Começar

Pesquisar nos scripts por "liquidity"

Pip Spread to EMA TargetThis script calculates the total number of pips between current close and a target EMA. There are three thresholds that can be specified to determine when that total number of pip spread exceeds a standard deviation multiple set by user. Current standard deviation thresholds on pip spread are set to 2, 2.5 and 3. A pip spread that goes above 3 standard deviations is considered very extreme. The standard deviation is calculated across a predetermined set of bars. Currently look back period for standard deviation count is set to 3000.
Indicador Pine Script®
por LiquidityTracker
TQ's Support & Resistance(My goal creating this indicator): Provide a way to categorize and label key structures on multiple different levels so I can create a plan based on those observable facts. The Underlying Concept / What is Momentum? Momentum indicates transaction pressure. If the algorithm detects price is going up, that would be considered positive momentum. If the algorithm detects price is going down negative momentum would be detected. The Momentum shown is derived from a price action pattern. Unlike my previous Support & Resistance indicator that used Super Trend, this indicator uses a unique pattern I created. On the first bar bearish momentum is detected a resistance Level is made at the highest point of the previous bullish condition. On the first bar bullish momentum is detected a support Level is made at the lowest point of the previous bearish condition. This happens on 5 different Momentum Levels, (short-term to long-term). I currently use this pattern to trade so the source code is protected. What is Severity? Severity is How we differentiate the importance of different Highs and Lows. If Momentum is detected on a higher level the Supply or Demand Level is updated. The Color and Size representing that Level will be shown. Demand and Supply Levels made by higher levels are more SEVERE than a demand level made by a lower level. Technical Inputs - to ensure the correct calculation of Support and Resistance levels change BAR_INDEX. BAR_INDEX creates a buffer at the start of the chart. For example: If you set BAR_INDEX to 300. The script will wait for 300 bars to elapse on the current chart before running. This allows the script more time to gather data. Which is needed in order for our dynamic lookback length to never return an error (Dynamic lookback length can't be negative or zero). The lower the timeframe the greater the number of bars need. For Example, if I open up a 1min chart I would enter 5000 as my BAR_INDEX since that will provide enough data to ensure the correct calculation of Support and Resistance levels. If I was on a daily chart, I would enter a lower number such as 800. Don't be afraid to play around with this. - Toggle options (Close) or (High & Low) creates Support and Resistance Levels using the Lowest close and Highest close or using the Lowest low and Highest high. Level Inputs - The indicator has 5 Different Levels indicating SEVEREITY of a Supply and Demand Levels. The higher the Level the more SEVERE the Level. Display Inputs - You have the option to customize the Length, Width, Line Style, and Colors of all 5 different - This indicator includes a Trend Chart. To Easily verify the current trend of any displayed by this indicator toggle on Chart On/Off. You also get the option to change the Chart Position and the size of the Trend Chart How Trend Is being Determined? (Close > Current Supply Level) if this statement is true technically price made a HH, so the trend is bullish. (Close < Current Demand Level) if this statement is true technically price made a LL, so the trend is bearish. - Fully customize how you display Market Structure on different levels. Line Length, Line Width, Line Style, and Line color can all be customized. How it can be used? (Examples of Different ways you can use this indicator): Easily categorize the severity of each and every Supply or Demand Level in the market (The higher Level the stronger the level) : Quickly Determine the trend of any Level. : Get a consistent view of a market and how different Levels are behaving but just use one chart. : Take the discretion from hand drawing support and resistance lines out of your trading. : Find and categorize strong levels for potential breakouts. : Trend Analysis, use Levels to create a narrative based on observable facts from these Levels. : Different Targets to take money off the table. : Use Severity to differentiate between different trend line setups. : Find Great places to move your stop loss too.
Indicador Pine Script®
por Who7is7Like7God
3
Visible Range Support and Resistance [AlgoAlpha]🌟 Introducing the Visible Range Support and Resistance 🌟 Discover key support and resistance levels with the innovative "Visible Range Support and Resistance" indicator by AlgoAlpha! 🚀📈 This advanced tool dynamically identifies significant price zones based on the visible range of your chart, providing traders with crucial insights for making informed decisions. Key Features: Dynamic support and resistance levels based on visible chart range 📏 User-defined resolution for tailored analysis 🎯 Clear visual representation of significant key zones 🖼️ Easy integration with any trading strategy 💼 How to Use: 🛠 Add the Indicator : Add the indicator to favourites. Adjust settings like resolution and horizontal extension to suit your trading style. 📊 Market Analysis : Identify key support and resistance zones based on the highlighted areas. These zones indicate significant price levels where the market may react. How it Works: The indicator segments the price range into user-defined resolutions, analyzing the highest and lowest points to establish boundaries. It calculates the frequency of price action within these segments, highlighting key levels where price movements are least concentrated (areas where price tends to pivot). Customizable settings like resolution and horizontal extension allow for tailored analysis, while the intuitive visual representation makes it easy to spot potential support and resistance zones directly on your chart. By leveraging this indicator, you can gain deeper insights into market dynamics and improve your trading strategy with data driven support and resistance analysis. Happy trading! 💹✨
Indicador Pine Script®
por AlgoAlpha
5
Delta Magnet Zone Extended – Selective HideLiquidity Zone Reversal — Description 🔍📊 This indicator automatically identifies liquidity zones where price previously grabbed orders, swept highs/lows, or created strong reaction points. Instead of plotting thin lines, this version converts those levels into zones, giving traders a clearer view of where the market has unfinished business and where future reactions are likely to occur. These zones act as institutional magnets — areas where liquidity providers, algos, and larger players commonly enter or exit positions. How It Works ⚙️💡 The script scans recent price action and detects local swing highs and lows. It then builds rectangular liquidity zones around these levels, extending them forward so you can see: 🟥 Bearish liquidity sweep zones 🟩 Bullish liquidity sweep zones 🔁 Areas where price previously failed, rejected, or consolidated 🎯 Potential reversal targets on both sides of the market These zones update automatically as new structure forms, giving you an always-current map of market memory. Why the 9-Day Look-Back Is Powerful (My Default) 📅✨ I personally keep the look-back set to 9 days by default because: ✔️ It captures the entire previous trading week ✔️ It maps out where SPY/QQQ/ES has already tapped liquidity ✔️ It shows the true zones institutions defended ✔️ It reveals where price is most likely to react again moving forward Using a 9-day window gives you a clean, high-signal map of: Last week’s highs & lows Prior liquidity sweeps Rejection zones Imbalance cleanup levels This keeps the chart minimal, powerful, and hyper-relevant to current order flow. How Traders Use These Zones 🎯📈 Here are the most common ways traders use these liquidity zones: 1️⃣ Identify High-Probability Reversal Areas 🔄 Price often reacts strongly when returning to a past liquidity zone — especially if it previously swept stops there. 2️⃣ Confirm Breakouts or Failures 🚪➡️ Break above a bearish zone? Momentum continuation is likely. Reject inside a zone? Reversal or range expansion often follows. 3️⃣ Set Targets & Stop Placement 🎯🛡️ Zones give logical: Profit targets Trend exhaustion points Areas to avoid entering new trades 4️⃣ Time 0DTE Scalps With Precision ⚡ Liquidity zones tighten your expectations for: Where SPY/QQQ will bounce Where reversals start Where liquidity magnets pull price by end of day Why This Indicator Matters 🧠🔥 Liquidity drives markets. Not indicators. Not moving averages. Not random levels. This tool shows you where actual orders exist, where they were previously swept, and where institutions are most likely to step in again. It gives you: Cleaner charts Higher confidence Better strike selection More precise entries Stronger exits All without noise.
Indicador Pine Script®
por herose4the
Directional Pressure (maybexo)Liquidity Candles, observed in financial markets, display distinctive candlestick patterns that are noteworthy. These candles exhibit intentional price behavior aimed at triggering stop-loss orders and momentarily misleading traders. The pattern typically starts with a price movement against the current trend, activating stop-loss orders and capitalizing on liquidity from traders anticipating the prevailing trend. Subsequently, the price swiftly changes course, breaking and conclusively closing beyond the prior candle's range, often surprising unsuspecting traders. Characteristics: 1. Liquidity Grab: - Liquidity Candles initiate with a deliberate move against the existing trend, aimed at triggering stop-loss orders and gathering liquidity from traders who have placed stops in anticipation of the initial trend. - Notably, the size of the wick in this liquidity grab is significant; a larger wick indicates a more substantial liquidity grab and can strengthen the indication of a potential market reversal. 2. Swift Reversal and Breakout: - Following the liquidity grab, the price swiftly changes direction, breaking and conclusively closing above or below the previous candle's range. 3. Institutional Behavior: - These candles are often linked to institutional trading behavior, suggesting potential involvement by significant market participants due to their distinct and deliberate price action. // Diamonds 1. RSI Diamonds: The RSI Diamonds represent RSI entering either overbought or oversold levels. These Diamonds serve as an early indication for "Spooky Diamonds" as Spooky Diamonds can only form in these conditions 2. Spooky Diamonds: The Spooky Diamonds highlight specific candle conditions, aiding in the identification of bullish or bearish momentum in the market while considering the RSI status. Bullish Candle Momentum: The candle size is greater than the previous candle multiplied by a user-defined factor (filterMultiplier) and the closing price is higher than the opening price. This can suggest bullish momentum. Bearish Candle Momentum: The candle size is greater than the previous candle multiplied by the filterMultiplier, and the closing price is lower than the opening price. This can suggest bearish momentum. Important Notes: The Candles + Diamonds should not be used in isolation as buy or sell signals but rather as additional information for your trading strategy. The goal of this indicator is to provide a visual representation of RSI data and potential momentum during overbought or oversold conditions. By utilizing the diamonds and candles, you can easily identify RSI levels and their interaction with candles, aiding in decision-making within your trading strategy. Disclaimer: Always consider your risk tolerance and conduct thorough analysis before making any trading decisions. Inspiration Credits: Vanitati Mr. Casino
Indicador Pine Script®
por maybexo
🧠 Rogue BTC Dominance + BTC Price MonitorLiquidity never lies. When whales are done pumping, they exit before price tanks, often during sideways chop or fake strength. So we build a tracker that detects: Volume drop during uptrend (distribution phase) Exchange inflows of coins Rising USDT.D while price holds → stealth exit Divergence between price & on-chain flows 👁️ Quick Use Case: BTC/USDT with USDT.D Overlay If you see this pattern: BTC sideways or slow uptrend Volume declining USDT.D rising BTC.D holding flat → Liquidity Exit Detected. Smart money is exiting quietly, waiting for retail to hold the bag.
Indicador Pine Script®
por Spoiltbrat
Liquidity Fvg IdentifierDear Traders, This indicator is very effective and supports Price action Traders. Swing Identification This automatically Detect swings level and mark as per the chart Time frame. these lines can be used for support and resistance.This is represented by Yellow and Blue lines There is an option to put Higher time frame swing levels and these are represented by Green and Red Lines. Eg: if you are trading in 5 mins and you also want 1 hour swing levels , then you can get this by selecting higher time frame 1 hour and select both Chart and Htf in the option provided. Trade: If price is approaching where both Times frames swing lines are coinciding these levels act as strong Support and Resistance . You need to wait for proper price action to form and take Trades. FVG This also automatically detect Fare Value Gaps and mark as per the chart Time Frame. These can be used for reversal trades . This is represented buy purple blocks There is an option to put higher time frame FVG and these are represented by Red Blocks. Eg : if you are trading in 15 mins and you also want 4 hours FVG, then you can get this by selecting Higher time frame 4 hours and select both chart and HTF in the option provided. Trade: If price is approaching where both time frames FVG are coinciding , these box will act as strong support and reversal. wait for proper price action and trade can be taken. Volume Breakout. This will automatically detect and volume breakout of last 60 candles and plots below the candle. These can be adjusted in setting as per requirement. suppose you want for last 30 candles , you can select 30 and it will plot below candle when ever there is breakout. Trade: When ever volume breakout is coming near swing or fvg support or resistance , this can be considered to support reversal. Pls take your financial advisor suggesting before using taking trades . any suggestion reach to us thru message Thanks
Indicador Pine Script®
por culturalBear61294
Volume-Weighted Price MovementThe Volume-Weighted Price Movement (VWPM) indicator is an easy to read technical analysis tool that analyses how volume and price movement work together to drive market momentum. How It Works The VWPM indicator tracks two primary components: Bullish Movement (green line): Measures the upward price movement weighted by volume. When price closes above the open, this component calculates how much buying pressure exists by multiplying the price change (close - open) by the volume of that period. Bearish Movement (red line): Measures the downward price movement weighted by volume. When price closes below the open, this component calculates how much selling pressure exists by multiplying the price change (open - close) by the volume of that period. Bull-Bear Difference (lime/orange line): Shows the net momentum by subtracting bearish movement from bullish movement, providing an at-a-glance view of which force is dominant. The VWPM integrates volume data to identify whether price movements are backed by significant participation. A large price move with low volume carries less weight than the same move with high volume, providing a more accurate reflection of market strength. A shorter lookback period makes the indicator more responsive to recent price action, while a longer period smooths out market noise for trend identification. Interpretation Bullish Signals When the green line (bull movement) rises and stays above the red line When the Bull-Bear Difference line crosses above zero and maintains positive momentum Divergence between price making lower lows but the bull line making higher lows (hidden strength) Bearish Signals When the red line (bear movement) rises and stays above the green line When the Bull-Bear Difference line crosses below zero and maintains negative momentum Divergence between price making higher highs but the bull line making lower highs (hidden weakness) open source, if anyone makes the script better please let me know :)
Indicador Pine Script®
por Liquidity-Pulse
2
Liquidity Levels [LuxAlgo]The Peak Activity Levels indicator displays support and resistance levels from prices accompanied by significant volume. The indicator includes a histogram returning the frequency of closing prices falling between two parallel levels, each bin shows the number of bullish candles within the levels. 1. Settings Length: Lookback for the detection of volume peaks. Number Of Levels: Determines the number of levels to display. Levels Color Mode: Determines how the levels should be colored. "Relative" will color the levels based on their location relative to the current price. "Random" will apply a random color to each level. "Fixed" will use a single color for each level. Levels Style: Style of the displayed levels. Styles include solid, dashed, and dotted. 1.1 Histogram Show Histogram: Determines whether to display the histogram or not. Histogram Window: Lookback period of the histogram calculation. Bins Colors: Control the color of the histogram bins. 2. Usage The indicator can be used to display ready-to-use support and resistance. These are constructed from peaks in volume. When a peak occurs, we take the price where this peak occurred and use it as the value for our level. If one of the levels was previously tested, we can hypothesize that the level might be used as support/resistance in the future. Additional analysis using volume can be done in order to confirm a potential bounce. The histogram can return various information to the user. It can show if the price stayed within two levels for a long time and if the price within two levels was mostly made of bullish or bearish candles. In the chart above, we can see that over the most recent 200 bars (determined by Histogram Window) 68 closing prices fall between levels A and B, with 27 bars being bullish. Additionally, the width of a bin and its length can sometimes give information about the volatility of a specific price variation. If a bin is very wide but short (a low number of closing prices fallen within the levels) then we can conclude a most of the movement was done on a short amount of time.
Indicador Pine Script®
por LuxAlgo
26
Beast Mode PRO v4.0# Beast Mode PRO v4.0 - Advanced Multi-Regime Trading System ## Overview Beast Mode PRO v4.0 is a sophisticated technical analysis indicator designed for active traders seeking high-probability setups across multiple timeframes. This system combines machine learning-inspired clustering algorithms with traditional technical analysis to identify market regimes and generate precision entry signals. The indicator adapts to different trading styles through intelligent preset configurations and multiple trading modes. --- ## Core Methodology ### Signal Generation Framework The indicator employs a **multi-component voting system** that analyzes market conditions through several independent technical perspectives: **Technical Components:** - **RSI (Relative Strength Index)**: Momentum oscillator measuring overbought/oversold conditions - **Fisher Transform**: Price transformation technique that normalizes price distributions for clearer turning points - **DMI (Directional Movement Index)**: Trend strength indicator measuring directional pressure - **Z-Score Analysis**: Statistical measure identifying price deviations from historical norms - **Moving Average Ratio**: Price relationship to its moving average baseline - **MFI (Money Flow Index)**: Volume-weighted momentum indicator - **Stochastic Oscillator**: Momentum indicator comparing closing price to price range - **CCI (Commodity Channel Index)**: Measures current price level relative to average price level ### Clustering Engine The system utilizes a **k-means inspired clustering algorithm** that categorizes each technical indicator's normalized values into distinct market regimes (bullish, bearish, neutral). This approach: 1. **Normalizes** all indicators using z-score transformation over a historical lookback window 2. **Clusters** normalized values using percentile-based thresholds 3. **Aggregates** individual votes into a composite score ranging from -100 to +100 4. **Smooths** the composite score using selectable methods (SMA, EMA, WMA, HMA, TEMA, DEMA) The clustering percentiles adapt dynamically based on current market volatility (ATR-normalized), ensuring the system remains responsive across different market conditions. --- ## Trading Modes ### 1. Normal Mode Standard crossover-based signals using fixed thresholds (+10/-10). Suitable for balanced trading with moderate signal frequency. ### 2. Scalper Mode Dynamic threshold adjustment based on recent score volatility. Generates more frequent signals by adapting to short-term price movements. ### 3. Aggressive Mode Reversal-focused approach that triggers signals when the composite score crosses extreme levels (+80/-80), targeting major trend reversals. ### 4. Hybrid Mode Combines Normal and Aggressive signals, capturing both standard crossovers and extreme reversals for comprehensive market coverage. ### 5. Super Scalper Mode Ultra-responsive mode using signal line crossovers (14-period HMA of composite score) for maximum trade frequency. ### 6. Sniper Mode (Premium Feature) Multi-confirmation system requiring alignment of: - Composite score threshold breach - Positive fast momentum (10-period SMI) - Positive trend momentum (200-period SMI) - Price above/below smart trend filter MA This mode prioritizes precision over frequency, filtering out low-probability setups. --- ## Timeframe Presets Pre-optimized configurations for common trading timeframes: ### 1 Minute Preset - Fast smoothing (10-period WMA) - Tight chop filter (61.8 threshold) - Optimized for rapid scalping with minimal lag ### 2 Minute Preset - Balanced smoothing (12-period EMA) - Enhanced volume filtering - Moderate cooling period (5 bars) ### 3 Minute Preset - HMA smoothing for reduced lag - Stochastic and CCI enabled - Balanced approach for intraday trading ### 5 Minute Preset - TEMA smoothing for trend following - Stronger filters to reduce noise - Extended lookback (1000 bars) ### 15 Minute Preset - DEMA smoothing for swing positions - Maximum filtering configuration - All technical indicators enabled - Suitable for swing trading and position building Users can also select "Custom" to manually configure all parameters. --- ## Advanced Filtering System ### 1. Choppy Market Filter Uses Choppiness Index calculation to identify consolidating markets. When CI exceeds the threshold, signals are suppressed to avoid whipsaw trades. ### 2. Smart Trend Filter Configurable moving average (SMA/EMA/WMA/HMA/TEMA/DEMA/VWMA/RMA) that prevents counter-trend signals. Long signals require price above the MA, shorts require price below. ### 3. Volume Filter Compares current volume to its moving average. Signals are suppressed when volume falls below the specified multiplier of average volume. ### 4. ATR Volatility Filter Prevents trading during low volatility periods when ATR falls below its moving average multiplied by the specified factor. ### 5. Session Filter Time-based filtering for Asia, London, New York, or combined sessions. Ensures trading only during preferred market hours. ### 6. Multi-Timeframe Confirmation Optionally requires higher timeframe alignment before generating signals, adding confluence for higher probability trades. ### 7. Cooling Off Period Prevents signal clustering by enforcing a minimum number of bars between consecutive signals. --- ## Smart Money Concepts Integration ### Order Block Detection Identifies institutional supply/demand zones using multi-timeframe analysis: - Detects strong directional candles followed by breakout moves - Volume confirmation ensures significance - Customizable timeframe selection (current TF or higher TF: 5m, 15m, 30m, 1H, Daily) - Visual boxes mark active order blocks with automatic expiration after lookback period - Price interaction alerts when touching active zones ### Liquidity Zones Marks equal highs (EQH) and equal lows (EQL) where stop losses typically cluster, indicating potential reversal or breakout points. --- ## Momentum Analysis ### Fast Momentum (Default: 10-period) Short-term momentum oscillator using Stochastic Momentum Index (SMI) calculation. Provides early warning of momentum shifts. ### Trend Momentum (Default: 200-period) Long-term momentum gauge confirming overall trend direction. Used in Sniper Mode for multi-confirmation. ### Momentum Divergence Detection Automatically identifies: - **Regular Divergence**: Price makes new high/low but momentum doesn't (reversal signal) - **Hidden Divergence**: Price makes higher low/lower high but momentum doesn't (continuation signal) --- ## Visual Components ### Price Chart Overlay - **Smart Trend MA**: Dynamically colored moving average based on price position - **EMA Cloud**: 50/200 EMA cloud showing long-term trend (background shading) - **Trend Background**: Subtle background coloring based on composite score - **Order Block Boxes**: Institutional supply/demand zones - **Entry/Exit Markers**: Clear visual signals with emoji labels - **Liquidity Markers**: EQH/EQL identification ### Bar Coloring Bars change color based on active mode and market regime: - **Sniper Mode**: Purple (bull) / Pink (bear) - **Aggressive Mode**: Bright Green / Bright Red - **Super Scalper**: Neon Green / Neon Red - **Timeframe Presets**: Unique color schemes per preset - **Choppy/Neutral**: Always gray regardless of mode ### Oscillator Pane - **Composite Score Line**: Gradient-colored stepline showing current regime strength - **Fast/Trend Momentum**: Optional overlays (gold/cyan colors) - **Divergence Markers**: Visual alerts for regular, hidden, and momentum divergences - **Power Zones**: Overbought/oversold regions (80/-80 levels) - **Dynamic/Fixed Thresholds**: Visual reference lines based on active mode ### Interactive Dashboards **Main Dashboard** displays: - Active preset/mode configuration - Real-time indicator values and votes - Current market status (active/choppy/counter-trend/low volume/low ATR/MTF misalignment) - Regime classification (Strong Long/Long/Neutral/Short/Strong Short) - Smart Trend MA status **Performance Dashboard** shows: - Exit strategy (Fixed TP/SL, Trailing Stop, Opposite Signal) - Total trades and win rate - Total points and average per NY session - Profit factor and recovery factor - Best/worst trades and max drawdown - Maximum winning/losing streaks - Sharpe ratio and average risk:reward **TP Optimizer** (33 variations tested): - Tests take profit levels from 40 to 200 ticks (5-tick increments) - Sortable by: Profit Factor, Win Rate, Total Points, Sharpe Ratio - Displays top 5 configurations with full metrics - Real-time optimization during backtesting --- ## Backtest Engine ### Exit Strategies **1. Fixed TP/SL** - Configurable in Ticks, ATR multiples, or Percentage - Precise risk management with predefined targets **2. Exit on Opposite Signal** - Closes position when counter-signal appears - Adapts to changing market conditions - Useful for trend-following approaches **3. Trailing Stop** - Dynamic stop loss that follows profitable moves - Configurable trailing offset percentage - Locks in profits while allowing trends to develop ### Risk Management - Optional minimum risk:reward filter - Prevents trades below specified R:R threshold - Date range filtering for historical analysis - Session-based performance tracking ### Performance Metrics - Win rate, profit factor, Sharpe ratio - Maximum drawdown and recovery factor - Consecutive win/loss streaks - Average win/loss analysis - Gross profit vs gross loss breakdown --- ## Alert System Comprehensive alert conditions for: - Entry signals (Long/Short) - Exit events (TP/SL/Opposite/Trailing) - Trend signals (Strong bullish/bearish) - Divergences (Regular/Hidden/Momentum) - Order block detection and touches - Multi-condition strong signals (all confirmations aligned) --- ## How to Use ### Quick Start 1. Select your preferred timeframe preset (1m, 2m, 3m, 5m, 15m, or Custom) 2. Choose a trading mode (Normal, Scalper, Aggressive, Hybrid, Super Scalper, or Sniper) 3. Configure session filter to match your trading hours 4. Enable desired filters (choppy, trend, volume, ATR, MTF) 5. Set your exit strategy and TP/SL levels 6. Monitor signals on price chart and oscillator pane ### Optimization Workflow 1. Enable "Run TP Optimizer" in backtest settings 2. Run backtest on historical data 3. Review Optimizer Dashboard for best TP levels 4. Sort by preferred metric (Profit Factor, Win Rate, Total Points, Sharpe) 5. Apply winning configuration to live trading ### Advanced Configuration - Customize individual indicator lengths and enable/disable specific components - Adjust clustering parameters (lookback window, percentiles, cluster count) - Fine-tune smoothing methods and lengths - Configure order block detection timeframe and sensitivity - Set cooling off period to control signal frequency --- ## Unique Features 1. **Adaptive Clustering**: Volatility-adjusted percentiles ensure consistent performance across market conditions 2. **Multi-Mode Architecture**: Six distinct trading modes from conservative to ultra-aggressive 3. **Timeframe Intelligence**: Pre-optimized presets eliminate guesswork for common timeframes 4. **Smart Money Integration**: Order block detection and liquidity zone marking 5. **Comprehensive Backtesting**: Three exit strategies with 33-variation TP optimization 6. **Visual Clarity**: Mode-specific bar coloring and clean chart presentation 7. **Filter Stack**: Seven-layer filtering system prevents low-quality signals 8. **Real-Time Metrics**: Live performance tracking with advanced statistics --- ## Benefits - **Reduced False Signals**: Multi-confirmation clustering approach filters noise - **Adaptability**: Works across timeframes and market conditions through preset system - **Transparency**: Open visualization of all component votes and filtering status - **Risk Management**: Built-in TP/SL optimization and R:R filtering - **Time Efficiency**: Preset configurations save hours of manual optimization - **Educational Value**: Dashboard shows exactly why signals trigger or get filtered - **Professional Tools**: Institutional concepts (order blocks, liquidity zones) accessible to retail traders --- ## Best Practices - Use Sniper Mode for high-probability setups during volatile markets - Enable choppy filter during consolidation periods - Combine Smart Trend Filter with MTF confirmation for swing trades - Run TP Optimizer monthly to adapt to changing market dynamics - Monitor Sharpe Ratio in addition to win rate for risk-adjusted performance - Use session filters to avoid low-liquidity hours - Start with preset configurations before custom optimization --- ## Technical Requirements - TradingView Premium/Pro/Pro+ for full feature access - Minimum chart history: 500 bars (adjustable in clustering settings) - Works on all instruments (stocks, forex, crypto, futures) - Compatible with standard candles (Heikin Ashi optional but not recommended for backtesting) --- ## Disclaimer This indicator is a technical analysis tool designed to assist trading decisions. It does not guarantee profits and should be used in conjunction with proper risk management, fundamental analysis, and personal trading experience. Past performance does not indicate future results. Users should thoroughly test the indicator on demo accounts before live trading. --- **Version**: 4.0 **Language**: Pine Script v6 **Type**: Overlay Indicator with Oscillator Pane **Calculation**: On bar close (default) or real-time (configurable)
Indicador Pine Script®
por kdeezy
Session Highlighter with Kill Zones [Exponential-X]Session Highlighter with Kill Zones Overview This indicator provides comprehensive visualization of major forex trading sessions (Asian, London, and New York) with integrated kill zone detection and real-time session analytics. It helps traders identify optimal trading times by highlighting high-volatility periods and tracking session-specific price ranges. What Makes This Original While session indicators are common, this script uniquely combines several features that work together: Kill Zone Integration: Highlights specific high-volatility windows within sessions (London: 02:00-05:00 EST, NY: 08:30-11:00 EST) when institutional activity typically peaks Session Overlap Detection: Automatically detects and highlights when major sessions overlap (London-NY, Asian-London) with distinct visual cues Real-Time Range Tracking: Calculates and displays percentage-based session ranges as they develop, not just historical data Dynamic Statistics Dashboard: Live table showing current active session, session times, and comparative range percentages Customizable Visual System: Flexible styling options including background shading, box overlays, and configurable line styles for session boundaries How It Works Session Detection Logic The script uses timezone-normalized session detection based on EST/EDT times. It converts the current bar's timestamp to New York time and determines which session(s) are active using minute-based calculations. This approach ensures accurate session detection regardless of your chart's timezone settings. Kill Zones Kill zones represent periods within sessions when institutional traders are most active. The London kill zone (02:00-05:00 EST) captures pre-London open volatility, while the NY kill zone (08:30-11:00 EST) aligns with US economic data releases and market open activity. Range Calculations Session highs, lows, and opens are tracked from the first bar of each session and updated in real-time. Range percentages are calculated as: ((High - Low) / Low) × 100 , providing a volatility measure that's comparable across different instruments and price levels. Visual System Background shading: Color-coded zones for each session Session boxes: Outline entire session ranges H/L lines: Dynamic lines showing current session extremes Open lines: Reference levels from session start Overlap highlighting: Distinct colors when multiple sessions are active simultaneously How to Use Intraday Trading: Use kill zones to time entries during high-liquidity periods Session Breakouts: Monitor for price breaks above/below session highs/lows Range Trading: Trade between session boundaries during consolidation Session Continuity: Observe how price behaves as sessions transition Volatility Assessment: Compare current session ranges to typical values Recommended Timeframes: Works on any timeframe, but most useful on 1m to 1H charts for intraday trading. Settings Explained Sessions Group Toggle each major session on/off independently Customize colors for visual clarity Enable/disable overlap highlighting Levels Group Show/hide session high/low lines Show/hide session open levels Choose line styles (Solid/Dashed/Dotted) Kill Zones Group Toggle kill zone highlighting Select which kill zones to display Customize kill zone color intensity Display Group Show/hide statistics table Show/hide session labels on chart Important Notes All times are displayed in EST/EDT Session ranges reset at the start of each new session Kill zones are session sub-periods, not separate sessions Overlap colors override individual session colors when multiple sessions are active The statistics table updates in real-time and shows percentage-based ranges for cross-instrument comparison Session Times Reference Asian Session: 19:00 - 04:00 EST (Tokyo open through early Sydney close) London Session: 03:00 - 12:00 EST (Full European trading hours) New York Session: 08:00 - 17:00 EST (US market hours) London Kill Zone: 02:00 - 05:00 EST (Pre-London volatility spike) NY Kill Zone: 08:30 - 11:00 EST (US open and news releases) Alerts Available The script includes six pre-configured alert conditions: London Kill Zone start NY Kill Zone start London-NY Overlap start Asian Session open London Session open NY Session open Create alerts through TradingView's alert system to get notified when specific sessions or kill zones begin. Disclaimer: This indicator is for informational purposes only. Session times and kill zones are based on typical market patterns but do not guarantee specific trading outcomes. Always use proper risk management.
Indicador Pine Script®
por Exponential-X
Prev TF CLOSE EMA Box (Resets Every TF)⚙️ Key Features ✅ Custom reset timeframe (independent of chart TF) ✅ Uses previous CLOSED EMA (no lookahead) ✅ Box instead of line (clearer structure) ✅ Optional “disrespected → gray” logic ✅ Wick-based or close-based validation ✅ Works on futures, crypto, forex, equities 📈 How to Use Treat the box as a dynamic support / resistance zone Best used for: Trend continuation Mean reversion Bias filtering (above = bullish, below = bearish) When the box turns gray, the EMA level has lost structural validity ❗ Important Notes This is not a signal indicator No entries or exits are generated Designed for context, bias, and structure Combine with price action, liquidity, or session logic 🧩 Inputs Explained Reset / EMA TF → timeframe used for EMA calculation & box reset EMA Length → standard EMA length (default 9) Box Height → thickness of the EMA zone Disrespect Logic → optional invalidation behavior
Indicador Pine Script®
por EightFigRenko
EMA-10 Candle BreaksThe EMA-10 Trend Pullback Breakout indicator helps traders identify high-probability continuation entries by combining EMA direction, pullback candle behavior, and breakout confirmation. It highlights key pullback candles during a strong EMA-10 trend and marks precise breakout points when price resumes in the trend direction. 📈 How It Works 🔹EMA Direction Green EMA → EMA-10 is rising (bullish trend) Red EMA → EMA-10 is falling (bearish trend) 🔹 Pullback Candle Detection Bearish candle above EMA during an uptrend Bullish candle below EMA during a downtrend These candles often act as liquidity traps or pullbacks before trend continuation. 🔹 Breakout Labels RB (Red Breakout) Appears when price breaks above the high of the last bearish pullback candle in an uptrend. GB (Green Breakout) Appears when price breaks below the low of the last bullish pullback candle in a downtrend. These labels highlight potential trend continuation entries ⚙️ Inputs ✅ Highlight Bearish Candles Above EMA (optional) ✅ Highlight Bullish Candles Below EMA (optional) You can enable or disable candle highlighting to keep your chart clean. ⚠️ Notes This indicator is not a standalone trading system. Always use proper risk management and confirmation (market structure, volume, higher timeframe trend). Avoid ranging or low-volatility conditions.
Indicador Pine Script®
por m_zeeshan_asghar
SLO Pro-J-Algo # Smart Liquidity & OTE Analysis Tool ## OVERVIEW This indicator is designed for traders who utilize institutional trading concepts, specifically liquidity sweeps and optimal trade entry (OTE) zones, combined with session-based market structure analysis. It identifies potential market manipulation points where stop losses are likely clustered, and highlights high-probability entry zones based on Fibonacci retracements. The tool combines four main analytical components that work synergistically to identify trading opportunities aligned with smart money behavior. --- ## CORE CONCEPTS & METHODOLOGY ### 1. TRADING SESSIONS ANALYSIS **What it does:** The indicator tracks three major forex trading sessions with customizable time zones: - **Asian Session** (Default: 01:00-13:00 UTC+4) - Typically characterized by range-bound price action - **London Session** (Default: 11:00-20:00 UTC+4) - High volatility period with increased institutional activity - **New York Session** (Default: 17:00-00:00 UTC+4) - Overlaps with London creating peak liquidity **How it works:** - Automatically highlights active sessions with colored background boxes - Draws session high/low lines which often act as intraday support/resistance - Identifies session overlaps (e.g., London-NY overlap) where volatility and liquidity are highest - Color-codes the price bars during overlaps to alert traders to increased opportunity periods - Displays real-time session status (🟢 Open / 🔴 Closed) for quick reference **Trading Application:** Session highs and lows frequently become liquidity targets. The indicator helps traders anticipate when price might sweep these levels before continuing in the original direction. Session overlaps are prime times for major moves as multiple institutional players are active simultaneously. --- ### 2. EXTERNAL LIQUIDITY SWEEPS **What it does:** Identifies when price "sweeps" or breaks beyond significant swing highs and lows where stop losses are typically clustered. These sweeps often precede reversals or continuations after liquidity is collected. **How it works:** - Scans the previous 20 bars (configurable) to identify swing high and low points - Marks these levels as "buyside liquidity" (above highs) or "sellside liquidity" (below lows) - Monitors price action using three detection methods: * **Wick Break:** Any candle wick extending beyond the liquidity level * **Close Break:** Candle body closing beyond the level (stronger confirmation) * **Full Retrace:** Price breaks the level then closes back inside the range (classic liquidity grab) - Uses an ATR-based buffer to avoid false signals from minor price spikes - Confirms sweeps only after a configurable number of confirmation bars to reduce repainting **The Logic Behind It:** Institutional traders need liquidity to fill large orders. Stop losses clustered above swing highs and below swing lows provide this liquidity. When these levels are swept, it often indicates smart money is entering positions in the opposite direction, causing reversals. **Visual Representation:** - Blue horizontal lines mark buyside liquidity zones (above price) - Gray horizontal lines mark sellside liquidity zones (below price) - Labels indicate when liquidity has been swept (✓) or remains active - Historical zones are maintained for context (configurable display limit) --- ### 3. INTERNAL LIQUIDITY DETECTION **What it does:** Identifies equal highs (EQH) and equal lows (EQL) within recent price action - levels that have been tested multiple times without breaking. These represent internal liquidity pools that price often revisits before making larger moves. **How it works:** - Examines the most recent 8 bars (configurable) for price levels that occur multiple times - Uses an ATR-based threshold (default 0.1% of ATR) to determine if highs or lows are "equal" - Requires minimum 3 occurrences (configurable) of the same level to qualify as internal liquidity - Tracks both the creation and sweeping of these internal levels - Differentiates between wick breaks and close breaks for sweep confirmation **The Concept:** Unlike external liquidity at swing points, internal liquidity represents recent stop clusters and pending orders within the current price structure. Identifying these levels helps traders anticipate short-term price targets and potential reversal points before larger directional moves. **Why This Matters:** Price often needs to clear internal liquidity before making sustained moves to external liquidity levels. This creates a "roadmap" of where price is likely to go in sequence, improving trade timing. **Visual Representation:** - Cyan lines mark internal buyside liquidity (equal highs) - Orange lines mark internal sellside liquidity (equal lows) - Dashed or solid lines based on user preference - Labels show when internal levels are swept --- ### 4. OPTIMAL TRADE ENTRY (OTE) ZONES **What it does:** Calculates and displays Fibonacci retracement zones (0.618-0.786) from recent swing points, representing "discount" or "premium" areas where institutional traders often enter positions after a liquidity sweep or structure break. **How it works:** - Identifies swing highs and lows using a 10-bar lookback period (configurable) - Calculates three key Fibonacci levels: * **0.618** - The "golden ratio" retracement (most significant) * **0.705** - Mid-point between 0.618 and 0.786 * **0.786** - Deep retracement level (square root of 0.618) - Optionally requires a structure break before displaying OTE zones - Dynamically extends zones as new price action develops - Tracks whether price has entered the zone (✅) or exited without filling (❌) - Displays up to 2 most recent zones (configurable) to avoid chart clutter **The Methodology:** OTE zones represent areas where price is at a "discount" (for longs) or "premium" (for shorts) relative to the recent swing. After a liquidity sweep or structure break, institutional traders often wait for retracements into these zones before entering, as it offers better risk-to-reward ratios. **Combining with Liquidity:** The most powerful setups occur when: 1. External liquidity is swept 2. Price retraces into an OTE zone 3. Internal liquidity is present as a target This confluence suggests smart money activity and high-probability trade opportunities. **Visual Representation:** - Shaded blue zone between 0.618 and 0.786 levels - Three horizontal lines showing key Fibonacci levels with different colors/styles - Labels (🎯) indicate bullish or bearish OTE zones - Entry (✅) and exit (❌) status for each zone --- ## WHY THESE FEATURES WORK TOGETHER This indicator combines these four components because they represent different stages of institutional trading behavior: 1. **Session Timing** - Identifies WHEN institutional activity is highest 2. **Liquidity Sweeps** - Shows WHERE smart money is collecting liquidity 3. **OTE Zones** - Highlights WHERE institutional entries likely occur after sweeps 4. **Internal Liquidity** - Provides SHORT-TERM targets for profit-taking or add-ons Rather than using each concept in isolation, this integration creates a complete market structure framework. For example: - A buyside liquidity sweep during London open → - Followed by a retrace into a bullish OTE zone → - With internal sellside liquidity as the initial target This sequence represents a complete high-probability trade setup aligned with smart money principles. --- ## ANTI-REPAINTING FEATURES **The Repainting Problem:** Many indicators that identify patterns on historical data repaint their signals when live trading, showing signals that weren't actually there in real-time. This creates a false sense of accuracy. **Our Solution:** - **Confirmation Bars Setting:** Signals only appear after X bars have confirmed the pattern (default: 2 bars) - **Marked Confirmation:** Labels show "C" when using confirmed signals - **Trade-off:** More confirmation = less repainting but slightly delayed signals - **User Control:** Traders can toggle between real-time signals (faster but may repaint) and confirmed signals (delayed but reliable) --- ## KEY CUSTOMIZATION OPTIONS ### Master Controls - Toggle each major feature on/off independently - Combine only the features relevant to your trading style ### Display Settings - Adjust lookback periods for each component - Control number of historical zones displayed - Customize colors, line styles, and transparency - Show/hide labels and session names - Configure text sizes for different screen setups ### Detection Sensitivity - **Sweep Detection:** Choose between wick breaks, close breaks, or full retraces - **ATR Buffer:** Add distance requirements to confirm sweeps (reduces false signals) - **Equal Level Threshold:** Adjust how close levels must be to qualify as "equal" - **Confirmation Bars:** Balance between signal speed and reliability ### Alert System - Session open/close notifications - Liquidity sweep alerts - OTE zone entry alerts - Configurable alert frequency and types --- ## HOW TO USE THIS INDICATOR ### Basic Setup 1. Add the indicator to your chart (works on all timeframes, though 5M-1H recommended for intraday) 2. Enable the features you want to use via Master Controls 3. Adjust colors and transparency to match your chart preferences 4. Configure alert preferences if using notifications ### Trading Workflow **Step 1: Identify the Session** - Determine which trading session is active or approaching - Note session highs/lows as potential liquidity targets - Be especially alert during session overlaps **Step 2: Watch for Liquidity Sweeps** - Monitor external liquidity lines (swing highs/lows) - When price sweeps liquidity, anticipate a potential reversal - Stronger sweeps (close breaks + full retraces) are more significant **Step 3: Wait for OTE Retracement** - After a sweep, wait for price to retrace into the OTE zone (0.618-0.786) - Bullish OTE after sellside sweep = potential long - Bearish OTE after buyside sweep = potential short **Step 4: Use Internal Liquidity as Targets** - Look for internal liquidity in the direction of your trade - These serve as initial profit targets - External liquidity serves as extended targets **Step 5: Manage Confirmation Settings** - For live trading, use confirmed signals (2+ confirmation bars) - For backtesting or analysis, you may use real-time signals - Note that confirmed signals appear with "C" marking ### Example Trade Scenarios **Bullish Setup:** 1. London session opens (increased volume) 2. Price sweeps sellside liquidity below Asian low 3. Price retraces into bullish OTE zone (0.618-0.786 of the sweep move) 4. Target internal buyside liquidity, then external buyside liquidity **Bearish Setup:** 1. NY session overlap with London (peak liquidity) 2. Price sweeps buyside liquidity above recent high 3. Price retraces into bearish OTE zone 4. Target internal sellside liquidity, then session lows --- ## BEST PRACTICES ### What This Indicator Does Well ✓ Identifies high-probability institutional trading zones ✓ Provides clear visual roadmap of likely price targets ✓ Reduces chart clutter with configurable history limits ✓ Works across multiple timeframes and instruments ✓ Minimizes repainting with confirmation settings ### What This Indicator Doesn't Do ✗ Does not provide entry/exit arrows (intentional - requires trader discretion) ✗ Does not guarantee winning trades (no indicator does) ✗ Does not work in isolation (combine with price action/market context) ✗ Does not replace risk management (always use stop losses) ### Recommended Complementary Analysis - Price action patterns (engulfing candles, pinbars at OTE zones) - Volume profile or footprint charts for order flow confirmation - Higher timeframe trend context (don't fade strong trends) - Economic calendar awareness (avoid major news events) --- ## TECHNICAL NOTES ### Performance Optimization - Uses max_bars_back limitation to reduce memory usage - Automatic cleanup of old zones to prevent slowdown - Efficient array management with configurable display limits - Suitable for both intraday and swing trading timeframes ### Timeframe Recommendations - **1-5 Minute:** Scalping with tight internal liquidity targets - **15-30 Minute:** Intraday trading with session-based setups - **1-4 Hour:** Swing trading with multi-session analysis - **Daily:** Position trading using weekly liquidity levels ### Instrument Compatibility Works on all liquid instruments: - Forex pairs (optimal due to clear sessions) - Stock index futures (ES, NQ, etc.) - Cryptocurrency (24/7 markets - use custom session times) - Individual stocks (less pronounced session effects) --- ## EDUCATIONAL RESOURCES To better understand the concepts used in this indicator: **Liquidity Concepts:** - Study institutional order flow and stop loss hunting - Learn about market microstructure and liquidity provision - Understand the difference between retail and institutional trading **Fibonacci/OTE:** - Research Fibonacci retracements in trending markets - Study the mathematical significance of the golden ratio (0.618) - Practice identifying retracement entries on historical charts **Session Trading:** - Analyze volume profiles during different forex sessions - Study typical price behavior during session overlaps - Understand timezone conversions for your local trading hours --- ## VERSION HISTORY & UPDATES This script represents a complete integration of multiple smart money concepts into a single, cohesive tool. Future updates will be published using the Update feature rather than creating separate scripts for minor variations. --- ## DISCLAIMER This indicator is for educational and informational purposes only. It does not constitute financial advice or trading recommendations. All trading involves risk, and past performance does not guarantee future results. Always practice proper risk management and never risk more than you can afford to lose. The concepts presented here (liquidity sweeps, OTE zones, session analysis) are widely discussed trading theories. This indicator is an interpretation and visualization of these concepts, not a guarantee of their effectiveness. --- ## SETTINGS SUMMARY **Master Controls:** Enable/disable each major feature independently **Repainting Controls:** Adjust confirmation requirements for signals **Trading Sessions:** Customize session times, colors, and display options **External Liquidity:** Configure detection sensitivity and visual styling **Internal Liquidity:** Adjust lookback periods and threshold sensitivity **OTE Zones:** Select which Fibonacci levels to display and entry requirements **Alerts:** Configure notifications for sessions, sweeps, and entries --- ## SUPPORT & FEEDBACK If you find this indicator helpful, please leave a like and comment with your feedback. For questions about specific settings or concepts, refer to the tooltips in the indicator settings panel - each parameter includes a detailed explanation. Remember: The best indicator is the one you understand and can apply consistently within your trading plan. Take time to practice with this tool on demo accounts before risking real capital.
Indicador Pine Script®
por Fx-Jithin
1