Começar

Sizing

Live Position Sizer (LPS)Description (EN) (Magyar leíráshoz görgess lejjebb!) Live Position Sizer (LPS) is a discretionary trading utility designed to visualize risk, reward, and position size directly on the chart in real time. The indicator draws a TradingView-style long or short position box and calculates the required position size based on your defined capital, maximum risk, stop-loss distance, and a user-defined lot conversion factor. LPS is intended strictly as a decision-support and risk management tool. It does not place trades or generate automated signals. Core features: Automatic Long / Short position visualization Dynamic Entry, Stop Loss, and Take Profit levels Real-time position size calculation Configurable Risk/Reward ratio Fully customizable colors, transparency, and line styles Clean, minimal on-chart labels showing direction, RR, and lot size Only one active position box at a time for a clutter-free chart Position sizing logic: TradingView internally calculates position size in units, not broker-specific lots. To bridge this difference, LPS uses a user-defined “Units per 1 Lot” multiplier. Examples: Forex (standard lot): 100000 Gold (XAUUSD): 1 or 100 (broker dependent) Indices (e.g. NAS100): 1 The indicator first calculates the position size in TradingView units and then converts it to lots using this multiplier. The displayed lot size is rounded to 0.01 lots. Stop Loss logic: The Stop Loss level is derived from the High or Low of a selectable previous candle. Increasing the bar-back value places the Stop Loss further away, which: increases stop distance reduces position size for the same risk Intended use: Manual / discretionary trading Risk management and position sizing Trade planning and visualization Educational purposes Important notes: This indicator does not execute trades No alerts or automation by default Lot size and contract specifications vary by broker Always verify the exact lot or contract size with your broker before trading ------------------------------------ Description (HU) A Live Position Sizer (LPS) egy diszkrecionális kereskedést támogató segédindikátor, amely valós időben jeleníti meg a kockázatot, a célárat és a pozícióméretet közvetlenül a charton. Az indikátor TradingView-stílusú long vagy short pozíció boxot rajzol, és kiszámolja a szükséges pozícióméretet a megadott tőke, maximális kockázat, stop-loss távolság és egy felhasználó által definiált LOT szorzó alapján. Az LPS nem stratégia, kizárólag döntéstámogató és kockázatkezelési eszköz. Fő funkciók: Automatikus Long / Short pozíció megjelenítés Entry, Stop Loss és Take Profit szintek vizuális ábrázolása Valós idejű pozícióméret számítás Állítható Risk/Reward arány Teljesen testreszabható színek, átlátszóság és vonalstílus Letisztult chart label (irány, RR, lot méret) Egyszerre csak egy aktív pozíció box Pozícióméretezési logika: A TradingView belsőleg egységekben (units) számol, nem bróker-specifikus LOT-okban. Ennek kezelésére az LPS egy „Units per 1 Lot” beállítást használ. Példák: Forex standard lot: 100000 Arany (XAUUSD): 1 vagy 100 (brókertől függ) Indexek (pl. NAS100): 1 Az indikátor először TradingView egységekben számol, majd ezt átváltja LOT-ra a megadott szorzó segítségével. A kijelzett LOT méret 0.01-re van kerekítve. Stop Loss logika: A Stop Loss szint a kiválasztott korábbi gyertya high vagy low értékéből kerül meghatározásra. Nagyobb bar-back érték: távolabb helyezi a stopot azonos kockázat mellett kisebb pozícióméretet eredményez Ajánlott felhasználás: Manuális, diszkrecionális kereskedés Kockázatkezelés és pozícióméretezés Trade tervezés Oktatási célok Fontos megjegyzések: Az indikátor nem köt automatikusan Alapértelmezetten nincs alert vagy automatizmus A LOT és contract méret brókerenként eltérhet Kereskedés előtt mindig ellenőrizd a pontos LOT / contract specifikációt a brókerednél
Indicador Pine Script®
por mildZebra14333
Average True Range % infoATR% is a modified version of the classic Average True Range indicator that displays price volatility as a percentage of the instrument's value, rather than in absolute values. This allows you to easily compare the volatility of different assets (e.g., Bitcoin vs Tesla stock) regardless of their price. Main Features 1. ATR% Chart The red line shows the average volatility from the last N candles (default 14), expressed as a percentage. For example: ATR% = 2.5% means that the average daily move is approximately 2.5% of the asset's value Higher values = greater volatility (higher profit potential, but also greater risk) Lower values = lower volatility (calmer market) 2. Volatility Trend Analysis The indicator automatically detects whether volatility is rising, falling, or stable: Up arrow (↑) - volatility is rising (price becomes more "nervous") Down arrow (↓) - volatility is falling (market is calming down) Horizontal arrow (⮆) - volatility is stable (within ±3% of the moving average) 3. Information Table In the upper right corner of the chart you will see Current ATR% value and Trend arrow with color coding: - Green = rising volatility - Red = falling volatility - Gray = stable volatility Parameters to Configure Indicator Length (default: 14) - How many candles back to include in calculations: Lower values (5-10): more sensitive to sudden changes, reacts faster Higher values (20-30): more smoothed, shows long-term volatility picture Trend Length (default: 10) - Period to analyze whether volatility is rising/falling: Lower values: faster trend change signals Higher values: more reliable, but slower signals Sample Interpretations ATR% Volatility Asset Type/Situation < 1% Very low Stable blue-chip stocks, calm market 1-3% Low-medium Typical stocks, normal conditions 3-5% Medium-high Volatile stocks, cryptocurrencies at rest 5-10% High Cryptocurrencies, penny stocks > 10% Extremely high Market panic, crash, pump & dump
Indicador Pine Script®
por Jawortrader
Position Sizer (Share Qty) This indicator enables fast & accurate position sizing for traders using (user defined) fixed dollar risk, eliminating the need for manual calculations and supporting disciplined risk management directly on the chart Calculates precise share quantity for fixed-risk trades using the formula Shares = Risk Amount / (Current Price – Stop Price), rounded to the nearest whole share, updating in real time on every bar Offers two dynamic stop-loss options: Low of Day (LoD) — tracked only during Regular Trading Hours (9:30 AM – 4:00 PM ET) with automatic daily reset — or Low of Week (LoW) via weekly timeframe data Displays all critical trade data in a clean, customizable on-screen table showing: Risk Amount, Stop Loss type (LoD/LoW), Stop Price, and calculated Shares Qty Allows full table placement control with four corner positions with optional Top Offset and Bottom Offset (0–20 blank rows each) to prevent overlap with price action or other indicators Provides complete visual styling control for header text/background, value text/background, and share quantity text/background Ensures efficient rendering by recreating the table only when position, row count, or layout changes, deleting the prior instance to avoid flicker or memory issues Handles edge cases safely: shows 0 shares if stop is 'na' or above current price, and initializes LoD only on the first RTH bar of each session For use on equities only (table will not display on futures instruments) -- Future improvements: Visual Stop Loss line for either LoD or LoW Functionality and toggle to include Extended hours (PM /AH) for LoD stop pricing
Indicador Pine Script®
por CarpaccioTrades
Position Size ToolPosition Size Tool What it does: Shows a small on-chart table that converts per-ticker dollar amounts into share counts (shares = amount ÷ current price) for up to 4 configurable tickers. Inputs (indicator settings) Ticker 1–4 — select the symbol (TradingView will show the exchange-qualified form like BATS:TQQQ in the settings). Ticker N $ Amount — dollar amount to convert into shares for that ticker. Show Ticker N — toggle each row on/off. Table Text Color — color of the table text. Table Position — screen location (Top/ Middle/ Bottom × Left/Center/Right). Font Size — Small / Medium / Large. Show Empty Top Row — optional spacer row. What the table displays Left column: the ticker symbol only (the script strips the exchange prefix for display, so BATS:TQQQ appears as TQQQ in the table). Right column: the calculated share count, formatted to two decimal places (or "—" if price is not available or zero). Table updates on the chart’s timeframe using live/last bar prices. How to use Add the indicator to a chart. Open the indicator’s settings panel. In Ticker 1–4, type/select the symbols you want (you may see the exchange prefix there; that’s TradingView’s UI). Enter the dollar amounts for each ticker. Use Show Ticker N to hide/show rows. Adjust text color, font size, and table position as desired. Notes The settings field will always show the exchange-qualified symbol (TradingView behavior); the script strips the exchange only for the on-chart display. If the selected symbol has no price data on the chart/timeframe, the table shows "—". Shares are computed as amt ÷ current close from the requested symbol and timeframe. Example of how to use this tool: Monitor an index and execute trades on leveraged derivative products. This tool will determine the quantity of shares that can be purchased with a pre-determined dollar amount. Ex: Monitor SPX for entry/exit signals and execute trades on UPRO/SPXU/SPXL/SPXS. Input a ticker and a dollar amount for position size, shares that can be purchased will be calculated based on the current asset price. This tool can be helpful for those that use multiple platforms simultaneously to monitor and execute trades.
Indicador Pine Script®
por abbadon9
NQ Position Size CalculatorNQ Position Size Line Calculator is designed specifically for Nasdaq 100 futures (NQ) and micro futures (MNQ) traders who want to maintain disciplined risk management. This visual tool eliminates the guesswork from position sizing by displaying distance lines and contract calculations directly on your chart. The indicator creates horizontal lines at 10-tick intervals from your stop loss level, showing you exactly how many contracts to trade at each distance to maintain your predetermined risk amount. Whether you're trading regular NQ contracts or micro MNQ contracts, this calculator ensures you never risk more than intended while providing instant visual feedback for optimal position sizing decisions. How to Use the Indicator Step 1: Configure Your Settings Stop Loss Price: Enter your exact stop loss level (e.g., 20000.00) Risk Amount ($): Set your maximum dollar risk per trade (e.g., $500) Contract Type: Choose between: NQ (Regular): $5 per tick - for larger accounts MNQ (Micro): $0.50 per tick - for smaller accounts or conservative sizing Display Options: Max Lines: Number of distance lines to show (default: 30) Show Labels: Toggle tick distance and contract count labels Line Color: Customize the color of distance lines Label Size: Choose tiny, small, or normal label sizes Step 2: Read the Visual Display Once configured, the indicator displays: Stop Loss Line: Thick yellow line marking your exact stop loss level Yellow label showing the stop loss price Distance Lines: Dashed red lines at 10-tick intervals above and below your stop loss Lines appear on both sides for long and short position planning Labels (if enabled): Green labels (right side): For long positions above your stop loss Red labels (left side): For short positions below your stop loss Format: "20T 5x" means 20 ticks distance, 5 contracts maximum Step 3: Use the Information Tables The indicator provides two helpful tables: Position Size Table (top-right): Shows common tick distances (10, 20, 40, 80, 160 ticks) Displays risk per contract at each distance Contract count for your specified risk amount Total risk with rounded contract numbers Settings Table (bottom-right): Confirms your current risk amount Shows selected contract type Displays current settings for quick reference Step 4: Apply to Your Trading For Long Positions: Look at the green labels on the right side of your chart Find your desired entry level Read the label to see: distance in ticks and maximum contracts Example: "30T 8x" = 30 ticks from stop, buy 8 contracts maximum For Short Positions: Look at the red labels on the left side of your chart Find your desired entry level Read the label for tick distance and contract count Example: "40T 6x" = 40 ticks from stop, sell 6 contracts maximum Step 5: Trading Execution Before Entering a Trade: Identify your stop loss level and input it into the indicator Choose your entry point by looking at the distance lines Note the contract count from the corresponding label Verify the risk amount matches your trading plan Execute your trade with the calculated position size Risk Management Features: Contract rounding: All position sizes are rounded down (never up) to ensure you don't exceed your risk limit Zero position filtering: Lines only show where position size is at least 1 contract Dual-sided display: Plan both long and short opportunities simultaneously
Indicador Pine Script®
por birdmanx
2
NQ/MNQ Position Sizing Despite having my own position sizing calculator in an excel sheet, the manual process of having to identify my next trade, switch tabs/screens, input my values into the sheet, go back into TV, input the trade parameters with appropriate contract sizing, has always really gotten to me. I also found that I would often miss ideal entries due to the delay this caused. I searched TV for position sizing calculators but almost all the ones I found seemed to be similar: based on some form of manual input for the entry and stop parameters, many of which had way more settings and parameters than I needed, also over complicated things. I just needed something that would allow me to dynamically set my entry and stop levels directly on the chart, and spit out the appropriate contracts I should be using, either on NQ or MNQ, to maintain my desired level of risk, so I could quickly execute the necessary trade. So, I coded my own and it's been a huge help to me already, so I thought I may as well publish the script as can't imagine there aren't others out there that also hate the manual data entry process of calculating risk. Upon first load, the script will ask you to set your Entry and Stop levels, before drawing respective lines for these on the chart, and calculating contract sizing based on your risk settings, which you can update directly. The reset values may be buggy, will be easier to just remove the script and re-apply it to your chart if you ever lose track of the levels you've set. Hope it's useful.
Indicador Pine Script®
por CryptoGon93
2
RiskCalc FX & GoldRiskCalc FX & Gold is a multi-market position sizing tool designed to help you manage risk quickly and accurately. With this script, simply enter your account capital, the percentage of risk you wish to take, and your stop in ticks. Depending on the selected market—Forex or XAUUSD—the script automatically adjusts its calculations: Forex: Assumes 1 lot equals 100,000 units. XAUUSD: Assumes 1 lot equals 100 ounces. The script calculates your risk in dollars and, using a fixed value of 1 USD per tick per lot, determines the ideal position size in both lots and total contracts. Results are displayed in a clear, centralized table at the top of the chart for real-time decision-making. Perfect for traders operating across multiple markets who need an automated and consistent approach to risk management.
Indicador Pine Script®
por PoPeyGroupinc
ATR Bands with ATR Cross + InfoTableOverview This Pine Script™ indicator is designed to enhance traders' ability to analyze market volatility, trend direction, and position sizing directly on their TradingView charts. By plotting Average True Range (ATR) bands anchored at the OHLC4 price, displaying crossover labels, and providing a comprehensive information table, this tool offers a multifaceted approach to technical analysis. Key Features: ATR Bands Anchored at OHLC4: Visual representation of short-term and long-term volatility bands centered around the average price. OHLC4 Dotted Line: A dotted line representing the average of Open, High, Low, and Close prices. ATR Cross Labels: Visual cues indicating when short-term volatility exceeds long-term volatility and vice versa. Information Table: Displays real-time data on market volatility, calculated position size based on risk parameters, and trend direction relative to the 20-period Smoothed Moving Average (SMMA). Purpose The primary purpose of this indicator is to: Assess Market Volatility: By comparing short-term and long-term ATR values, traders can gauge the current volatility environment. Determine Optimal Position Sizing: A calculated position size based on user-defined risk parameters helps in effective risk management. Identify Trend Direction: Comparing the current price to the 20-period SMMA assists in determining the prevailing market trend. Enhance Decision-Making: Visual cues and real-time data enable traders to make informed trading decisions with greater confidence. How It Works 1. ATR Bands Anchored at OHLC4 Average True Range (ATR) Calculations Short-Term ATR (SA): Calculated over a 9-period using ta.atr(9). Long-Term ATR (LA): Calculated over a 21-period using ta.atr(21). Plotting the Bands OHLC4 Dotted Line: Plotted using small circles to simulate a dotted line due to Pine Script limitations. ATR(9) Bands: Plotted in blue with semi-transparent shading. ATR(21) Bands: Plotted in orange with semi-transparent shading. Overlap: Bands can overlap, providing visual insights into changes in volatility. 2. ATR Cross Labels Crossover Detection: SA > LA: Indicates increasing short-term volatility. Detected using ta.crossover(SA, LA). A green upward label "SA>LA" is plotted below the bar. SA < LA: Indicates decreasing short-term volatility. Detected using ta.crossunder(SA, LA). A red downward label "SA LA, then the market is considered volatile. Display: Shows "Yes" or "No" based on the comparison. b. Position Size Calculation Risk Total Amount: User-defined input representing the total capital at risk. Risk per 1 Stock: User-defined input representing the risk associated with one unit of the asset. Purpose: Helps traders determine the appropriate position size based on their risk tolerance and current market volatility. c. Is Price > 20 SMMA? SMMA Calculation: Calculated using a 20-period Smoothed Moving Average with ta.rma(close, 20). Logic: If the current close price is above the SMMA, the trend is considered upward. Display: Shows "Yes" or "No" based on the comparison. How to Use Step 1: Add the Indicator to Your Chart Copy the Script: Copy the entire Pine Script code into the TradingView Pine Editor. Save and Apply: Save the script and click "Add to Chart." Step 2: Configure Inputs Risk Parameters: Adjust the "Risk Total Amount" and "Risk per 1 Stock" in the indicator settings to match your personal risk management strategy. Step 3: Interpret the Visuals ATR Bands Width of Bands: Wider bands indicate higher volatility; narrower bands indicate lower volatility. Band Overlap: Pay attention to areas where the blue and orange bands diverge or converge. OHLC4 Dotted Line Serves as a central reference point for the ATR bands. Helps visualize the average price around which volatility is measured. ATR Cross Labels "SA>LA" Label: Indicates short-term volatility is increasing relative to long-term volatility. May signal potential breakout or trend acceleration. "SA 20 SMMA? Use this to confirm trend direction before entering or exiting trades. Practical Example Imagine you are analyzing a stock and notice the following: ATR(9) Crosses Above ATR(21): A green "SA>LA" label appears. The info table shows "Yes" for "Is ATR-based price volatile." Position Size: Based on your risk parameters, the position size is calculated. Price Above 20 SMMA: The info table shows "Yes" for "Is price > 20 SMMA." Interpretation: The market is experiencing increasing short-term volatility. The trend is upward, as the price is above the 20 SMMA. You may consider entering a long position, using the calculated position size to manage risk. Customization Colors and Transparency: Adjust the colors of the bands and labels to suit your preferences. Risk Parameters: Modify the default values for risk amounts in the inputs. Moving Average Period: Change the SMMA period if desired. Limitations and Considerations Lagging Indicators: ATR and SMMA are lagging indicators and may not predict future price movements. Market Conditions: The effectiveness of this indicator may vary across different assets and market conditions. Risk of Overfitting: Relying solely on this indicator without considering other factors may lead to suboptimal trading decisions. Conclusion This indicator combines essential elements of technical analysis to provide a comprehensive tool for traders. By visualizing ATR bands anchored at the OHLC4, indicating volatility crossovers, and providing real-time data on position sizing and trend direction, it aids in making informed trading decisions. Whether you're a novice trader looking to understand market volatility or an experienced trader seeking to refine your strategy, this indicator offers valuable insights directly on your TradingView charts. Code Summary The script is written in Pine Script™ version 5 and includes: Calculations for OHLC4, ATRs, Bands, SMMA: Uses built-in functions like ta.atr() and ta.rma() for calculations. Plotting Functions: plotshape() for the OHLC4 dotted line. plot() and fill() for the ATR bands. Crossover Detection: ta.crossover() and ta.crossunder() for detecting ATR crosses. Labeling Crossovers: label.new() to place informative labels on the chart. Information Table Creation: table.new() to create the table. table.cell() to populate it with data. Acknowledgments ATR and SMMA Concepts: Built upon standard technical analysis concepts widely used in trading. Pine Script™: Leveraged the capabilities of Pine Script™ version 5 for advanced charting and analysis. Note: Always test any indicator thoroughly and consider combining it with other forms of analysis before making trading decisions. Trading involves risk, and past performance is not indicative of future results. Happy Trading!
Indicador Pine Script®
por gpsintown
Scaled Order Sizing and Take Profit Target ArraysWOAH Order Scaling! This Provides a user with methods to create a list of profit targets and order sizes which grow or shrink. For size, the will add up to specific sum. for Targets they will include the first and last, and can lean towards either, to scale the order grid. And thanks to @Hoanghetti for the markdown, i've included a basic usage example within the hover , o you don't need to search for the usage example, simply import, and when writing, the code hint contains a full example. scaled_sizes(total_size, count, weight, min_size, as_percent) create an array of sizes which grow or shrink from first to last which add up to 1.0 if set the as_percent flag , or a total value / sum.   Parameters:      total_size : (float) total size to divide ito split      count : (int ) desired number of splits to create      weight : (float) a weight to apply to grow or shrink the split either towards the last being most, or the first being most, or 1.0 being each is equally sized as 1/n count      min_size : (float) a minimum size for the smallest value (in value of ttotal_size units)      as_percent : (float) a minimum size for the smallest value (in value of total_size units)   Returns: Array of Sizes for each split scaled_targets(count, weight, minimum, maximum) create a list of take profitt targets from the smallest to larget distance   Parameters:      count : (int ) number of targets      weight : (float) weight to apply to growing or shrinking      minimum : (float) first value of the output      maximum : (float) last value of the output   Returns: Array of percentage targets
Biblioteca Pine Script®
por kaigouthro
7
Position Sizing w/ ADR&ATR TrackingScript to use for position sizing based on portfolio size, max position, and max loss inputs. The option to use custom entry and stop are available, but default to last price for entry, and Low of Day (LoD) for stop. The ATR % is a measure of the low of day to current price as a percentage move. Credit to LonesomeTheBlue for the base code on position sizing and TheScrutiniser/GlinckEastwoot for ADR formula -Nelgoth, best of luck
Indicador Pine Script®
por Nelgoth
4
Position Size Calculator - Fixed Dollar amount, point value ATRHello Traders, A very simple code aiming to help you size your position, according to the amount you're accepting to lose AND the current volatility ATR. Why is it important to use ATR size ? Markets move, and having fixed stoploss values will lead to getting stopped out in case of volatility increase. You also need to size down your trades in case of more volatily, as more points can be taken or lost. Hope it helps! Kudos to Racer9 who inspired me :
Indicador Pine Script®
por IFT-System
1
Minimum Average True RangeI use ATR a lot when designing trading strategies, this way the strategy adjusts to the instrument in most cases instead of me plugging in special numbers. However, ATR itself could get spiked by some violent moves. For this I have created MinATR which I am publishing here. It is effectively ATR + minimum ATR over the last "Min Length" bars. (this is a parameter which I have defaulted to 50). So use this the same way you use ATR, but it will also show the min ATR over the last "Min Length" periods.
Indicador Pine Script®
por asenski
9
Distribution Position Size Panel This panel is an example position size panel that I prepared and I consider the rates reasonable. I have prepared this panel so that the money allocated to the investment ends 14 consecutive signals. The sum of the ratios is 100 units. You can adjust your positions according to this panel. The first steps are low rates. If the phrases are strong, you can specify a position size from the lower digits. Likewise, when you make a big profit, you can empty your profits in the lower steps. In the event of a color change, you can return to the beginning or lower limit. NOTE: This script is an auxiliary command to the distribution blocks script, if you want to use another script, you can add distribution days to yours. 14 th stake does not appear in the preview, you need to reduce the size of the distribution blocks indicator slightly. Rafael Zioni's examples of the panels helped a lot, thanks to him. Stay tuned ! Regards , Noldo.
Indicador Pine Script®
por Noldo
Simplified SizingEnsure you Uncheck #1 , #2, #3 in the STYLE tab or it draws the lines you only need the numbers for. The first number is the deviation from the EMA , anything below 1.75 == 1. (less than 0.75 % deviation) NOTE: The fill area turns yellow @ 1.50 and red above 2.75 There are steps built in to slightly lower share size when specific levels of divergence register: From 1.75 to 10 , 1 == 1.10 (10% reduction) From 10 and up, 1 == 1.20 (20% reduction) The second number is the Average True Range , calculated by the input length (RMA smoothed) and a multiplier (in decimal form). NOTE: From 930-936 this value is multiplied by 1.5 The third number is the max share size. The 4th number is the lot price if you take a position at the max size. INPUTS: ATR Length EMA Length for divergence calculation ATR Multiplier (0.1 - 10) Equity in account Max loss per trade. Good Luck!
Indicador Pine Script®
por kmack282
Sizing GuideThis indicator helps you defining your max sizing, depending on the max $$$ amount you're willing to risk against a specific exponential moving average (or VWAP, default is the 13ema). You can define your max risk amount and your max allowed sizing. The indicator would suggest the best sizing in order to risk only up to the amount you are comfortable with on a potential trade. Moreover, the column bar would turn yellow/red if the divergence is above a certain threshold (default are yellow > 1.50% and red > 2.75%, green otherwise).
Indicador Pine Script®
por freedom_trader_
7