Começar

Pesquisar nos scripts por "bands"

Bands Bands (BanB)This indicator uses bands to show the trend of other bands. The middle bands are used to show the price trend and the other bands are for the middle bands. The Spike and Plunge bands can also act as a sort of "Bollinger Bands" for middle bands, though not exactly. ----- HOW TO USE IT ----- Zoom out in the 30 minute chart. Use 15 minute chart to pinpoint your entries. Use with price-action trading and with indicators showing overbought & oversold levels. The numbers below correlate with the numbers in the chart. 1) Price hits the Middle Spike line. The "ARL" bands hit the Bottom Spike line. This is a good indication that price will proceed under the Bottom Spike line. 2) Price hits the Bottom Plunge line. The "ARL" bands hit the Middle Plunge line. This is a good indication that price will proceed above the Middle Plunge line. 3) Notice how price spikes up near the Spike lines but doesn't touch. Notice how the Plunge lines have a strong pull downwards. This shows a continued down trend. 4) The same pattern as numbers 2 & 3 reoccur. This time, however, the proceeding price spike is substantially lower. 5) The price and middle bands finally bounce off the Top Plunge line and starts to get closer to the Spike bands. 6) Price and middle bands finally touch the Bottom Spike line and the Spike Bands and the Plunge Bands come closer together. 7) Narrowing Spike and Plunge Bands show a sideways market. Notice number 1, the bands are far apart -- more volatility is present. Middle Bands: The bottom, blue lines are fairly accurate dip-rebounds on the 30 minute chart. Use level indicators to find reversing trends (e.g., RSI, Stoch, etc.). Price action hovering in between the blue lines and around the center indicate a low volatility market or a consolidating market. ----- HOW THIS INDICATOR IS ORIGINAL; WHAT IT DOES AND HOW IT DOES IT ----- This indicator has an original, unique ability to view the trend of bands in a substantially larger overview when zoomed out. Normally, one would have to switch to higher time frames to get a sense of a larger market trend. However, doing so will change any bands indicator to accommodate the new price action in relation to the new time frame. To avoid this, the middle bands are placed in between two bands to see the trend of the bands that show the trend of price action. ----- VERSION ----- The "ARL Bands" in this indicator are NOT the same as the "ARL Bands" indicator. They are "ARLs" set in an entirely different context, format, and amount and so does not constitute as a different version of "ARL Bands". The "ARL Bands" indicator only has 4 lines and can be adjusted to any level. They are mainly focused on rebounds at desired levels. The 13 "ARLs" here cannot be adjusted and are mainly focused on anticipating/calculating probabilities of peak and dip rebounds. If any discrepancy should arise, let it be stated here that the "ARLs" in this indicator are considered to be a forked codebase to conserve the functionality of "ARL Bands". This is proven by the differences described underneath "VERSION", which is located 7 lines above.
Indicador Pine Script®
por More-Than-Enough
3
Bands and Channels Laboratory [DAFE]Bands and Channels Laboratory : The Ultimate Volatility & Envelope Engine 40+ Unique Algorithms. The Revolutionary MTF Horizon Display. Smart Kill Zones & Pattern Recognition. This is not just a band indicator; it is the definitive toolkit for mastering market volatility. █ PHILOSOPHY: BEYOND THE BAND, INTO THE LABORATORY Standard band indicators like Bollinger Bands or Keltner Channels are built on a simple, powerful idea: price tends to revert to a mean, and its deviation from that mean is a measure of volatility. However, their core calculations are primitive. A simple moving average for the basis and a simple standard deviation for the width are blunt instruments in a market that demands surgical precision and adaptability. The Bands and Channels Laboratory was not created to be another band indicator. It was engineered to be the final word on volatility and envelope analysis. This is not just an indicator; it is a powerful, interactive research environment. It is a laboratory where you, the trader, can move beyond the static "one-size-fits-all" approach and forge a volatility system that is perfectly synchronized with the unique physics of your market. We have deconstructed the very concept of a "band," separating it into its three core components— The Basis (Center Line) , The Deviation (Width) , and The Band Type (Envelope Logic) —and rebuilt each one with a library of dozens of advanced algorithms. This modular approach provides an almost infinite number of unique combinations, allowing you to construct a tool that is truly your own. █ WHAT MAKES THIS THE "ULTIMATE" LABORATORY? THE CORE INNOVATIONS This tool stands in a class of its own, offering a suite of proprietary features that collectively create an unparalleled analytical experience. The 40+ Algorithm Core (Modular Engine): This is the heart of the Laboratory. You have independent control over the mathematical engine for each part of the band: 22 Basis Algorithms: Choose anything from a classic SMA to a zero-lag Hull MA, an adaptive KAMA, or a proprietary DAFE engine for your center line. 16 Deviation Algorithms: Move beyond simple standard deviation. Use statistically robust measures like Parkinson Volatility, advanced concepts like the Ulcer Index, or proprietary DAFE engines like "DAFE Dark Matter" to calculate your band width. 14 Band Types: Select the fundamental logic, from Bollinger and Keltner to unique DAFE models like "DAFE Quantum Bands." The MTF Horizon Display: A revolutionary leap in data visualization. The Horizon projects up to three "holographic" displays of higher-timeframe band metrics (like Bandwidth % or Squeeze State) directly onto your main price chart. You can now see the "Macro Volatility" of the 1-Hour, 4-Hour, and Daily charts without ever leaving your 5-minute screen. The Smart Kill Zone Engine: The indicator automatically identifies, plots, and tracks high-probability reversal zones. These are not based on simple price pivots. They are generated by identifying price levels where price interacted with the bands on high volume and with significant momentum, marking a true, institutionally defended level. The Pattern Recognition Engine: The Laboratory isn't just reactive; it's proactive. It automatically detects and labels critical band patterns, including multiple types of Squeezes (Coiling, Compression), strong Walking Bands trends, and subtle Band Divergences that often precede major reversals. The Visualization Core: Data should be intuitive and beautiful. Choose from 11 distinct, animated, and theme-aware rendering modes . From the glowing "Quantum Field" and flowing "Plasma Storm" to the abstract "Neural Network," you can transform the simple band into interactive data art. █ A GUIDED TOUR OF THE ALGORITHMIC CORE This is your library of mathematical DNA. Understanding your tools is the first step to mastery. THE ENGINE FAMILIES The Basis Algorithms (Center Line): You have over 22 choices. Replace the lagging SMA with a Hull MA for zero lag, a KAMA for adaptivity, or the DAFE Tensor Cloud for a 4D average of OHLC data. Your center line is now as intelligent as you want it to be. The Deviation Algorithms (Band Width): You have over 16 choices. Go beyond simple standard deviation. Use advanced statistical measures like Garman-Klass or Yang-Zhang for a more efficient estimate of volatility. Or, deploy proprietary DAFE engines like DAFE Entropy , which widens the bands in chaotic markets, or DAFE Elastic , which resists extreme expansion. The Band Types: Choose from 14 fundamental logics, including classics like Bollinger Bands, Keltner Channels , and Donchian Channels , as well as proprietary DAFE models like the DAFE Quantum Bands , which use a noise-canceling step function for their width. █ ACTIONABLE INTELLIGENCE: THE SIGNAL & PATTERN ENGINES The Laboratory transforms bands from a simple contextual tool into a complete trading framework. The Signal Engine: You are not limited to one strategy. Choose from eight distinct signal modes, from classic Mean Reversion on a band touch to aggressive Squeeze Breakouts or robust Trend Following signals. The "Smart Composite" mode uses a multi-factor scoring system to identify only the highest quality setups. The Pattern Engine: This is your early warning system. Squeeze Classification: It doesn't just tell you there's a squeeze; it classifies its type ("Coiling," "Compression"), giving you insight into the potential energy being stored. Walking the Bands: It automatically detects when price is "walking" or "riding" the upper or lower band—the signature of an extremely powerful trend. Band Divergence: It alerts you to subtle but powerful divergences between the trend of the price and the trend of the bandwidth, often signaling trend exhaustion before it's visible in price action. █ THE MASTER DASHBOARD: YOUR "AT-A-GLANCE" COMMAND CENTER The professional-grade dashboard provides a comprehensive, real-time summary of the entire volatility system's state. Position & State: Instantly see the price's position relative to the bands (%B), the current Bandwidth percentage, and the overall Volatility Regime (HIGH, LOW, NORMAL). Pattern Readout: Get a real-time display of the currently detected band pattern (e.g., "SQUEEZE: COILING," "WALKING UPPER"). Signal Status: Confirms the most recent signal generated by your chosen signal mode and displays its calculated "Strength." Optimizer Data: When enabled, shows the backtest results of your current settings, including Win Rate, Profit Factor, and a proprietary Robustness Score. █ DEVELOPMENT PHILOSOPHY Bands Laboratory Ultra was born from a fascination with the physics of the market: the constant ebb and flow between equilibrium and chaos, compression and expansion. We believe that volatility is not just a risk metric; it is the very energy that drives all market movement. This tool was designed for the serious trader who seeks to understand and harness that energy. It is for the analyst who wants to deconstruct, test, and build a volatility tool that is a perfect extension of their own mind. This Laboratory is designed to help you be wrong less often by providing a crystal-clear, multi-dimensional view of market volatility, allowing you to filter out low-probability trades and act with precision when the odds are stacked in your favor. █ DISCLAIMER AND BEST PRACTICES THIS IS AN ADVANCED ANALYTICAL TOOL: This indicator provides a sophisticated volatility and signal framework. It must be integrated into a complete trading plan that includes your own analysis and risk management. TEST, DON'T GUESS: The power of this tool is its adaptability. Use the built-in Optimizer Engine to rigorously test different algorithm combinations and settings on your chosen asset and timeframe. START WITH A ROBUST BASE: A classic "Bollinger Bands" type with a "Hull MA" basis and "Standard Deviation" is an excellent, low-lag starting point. From there, begin experimenting with more advanced deviation methods or basis algorithms. USE CONFLUENCE: The highest probability signals come from confluence. A "Squeeze Breakout" buy signal that is confirmed by high volume, a bullish ADX, and alignment with the MTF Horizon is an A++ setup. "In the business of trading, the winner is not the person who is never wrong, but the person who is wrong the least." — William Eckhardt, Market Wizard Taking you to school. - Dskyz, Trade with Bands. Trade with Channels. Trade with Bands and Channels Laboratory
Indicador Pine Script®
por DskyzInvestments
2
Foxy's Acceleration BandsFoxy's Acceleration Bands is a dynamic technical indicator designed to help traders identify potential support and resistance levels using logarithmic regression and adaptable moving averages. By plotting bands around price movements, this indicator offers insights into potential zones where price acceleration, resistance, and support might occur. How to Use: Apply the "Foxy's Acceleration Bands" indicator to your TradingView chart. Customize the indicator parameters as per your requirements: factor: Adjust the sensitivity of the bands. length: Set the length for moving averages and regression calculations. mult: Modify the multiplier for upper bands. Show Middle Bands: Toggle the display of middle bands. Show Upper Bands: Toggle the display of upper bands. Band MA Type: Choose the moving average type for the bands. Middle MA Type: Select the moving average type for the central band. Draw Prediction: Enable prediction lines for potential future price trends. Prediction Slope Type: Choose between a fixed or dynamic slope length for prediction lines. Fixed Slope Length: Set the slope length for prediction lines (if enabled). Interpretation: Upper Bands: The red upper bands indicate potential resistance zones where price acceleration might occur. Middle Bands: The orange central band provides insights into the prevailing price trend. Lower Bands: The green lower bands suggest potential support zones where price deceleration might happen. Prediction Lines: If enabled, dotted lines visualize potential future price trends based on historical data. Important Note: Foxy's Acceleration Bands is designed to assist traders in identifying potential support and resistance zones. Always complement its insights with other analysis techniques and prudent risk management strategies.
Indicador Pine Script®
por TheOnlyFoXy
1
Customizable 52 Week High & Range BandsTitle: Customizable 52 Week High & Range Bands Indicator Description: The "Customizable 52 Week High & Range Bands" indicator is a novel tool designed for traders and investors who seek to gain insights into an asset's long-term performance while simultaneously identifying potential support and resistance levels through customizable percentage-based range bands. Key Features: 52-Week High Visualization: At its core, this indicator pinpoints the highest price reached by an asset over the past 52 weeks, offering a clear view of its peak performance in the yearly window. Adjustable Range Bands: Unlike fixed indicators, this tool allows users to set a custom percentage above and below the 52-week high to create upper and lower range bands. These bands are invaluable for traders looking to gauge potential breakout or pullback zones relative to historical highs. Strategic Decision-Making: By adjusting the range bands, users can tailor the indicator to match their trading style, whether it be conservative or aggressive, making it a versatile addition to any trading strategy. How to Use: Customize the Percentage: Begin by setting your desired percentage for the range bands through the indicator settings. This will adjust the upper and lower bands to encapsulate the range you're interested in monitoring. Analyze the Bands: The 52-week high and its corresponding range bands are plotted directly on the chart, offering immediate visual cues. Look for price actions that approach or breach these bands to identify potential trading opportunities. Incorporate into Your Strategy: Use the information provided by the indicator in conjunction with other analysis tools or indicators to refine your trading decisions and strategies. This indicator stands out by providing not just a static view of the past year's performance but a dynamic tool that can be customized to fit the individual trader's needs, making it a valuable addition to the TradingView Community.
Indicador Pine Script®
por mukeshupadhyay68
Jumbalika BandsThis indicator is designed using several common technical analysis tools: Bollinger Bands, Exponential Moving Averages (EMAs), and the Parabolic SAR. I'll walk you through each section to explain how it works and how you can use it: 1. Bollinger Bands Bollinger Bands are used to measure volatility and overbought/oversold conditions. It consists of three lines: Basis (Middle Line): A simple moving average (SMA) of the price over a defined period (in this case, 20 periods). Upper Band: The basis plus a certain number of standard deviations. It represents the upper boundary of expected price movement. Lower Band: The basis minus the same number of standard deviations. It represents the lower boundary of expected price movement. Interpretation: Overbought: If the price moves above the upper band, it could signal that the asset is overbought. Oversold: If the price moves below the lower band, it could signal that the asset is oversold. Volatility: A wider band indicates higher volatility, and a narrower band indicates lower volatility. 2. Exponential Moving Averages (EMAs) The indicator plots four different EMAs: 9-period EMA: This is a short-term trend indicator. 20-period EMA on Close: This is another medium-term trend indicator, based on the close price. 20-period EMA on High: A variation of the 20-period EMA, but based on the high prices. 20-period EMA on Low: A variation of the 20-period EMA, but based on the low prices. Interpretation: 9 EMA: A faster-moving average that responds quicker to price changes. It can be used to identify short-term trends. 20 EMA: A slower-moving average that reacts more gradually to price changes. It helps identify the broader trend. High/Low EMAs: These give additional insights into the extremes of price action, which can help identify possible support or resistance levels. Trading signals (common usage): Crossover: When a shorter EMA (like the 9 EMA) crosses above a longer EMA (like the 20 EMA), it could be a bullish signal. When it crosses below, it could be a bearish signal. 3. Parabolic SAR The Parabolic SAR is a trend-following indicator that is used to identify potential price reversals. The Parabolic SAR is plotted as a series of dots either above or below the price, depending on the trend: Below the price: The trend is up (bullish). Above the price: The trend is down (bearish) 4. Background Coloring (Optional) The background will change color when the price crosses the Bollinger Bands: Green background when the price is above the upper Bollinger Band. Red background when the price is below the lower Bollinger Band. Adjust the values for Bollinger Bands, EMAs, and Parabolic SAR directly in the indicator settings to suit your trading preferences. Bollinger Bands: If the price is above the upper band, it might indicate an overbought condition, while if it's below the lower band, it might indicate an oversold condition. EMAs: The 9 EMA is often used to track short-term trends, while the 20-period EMAs (on the close, high, and low) help analyze the broader market trend. Parabolic SAR: The Parabolic SAR is often used to identify trend reversals. If the SAR is below the price, the trend is up, and if it's above the price, the trend is down. Background Color: The background coloring helps visually highlight potential market conditions when the price breaks out of the Bollinger Bands. Example Use Case: Decide the trend based on the parabolic SAR, when the bar touches the upper or lower Bollinger take a short or long position based on the price action using EMAs.
Indicador Pine Script®
por jiya14
Bollinger Bands CustomThe indicator is a customized version of Bollinger Bands with added trading signals. This indicator is designed to help traders identify potential entry (buy) and exit (sell) points based on the interaction between the price and the Bollinger Bands. Below, I will explain in detail its purpose, how it works, and how to use it. Purpose of the Indicator The main purpose of this indicator is: Identify market volatility: Bollinger Bands expand and contract based on price volatility. Provide trading signals: The indicator generates buy signals (BUY) when the price crosses the lower band and sell signals (SELL) when the price crosses the upper band. Help identify dynamic support and resistance levels: The upper and lower bands act as dynamic resistance and support levels. How the Indicator Works The indicator is based on three main components: Moving Average (SMA): It calculates the simple moving average (SMA) of the price over a specified period (length). Bollinger Bands: The upper band is calculated as the moving average plus a standard deviation multiplied by a factor (mult). The lower band is calculated as the moving average minus a standard deviation multiplied by the same factor. Trading signals: A BUY signal is generated when the price crosses above the lower band. A SELL signal is generated when the price crosses below the upper band. How to Use the Indicator Here is a step-by-step guide on how to use the indicator on TradingView: 1. Add the Indicator to the Chart Copy the Pine Script code you created. Open TradingView and go to the Pine Editor. Paste the code and click "Add to Chart." The indicator will be displayed directly on the price chart. 2. Customize the Parameters You can customize the following parameters: Moving Average Length (length): Set the period for the moving average (default is 20). Price Source (source): Choose the price to use (default is the closing price). Standard Deviation Multiplier (mult): Set the multiplier for the standard deviation (default is 2.0). 3. Interpret the Signals BUY Signal: When you see a "BUY" label below a candle, it means the price has crossed above the lower band. This could indicate a buying opportunity. SELL Signal: When you see a "SELL" label above a candle, it means the price has crossed below the upper band. This could indicate a selling opportunity. 4. Use Bollinger Bands as Support and Resistance If the price approaches the upper band, it might indicate a resistance level. If the price approaches the lower band, it might indicate a support level. 5. Monitor the Colored Background The chart background turns light green when there is a BUY signal and light red when there is a SELL signal. This helps you quickly identify signals. Practical Example Suppose you are analyzing a daily chart of a stock or cryptocurrency: If the price crosses above the lower band, the indicator will show a "BUY" label. You might consider this as a signal to open a long position. If the price crosses below the upper band, the indicator will show a "SELL" label. You might consider this as a signal to close a long position or open a short position. Limitations and Considerations False signals: In range-bound markets, Bollinger Bands can generate many false signals. It is advisable to use this indicator in combination with other technical analysis tools. Extreme volatility: During periods of high volatility, the bands expand, and signals may become less reliable. Confirmation: It is always good practice to confirm signals with other indicators (e.g., RSI, MACD) or candlestick analysis. Conclusion My indicator is a useful tool for identifying potential trading opportunities based on Bollinger Bands. However, as with any indicator, it is important to use it in combination with other forms of analysis and risk management to maximize effectiveness. Happy trading! 🚀
Indicador Pine Script®
por helpfulRhino20269
2
SMA with ATR BandsSMA with ATR Bands This custom indicator combines the Simple Moving Average (SMA) with Average True Range (ATR) bands. It’s designed to help traders identify potential price reversals and gauge volatility. Here’s what it does: Simple Moving Average (SMA): The SMA represents the average price over a specified period. It acts as a trend-following line, smoothing out price fluctuations. The blue line on the chart represents the SMA. ATR Bands: The ATR measures volatility by calculating the average range between high and low prices. We add and subtract the ATR (multiplied by a user-defined factor) from the SMA to create the bands. The green upper band and red lower band dynamically adjust based on volatility. How to Use It: Volatility Signals: When the bands are close together (a “squeeze”), it indicates low volatility. A breakout often follows. Overbought/Oversold: Price touching the upper band suggests overbought conditions, while touching the lower band suggests oversold conditions. Trend Confirmation: The indicator can confirm trends. Feel free to use this indicator on TradingView to enhance your trading strategy. Remember to customize the parameters according to your preferences. Happy trading! 📈🚀
Indicador Pine Script®
por gurmitms
1
Hull MA with 4 StdDev Bandsull MA with Multi-StdDev Bands This indicator plots a Hull Moving Average (HMA) of (High + Low) / 2 with a default length of 90, surrounded by four customizable standard deviation bands. Features: Dynamic Hull MA coloring: Green when price trend is rising, red when falling. Customizable deviation levels: Default set to 1.2, 1.4, 1.6, and 1.8 standard deviations, adjustable in the settings. 4 upper and 4 lower volatility bands: Based on the standard deviation of price relative to the Hull MA, providing a clear visual of potential overbought and oversold zones. Uses: Identify trend direction quickly via Hull MA color change. Monitor volatility expansion/contraction. Spot potential reversal or breakout areas when price interacts with outer bands.
Indicador Pine Script®
por mppretorius85
Advanced BB Bands with PlotThis code implements an advanced version of Bollinger Bands with additional moving averages, ATR-based bands, step lines, market direction indicators, and real-time data display. Here’s a breakdown of the functionality: 1. Inputs and Parameters: length: The base period used for calculating the moving averages and the typical price. atr_length: The length used for calculating the Average True Range (ATR). step_length: The period for calculating step lines (highest high and lowest low over a given period). 2. Core Calculations: Typical Price: (high + low + close) / 3 is the base for the moving averages. ATR: ta.atr(atr_length) is used to create dynamic bands around the moving averages. PL Dot: An average of the typical prices from the current and past two bars. This provides a short-term trend indicator. 3. Multiple Moving Averages (MAs): Three simple moving averages (ma1, ma2, ma3) are calculated using different multiples of the base length. These help indicate short-, mid-, and long-term trends. 4. Step Lines: Step Up: Highest close over the step_length. Step Down: Lowest close over the step_length. These act as short-term support and resistance levels. 5. Outer Bands: Upper Band: ma1 + 2 * ATR, an upper boundary based on ATR volatility. Lower Band: ma1 - 2 * ATR, a lower boundary. Together, these form a dynamic range around the short-term moving average. 6. Market Direction: Bullish or Bearish condition is determined by comparing ma1 and ma2. If ma1 is above ma2, the market is bullish; otherwise, it's bearish. This decision is displayed on the TradingView chart using a table. 7. Visual Elements: Moving Averages (ma1, ma2, ma3): Plotted in different colors (blue, purple, white) to indicate different timeframes. PL Dot: A step line plot for the PL Dot, which helps in spotting short-term trends. Step Lines: Step-up and step-down levels plotted in lime and red, respectively. Outer Bands: Upper and lower ATR-based bands plotted in aqua, with a filled region between the bands for easy visualization of price volatility. Candlestick Coloring: Green bars for bullish and red for bearish price action. 8. Real-Time Board Display: A table is created in the top-right corner of the chart to display: The current closing price. The market direction ("Bullish" or "Bearish"). The PL Dot value. The table updates on the most recent bar (barstate.islast). 9. Dynamic Labels: On the most recent bar, labels are added dynamically to the upper and lower bands and the ma1. These labels help in identifying the values of key indicators directly on the chart. 10. Signals and Alerts: Bullish and Bearish Cross: Visual signals are plotted on the chart when ma1 crosses above or below ma2. These are represented as up and down triangles, providing potential buy/sell signals. Key Features Summarized: Multi-Timeframe Moving Averages: 3 MAs based on different timeframes. Dynamic ATR Bands: ATR-based upper and lower boundaries for volatility measurement. Step Lines: Short-term high and low lines for support/resistance. PL Dot: A short-term trend identifier. Real-Time Dashboard: Live updates of price, trend, and PL Dot on the chart. Visual Alerts: Dynamic labeling and crossover signals to assist in decision-making. This script is designed for traders who want to track price movement within bands, evaluate trends across multiple timeframes, and visualize short-term market direction with dynamic alerts.
Indicador Pine Script®
por Zeoth3200
OiDeer (Session Map+Open+VWAP+PrevDay+VIX bands)Overview Intraday context pack for NSE symbols that overlays Prev Close (official 15:30), Prev Day High/Low, Daily Open, 1st Candle Open, VWAP, an optional centered 100-point grid, and Expected High/Low bands derived from India VIX (Open). It also computes remaining points to reach the expected bands for today (live) and for every historical session. What it plots Prev Close (yesterday 15:30 cash close) extended across today. Prev Day High/Low extended across today. Daily Open and Intraday 1st Candle Open (today only). VWAP (session). Expected High/Low from India VIX(Open) with optional √time intraday scaling. Remaining points labels: Today: points from today’s High → Exp High and today’s Low → Exp Low (also shown in Data Window). Historical: for each completed day, points that were remaining from that day’s High/Low to its expected High/Low. 100-point centered grid (…00 levels by default; shift via Base Offset). All labels are anchored at the session start bar (arrow on day boundary) with the label box rendered to the left so current candles stay unobstructed. VIX math (expected move) Daily σ: (VIX_open / 100) / √252. Intraday option (today only): multiply by √(elapsed_minutes / 375). Expected % move: k * daily_sigma * (√fraction if enabled). Bands around reference S (choose Open, Prev Close, or Last): ExpHigh = S + S * expected_pct ExpLow = S - S * expected_pct Historical sessions use that day’s VIX(Open) and reference S (no intraday scaling). Inputs Prev Close / PDH / PDL: show/hide, label toggles, colors, widths. Daily/1st Candle Open, VWAP: show/hide; labels sit left of day start. India VIX Bands: k (sigma), Reference Price (Open / Prev Close / Last), √time scaling toggle, colors, label toggles. Remaining to Exp Bands: show labels, Clamp to 0 (no negatives), show in Data Window. 100-Point Grid: step, base offset, style, count above/below, color/width. Label size control. Data Window Pts→Exp High (from Day High) Pts→Exp Low (from Day Low) Pts→Exp High (from Close) Pts→Exp Low (from Close) 100pt lines ABOVE/BELOW (from current price) Notes Assumes NSE cash session 09:15–15:30 IST (375 min). Prev Close uses official cash close at 15:30. Designed for NSE symbols; India VIX source: NSE:INDIAVIX (Daily Open). No alerts in this version. Tips Use k = 1.0 for ~1σ feel; try 1.5–2.0 for wider envelopes. Open as reference is clean for intraday; Prev Close is gap-aware. Turn on √time scaling if you prefer bands that widen through the day. Disclaimer For research and visualization only, not trading advice. Markets can exceed modeled ranges—use your own risk management.
Indicador Pine Script®
por SHRIKANTRANE21
Bollinger Bands, RSI, and MA StrategyThe "Bollinger Bands, RSI and MA Strategy" is a trend-following strategy that combines the Bollinger Bands indicator, the Relative Strength Index (RSI), and a moving average (MA). It aims to identify potential entry and exit points in the market based on price volatility, momentum, and trend. The strategy uses two Bollinger Bands with different standard deviations to create price channels. The default settings for the Bollinger Bands are a length of 20 periods and a standard deviation of 2.0. The upper and lower bands of the Bollinger Bands serve as dynamic resistance and support levels, respectively. The RSI indicator is employed to gauge the strength of price momentum. The strategy also incorporates a 50-period moving average (MA) to help identify the overall trend direction. When the price is above the MA, it suggests an uptrend, and when the price is below the MA, it suggests a downtrend. The entry conditions for long trades are when the RSI is above the overbought level and there is no contraction in the Bollinger Bands. For short trades, the entry conditions are when the RSI is below the oversold level and there is no contraction in the Bollinger Bands. The exit conditions for long trades are when the RSI drops below the overbought level or when the price closes below the 50-period MA. For short trades, the exit conditions are when the RSI goes above the oversold level or when the price closes above the 50-period MA. The strategy generates alerts for potential long and short entry signals, as well as for exit signals when the specified conditions are met. These alerts can be used to receive notifications or take further actions, such as placing trades manually or using automated trading systems. It is important to note that this strategy serves as a starting point and should be thoroughly backtested and validated with historical data before applying it to live trading. Additionally, it is recommended to consider risk management techniques, including setting appropriate stop-loss and take-profit levels, to effectively manage trades.
Estratégia Pine Script®
por Ollieinvesting
Enhanced Bollinger Bands Strategy with SL/TP// Title: Enhanced Bollinger Bands Strategy with SL/TP // Description: // This strategy is based on the classic Bollinger Bands indicator and incorporates Stop Loss (SL) and Take Profit (TP) levels for automated trading. It identifies potential long and short entry points based on price crossing the lower and upper Bollinger Bands, respectively. The strategy allows users to customize several parameters to suit different market conditions and risk tolerances. // Key Features: // * **Bollinger Bands:** Uses Simple Moving Average (SMA) as the basis and calculates upper and lower bands based on a user-defined standard deviation multiplier. // * **Customizable Parameters:** Offers extensive customization, including SMA length, standard deviation multiplier, Stop Loss (SL) in pips, and Take Profit (TP) in pips. // * **Long/Short Position Control:** Allows users to independently enable or disable long and short positions. // * **Stop Loss and Take Profit:** Implements Stop Loss and Take Profit levels based on pip values to manage risk and secure profits. Entry prices are set to the band levels on signals. // * **Visualizations:** Provides options to display Bollinger Bands and entry signals on the chart for easy analysis. // Strategy Logic: // 1. **Bollinger Bands Calculation:** The strategy calculates the Bollinger Bands using the specified SMA length and standard deviation multiplier. // 2. **Entry Conditions:** // * **Long Entry:** Enters a long position when the closing price crosses above the lower Bollinger Band and the `Enable Long Positions` setting is enabled. // * **Short Entry:** Enters a short position when the closing price crosses below the upper Bollinger Band and the `Enable Short Positions` setting is enabled. // 3. **Exit Conditions:** // * **Stop Loss:** Exits the position if the price reaches the Stop Loss level, calculated based on the input `Stop Loss (Pips)`. // * **Take Profit:** Exits the position if the price reaches the Take Profit level, calculated based on the input `Take Profit (Pips)`. // Input Parameters: // * **SMA Length (length):** The length of the Simple Moving Average used to calculate the Bollinger Bands (default: 20). // * **Standard Deviation Multiplier (mult):** The multiplier applied to the standard deviation to determine the width of the Bollinger Bands (default: 2.0). // * **Enable Long Positions (enableLong):** A boolean value to enable or disable long positions (default: true). // * **Enable Short Positions (enableShort):** A boolean value to enable or disable short positions (default: true). // * **Pip Value (pipValue):** The value of a pip for the traded instrument. This is crucial for accurate Stop Loss and Take Profit calculations (default: 0.0001 for most currency pairs). **Important: Adjust this value to match the specific instrument you are trading.** // * **Stop Loss (Pips) (slPips):** The Stop Loss level in pips (default: 10). // * **Take Profit (Pips) (tpPips):** The Take Profit level in pips (default: 20). // * **Show Bollinger Bands (showBands):** A boolean value to show or hide the Bollinger Bands on the chart (default: true). // * **Show Entry Signals (showSignals):** A boolean value to show or hide entry signals on the chart (default: true). // How to Use: // 1. Add the strategy to your TradingView chart. // 2. Adjust the input parameters to optimize the strategy for your chosen instrument and timeframe. Pay close attention to the `Pip Value`. // 3. Backtest the strategy over different periods to evaluate its performance. // 4. Use the `Enable Long Positions` and `Enable Short Positions` settings to customize the strategy for specific market conditions (e.g., only long positions in an uptrend). // Important Notes and Disclaimers: // * **Backtesting Results:** Past performance is not indicative of future results. Backtesting results can be affected by various factors, including market volatility, slippage, and transaction costs. // * **Risk Management:** This strategy is provided for informational and educational purposes only and should not be considered financial advice. Always use proper risk management techniques when trading. Adjust Stop Loss and Take Profit levels according to your risk tolerance. // * **Slippage:** The strategy takes into account slippage by specifying a slippage parameter on the `strategy` declaration. However, real-world slippage may vary. // * **Market Conditions:** The performance of this strategy can vary significantly depending on market conditions. It may perform well in trending markets but poorly in ranging or choppy markets. // * **Pip Value Accuracy:** **Ensure the `Pip Value` is correctly set for the specific instrument you are trading. Incorrect pip value will result in incorrect stop loss and take profit placement.** This is critical. // * **Broker Compatibility:** The strategy's performance may vary depending on your broker's execution policies and fees. // * **Disclaimer:** I am not a financial advisor, and this script is not financial advice. Use this strategy at your own risk. I am not responsible for any losses incurred while using this strategy.
Estratégia Pine Script®
por Salaryman_G
FX Session High/Low Bands - Last 5 EST Days FX Session High/Low Bands - Last 5 Days Description: This indicator plots horizontal bands representing the high and low price levels from the major forex trading sessions over the last 5 days. It helps traders identify key support and resistance zones based on recent session activity. Features: Multiple Session Tracking: Displays high/low levels for major FX sessions: Asian Session (Tokyo) European Session (London) US Session (New York) 5-Day Lookback: Captures the highest high and lowest low from each session over the previous 5 trading days Visual Bands: Clear horizontal lines or filled zones showing session boundaries Dynamic Updates: Automatically recalculates as new session data becomes available How to Use: Support/Resistance: Previous session highs/lows often act as key price levels Breakout Trading: Watch for price breaking above/below session bands Range Trading: Trade within the bands during consolidation periods Session Overlap: Pay attention to multiple session bands converging Ideal For: Forex day traders Session-based trading strategies Support/resistance identification Multi-timeframe analysis
Indicador Pine Script®
por drlicht1
LA - EMA Bands with MTF DashboardDetailed Explanation of the LA - EMA Bands with MTF Dashboard Indicator This custom Pine Script v6 indicator, designed for Trading View, overlays EMA-based price channels on the chart while incorporating a multi-timeframe (MTF) dashboard for broader market context. It focuses on visualizing trend direction and momentum through three sets of EMA bands, each representing different time horizons, and extends this with a tabular dashboard that summarizes signals across user-selected timeframes. The bands help identify support, resistance, and trend shifts, while the dashboard provides at-a-glance alignment across multiple periods, aiding in confirming trades or spotting divergences. Unlike volatility-based channels (e.g., Bollinger or Keltner), it relies solely on EMAs for simplicity and lag-reduced responsiveness. Inputs Section The script begins with user-configurable options grouped for ease. A timeframe input allows specifying a resolution for the EMA bands' data fetching, defaulting to the chart's timeframe if left empty—this enables higher-timeframe overlays on lower charts for context. Next, a shared source input defines the price data for all midlines, defaulting to the midpoint of high and low (hl2) but customizable to close, open, or others. The EMA bands have dedicated toggles and length inputs for each of the three sets: the first (long-term) defaults to 144 periods, the second (medium-term) to 72, and the third (short-term) to 12. These are inlined for compact settings panels, with minimum lengths of 1 to prevent errors. A boolean toggle controls the visibility of the MTF dashboard. Following this are nine pairs of inputs for dashboard timeframes: each pair includes a show/hide toggle and an editable timeframe string (e.g., '1' for 1-minute, 'D' for daily). Defaults progress from short (1, 3, 5 minutes) to longer (15, 30, 60 minutes, daily, weekly, monthly), grouped in inlines for organization. Only enabled and non-empty timeframes appear in the dashboard. Helpers Section Two utility functions are defined here. The first computes an EMA on any source series over a specified length using Trading View's built-in function, reused throughout for midlines and bands. The second function generates a signal string ("B" for buy/bullish, "S" for sell/bearish, or "-" for neutral) based on the direction of an EMA applied to high prices. It compares the current EMA value to the previous one, mirroring the band fill logic for consistency in the dashboard. Core Components per Band Set: Midline: An EMA calculated on a user-selectable source price (default: hl2, which is the midpoint between high and low prices). This acts as the central trend line. Upper Band: An EMA applied directly to the high prices of each bar. Lower Band: An EMA applied to the low prices of each bar. These form a channel that captures the smoothed range of price action, highlighting potential support (lower band), resistance (upper band), and overall trend direction (midline). Multiple Band Sets: The indicator includes three independent EMA band sets, each with its own length parameter for customization: EMA1 (default length: 144) – Focuses on long-term trends. EMA2 (default length: 72) – Targets medium-term trends. EMA3 (default length: 12) – Emphasizes short-term momentum. Each set can be toggled on or off via input checkboxes, allowing users to reduce chart clutter if needed. Visual Elements: Midline Plot: Displayed as a line colored based on its direction compared to the previous bar: green for rising (bullish), red for falling (bearish), and black for neutral (flat). Band Fill: The area between the upper and lower bands is filled with a semi-transparent color indicating the trend of the upper band: light green for rising (suggesting expanding highs/upward momentum) and light pink for falling (contracting highs/downward pressure). The bands themselves are plotted in blue with a thin linewidth. Multi-Timeframe Support: Users can input a custom timeframe (e.g., 'D' for daily), and the indicator fetches data from that resolution. This enables higher-timeframe context on lower-timeframe charts, such as viewing daily EMA bands on a 1-hour chart. Calculation Mechanics: All EMAs are computed using Trading View's built-in ta.ema() function. Data is retrieved in a single request.security() call for efficiency, with lookahead enabled to avoid repainting. No multipliers or volatility adjustments are included, making it a simple EMA-based envelope rather than a true volatility channel. In practice, this indicator helps traders identify trend strength, potential breakouts (price crossing bands), or mean-reversion opportunities (price bouncing within bands). It's particularly useful for swing or position trading where multi-period alignment (e.g., all midlines green) signals conviction. Pros Multi-Period Insight: By combining short (12), medium (72), and long (144) periods, it offers a layered view of trends across time horizons, helping confirm alignments or divergences without needing multiple separate indicators. Visual Clarity: Color-coded trends and fills make it easy to spot bullish/bearish shifts at a glance, reducing analysis time. Flexibility: Custom timeframe input allows for multi-timeframe analysis, while shared source and toggles provide user control. Simplicity and Efficiency: Purely EMA-based, it's computationally light and avoids overcomplication, making it accessible for beginners while still useful for spotting channel-based setups like squeezes or expansions. No Repainting: With lookahead, plots are stable once bars close. Cons Lagging Nature: EMAs inherently lag price action, especially longer ones like 144-period, which may cause delayed signals in fast-moving or ranging markets. Lack of Volatility Adjustment: Unlike Keltner Channels or Bollinger Bands, it doesn't incorporate ATR or standard deviation, so bands may not accurately reflect true volatility—potentially leading to false breakouts in high-volatility environments. Chart Clutter: Displaying all three band sets simultaneously can overcrowd the chart, particularly on lower timeframes or volatile assets. Subjective Interpretation: Color changes and band interactions require trader discretion; there's no built-in alerting or quantitative signals, which might lead to inconsistent results. Market Dependency: Defaults may not suit all assets (e.g., stocks vs. crypto); shorter periods like 12 could whipsaw in noisy markets, while 144 might be too slow for intraday trading. Justification for Default Values (12, 72, and 144) The default lengths of 12, 72, and 144 are not arbitrary but draw from established trading principles, particularly W.D. Gann's geometric and numerical theories, as well as Fibonacci sequences, to create a harmonic progression for short-, medium-, and long-term analysis. Here's the rationale: 12 (Short-Term): This is a common period for capturing recent momentum in technical indicators, often seen in setups like the MACD (which uses 12- and 26-day EMAs). It aligns with natural cycles, such as the 12 months in a year, and in Gann theory, 12 serves as a base unit for squaring price and time (e.g., in the "Square of 12" where multiples like 12, 24, etc., measure cycles in days, weeks, or months). At 12 periods, the EMA reacts quickly to price changes without excessive noise, making it ideal for short-term trend detection. 72 (Medium-Term): This acts as an intermediate bridge, derived from Gann's divisions of the 360-degree circle (a key Gann concept representing a full cycle). Specifically, 72 is 360/5 (relating to pentagonal geometry and natural harmonics) and appears in Gann's time cycle measurements (e.g., as a multiple in the Square of 12: 12×6=72). It's roughly half of 144, providing a balanced midpoint for medium-term trends without overlapping too closely with the others. In practice, 72 periods smooth out short-term fluctuations while still responding to developing trends. 144 (Long-Term): This is a powerhouse number in trading lore, being both 12 squared (12×12=144, central to Gann's "Square of 144" for monthly charts and major cycle turns, as there are 12 months in a year) and a Fibonacci sequence value (1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144...). Fibonacci periods are popular in moving averages for their alignment with natural growth patterns in markets, and 144 is often used for long-term regime definition (e.g., confirming trends over 144 bars). It helps identify major support/resistance in extended cycles. Overall, these values form a geometric/harmonic series (12, 72=12×6, 144=12×12), promoting alignment with market cycles as per Gann and Fibonacci principles, rather than generic lengths like 50 or 200. They can be adjusted based on the asset or timeframe, but the defaults provide a starting point rooted in time-tested trading numerology for balanced multi-period analysis. Please use this along with other indicators (eg. Pivot, MACD, etc) for better results.
Indicador Pine Script®
por aravindleo_45
1
Standard Error Bands**Standard Error Bands Indicator: A Statistically Robust Tool for Trend Analysis** The Standard Error Bands (SEB) indicator is a powerful technical analysis tool designed to help traders identify and assess trends with greater accuracy. Unlike traditional band indicators (e.g., Bollinger Bands) that rely on price averages, SEB leverages linear regression and statistical measures of volatility to offer deeper insights into market dynamics. **How It Works** 1. **Linear Regression:** The indicator first calculates a linear regression line to model the underlying price trend. This line represents the "best fit" of price data over the specified lookback period. 2. **Standard Error:** Next, it calculates the standard error of the regression. This statistical measure quantifies the average distance between actual prices and the regression line, effectively acting as a volatility gauge. 3. **Smoothing:** Both the linear regression line and the standard error values are smoothed using a Simple Moving Average (SMA) to reduce noise and enhance the visual clarity of the bands. 4. **Band Construction:** The upper and lower bands are formed by adding/subtracting a multiple of the smoothed standard error from the smoothed linear regression line. The default multiplier is 2, representing approximately 95% of price action expected within the bands under normal market conditions. **Key Insights** * **Trend Strength:** Tight bands suggest a strong, well-defined trend with low volatility. Prices tend to adhere closely to the regression line, indicating a high probability of trend continuation. * **Trend Weakness/Change:** Widening or expanding bands signal increased volatility and potential trend weakness. Prices deviating from the regression line may suggest an impending trend reversal or a shift into a sideways consolidation phase. * **Entry/Exit Signals:** * Consider entering a trade when prices break out of the bands in the direction of the trend, especially if the bands were previously tight. * Conversely, consider exiting a trade when prices pierce the bands against the trend or when the bands start to widen significantly. **Use Cases** * **Trend Identification:** SEB can help traders identify trends earlier and more accurately than moving average-based indicators. * **Trend Confirmation:** The bands can be used to confirm the validity and strength of an existing trend. * **Volatility Assessment:** Changes in band width provide valuable insights into market volatility, aiding risk management decisions. * **Entry/Exit Timing:** SEB can be incorporated into trading strategies to generate timely entry and exit signals. **Important Considerations** * **Parameter Optimization:** Experiment with different lookback periods, smoothing values, and standard error multipliers to find the optimal settings for your preferred trading style and market conditions. * **Supplementary Indicators:** Combine SEB with other technical indicators (e.g., momentum oscillators, volume analysis) for a more comprehensive market assessment. * **Backtesting:** Thoroughly backtest any SEB-based trading strategy to ensure its effectiveness before deploying it in live markets. **Disclaimer:** Technical indicators like SEB are valuable tools but should not be used in isolation. Always consider price action or fundamental factors and risk management principles when making trading decisions.
Indicador Pine Script®
por Diagnosis_Analytics
1
Bollinger Bands + B%Overview This script replicates the robust functionality and visual style of the Bollinger Band studies found in Sierra Chart, adapted for the TradingView environment. It is designed as an "All-in-One" suite that calculates the Bollinger Bands for the main price chart while simultaneously offering advanced oscillator studies (like %B and Bandwidth) in the pane below. A unique feature of this script is the high degree of customization, particularly the ability to choose different Moving Average types for the Bollinger Band basis, and a dynamic coloration system for the %B indicator. Key Features Main Chart Overlay: Draws the Bollinger Bands (Upper, Lower, and Basis) directly on the price chart, even though the script runs in a separate pane. Advanced %B Indicator: A visually enhanced version of Bollinger Bands %B. It features dynamic coloring based on a midline (default 0.5) and intensifies the colors when the value exceeds the high or low thresholds (simulating a band breakout). Bollinger Bandwidth: Optional display of the bandwidth to measure volatility (Squeeze detection). Customizable Calculation: Choose from 6 different Moving Average types to calculate the bands. Moving Average Types Explained The standard Bollinger Band uses a Simple Moving Average (SMA). This script allows you to change the mathematical basis of the bands to fit your specific trading strategy: Simple (SMA): The standard calculation. Every price in the period has equal weight. Best for general use. Exponential (EMA): Gives more weight to recent prices. Reacts faster to price changes than the SMA. Weighted (WMA): Assigns a linear weighting factor. Recent data is more important, but the drop-off is smoother than EMA. Linear Regression (LSMA): Calculates a linear regression line for each point. This is excellent for identifying the prevailing trend direction and "fitting" the price action. Wilders (RMA): The smoothing method used in the RSI indicator. It reacts very slowly and smooths out significant noise. Smoothed (SMMA): A blend that takes a broad view of price history. It is very stable and filters out minor market fluctuations effectively. Settings & Parameters 1. Bollinger Bands (Price-Chart) Show BB in Main Chart: Toggles the visibility of the bands on the price candles. Length: The lookback period for the bands (Default: 20). Standard Deviation: The multiplier for the width of the bands (Default: 2.0). Moving Average Type: Select the algorithm for the center line (Basis). 2. Study: Bollinger Bands %B Show %B: Toggles the %B oscillator. High/Low Threshold: Sets the levels for the "Breakout" warnings (Default: 1.0 and 0.0). Midline: The center point for the color switch (Default: 0.5). Green: Value > Midline. Red: Value < Midline. Bright Green/Red: Value crosses the High/Low Thresholds. 3. Study: Bollinger Bandwidth Show Bandwidth: Toggles the volatility measurement line. Usage Tip: Since %B (0.0 - 1.0) and Bandwidth (variable scale) use different y-axis scales, it is recommended to only enable one sub-study at a time via the checkboxes to maintain a clean chart view. Disclaimer : This script is for educational and analytical purposes only. It is a code conversion based on public documentation of Sierra Chart Study ID 14 & 136. Sierra Chart, best trading software, EVER! With the best datafeet. Denali Exchange Data Feed.
Indicador Pine Script®
por p_zerbst
Supertrend with BandsSUPERTREND WITH UPPER AND LOWER BANDS - INDICATOR DESCRIPTION OVERVIEW: This Pine Script indicator implements the SuperTrend technical analysis tool with visible upper and lower bands. SuperTrend is a trend-following indicator that helps traders identify the current market direction and potential entry/exit points. HOW IT WORKS: The indicator uses the Average True Range (ATR) to calculate dynamic support and resistance bands around the price: 1. BASIC BANDS CALCULATION: - Upper Band = HL2 + (ATR × Multiplier) - Lower Band = HL2 - (ATR × Multiplier) - HL2 = (High + Low) / 2 2. FINAL BANDS ADJUSTMENT: - Bands are adjusted based on price movement to create a trailing stop mechanism - Upper band only moves down or stays flat when price is above it - Lower band only moves up or stays flat when price is below it 3. SUPERTREND LINE: - Switches between upper and lower bands based on price crossovers - When price is above the SuperTrend line = UPTREND (green) - When price is below the SuperTrend line = DOWNTREND (red) KEY FEATURES: ✓ Visual upper and lower bands showing the ATR-based zones ✓ Color-coded SuperTrend line (green for uptrend, red for downtrend) ✓ Buy/Sell signals when trend changes ✓ Customizable ATR period and multiplier ✓ Background color indication of current trend ✓ Built-in alerts for trend changes ✓ Toggle options for bands and signals DEFAULT PARAMETERS: - ATR Period: 10 - ATR Multiplier: 3.0 USAGE: - Lower multiplier (1.5-2.5) = More sensitive, more signals, more noise - Higher multiplier (3.5-5.0) = Less sensitive, fewer signals, filters noise - Use in conjunction with other indicators for confirmation - Best suited for trending markets TRADING SIGNALS: - BUY: When price closes above the upper band (trend changes from down to up) - SELL: When price closes below the lower band (trend changes from up to down) Note: This indicator is based on the classic SuperTrend algorithm and should be used as part of a comprehensive trading strategy, not as a standalone signal.
Indicador Pine Script®
por maravinthkumar
Swing T3 Ribbon with Dynamic Bandswing T3 Ribbon with Dynamic Bands This indicator combines T3 moving averages with a dynamic Bollinger-style ribbon to highlight early trend changes and volatility-driven price moves. Key Features: T3 Ribbon: Fast T3 vs. Slow T3 shows trend direction; ribbon color is green for bullish, red for bearish. Dynamic Bands: Bands fluctuate with recent price volatility, similar to Bollinger Bands, providing a visual guide for overbought/oversold areas. Early Swing Markers: E0 (Early Upswing): Price above top band while trend is temporarily bearish. Ex (Early Downswing): Price below bottom band while trend is temporarily bullish. Alerts: Early upswing (E0) Early downswing (Ex) Price crossing the bottom (red) band from below. Purpose: Helps traders detect early trend reversals or price breakouts in the context of volatility. Dynamic bands adapt to changing market conditions, giving a more responsive signal than fixed-width ribbons.
Indicador Pine Script®
por sup2rule443
2
RSI Bands with Volume and EMAThis script is a comprehensive technical analysis tool designed to help traders identify key market signals using RSI bands, volume, and multiple Exponential Moving Averages (EMAs). It overlays the following on the chart: RSI Bands: The script calculates and plots two bands based on the Relative Strength Index (RSI), indicating overbought and oversold levels. These bands act as dynamic support and resistance zones: Resistance Band (Upper Band): Plotted when the RSI exceeds the overbought level, typically indicating a potential sell signal. Support Band (Lower Band): Plotted when the RSI falls below the oversold level, typically indicating a potential buy signal. Midline: The average of the upper and lower bands, acting as a neutral reference. Buy/Sell Labels: Labels are dynamically added to the chart when price reaches the overbought or oversold levels. A "Buy" label appears when the price reaches the oversold (lower) band. A "Sell" label appears when the price reaches the overbought (upper) band. Volume Indicator: The script visualizes trading volume as histograms, with red or green bars representing decreasing or increasing volume, respectively. The volume height is visually reduced for better clarity and comparison. Exponential Moving Averages (EMAs): The script calculates and plots four key EMAs (12, 26, 50, and 200) to highlight short-term, medium-term, and long-term trends: EMA 12: Blue EMA 26: Orange EMA 50: Purple EMA 200: Green The combined use of RSI, volume, and EMAs offers traders a multi-faceted view of the market, assisting in making informed decisions about potential price reversals, trends, and volume analysis. The script is particularly useful for identifying entry and exit points on charts like BTC/USDT, although it can be applied to any asset.
Indicador Pine Script®
por StickyBurgherz
Multi Bollinger Bands with Background FillMulti Bollinger Bands with Background Fill 多組帶狀背景布林通道 This indicator plots six independent Bollinger Bands channels on the price chart, each fully configurable with customizable period length, standard deviation, and colors for upper, lower, and middle bands. Users can choose to display or hide each channel and its middle band independently. A distinctive feature of this tool is the option to enable colored background fills between paired Bollinger Bands (channels 1&2, 3&4, and 5&6) to visually highlight volatility zones, improving the clarity of price action and aiding in multi-timeframe volatility analysis. Key Features: Six independent Bollinger Bands channels with separate visibility toggles. Adjustable length and standard deviation for each channel. Option to display or hide the middle band (basis) for each channel. Unique colored background fills between paired upper and lower bands for enhanced visual interpretation. Custom color settings for each band and background for better differentiation. This indicator is designed for traders looking for advanced multi-layered volatility insights and clearer visual guidance when analyzing price behavior across different timeframes. It is suitable for various trading strategies including trend analysis and volatility-based setups.
Indicador Pine Script®
por chingyu_ku
Bollinger BandsThis indicator is a locked Bollinger Band system designed around a long-term volatility envelope. It uses an EMA(100) as the central “basis” line and builds the upper and lower bands at 3.5 standard deviations from the basis, creating a wide channel that highlights extreme price expansion rather than frequent mean-reversion touches. In addition to the standard bands, the script plots two intermediate guide lines located at 33.33% of the distance from the basis toward the upper and lower bands. These 1/3-zone lines help visually segment the band into core, mid, and extreme areas, making it easier to judge how far price has stretched relative to the EMA and current volatility. Traders can use the basis as a trend reference, the 33.33% lines as “early extension” or pullback checkpoints, and the outer bands as high-stretch boundaries for risk management, scaling, and contextual decision-making on intraday charts.
Indicador Pine Script®
por xuziyu409