Começar

Supertrend

Adoptive Supertrend - PivotsAnother experiment with Supertrend by making use of pivot point high/lows. Trailing Stop types used in this indicator are: ATR - plain ATR based supertrend Breakout - ATR based supertrend combined with breakout. (Trailing triggered only if price change is higher than HighPriceChange multiplier times ATR. Pivot Points - Trail only when new pivots created. Pivot stop multiplier is used below pivot low. Combined - Combine everything together
Indicador Pine Script™
por Trendoscope
7
SuperTrend MTF [Anan]Hello friends, As per many experts, supertrend indicator is best to use in combination with other indicators like MACD and RSI. The best thing about supertrend it sends out accurate signals on precise time. The indicator offers quickest technical analysis to enable the intraday traders to make faster decisions. It is extremely simple to use and understand. However, the indicator is not appropriate for all the situations. It works when the market is trending. Hence it is best to use for short-term technical analysis. Supertrend uses only the two parameters of ATR and multiplier which are not sufficient under certain conditions to predict the accurate direction of the market. Understanding and identifying Bull and Bear signals in supertrend is the main crux for the intraday traders. Both the downtrends as well uptrends are represented by the indicator. The flipping of the indicator over the closing price indicates signal. A Bull signal is indicated in green color whereas Bear signal is given as the indicator turns red. Options: - Change calculation source ( default SuperTrend uses: hl2) - Change calculation method (default SuperTrend uses: RMA) - Additional six multi-time frames SuperTrends
Indicador Pine Script™
por Mohamed3nan
5
Supertrend - Delayed TrailI use supertrend for for trailing stops. One of the problem of trailing stops in long term trend trading is we get stopped too early and then trend continues. To avoid this problem, we can limit or delay our trailing. In this modified version of supertrend, we can delay trailing by two methods: Bars : Trail after certain bars. Input DelayBars says after how many bars it should trail. Steps : Trail after reaching equivalent stop on the other side. ConsiderWicks option reverse direction upon high reaching trailing Sell stop or low reaching trailing buy stop (instead of close) ConsiderWicksForDelayByStep does the same thing for calculating if the steps have reached.
Indicador Pine Script™
por Trendoscope
4
SuperTrendRange by DGTSuperTrendRange study attempts to determine the state of the market • whether a well-established bull/bear trend is present • whether the market is trading in a range SuperTrendRange (STR) takes into account the volatility of the market - further details regarding volatility can be found in the description of “Volatility Bands by DGT” study Due to its similarities to SupertTrend (ST) and Parabolic SAR (SAR), I will try to explain by stating differences between them SuperTrendRange uses both the ATR (Average True Range) and STDEV (Standard Deviation) as part of its calculations - unlike ST and SAR where they use only ATR Sensitivity of the indicator is adjusted using the multiplier setting of both ATR and STDEV Additionally, unlike ST, the source of the basis of SuperTrendRange can be selected among the assets price value or its moving average Source and Length are adjustable too The SuperTrendRange, like Parabolic SAR indicator, appears on a chart as a series of dots, either above, below or unlike Parabolic SAR both above and below of the asset's price A dot placed - below the price when the market is trending upward - above the price when it is trending downward - both above and below when the price starts moving sideways – this is a feature that both SuperTrend and Parabolic SAR misses, where they are known to produce false signals and losing trades, whereas SuperTrendRange emphasis the zones of the ranges occurring and in most cases are considered no trade recommended zones. Please note that the range width may vary depending on how the market is volatile. It is up to the users to trade if it fits their trading strategies Dots plotted above and below can be assumed as Support and Resistance levels Example usages – with trading opportunities Gold Monthly Chart Bitcoin Daily Chart Disclaimer: Trading success is all about following your trading strategy and the indicators should fit within your trading strategy, and not to be traded upon solely The script is for informational and educational purposes only. Use of the script does not constitute professional and/or financial advice. You alone have the sole responsibility of evaluating the script output and risks associated with the use of the script. In exchange for using the script, you agree not to hold dgtrd TradingView user liable for any possible claim for damages arising from any decision you make based on use of the script
Indicador Pine Script™
por dgtrd
71
Profit Maximizer StrategyFirst I would like to thank to @KivancOzbilgic for developing this indicator. All the credit goes to him. I just created a strategy, in order to try to find the perfect parameters, timeframe and currency for it. I will provide below the same description like he has in the publish of profit maximizer Profit Maximizer - PMax combines the powerful sides of MOST (Moving Average Trend Changer) and SuperTrend (ATR price detection) in one indicator. Backtest and optimization results of PMax are far better when compared to its ancestors MOST and SuperTrend. It reduces the number of false signals in sideways and give more reliable trade signals. PMax is easy to determine the trend and can be used in any type of markets and instruments. It does not repaint. The first parameter in the PMax indicator set by the three parameters is the period/length of ATR. The second Parameter is the Multiplier of ATR which would be useful to set the value of distance from the built in Moving Average. I personally think the most important parameter is the Moving Average Length and type. PMax will be much sensitive to trend movements if Moving Average Length is smaller. And vice versa, will be less sensitive when it is longer. As the period increases it will become less sensitive to little trends and price actions. In this way, your choice of period, will be closely related to which of the sort of trends you are interested in. We are under the effect of the uptrend in cases where the Moving Average is above PMax; conversely under the influence of a downward trend, when the Moving Average is below PMax. Built in Moving Average type defaultly set as EMA but users can choose from 8 different Moving Average types like: SMA : Simple Moving Average EMA : Exponential Movin Average WMA : Weighted Moving Average TMA : Triangular Moving Average VAR : Variable Index Dynamic Moving Average aka VIDYA WWMA : Welles Wilder's Moving Average ZLEMA : Zero Lag Exponential Moving Average TSF : True Strength Force Tip: In sideways VAR would be a good choice You can use PMax default alarms and Buy Sell signals like: 1- BUY when Moving Average crosses above PMax SELL when Moving Average crosses under PMax 2- BUY when prices jumps over PMax line. SELL when prices go under PMax line.
Estratégia Pine Script™
por SoftKill21
15
Supertrend (MTF) & Parabolic SAROne of my mixed approach strategy indicators which includes: - Parabolic SAR - 1 Hour Supertrend - 4 Hour Supertrend Whilst this script may appear slow due to the 4hr Supertrend, it does a great job of managing breakouts. Using this indicator is simple, if the line labeled Lifetime is green then buy, if red then sell OR don't trade. So... Green Line - This strategy is in a buy position Red Line - This strategy is in a sell position Any other Color - DON'T TRADE The traders approach is simple, when all indicators are green or red, then take the trade. As soon as one indicator changes, then re-evaluate using your normal process, such as price action, to determine whether to close the trade or continue. If you require any further information or script modifications, please message me. PLEASE CHECK OUT MY OTHER SCRIPTS
Indicador Pine Script™
por ForexResearchLabs
11
Ichimoku & Supertrend Combined StrategyOne of my mixed approach strategy indicators which include's: - Ichimoku using much faster settings. (ECC-11) - Supertrend Whilst both Supertrend and Ichimoku are quite reliable, they do sometimes provide false signals. By combining both indicators, trading when both agree, it reduces the number of false alerts. Using this indicator is simple. If the lifetime line is green then buy. If red then sell and when black don't trade. So... Green Line - This strategy is in a buy position Red Line - This strategy is in a sell position Black Line - DON'T TRADE The trader's approach is simple, when all indicators are green or red, then take the trade. As soon as one indicator changes, then re-evaluate using your normal process, such as price action, to determine whether to close the trade or continue. There are also some alerts for opening and closing positions. If you wish to make some changes or discuss, please don't hesitate to message me.
Indicador Pine Script™
por ForexResearchLabs
6
Multi StrategyDuring the course of a trade, we can find ourselves changing strategies depending on the market. Instead of using many different templates, I have a simple indicator that clearly says "Buy", "Sell" or "Stay Out". The great thing about this approach, is we instantly observe the majority are in agreement and that decides which way to place our trade. This indicator includes the following strategies: - QQE - Ichimoku using much faster settings. - Parabolic SAR - Supertrend - TTM Oscillator - The Squeeze strategy - The Alligator Strategy Using this indicator is simple, if the lines are mainly green then buy, if mainly red then sell OR don't trade. So... Green Line - This strategy is in a buy position Orange or Black Line - This strategy is undecided Red Line - This strategy is in a sell position There are also some green and red circles for reference that appear showing when that bar has broken through the Ichimoku cloud. The trader's approach is simple, when all indicators are green or red, then take the trade. As soon as one indicator changes, then re-evaluate using your normal process, such as price action, to determine whether to close the trade or continue. I can customise this further or add other strategies, please message me.
Indicador Pine Script™
por ForexResearchLabs
14
PMax Explorer STRATEGY & SCREENERProfit Maximizer - PMax Explorer STRATEGY & SCREENER screens the BUY and SELL signals (trend reversals) for 20 user defined different tickers in Tradingview charts. Simply input the name of the ticker in Tradingview that you want to screen. Terminology explanation: Confirmed Reversal: PMax reversal that happened in the last bar and cannot be repainted. Potential Reversal: PMax reversal that might happen in the current bar but can also not happen depending upon the timeframe closing price. Downtrend: Tickers that are currently in the sell zone Uptrend: Tickers that are currently in the buy zone Screener has also got a built in PMax indicator which users can confirm the reversals on graphs. Screener explores the 20 tickers in current graph's time frame and also in desired parameters of the SuperTrend indicator. Also you can optimize the parameters manually with the built in STRATEGY version. PMax indicator : Profit Maximizer - PMax is a brand new indicator developed by me. It's a combination of two trailing stop loss indicators; One is Anıl Özekşi's MOST (Moving Stop Loss) Indicator and the other one is well known ATR based SuperTrend Profit Maximizer - PMax tries to solve this problem. PMax combines the powerful sides of MOST (Moving Average Trend Changer) and SuperTrend (ATR price detection) in one indicator. Backtest and optimization results of PMax are far better when compared to its ancestors MOST and SuperTrend. It reduces the number of false signals in sideways and give more reliable trade signals. PMax is easy to determine the trend and can be used in any type of markets and instruments. It does not repaint. The first parameter in the PMax indicator set by the three parameters is the period/length of ATR. The second Parameter is the Multiplier of ATR which would be useful to set the value of distance from the built in Moving Average. I personally think the most important parameter is the Moving Average Length and type. PMax will be much sensitive to trend movements if Moving Average Length is smaller. And vice versa, will be less sensitive when it is longer. As the period increases it will become less sensitive to little trends and price actions. In this way, your choice of period, will be closely related to which of the sort of trends you are interested in. We are under the effect of the uptrend in cases where the Moving Average is above PMax; conversely under the influence of a downward trend, when the Moving Average is below PMax. Built in Moving Average type defaultly set as EMA but users can choose from 8 different Moving Average types like: SMA : Simple Moving Average EMA : Exponential Movin Average WMA : Weighted Moving Average TMA : Triangular Moving Average VAR : Variable Index Dynamic Moving Average aka VIDYA WWMA : Welles Wilder's Moving Average ZLEMA : Zero Lag Exponential Moving Average TSF : True Strength Force Tip: In sideways VAR would be a good choice You can use PMax default alarms and Buy Sell signals like: 1- BUY when Moving Average crosses above PMax SELL when Moving Average crosses under PMax 2- BUY when prices jumps over PMax line. SELL when prices go under PMax line.
Estratégia Pine Script™
por KivancOzbilgic
113
Profit Maximizer PMaxPMax is a brand new indicator developed by KivancOzbilgic in earlier 2020. It's a combination of two trailing stop loss indicators; One is Anıl Özekşi's MOST (Moving Stop Loss) Indicator and the other one is well known ATR based SuperTrend. Both MOST and SuperTrend Indicators are very good at trend following systems but conversely their performance is not bright in sideways market conditions like most of the other indicators. Profit Maximizer - PMax tries to solve this problem. PMax combines the powerful sides of MOST (Moving Average Trend Changer) and SuperTrend (ATR price detection) in one indicator. Backtest and optimization results of PMax are far better when compared to its ancestors MOST and SuperTrend. It reduces the number of false signals in sideways and give more reliable trade signals. PMax is easy to determine the trend and can be used in any type of markets and instruments. It does not repaint. The first parameter in the PMax indicator set by the three parameters is the period/length of ATR. The second Parameter is the Multiplier of ATR which would be useful to set the value of distance from the built in Moving Average. I personally think the most important parameter is the Moving Average Length and type. PMax will be much sensitive to trend movements if Moving Average Length is smaller. And vice versa, will be less sensitive when it is longer. As the period increases it will become less sensitive to little trends and price actions. In this way, your choice of period, will be closely related to which of the sort of trends you are interested in. We are under the effect of the uptrend in cases where the Moving Average is above PMax; conversely under the influence of a downward trend, when the Moving Average is below PMax. Built in Moving Average type defaultly set as EMA but users can choose from 8 different Moving Average types like: SMA : Simple Moving Average EMA : Exponential Movin Average WMA : Weighted Moving Average TMA : Triangular Moving Average VAR : Variable Index Dynamic Moving Average aka VIDYA WWMA : Welles Wilder's Moving Average ZLEMA : Zero Lag Exponential Moving Average TSF : True Strength Force Tip: In sideways VAR would be a good choice You can use PMax default alarms and Buy Sell signals like: 1- BUY when Moving Average crosses above PMax SELL when Moving Average crosses under PMax 2- BUY when prices jumps over PMax line. SELL when prices go under PMax line.
Indicador Pine Script™
por KivancOzbilgic
93
Ichimoku Kinko Hyo and moreI am publishing my updated Ichimoku ++ study with a more suitable title. Future updates will take place with this version. Description: The intention of this script is to build/provide a kind of work station / work bench for analysing markets and especially Bitcoin . Another goal is to get maximum market information while maintaining a good chart overview. A chart overloaded with indicators is useless because the structure of the chart is more difficult to see. The chart should be clear and market structure should be easy to see. The script allows you to add indicators and signals in different visualizations to better assess the quality of signals and the sentiment of the market. A general advise: Use the included indicators and signals in a confluent way to get stoploss, buy and sell entry points. SR clusters can be identified for use in conjunction with Fractals and other indicators as entry and exit pints. My other scripts can also help. Prefer 4 hours, daily and a longer time frame. There is no "Holy Grail" :).
Indicador Pine Script™
por ramsay09
3
SuperTrend EXPLORER / SCREENERSUPERTREND EXPLORER / SCREENER screens the BUY and SELL signals (trend reversals) for 38 user defined different tickers in Tradingview charts. Simply input the short name of the ticker in Tradingview that you want to screen. Script is derived from zzzcrypto123 's work. Thanks for the permission letting me to use his logic. Terminology explanation: Confirmed Reversal: Supertrend reversal that happened in the last bar and cannot be repainted. Potential Reversal: Supertrend reversal that might happen in the current bar but can also not happen depending upon the timeframe closing price. Screener has also got a built in SuperTrend indicator which users can confirm the reversals on graphs. Screener explores the 38 tickers in current graph's time frame and also in desired parameters of the SuperTrend indicator. SUPERTREND INDICATOR: STRATEGY version of SuperTrend Indicator: SuperTrend is one of the most common ATR based trailing stop indicators. In this version you can change the ATR calculation method from the settings. Default method is RMA, when the alternative method is SMA . The indicator is easy to use and gives an accurate reading about an ongoing trend. It is constructed with two parameters, namely period and multiplier. The default values used while constructing a superindicator are 10 for average true range or trading period and three for its multiplier. The average true range (ATR) plays an important role in 'Supertrend' as the indicator uses ATR to calculate its value. The ATR indicator signals the degree of price volatility . The buy and sell signals are generated when the indicator starts plotting either on top of the closing price or below the closing price. A buy signal is generated when the ‘Supertrend’ closes above the price and a sell signal is generated when it closes below the closing price. It also suggests that the trend is shifting from descending mode to ascending mode. Contrary to this, when a ‘Supertrend’ closes above the price, it generates a sell signal as the colour of the indicator changes into red. A ‘Supertrend’ indicator can be used on equities, futures or forex, or even crypto markets and also on daily, weekly and hourly charts as well, but generally, it fails in a sideways-moving market. Source function added to use the indicator as the ATR Trailing Stop indicator. Just change source type hl2 to close. different variations might be useful.
Indicador Pine Script™
por KivancOzbilgic
71
SuperTrend STRATEGYSTRATEGY version of SuperTrend Indicator: SuperTrend is one of the most common ATR based trailing stop indicators. In this version you can change the ATR calculation method from the settings. Default method is RMA, when the alternative method is SMA . The indicator is easy to use and gives an accurate reading about an ongoing trend. It is constructed with two parameters, namely period and multiplier. The default values used while constructing a superindicator are 10 for average true range or trading period and three for its multiplier. The average true range (ATR) plays an important role in 'Supertrend' as the indicator uses ATR to calculate its value. The ATR indicator signals the degree of price volatility . The buy and sell signals are generated when the indicator starts plotting either on top of the closing price or below the closing price. A buy signal is generated when the ‘Supertrend’ closes above the price and a sell signal is generated when it closes below the closing price. It also suggests that the trend is shifting from descending mode to ascending mode. Contrary to this, when a ‘Supertrend’ closes above the price, it generates a sell signal as the colour of the indicator changes into red. A ‘Supertrend’ indicator can be used on equities, futures or forex, or even crypto markets and also on daily, weekly and hourly charts as well, but generally, it fails in a sideways-moving market. Source function added to use the indicator as the ATR Trailing Stop indicator. Just change source type hl2 to close. different variations might be useful.
Estratégia Pine Script™
por KivancOzbilgic
112
Supertrend Screener LABELThis screens for Supertrend reversal's in 10 different securities. The main logic for the screener is taken from "Simple Custom Screener in Pinescript" by QuantNomad with his permission. If the label color is not visible due to the text in it being white colored, then choose a different color from settings. Also added a simple supertrend to it. Terminology explanation: Confirmed Reversal: Supertrend reversal that happened in the last bar and cannot be repainted. Potential Reversal: Supertrend reversal that might happen in the current bar but can also not happen depending upon the timeframe closing price. Uptrend/Downtrend : Shows all the tickers that are either currently in uptrend or downtrend.
Indicador Pine Script™
por zzzcrypto123
24
Trends & RangesTrends & Ranges uses EMA ATR bands as a SuperTrend indicator. How to use: This indicator can be used to give you a direction bias, with the added function to create ranges which often lead to reversals or flat trading periods. Trade the break-out or wait for pull backs in the direction of the trend. I'm not great at explaining stuff and will probably make things only more complicated, so I won't bother for now, but if you have a question on how the script works I will gladly give it a try. The option "Flexible Trends" will disable the min/max function (trailing or non trailing). Flexible Trends enabled: Flexible Trends disabled: Settings are not optimized for any asset or time frame, you will have to do that for yourself. Feel free to share them in the comments. Thanks for showing interest, enjoy and good luck! :)
Indicador Pine Script™
por EvoCrypto
18
超级趋势（Supertrend）指标This is a normal Supertrend indicator which redesign and translate for Chinese. 这是一个通用的超级趋势（Supertrend）指标。 本脚本的目的在于帮助使用中文的人了解该指标，特别是其用法。同时将该指标代码添加完整的中文注释，方便使用中文的人学习Pine语言。 超级趋势指标（SuperTrend）是最常见的基于ATR的指标之一。 本指标的特色 相对于标准的超级趋势指标，在此版本中，你可以从设置中更改ATR计算方法。ATR的默认计算方式是采用RMA（RSI中使用的移动平均线，称之为指数加权移动平均线），本版本中可以使用SMA来替代计算ATR。 默认设置项为勾选状态，即ATR的计算方式为标准的RMA。 指标可调节参数 该指标有两个可设置的参数 1 ATR参数：默认为10； 2 ATR乘数：默认为3。 本指标还有两项可选设置项 1 价格源：价格源默认使用收盘价，但是你还可以选择使用开盘价、最高价、最低价等其他的价格计算方式； 指标用法 超级趋势指标出现在价格之上或价格之下时，就会产生买入和卖出信号。 买入信号： 当超级趋势指标在价格下方绘制时，即图表中的绿色信号线开始出现时，则产生买入信号；同时超级趋势指标的买入信号线可以作为买入的止损点； 卖出信号： 当超级趋势指标在价格上方绘制时，即图表中的红色信号线开始出现时，则产生卖出信号；同时超级趋势指标的卖出信号线可以作为卖出的止损点。 本指标支持配置买卖点的预警。 指标优势 1 适用于不同的时间周期和不同的交易品种； 2 对趋势有很好的识别效应； 3 可以提供明确的止损价位参考。 指标局限性 与其他趋势指标类似，超级趋势指标的作用在于帮助你抓住大趋势，但是在震荡行情，特别是长期的震荡行情中会失真，此时若按照超级趋势指标交易，则会产生亏损。
Indicador Pine Script™
por samuelx
21
CPR with SMA, EMA, VWAP & Super Trend by GuruprasadMeduriThis script will allow to add CPR with Standard Pivots and 4 Indicators. Standard Pivot has 9 levels of support and 9 levels of resistance lines. It has CPR , 3 levels of Day-wise pivots , 3 levels of Weekly pivots and 3 Levels of Monthly Pivots . In Addition to the CPR and Pivot, this script will allow user to Add 4 more Indicators - SMA, EMA, VWAP and SuperTrend as well. All the Support and resistance levels can be enabled / disabled from settings. It will allow to select multiple combinations of support and resistance levels across 3 levels at any of the 3 time-frames individually and combined. All 4 Indicators can be can be enabled / disabled from settings. This will allow the indicators to be plotted individually and combined along with any combination of CPR & Pivots. These number of combinations will allow user to visualize the charts with desired indicators, pivot support & resistance levels on all or any of the 3 time frames. For Ease of access, listed few points on how the script works.. - CPR and day-wise level 1 & 2 (S1 & R1) enabled by default and can be changed from settings - Day-wise Level 2 & 3 (S2, R2, S3 & L3) can be enabled from settings - Weekly 3 levels and Monthly 3 levels can be enabled from settings - CPR & pivot levels colored in blue lines - All support levels colored in Green - All resistance levels Colored in Red - Day-wise pivot , support & resistance are straight lines - Weekly pivot , support & resistance are cross (+) lines - Weekly pivot , support & resistance are circle (o) lines - SMA, EMA, VWAP and SuperTrend Enabled by Default - SMA Colored in Orange - EMA Colored in Red - EMA Colored in Teal - SuperTrend Colored in standard Red & Green with triangle arrows - Any combinations can be selected from settings-> Inputs & style
Indicador Pine Script™
por GuruprasadMeduri
67