHL):
Use 1-minute charts with VB Lookback = 10, Consolidation Lookback = 5, and Volume Multiplier = 3.0 to catch $0.10–$0.20 moves.
Enable Green-Yellow Buy and Inverse Pullback Buy for quick entries; disable VB Signals to focus on Green*Diamond logic.
Pair with SMC+ green boxes (if you use them) for reversal confirmation.
Day Trading:
Try 5-minute charts with MACD Fast/Slow = 8/21 and RSI Period = 10.
Enable RSI Divergence + MACD Cross for high-probability setups; set Max Buy Signals = 2.
Watch for volume bars turning yellow to confirm entries.
Swing Trading:
Use daily charts with VB Lookback = 30, Ribbon EMAs = 20/40/60.
Enable Pullback Sell (60%) to exit after rallies; disable RSI Color for cleaner candles.
Check Ribbon Wave gradient for trend strength—bright green signals strong bulls.
Avoiding Noise:
Increase Consolidation Threshold to 0.7 on volatile days to skip false breakouts.
Disable Ribbon Wave or Volume Bars if the chart feels crowded.
Limit Max Buy Signals to 1 for disciplined trading.
Alert Setup:
In TradingView’s Alerts panel, select:
“GD Buy Signal” for standard entries.
“RSI Div + MACD Cross Buy” for reversals.
“VB Buy Signal” for breakout plays.
Set to “Once Per Bar Close” for confirmed signals; “Once Per Bar” for scalping.
Backtesting:
Replay on small caps ( Float < 5M, Price $0.50–$5) to test signals.
Focus on “GD Buy Signal” with yellow volume bars and green Ribbon Wave.
Avoid signals during gray consolidation squares unless paired with RSI Divergence.
Usage Notes
Markets: Works on stocks, forex, crypto, and indices. Best for volatile assets (e.g., small-cap stocks, BTCUSD).
Timeframes: Scalping (1–5 minutes), day trading (15–60 minutes), or swing trading (daily). Adjust settings per timeframe.
Risk Management: Combine with stop-losses (e.g., 1% risk, $0.05 below AEHL entry) and take-profits (3–5%).
Customization: Tweak inputs to match your strategy—experiment in replay to find your sweet spot.
Disclaimer
Green*Diamond is a technical tool to assist with trade identification, not a guarantee of profits. Trading involves risks, and past performance doesn’t predict future results. Always conduct your own analysis, manage risk, and test settings before live trading.
Feedback
Love Green*Diamond? Found a killer setup? Drop a comment or DM—I’d love to hear how you’re using it!
Supply & Demand Volume Zones [w/ Alerts & Zones]🛠️ How to Use:
Green Triangle: Buy signal
Red Triangle: Sell signal
Faint Green Box: Demand zone
Faint Red Box: Supply zone
Add alerts using the "Add Alert" button and select "Buy Alert" or "Sell Alert"
