Começar

Médias Móveis

Advanced Algo [From India]Here is a **shortened, more concise, and TradingView-ready version** of the description, with **“TG – SWIFT Algo V1.1” replaced by “Advanced Algo ”** and explanations tightened while keeping clarity and professionalism. --- 🙏 Introduction & Gratitude > *I have taken so much from this TradingView community over the years — ideas, learning, and inspiration. > It’s time to give back a small contribution with gratitude.* **Advanced Algo ** is a **non-repainting, rule-based intraday indicator** designed primarily for **crypto markets**, optimized for **5-minute and 15-minute timeframes**. The goal is to provide **clean signals, disciplined trade structure, and consistent execution logic**. --- 📌 Indicator Overview **Advanced Algo **: * Generates **confirmed BUY / SELL signals** * Automatically plots **Entry, Take-Profit, and Stop-Loss levels** * Maintains **one active trade at a time** to avoid over-trading * Tracks results via a **lightweight statistics table** This is a **decision-support tool**, not a prediction system or financial advice. --- ## ⚙️ High-Level Logic ### 1️⃣ Adaptive Moving Average Engine The indicator compares two adaptive moving averages: * **Fast MA** (close-based) * **Slow MA** (open-based) Selectable MA types: * **TEMA** * **Hull MA** * **ALMA** (default – low lag & smooth) A small **price delay** is applied to ensure **true non-repainting behavior**. --- ### 2️⃣ Signal Generation (Confirmed Bars Only) * **BUY** → Fast MA crosses above Slow MA * **SELL** → Fast MA crosses below Slow MA Signals are generated **only after candle confirmation**. --- ### 3️⃣ Trade Lifecycle Control Once a trade starts: * Entry price is fixed * TP & SL are calculated using percentage inputs * No new trades are allowed until the current trade exits This prevents signal clustering and emotional over-trading. --- ### 4️⃣ Intrabar TP & SL Handling Although entries are bar-confirmed: * **Take-Profit and Stop-Loss execute intrabar** * Trades exit immediately when price is touched This closely matches real-market behavior on lower timeframes. --- ## 📊 Visuals & Statistics * **Blue** → Entry * **Purple** → Take Profit * **Maroon** → Stop Loss * Green & red fills show reward and risk zones Optional labels mark: * Entries * TP hits * SL hits A simple stats table tracks: * Buy TP / Sell TP * Buy SL / Sell SL --- ## ⏱ Recommended Usage **Best suited for:** * Crypto markets (BTC, ETH, liquid altcoins) * **5m and 15m timeframes** * Trending or moderately volatile conditions **Tips:** * Start with default settings * Adjust TP & SL based on volatility * Avoid low-volume or highly ranging markets --- ## 🔔 Alerts & Automation The script includes structured alerts for: * Entries * TP & SL exits These can be used for **manual alerts or automated execution workflows**. --- ## ⚠️ Disclaimer * No indicator guarantees profits * Always backtest and forward-test before live trading * Proper risk management is essential This script is shared **for educational and analytical purposes only**. --- ## 🤝 Closing Note If this tool adds structure or clarity to your trading, then it has fulfilled its purpose. Feedback and constructive suggestions are always welcome. **Trade responsibly and stay disciplined.**
Indicador Pine Script®
por sanjaybiligiri
3
KAMA Oscillator | IkkeOmarThis script transforms the Kaufman Adaptive Moving Average (KAMA) into an oscillator format, designed to visualize trend direction with reduced noise sensitivity. It operates in two modes: a Raw mode that tracks price levels directly, and a Normalized mode that bounds the oscillator between -1 and +1 for easier comparison across assets. The calculations are the same as for the Normalized KAMA Oscillator, but I added a few features that users of the old version wouldn't necessarily want. How it works Efficiency Ratio (ER): The script calculates the "efficiency" of price movement by comparing the net direction of price to the total volatility over a set period. Adaptive Smoothing: When volatility is high but direction is unclear (choppy), the KAMA slows down to filter noise. When price trends clearly, the KAMA speeds up to track the move. Normalization (Optional): If enabled, the script takes the raw KAMA value and scales it relative to its highest and lowest points over the Normalization lookback period. The result oscillates between -1 (extreme low) and +1 (extreme high). The SMA Signal Logic The script allows you to overlay an SMA (Simple Moving Average) on the oscillator. This serves as a dynamic baseline for the oscillator's momentum. Signal Generation: A signal is generated when the KAMA Oscillator crosses its SMA. Bullish: Oscillator crosses above the SMA. Bearish: Oscillator crosses below the SMA. Lag vs. Noise Trade-off: Advantage (Reduced Lag): Crossing the SMA often triggers a signal earlier than waiting for the oscillator to change color (slope change) or cross the zero line. It identifies when immediate momentum is outperforming the recent average. Risk (Increased Noise): During consolidation, the oscillator will hover close to the SMA line. This increases the probability of "whipsaws" (false signals) where the line crosses back and forth rapidly without a sustained trend. This signal is aggressive and should be used with trend filters.
Indicador Pine Script®
por IkkeOmar
MA Crossover with R SquaredThis indicator enhances the classic Moving Average (MA) crossover strategy with statistical filtering and prediction capabilities. Let me explain what it does: Instead of just showing when a fast MA crosses above/below a slow MA, this indicator adds R² (R-squared) filtering to identify higher-quality crossovers and predicts future crossovers. What is R²? R² (Coefficient of Determination) is a statistical measure that shows how well one variable explains the movement of another variable. In simpler terms: R² = 1.0: Perfect relationship - 100% of the movement in one MA is explained by the other MA R² = 0.8: Strong relationship - 80% R² = 0.5: Moderate relationship - 50% R² = 0.0: No relationship - 0% Imagine two cars driving on a highway: High R² (0.9): Both cars are in the same lane, moving together consistently Low R² (0.3): One car is weaving between lanes while the other stays straight - poor coordination. Traditional MA crossovers often generate false signals during: Choppy markets (price bouncing around) Sideways/ranging markets Low volatility periods News events causing temporary spikes The R² Solution: R² acts as a "quality filter" that answers: "How meaningful this crossover is?" What this means: Before R² filtering: Every crossover generates a signal After R² filtering: Only crossovers with R² > threshold generate signals Result: Fewer but higher-quality signals. MARKET REGIME DETECTION High R² (> 0.7): Strong trending market - MA crossovers are reliable Medium R² (0.4-0.7): Moderate trending - use with caution Low R² (< 0.4): Choppy/range-bound market - avoid MA crossover signals Increasing R²: MAs are converging/moving together more closely Decreasing R²: MAs are diverging/losing coordination Sudden R² drop: Potential market regime change. Why Square the Correlation? Correlation: Measures direction AND strength (-1 to +1) R²: Measures strength ONLY (0 to 1) In trading: We care about relationship strength, not direction Direction is already indicated by crossover type (bullish/bearish) Real-World Interpretation: If R² = 0.64, it means: 64% of the variation in the fast MA is explained by the slow MA 36% is "noise" or unexplained movement The MAs are moderately coordinated. R² Trend Confirmation: Entry: When crossover occurs AND R² is above threshold Confirmation: R² continues rising after entry Exit: R² drops below threshold (relationship weakening) Multi-Timeframe R² Analysis Check R² on higher timeframe for trend context Use current timeframe for entry signals Example: Daily R² > 0.7 gives bullish bias, use 1-hour for entries. R² LIMITATIONS & CAUTIONS 1. Lagging Nature R² is calculated from past data By the time R² is high, the trend may already be established 2. Not a Standalone Indicator R² should confirm other signals, not generate them alone Always combine with price action, volume, support/resistance 3. Curve Fitting Risk Don't over-optimize R² thresholds on historical data What worked in the past may not work in the future Use R² as a filter, not a predictor 4. Market-Specific Behavior R² thresholds that work in trending stocks may fail in Forex Cryptocurrencies may require different R² settings than commodities Always test on your specific market/instrument Before Taking Any Signal: ✅ Does the crossover have a colored circle? (R² > threshold) ✅ What's the R² number shown? (Higher = better) ✅ Is R² rising or falling? (Rising = strengthening relationship) ✅ Check history table - what happened with similar R² values? ✅ Consider prediction - does it align with current signal? Simple R² Rules of Thumb: R² > 0.8: Excellent signal quality R² 0.6-0.8: Good signal quality R² 0.4-0.6: Moderate - use additional confirmation R² < 0.4: Poor - avoid or use extreme caution Think of R² as: A quality control inspector for MA crossovers A relationship therapist for your moving averages A statistical bouncer that only lets strong signals through Higher win rate + Better risk/reward = More profitable trading This script transforms the basic "when lines cross" approach into a sophisticated, statistically-validated trading system. R² is the secret sauce that separates random crossovers (Golden/Death) from meaningful trend changes. DISCLAIMER: This information is provided for educational purposes only and should not be considered financial, investment, or trading advice. Please do boost if you like it. Happy Trading.
Indicador Pine Script®
por kingshukghosh71
LR Candles V2.1IMPORTANT: Use this strategy only with Heikin Ashi candles; otherwise, the results will be negative. The use of this strategy is solely and exclusively under the responsibility of the operator. To perform testing correctly and as close to market reality as possible, we suggest setting the strategy preferences as follows: Slippage = 3 Using bar magnifico = Enabled Commission = Completed Detail: It is important to include at least 1,000 trades in the test. This provides a certain robustness in the historical analysis of a strategy. Values lower than this may alter the expected results when trading in real life. Tip: Play around with different time frames and calibrations on the strategic indicator. Examples include unchecking Ling-Reg, unchecking EMA, or using both in combination. Look for the best probability and results for a specific asset. The strategy usually performs well on time frames longer than 1 hour; this is what has been observed.
Estratégia Pine Script®
por roykreuzer
Squeeze Momentum with Trend Exhaustion# Squeeze Momentum + Trend Exhaustion Indicator ## Complete User Manual --- ## Table of Contents 1. (#what-this-indicator-does) 2. (#visual-components) 3. (#market-states) 4. (#how-to-read-signals) 5. (#trading-examples) 6. (#configuration-guide) 7. (#best-practices) --- ## What This Indicator Does This indicator combines two powerful concepts to identify complete market cycles: ### 1. Squeeze Momentum (LazyBear) Detects **volatility compression** (consolidation) and subsequent **expansion** (breakout). **Think of it like:** A spring being compressed, then released. ### 2. Multi-Timeframe Trend Exhaustion Measures how far price has moved from its moving averages across multiple timeframes. **Think of it like:** A rubber band being stretched—eventually it must snap back. ### The Complete Cycle ``` Consolidation → Breakout → Trend → Exhaustion → Reversion → Consolidation ``` This indicator shows you exactly where you are in this cycle. --- ## Visual Components ### Main Panel (Bottom) | Element | What It Looks Like | Meaning | |---------|-------------------|---------| | **Colored Bars** | Green/Red histogram | Momentum strength and direction | | **Filled Area** | Yellow/Lime/Red gradient area | Price extension from moving averages | | **Cross at Zero** | Black/Gray/Blue cross | Squeeze state (volatility) | | **Dashed Lines** | Horizontal red/green lines | Extension thresholds (±2σ scaled) | --- ### 1. Momentum Histogram (Colored Bars) | Color | Direction | Meaning | |-------|-----------|---------| | **Bright Green** (Lime) | Up ↑ | Strong bullish momentum (increasing) | | **Dark Green** | Up ↑ | Weak bullish momentum (decreasing) | | **Bright Red** | Down ↓ | Strong bearish momentum (increasing) | | **Dark Red** (Maroon) | Down ↓ | Weak bearish momentum (decreasing) | **Key insight:** When bars change from bright to dark, momentum is fading. --- ### 2. Extension Area (Filled Gradient) Shows how extended price is from its moving averages across 5 timeframes (5m, 15m, 1h, 4h, Daily). | Color | Position | Meaning | |-------|----------|---------| | **Red** | High above zero | Severely overbought (>2σ scaled) | | **Orange/Yellow** | Above zero | Moderately overbought | | **Lime/Green** | Below zero | Moderately oversold | | **Teal** | Deep below zero | Severely oversold (<-2σ scaled) | **The area is scaled 3x** for better visibility. Actual values shown in table. **Reading it:** - **Area touching upper dashed line** = Price very far above averages (exhaustion territory) - **Area touching lower dashed line** = Price very far below averages (exhaustion territory) - **Area near zero** = Price near its averages (normal/neutral) --- ### 3. Squeeze Indicator (Cross at Zero Line) | Color | Status | Meaning | |-------|--------|---------| | **Black** ⚫ | Squeeze ON | Bollinger Bands inside Keltner Channels → Low volatility, consolidation | | **Gray** ⚪ | Squeeze OFF | Bollinger Bands outside Keltner Channels → Volatility expanding, breakout | | **Blue** 🔵 | No Squeeze | Normal volatility conditions | **Critical:** The transition from Black → Gray is where explosive moves begin. --- ### 4. Entry/Exit Signals | Symbol | Type | Meaning | |--------|------|---------| | 🔺 **Large Green Triangle** | HC Long Entry | High Confidence long setup (Squeeze OFF + Oversold + Confluence) | | 🔻 **Large Red Triangle** | HC Short Entry | High Confidence short setup (Squeeze OFF + Overbought + Confluence) | | 🔺 Small green | Medium Long | Long setup without full confluence | | 🔻 Small red | Medium Short | Short setup without full confluence | | ✕ Orange X | Exit Long | Close long positions (exhaustion detected) | | ✕ Teal X | Exit Short | Close short positions (exhaustion detected) | **Trade only the LARGE triangles** for highest probability setups. --- ## Market States The indicator identifies 7 distinct market states shown in the info table. ### State 1: 💤 CONSOLIDATION **Conditions:** - Squeeze: ON (black cross) - Extension: Near zero (±1σ) - Momentum: Contracting **What's happening:** Price is range-bound, volatility dying down. Spring is being compressed. **Action:** **WAIT.** Do not trade. Set alerts for Squeeze OFF. --- ### State 2: ⚡ BREAKOUT BULL / BEAR **Conditions:** - Squeeze: OFF (gray cross) ← **Key trigger** - Extension: Still moderate - Momentum: Strong directional move (bright green or red bars) **What's happening:** Volatility explosion. Spring released. This is the start of a new trend. **Action:** **ENTER** in direction of momentum. - ⚡ BREAKOUT BULL → Go LONG - ⚡ BREAKOUT BEAR → Go SHORT **Best scenario:** Breakout from oversold/overbought levels (confluence with exhaustion indicator). --- ### State 3: ↗️ TRENDING UP / ↘️ TRENDING DOWN **Conditions:** - Squeeze: OFF or No Squeeze - Extension: Growing (1σ to 2σ) - Momentum: Sustained strong bars **What's happening:** Trend in progress. Price moving away from averages. **Action:** **HOLD** positions. Let winners run. Don't fight the trend. --- ### State 4: ⚠️ EXTENDED UP / DOWN **Conditions:** - Extension: Above 2σ threshold - Momentum: Still strong (bright bars) - Confluence: May be weak **What's happening:** Price stretched but still has power. Caution zone. **Action:** **CAUTION.** Don't enter new positions. Tighten stops on existing positions. --- ### State 5: 🔴 EXHAUSTION BULL / 🟢 EXHAUSTION BEAR **Conditions:** - Extension: >2σ (touching dashed lines) - Momentum: Fading (bright bars turning dark) - Velocity: Decreasing - Confluence: 3/5 or better **What's happening:** Rubber band stretched to maximum. Trend running out of energy. **Action:** **EXIT** positions. - 🔴 EXHAUSTION BULL → Close LONGS, consider SHORT - 🟢 EXHAUSTION BEAR → Close SHORTS, consider LONG **This is the highest probability reversal signal.** --- ### State 6: ➡️ TRENDING (Neutral Direction) **Conditions:** - Price trending but without clear momentum direction changes **Action:** **HOLD** or wait for clearer signals. --- ### State 7: — NEUTRAL **Conditions:** - Extension near zero - No squeeze - Weak momentum **Action:** No trade. Wait for setup. --- ## How to Read Signals ### Perfect Long Entry (High Confidence ⭐) **Requirements (all must be true):** 1. ⚫→⚪ Squeeze just turned OFF (gray cross) 2. 📊 Momentum bars bright GREEN and rising 3. 🔻 Extension area BELOW lower dashed line (oversold) 4. ⭐ Confluence: 3/5 or more timeframes agree (shown as "🔻" in table) **Visual:** Large green triangle appears **What this means:** Price was oversold across multiple timeframes, consolidated, and is now breaking out upward with fresh momentum. **Entry:** Next candle after signal **Stop Loss:** Below recent consolidation low **Take Profit:** When extension area crosses back above zero, or when exit signal appears --- ### Perfect Short Entry (High Confidence ⭐) **Requirements (all must be true):** 1. ⚫→⚪ Squeeze just turned OFF (gray cross) 2. 📊 Momentum bars bright RED and falling 3. 🔺 Extension area ABOVE upper dashed line (overbought) 4. ⭐ Confluence: 3/5 or more timeframes agree (shown as "🔺" in table) **Visual:** Large red triangle appears **What this means:** Price was overbought across multiple timeframes, consolidated, and is now breaking down with fresh momentum. **Entry:** Next candle after signal **Stop Loss:** Above recent consolidation high **Take Profit:** When extension area crosses back below zero, or when exit signal appears --- ### Exit Signals #### Exit Long (Orange X) **Appears when:** - Extension area reaches upper dashed line (>2σ) - Momentum bars turning from bright green to dark green - Price losing upward velocity **Action:** Close 50-100% of position. Move stop to breakeven on remainder. #### Exit Short (Teal X) **Appears when:** - Extension area reaches lower dashed line (<-2σ) - Momentum bars turning from bright red to dark red - Price losing downward velocity **Action:** Close 50-100% of position. Move stop to breakeven on remainder. --- ### Medium Confidence Signals (Small Triangles) These appear when squeeze is OFF and momentum is directional, but: - Extension is only moderate (not extreme), OR - Confluence is weak (<3/5 timeframes) **How to trade:** - Use smaller position size (50% of normal) - Tighter stops - Only take if other factors align (support/resistance, volume, etc.) --- ## Trading Examples ### Example 1: Classic Squeeze Play into Trend ``` Step 1: CONSOLIDATION (💤) Chart: Price moving sideways for 10-20 candles Indicator: Black cross at zero (Squeeze ON) Extension: Yellow/Lime area near zero line Action: Set alert for Squeeze OFF Step 2: BREAKOUT (⚡) Chart: Strong green candle breaks resistance Indicator: Cross turns GRAY (Squeeze OFF) Bright GREEN momentum bars appear Extension area still near zero or slightly below Signal: Large green triangle appears Action: ENTER LONG Stop loss below consolidation Target: Extension upper line Step 3: TRENDING (↗️) Chart: Series of higher highs and higher lows Indicator: Momentum bars stay bright green Extension area rising toward upper line Area color transitions yellow → orange → red Action: HOLD, trailing stop Step 4: EXHAUSTION (🔴) Chart: Price makes new high but with smaller candle Indicator: Extension area touches upper dashed line Momentum bars turn DARK green (weakening) Orange X appears Table shows "EXHAUSTION BULL" Action: EXIT position Book profits Step 5: REVERSION Chart: Price falls back toward moving averages Indicator: Extension area shrinks back toward zero Red momentum bars appear Action: Wait for next setup ``` **Result:** Caught the entire trend from breakout to exhaustion. --- ### Example 2: Failed Breakout (What NOT to Trade) ``` Situation: - Squeeze OFF (gray cross) ✓ - Momentum bars bright green ✓ - BUT extension area ABOVE upper line (already overbought) ✗ - Confluence shows 1/5 (only one timeframe agrees) ✗ Indicator: Small green triangle (medium confidence) or no triangle What happens: Price makes small move up, then reverses Lesson: Don't chase extended moves even if squeeze fires. Wait for price to be on the RIGHT SIDE of the extension lines. ``` --- ### Example 3: Exhaustion Reversal Trade ``` Step 1: EXTENDED (⚠️) Chart: Strong uptrend for days Indicator: Extension area deep in red zone (>2σ) Momentum still bright green but starting to shorten Table: "EXTENDED UP" / "CAUTION LONG" Action: Watch closely, tighten stops Step 2: EXHAUSTION (🔴) Chart: Price makes final push but with decreasing volume Indicator: Momentum bars turn DARK green Orange X appears Table: "EXHAUSTION BULL" + "4/5 🔺" Action: CLOSE any longs Consider SHORT entry Step 3: SQUEEZE FORMS (Optional) Chart: Price starts consolidating Indicator: Cross turns BLACK (Squeeze ON) Extension area falling toward zero Action: Wait for Squeeze OFF to confirm reversal Step 4: BREAKOUT DOWN (⚡) Indicator: Cross turns GRAY Bright RED momentum bars Large red triangle appears Action: ENTER SHORT (reversal confirmed) ``` **Result:** Exited at the top, caught the reversal. --- ## Configuration Guide ### Recommended Settings by Timeframe #### For 4H Charts (Swing Trading) ``` Squeeze Settings: (defaults are fine) - BB Length: 20 - BB MultFactor: 2.0 - KC Length: 20 - KC MultFactor: 1.5 Exhaustion TFs: - TF1: 15m - TF2: 1h - TF3: 4h - TF4: 12h or Daily - TF5: Daily or Weekly Extension Threshold: 2.0σ Min Confluence: 3/5 ``` #### For 1H Charts (Day Trading) ``` Squeeze Settings: (defaults) Exhaustion TFs: - TF1: 5m - TF2: 15m - TF3: 1h - TF4: 4h - TF5: Daily Extension Threshold: 2.0σ Min Confluence: 3/5 ``` #### For 15m Charts (Scalping) ``` Squeeze Settings: - BB Length: 15 - KC Length: 15 Exhaustion TFs: - TF1: 1m - TF2: 5m - TF3: 15m - TF4: 1h - TF5: 4h Extension Threshold: 2.5σ (higher to avoid noise) Min Confluence: 4/5 (more strict) ``` --- ### Understanding the Table Located in top-right corner: | Row | Meaning | |-----|---------| | **Market State** | Current cycle phase (Consolidation/Breakout/Trending/Exhaustion) | | **Squeeze** | 🔴 ON / 🟢 OFF / 🔵 No | | **Momentum** | ↑ Bull / ↓ Bear / ~ Weak / — Neutral | | **Extension** | Actual value in standard deviations (σ) - NOT scaled | | **Confluence** | How many timeframes agree (X/5 🔺 or 🔻) | | **Velocity** | Speed of extension change (↑ increasing, ↓ decreasing) | | **ACTION** | What to do right now | **Most important rows:** 1. **Market State** - Quick glance at current cycle 2. **Confluence** - Determines signal quality 3. **ACTION** - Direct guidance --- ## Best Practices ### ✅ DO 1. **Wait for High Confidence signals** (large triangles) - Don't trade every small signal - Quality over quantity 2. **Use the complete cycle** - Enter on Breakout (⚡) - Hold through Trending (↗️/↘️) - Exit on Exhaustion (🔴/🟢) 3. **Respect confluence** - 4/5 or 5/5 = Excellent probability - 3/5 = Good probability - 1-2/5 = Skip 4. **Combine with price action** - Support/resistance levels - Volume confirmation - Candlestick patterns 5. **Set alerts** - "Squeeze OFF" - Don't miss breakouts - "HC Long Setup" / "HC Short Setup" - "Exit Long" / "Exit Short" 6. **Scale positions** - Enter 50% on signal - Add 25% if extension confirms - Add final 25% if momentum sustains 7. **Use proper risk management** - Stop loss: Below/above consolidation - Position size: 1-2% account risk - Take profit: Extension targets or signals --- ### ❌ DON'T 1. **Don't trade Consolidation state** - Black cross (Squeeze ON) = Wait mode - No signals during consolidation 2. **Don't chase Extended moves** - If extension already >2σ when Squeeze fires - Even if momentum looks good - Wait for reversion first 3. **Don't fight strong trends** - If extension is growing and momentum strong - Don't counter-trend trade - Wait for exhaustion signals 4. **Don't ignore velocity** - If velocity is ↑ and extension high = still dangerous - If velocity is ↓ and extension high = safer reversal 5. **Don't trade low confluence** - 1/5 or 2/5 = Different timeframes disagree - High chance of false signal 6. **Don't use blindly** - Check overall market context - Major news events can override signals - Trend on higher timeframe matters 7. **Don't overtrade** - Good setups are rare (that's why they work) - Wait for complete setup formation --- ## Quick Reference Card ### Signal Quality Checklist **⭐⭐⭐ PERFECT SETUP (Trade this)** - Squeeze just turned OFF (⚫→⚪) - Momentum bright and directional - Extension >2σ (OPPOSITE direction of entry) - Confluence ≥3/5 - Large triangle signal - Action says "LONG/SHORT ENTRY ⭐" **⭐⭐ GOOD SETUP (Trade with caution)** - Squeeze OFF - Momentum directional - Extension moderate - Confluence ≥3/5 - Small triangle or Action confirms **⭐ WEAK SETUP (Skip)** - Low confluence (<3/5) - Extension same direction as entry - Momentum weak or conflicting - Already in Extended/Exhaustion state --- ### State → Action Quick Guide | See This State | Do This | |---------------|---------| | 💤 CONSOLIDATION | Wait, set alerts | | ⚡ BREAKOUT | Enter in direction | | ↗️/↘️ TRENDING | Hold positions | | ⚠️ EXTENDED | Tighten stops, no new entries | | 🔴/🟢 EXHAUSTION | Exit, consider reversal | | — NEUTRAL | No trade | --- ## Troubleshooting **Q: Indicator shows Exhaustion but price keeps going** **A:** Check velocity and momentum. If still bright bars + velocity ↑, wait. True exhaustion needs momentum weakening. **Q: Too many false signals** **A:** Increase Min Confluence to 4/5. Use longer timeframe chart (4h instead of 1h). **Q: Missing good trades** **A:** Set alerts for "Squeeze OFF" and "HC Entry" signals. You can't watch charts 24/7. **Q: Extension area looks weird** **A:** Remember it's scaled 3x for visibility. Check table for actual values. **Q: Which timeframe is best?** **A:** 4H for swing trading, 1H for day trading. Lower = more signals but more noise. **Q: Can I use this with other indicators?** **A:** Yes! Combine with: - Volume profile - Support/resistance levels - Moving averages on chart - RSI for additional confirmation --- ## Final Thoughts This indicator gives you a complete picture of market structure: - **Where are we?** (Market State) - **Where are we going?** (Momentum) - **How far can it go?** (Extension) - **When will it reverse?** (Exhaustion) The key is **patience**. Wait for the complete setup: 1. Consolidation (⚫ Squeeze ON) 2. Breakout (⚪ Squeeze OFF) 3. Right extension direction (oversold for longs, overbought for shorts) 4. Strong confluence (3/5+) When all pieces align, you get high-probability trades with clear entries, targets, and exits. **Trade the cycle, not every wiggle.** --- ## Support & Updates For questions or suggestions, refer to the original script documentation or TradingView community. **Remember:** No indicator is perfect. Always use proper risk management and combine multiple forms of analysis. **Good trading! 📈**
Indicador Pine Script®
por Marianodipietra
Session Levels (3of3)This system is designed to strip away market noise and highlight the areas where institutional capital is actually active. Most retail traders fail because they treat every price movement with equal importance. They often enter trades in the "middle of nowhere" or get trapped by "fakeouts" at standard support/resistance levels. This tool solves: Context Blindness: It defines the "playing field" by marking institutional session boundaries (Asia, London, NY), so you know exactly where liquidity resides. Computation Lag: Standard Volume Profiles often slow down a chart. Our Optimized VPC provides the "Magnet" price without the lag. Indecision: By requiring a Market Structure Shift (MSS) alongside a Fair Value Gap (FVG), it removes the guesswork of "Is this a reversal or a continuation?" Why It Is Unique: Unlike standard indicators that look at a single data point (like just price or just volume), this is a Holistic System. Auto-Mitigation: Most FVG indicators clutter your screen with old boxes. This tool automatically deletes zones once price "fills" them, keeping your focus on live opportunities. Institutional "Sweep" Logic: It specifically tracks if price has "stolen" the liquidity from a previous session before issuing a signal. The "Vegas" Filter: It uses the 144 EMA (Vegas Floor) as a high-probability institutional trend filter, ensuring you aren't fighting the primary trend. When testing this, track one specific stat: "Did price hit the VPC after the MSS?" You will likely find that even when the trade doesn't reach the far PRZ targets, it reaches the VPC Magnet over 70% of the time. Focusing on that "snap-back" to the orange line is the secret to a high win rate with this tool.
Indicador Pine Script®
por Crypt0Curious
1
Multi-MA SuiteMulti-MA Suite - Customizable Moving Averages Indicator Overview Multi-MA Suite is a comprehensive moving average indicator that combines both Exponential Moving Averages (EMAs) and Simple Moving Averages (SMAs) in a single, highly customizable tool. Designed for traders who rely on multiple timeframe analysis, this indicator provides up to 9 moving averages (5 EMAs + 4 SMAs) with full control over visibility, color schemes, and parameters. Key Features ✓ Dual MA Types: 5 Exponential Moving Averages (EMAs) - Responsive to recent price action, ideal for short to medium timeframes 4 Simple Moving Averages (SMAs) - Slow and stable, specifically designed for long timeframe analysis ✓ Full Customization: Individual toggle switches to show/hide each moving average Custom color picker for each MA line Adjustable length and source for all moving averages Progressive line width (thicker lines for longer periods) ✓ Pre-configured Defaults: EMA: 9, 21, 50, 100, 200 (common swing trading periods) SMA: 50, 100, 200, 300 (institutional reference levels for long-term trends) Color-coded scheme: Warm colors (yellow-orange) for EMAs, Cool colors (blue-purple) for SMAs ✓ Clean Interface: Organized input groups for easy navigation Clear labeling and logical parameter ordering Minimal chart clutter with toggle controls Key Difference - Speed & Timeframe: EMAs: Fast and reactive → Best for short to medium timeframes (1-min to 4-hour charts) SMAs: Slow and smooth → Best for long timeframes (daily, weekly, monthly charts) Recommended Settings Day Trading (Short Timeframes): Focus on EMAs: 9, 21, 50 Use 1-minute to 15-minute charts SMAs react too slowly for intraday timeframes Swing Trading (Medium Timeframes): Use all EMAs with SMA 50 and 200 1-hour to daily charts work best Mix of EMAs for entries, SMAs for trend context Position Trading (Long Timeframes): Focus primarily on SMAs: 50, 100, 200, 300 Daily to weekly charts recommended SMAs excel here due to their slow, stable nature Can add EMA 200 for comparison Investment Analysis (Very Long Timeframes): SMAs only: 100, 200, 300 Weekly to monthly charts SMA's slow calculation filters noise perfectly for long-term trends EMA Timeframe-Specific Recommendations 📌 Important Notes on EMA Usage by Timeframe: Small Timeframes (5-minute and 15-minute charts): Use 9 EMA and 21 EMA These fast EMAs respond quickly to price changes Perfect for scalping and day trading The 9/21 EMA crossover is a popular day trading strategy Medium Timeframes (1-hour to 4-hour charts): Use 21 EMA and 50 EMA Balances responsiveness with trend reliability Ideal for swing trading and intraday position holding The 21/50 EMA combination filters out noise while staying responsive Long Timeframes (Daily and Weekly charts): Use 50 EMA and 200 EMA The classic trend-following combination 50 EMA for medium-term trend, 200 EMA for major trend The 50/200 EMA crossover is known as the "Golden Cross" (bullish) or "Death Cross" (bearish) For very long-term analysis on these timeframes, consider using SMAs instead Quick Reference Guide: 5m / 15m: EMA 9 & 21 1h / 4h: EMA 21 & 50 1D / 1W: EMA 50 & 200 (or switch to SMAs for even smoother signals) Practical Trading Strategy with EMAs 📌 Why Use EMAs for Active Trading: For active trading, use EMAs because they have faster movement compared to SMAs. This faster response to price changes allows you to catch trends earlier and exit trades before major reversals occur. Three-EMA Trading System: 1. 9 EMA - Quick Trend Recognition: Use the 9 EMA to understand the trend quickly When price is above 9 EMA = Short-term uptrend When price is below 9 EMA = Short-term downtrend The 9 EMA reacts immediately to price momentum changes Perfect for entry timing and quick trend identification 2. 21 EMA - Exit Signal and Trend Confirmation: When the 21 EMA breaks (price crosses it), exit your trade This is critical because when the 21 EMA breaks, the trend will likely reverse The 21 EMA acts as your "stop-loss line" Breaking the 21 EMA signals that the short-term momentum has shifted Example: In an uptrend, when price crosses below 21 EMA, exit longs immediately Example: In a downtrend, when price crosses above 21 EMA, exit shorts immediately 3. 50 EMA - Full Correction Understanding: Use the 50 EMA to understand the complete correction The 50 EMA shows where the full pullback or correction might end When price reaches the 50 EMA, it often bounces (in a strong trend) Breaking the 50 EMA indicates a deeper correction or potential trend reversal Use it to gauge the strength of the overall trend Customization Tips Toggle unnecessary MAs off to reduce chart clutter based on your trading style and timeframe For the 3-EMA trading strategy, enable only 9, 21, and 50 EMAs For long timeframes (daily+), disable EMAs and use only SMAs to avoid over-reactive signals Match your EMA selection to your timeframe using the guide above Adjust colors to match your chart theme or to highlight specific MAs Modify lengths to fit specific market conditions or asset volatility Change source from close to high/low/HL2 for alternative perspectives Use thicker lines for key decision MAs (edit linewidth in settings) Color Scheme Rationale EMAs (Warm Colors): Yellow → Orange progression represents increasing timeframes while maintaining visual cohesion. The warm palette signals "active" or "fast-reacting" nature of EMAs, perfect for shorter timeframes and active trading. SMAs (Cool Colors): Blue → Purple progression provides clear visual distinction from EMAs. The cool palette suggests "stable," "slow," and "smooth" characteristics of SMAs, ideal for long timeframe analysis. What Makes This Different? Unlike basic MA indicators, Multi-MA Suite provides: Both EMA and SMA in one indicator (saves indicator slots) Optimized MA selection based on speed characteristics - fast EMAs for short timeframes, slow SMAs for long timeframes Clear timeframe-specific EMA recommendations for immediate use Practical trading strategy included - 9 EMA for trend, 21 EMA for exit, 50 EMA for corrections Individual control over each MA (toggle, color, parameters) Thoughtful default settings based on widely-used trading periods Color-coded system for instant visual differentiation Clean, organized interface for efficient workflow Installation & Usage Add the indicator to your chart Open indicator settings to customize For active trading: Enable 9, 21, and 50 EMAs (the recommended trading system) Select appropriate MAs for your timeframe (use the EMA timeframe guide above) Toggle MAs on/off based on your analysis needs Adjust colors if desired to match your chart theme Modify lengths and sources as needed for your strategy ⚠️ IMPORTANT DISCLAIMER EDUCATIONAL AND INFORMATIONAL PURPOSES ONLY This indicator and its accompanying documentation are provided for educational and informational purposes only. The content does not constitute financial advice, investment advice, trading advice, or any other sort of advice, and you should not treat any of the indicator's content as such. NO GUARANTEE OF RESULTS Past performance is not indicative of future results. The strategies, techniques, and concepts discussed herein are provided "as is" without any warranty of any kind. Trading and investing in financial markets involves substantial risk of loss and is not suitable for every investor. RISK ACKNOWLEDGMENT You can lose money trading: Trading stocks, forex, futures, options, cryptocurrencies, and other financial instruments carries a high level of risk and may not be suitable for all investors. You may sustain a total loss of your investment. No guaranteed profits: The use of moving averages or any technical indicator does not guarantee profitable trades. Markets can remain irrational longer than you can remain solvent. Lagging indicators: All moving averages are lagging indicators based on historical price data and may not predict future price movements. False signals: Moving averages can produce false signals, especially in choppy, sideways, or low-volume market conditions. YOUR RESPONSIBILITY Do your own research: Before making any trading or investment decision, you should conduct your own research and due diligence. Consult professionals: Consider seeking advice from qualified financial advisors, certified public accountants, or licensed professionals before making financial decisions. Risk management: Always use proper risk management, including stop-losses, position sizing, and diversification. Demo trading: Test any strategy on a demo account before risking real capital. Understand the markets: Ensure you fully understand the markets you're trading and the risks involved. PERSONAL TRADING DECISIONS All trading decisions are made at your own discretion and at your own risk. You are solely responsible for all trading decisions you make. The strategies mentioned (including the 9/21/50 EMA system) are examples only and should not be followed blindly without proper testing and risk assessment. MARKET CONDITIONS VARY Market conditions change constantly. What works in one market condition may not work in another. Trending strategies (like the ones discussed) typically perform poorly in ranging markets. Adapt your approach based on current market conditions. USE AT YOUR OWN RISK By using this indicator, you acknowledge that you have read this disclaimer and agree to be bound by its terms. If you do not agree with any part of this disclaimer, do not use this indicator.
Indicador Pine Script®
por aaboomar
MA Distance MonitorMA Distance Monitor - Custom Overview The MA Distance Monitor is a professional-grade dashboard designed for traders who need to track the relationship between price and multiple Moving Averages simultaneously. Unlike standard indicators that simply plot lines, this tool quantifies exactly how far the price is from your key levels (in Percentage or Price terms). This is crucial for identifying Mean Reversion opportunities (when price is overextended) and confirming Trend Strength. Key Features 1. 5 Fully Configurable Moving Averages Monitor 5 distinct MAs at once. Default Setup: 5, 10, 20, 50, and 200 SMA (Simple Moving Average) — widely used institutional levels. Customization: Switch any individual MA between SMA and EMA (Exponential Moving Average) and change lengths to fit your strategy. 2. Smart Dashboard (Clean Mode by Default) The on-screen table gives you real-time data without cluttering your chart. Clean Mode: By default, it shows only the Distance %, giving you a minimalist view of market extension. Expandable: In the settings, you can enable additional columns to see the MA Name, MA Price, and Warning Thresholds. Borders: Toggle table grid lines on or off for a seamless look. 3. "Overextended" Warning System Set a specific "Warn %" threshold for each MA (e.g., 5%). If the price deviates beyond this threshold, the indicator highlights the data in Orange (or your custom color). Use Case: This helps identify when price has moved too far, too fast, signaling a potential pullback or reversal. 4. Chart Scale Labels Floating labels appear on the right-side price scale, marking the exact price level of your MAs. These labels dynamically show the current distance %, keeping your eyes on the price action. 5. Advanced Theming Dark Mode: High-contrast colors optimized for dark charts. Light Mode: Optimized for bright backgrounds. Custom: Fully control every color (Bullish, Bearish, Warning, Text, Headers, Borders) to match your chart aesthetic perfectly. How to Use Interpreting the Data Green: Price is Above the Moving Average (Bullish Trend). Red: Price is Below the Moving Average (Bearish Trend). Orange (Warning): Price is Overextended (Distance > Threshold). Watch for mean reversion. Settings Guide MA Configuration: Set your Lengths and Types (SMA/EMA). Display & Styling: * Toggle Show Dashboard Table to hide/view the table. Toggle Show Table Header or Show Table Borders for layout preference. Enable Show MA Name or Show MA Price for more detailed data. Colors: Select "Custom" in the Theme dropdown to apply your own color palette. Alerts This script includes built-in alertcondition events for automation: Crossover: Triggered when Price crosses OVER a specific MA. Crossunder: Triggered when Price crosses UNDER a specific MA. To set an alert: Click the "Alert" button in TradingView. Select "MA Dist Custom" as the condition. Choose the specific crossing event (e.g., "Cross Over MA 5"). Created by Psycholfye
Indicador Pine Script®
por ocmodak
Regime Switch 100/200 SMAWhat it does Daily, close-only trend regime for any symbol using the 100-day (momentum) and 200-day (regime) SMAs. Classifies the tape into GREEN / YELLOW / RED and stays stable intraday. How it works (rules) GREEN = Close > 100D and 100D > 200D -> full risk-on. YELLOW = Close > 200D and 100D <= 200D -> light risk-on / repair. RED = Close < 200D -> risk-off. State changes require N = 2 daily closes (configurable). Optional +/- band % around 200D to reduce whipsaws. Always computes on daily data (independent of chart timeframe). Inputs Use chart symbol? (else pick a fixed symbol) Fast SMA length (default 100) Slow SMA length (default 200) Daily closes to confirm (default 2) Buffer band % around 200D (default 0) Toggles: state-change markers, status panel, SMA labels Visuals & alerts Background: GREEN / YELLOW / RED by state Lines: SMA100 (yellow) and SMA200 (orange) Markers on state flips; three alertconditions fire on GREEN / YELLOW / RED changes How to use (workflow) View with 1D candles , ~ 1Y range . Decide at the daily close; execute next day’s open. Example sizing when signaling on QQQ and expressing with TQQQ: - GREEN -> sleeve 10–15% (cap 20–25%); trim if sleeve > target x 1.25. - YELLOW -> sleeve 5–8% (half risk). - RED -> 0%; sit in cash until GREEN or YELLOW returns. No margin/loans layered on leveraged ETFs. Notes Works with regular candles; dividend-adjustment settings can nudge SMA values. For faster but noisier behavior, shorten to 150/100D or set Confirm=1. Change log v1.0: Initial release (daily, 3-state, follows chart symbol, alerts, panel). Disclosure Educational use only. Not investment advice.
Indicador Pine Script®
por degenfolio
Elite MTF EMA Reclaim StrategyThis script is a 6-minute execution MTF EMA “retest → reclaim” strategy. It looks for trend-aligned pullbacks into fast EMAs, then enters when price reclaims and (optionally) retests the reclaim level—while filtering out chop (low trend strength/volatility or recent EMA20/50 crosses) and enforcing higher-timeframe alignment (Daily + 1H, or whichever you select). How to use Run it on a 6-minute chart (that’s what the presets are tuned for). Pick your Market (Forex / XAUUSD / Crypto / Indices) and a Preset: Elite = strictest, cleanest (fewer signals) Balanced = middle ground Aggressive = most signals, loosest filters Set HTF Alignment Mode: D + H1 (recommended) for highest quality Off if you want more trades / LTF-only testing Leave Kill Chop = ON (recommended). If you’re not getting trades, this is usually the blocker. Choose entry behavior: If Require Retest = true, entries happen on the retest after reclaim (cleaner, later). If Require Retest = false, entries trigger on reclaim using Reclaim Timing Default: “Preset” uses the strategy’s recommended default per market/preset or force Reclaim close / Next bar confirmation For backtesting, keep Mode = Strategy (Backtest). For alerts/visual-only, set Mode = Indicator (Signals Only). Use Show Signals (All Modes) to toggle triangles on/off without affecting trades. Tip: If TradingView says “not enough data,” switch symbol history to “All,” reduce HTF alignment (try H1 only), or backtest a more recent date range.
Estratégia Pine Script®
por sledgeproduuctions
Mag 7 EMA Trend MonitorDashboard Layout: 1. Symbol Column: The Mag 7 tickers. 2. Trend Column: Visual Bull/Bear status. 3. Strength Column: Percentage distance from the mean (EMA 21). 4. Aggregate Row: Summary of market breadth and average sector pull/push. How to Interpret the Trend Strength: • Positive %: The stock is trading above its 21 EMA. A very high number (e.g., $+15\%$) might suggest the stock is "overbought" or overextended. • Negative %: The stock is trading below its 21 EMA. A very low number (e.g., $-10\%$) might suggest it is "oversold." • Avg Strength: This gives you a bird's-eye view of the sector. If the aggregate is "5 Up / 2 Down" but the Avg Strength is only $+0.5\%$, the trend is weak and might be exhausting. "Pro-tips" for tool: • Multi-Timeframe Correlation: Try setting the Dashboard Timeframe to "D" (Daily) while trading on a "5m" or "15m" chart. This allows you to see if your intraday trade is aligned with the "Big Money" trend of the week. • The 4/7 Rule: Watch for that Aggregate row to hit 4 out of 7. In the Mag 7, since these stocks carry so much weight in the SPY and QQQ, a shift to a majority (4+) often precedes a move in the overall market indices.
Indicador Pine Script®
por j2m2t2
CryptoFlux Dynamo [JOAT]CryptoFlux Dynamo: Velocity Scalping Strategy WHAT THIS STRATEGY IS CryptoFlux Dynamo is an open-source Pine Script v6 strategy designed for momentum-based scalping on cryptocurrency perpetual futures. It combines multiple technical analysis methods into a unified system that adapts its behavior based on current market volatility conditions. This script is published open-source so you can read, understand, and modify the complete logic. The description below explains everything the strategy does so that traders who cannot read Pine Script can fully understand how it works before using it. HOW THIS STRATEGY IS ORIGINAL AND WHY THE INDICATORS ARE COMBINED This strategy uses well-known indicators (MACD, EMA, RSI, MFI, Bollinger Bands, Keltner Channels, ATR). The originality is not in the individual indicators themselves, but in the specific way they are integrated into a regime-adaptive system. Here is the detailed justification for why these components are combined and how they work together: The Problem Being Solved: Standard indicator-based strategies use fixed thresholds. For example, a typical MACD strategy might enter when the histogram crosses above zero. However, in cryptocurrency markets, volatility changes dramatically throughout the day and week. A MACD crossover during a low-volatility consolidation period has very different implications than the same crossover during a high-volatility trending period. Using the same entry thresholds and stop distances in both conditions leads to either: Too many false signals during consolidation (if thresholds are loose) Missing valid opportunities during expansion (if thresholds are tight) Stops that are too tight during volatility spikes (causing premature exits) Stops that are too wide during compression (giving back profits) The Solution Approach: This strategy first classifies the current volatility regime using normalized ATR (ATR as a percentage of price), then dynamically adjusts ALL other parameters based on that classification. This creates a context-aware system rather than a static threshold comparison. How Each Component Contributes to the System: ATR-Based Regime Classification (The Foundation) The strategy calculates ATR over 21 periods, smooths it with a 13-period EMA to reduce noise from wicks, then divides by price to get a normalized percentage. This ATR% is classified into three regimes: - Compression (ATR% < 0.8%): Market is consolidating, breakouts are more likely but false signals are common - Expansion (ATR% 0.8% - 1.6%): Normal trending conditions - Velocity (ATR% > 1.6%): High volatility, larger moves but also larger adverse excursions This regime classification then controls stop distances, profit targets, trailing stop offsets, and signal strength requirements. The regime acts as a "meta-parameter" that tunes the entire system. EMA Ribbon (8/21/34) - Trend Structure Detection The three EMAs establish trend direction and structure. When EMA 8 > EMA 21 > EMA 34, the trend structure is bullish. The slope of the middle EMA (21) is calculated over 8 bars and converted to degrees using arctangent. This slope measurement quantifies trend strength, not just direction. Why these specific periods? The 8/21/34 sequence follows Fibonacci-like spacing and provides good separation on 5-minute cryptocurrency charts. The fast EMA (8) responds to immediate price action, the mid EMA (21) represents the short-term trend, and the slow EMA (34) acts as a trend filter. The EMA ribbon works with the regime classification: during compression regimes, the strategy requires stronger ribbon alignment before entry because false breakouts are more common. MACD (8/21/5) - Momentum Measurement The MACD uses faster parameters (8/21/5) than the standard (12/26/9) because cryptocurrency markets move faster than traditional markets. The histogram is smoothed with a 5-period EMA to reduce noise. The key innovation is the adaptive histogram baseline. Instead of using a fixed threshold, the strategy calculates a rolling baseline from the smoothed absolute histogram value, then multiplies by a sensitivity factor (1.15). This means the threshold for "significant momentum" automatically adjusts based on recent momentum levels. The MACD works with the regime classification: during velocity regimes, the histogram baseline is effectively higher because recent momentum has been stronger, preventing entries on relatively weak momentum. RSI (21 period) and MFI (21 period) - Independent Momentum Confirmation RSI measures momentum using price changes only. MFI (Money Flow Index) measures momentum using price AND volume. By requiring both to confirm, the strategy filters out price moves that lack volume support. The 21-period length is longer than typical (14) to reduce noise on 5-minute charts. The trigger threshold (55 for longs, 45 for shorts) is slightly offset from 50 to require momentum in the trade direction, not just neutral readings. These indicators work together: a signal requires RSI > 55 AND MFI > 55 for longs. This dual confirmation reduces false signals from price manipulation or low-volume moves. Bollinger Bands (1.5 mult) and Keltner Channels (1.8 mult) - Squeeze Detection When Bollinger Bands contract inside Keltner Channels, volatility is compressing and a breakout is likely. This is the "squeeze" condition. When the bands expand back outside the channels, the squeeze "releases." The strategy uses a 1.5 multiplier for Bollinger Bands (tighter than standard 2.0) and 1.8 for Keltner Channels. These values were chosen to identify meaningful squeezes on 5-minute cryptocurrency charts without triggering too frequently. The squeeze detection works with the regime classification: squeeze releases during compression regimes receive additional signal strength points because breakouts from consolidation are more significant. Volume Impulse Detection - Institutional Participation Filter The strategy calculates a volume baseline (34-period SMA) and standard deviation. A "volume impulse" is detected when current volume exceeds the baseline by 1.15x OR when the volume z-score exceeds 0.5. This filter ensures entries occur when there is meaningful market participation, not during low-volume periods where price moves are less reliable. Volume impulse is required for all entries and adds points to the composite signal strength score. Cycle Oscillator - Trend Alignment Filter The strategy calculates a 55-period EMA as a cycle basis, then measures price deviation from this basis as a percentage. When price is more than 0.15% above the cycle basis, the cycle is bullish. When more than 0.15% below, the cycle is bearish. This filter prevents counter-trend entries. Long signals require bullish cycle alignment; short signals require bearish cycle alignment. BTC Dominance Filter (Optional) - Market Regime Filter The strategy can optionally use BTC.D (Bitcoin Dominance) as a market regime filter. When BTC dominance is rising (slope > 0.12), the market is in "risk-off" mode and long entries on altcoins are filtered. When dominance is falling (slope < -0.12), short entries are filtered. This filter is optional because the BTC.D data feed may lag during low-liquidity periods. How The Components Work Together (The Mashup Justification): The strategy uses a composite scoring system where each signal pathway contributes points: Trend Break pathway (30 points): Requires EMA ribbon alignment + positive slope + price breaks above recent structure high Momentum Surge pathway (30 points): Requires MACD histogram > adaptive baseline + MACD line > signal + RSI > 55 + MFI > 55 + volume impulse Squeeze Release pathway (25 points): Requires BB inside KC (squeeze) then release + momentum bias + histogram confirmation Micro Pullback pathway (15 points): Requires shallow retracement to fast EMA within established trend + histogram confirmation + volume impulse Additional modifiers: +5 points if volume impulse is present, -5 if absent +5 points in velocity regime, -2 in compression regime +5 points if cycle is aligned, -5 if counter-trend A trade only executes when the composite score reaches the minimum threshold (default 55) AND all filters agree (session, cycle bias, BTC dominance if enabled). This scoring system is the core innovation: instead of requiring ALL conditions to be true (which would generate very few signals) or ANY condition to be true (which would generate too many false signals), the strategy requires ENOUGH conditions to be true, with different conditions contributing different weights based on their reliability. HOW THE STRATEGY CALCULATES ENTRIES AND EXITS Entry Logic: 1. Calculate current volatility regime from ATR% 2. Calculate all indicator values (MACD, EMA, RSI, MFI, squeeze, volume) 3. Evaluate each signal pathway and sum points 4. Check all filters (session, cycle, dominance, kill switch) 5. If composite score >= 55 AND all filters pass, generate entry signal 6. Calculate position size based on risk per trade and regime-adjusted stop distance 7. Execute entry with regime name as comment Position Sizing Formula: RiskCapital = Equity * (0.65 / 100) StopDistance = ATR * StopMultiplier(regime) RawQuantity = RiskCapital / StopDistance MaxQuantity = Equity * (12 / 100) / Price Quantity = min(RawQuantity, MaxQuantity) Quantity = round(Quantity / 0.001) * 0.001 This ensures each trade risks approximately 0.65% of equity regardless of volatility, while capping total exposure at 12% of equity. Stop Loss Calculation: Stop distance is ATR multiplied by a regime-specific multiplier: Compression regime: 1.05x ATR (tighter stops because moves are smaller) Expansion regime: 1.55x ATR (standard stops) Velocity regime: 2.1x ATR (wider stops to avoid premature exits during volatility) Take Profit Calculation: Target distance is ATR multiplied by regime-specific multiplier and base risk/reward: Compression regime: 1.6x ATR * 1.8 base R:R * 0.9 regime bonus = approximately 2.6x ATR Expansion regime: 2.05x ATR * 1.8 base R:R * 1.0 regime bonus = approximately 3.7x ATR Velocity regime: 2.8x ATR * 1.8 base R:R * 1.15 regime bonus = approximately 5.8x ATR Trailing Stop Logic: When adaptive trailing is enabled, the strategy calculates a trailing offset based on ATR and regime: Compression regime: 1.1x base offset (looser trailing to avoid noise) Expansion regime: 1.0x base offset (standard) Velocity regime: 0.8x base offset (tighter trailing to lock in profits during fast moves) The trailing stop only activates when it would be tighter than the initial stop. Momentum Fail-Safe Exits: The strategy closes positions early if momentum reverses: Long positions close if MACD histogram turns negative OR EMA ribbon structure breaks (fast EMA crosses below mid EMA) Short positions close if MACD histogram turns positive OR EMA ribbon structure breaks This prevents holding through momentum reversals even if stop loss hasn't been hit. Kill Switch: If maximum drawdown exceeds 6.5%, the strategy disables new entries until manually reset. This prevents continued trading during adverse conditions. HOW TO USE THIS STRATEGY Step 1: Apply to Chart Use a 5-minute chart of a high-liquidity cryptocurrency perpetual (BTC/USDT, ETH/USDT recommended) Ensure at least 200 bars of history are loaded for indicator stabilization Use standard candlestick charts only (not Heikin Ashi, Renko, or other non-standard types) Step 2: Understand the Visual Elements EMA Ribbon: Three lines (8/21/34 periods) showing trend structure. Bullish when stacked upward, bearish when stacked downward. Background Color: Shows current volatility regime - Indigo/dark blue = Compression (low volatility) - Purple = Expansion (normal volatility) - Magenta/pink = Velocity (high volatility) Bar Colors: Reflect signal strength divergence. Brighter colors indicate stronger directional bias. Triangle Markers: Entry signals. Up triangles below bars = long entry. Down triangles above bars = short entry. Dashboard (top-right): Real-time display of regime, ATR%, signal strengths, position status, stops, targets, and risk metrics. Step 3: Interpret the Dashboard Regime: Current volatility classification (Compression/Expansion/Velocity) ATR%: Normalized volatility as percentage of price Long/Short Strength: Current composite signal scores (0-100) Cycle Osc: Price deviation from 55-period EMA as percentage Dominance: BTC.D slope and filter status Position: Current position direction or "Flat" Stop/Target: Current stop loss and take profit levels Kill Switch: Status of drawdown protection Volume Z: Current volume z-score Impulse: Whether volume impulse condition is met Step 4: Adjust Parameters for Your Needs For more conservative trading: Increase "Minimum Composite Signal Strength" to 65 or higher For more aggressive trading: Decrease to 50 (but expect more false signals) For higher timeframes (15m+): Increase "Structure Break Window" to 12-15, increase "RSI Momentum Trigger" to 58 For lower liquidity pairs: Increase "Volume Impulse Multiplier" to 1.3, increase slippage in strategy properties To disable short selling: Uncheck "Enable Short Structure" To disable BTC dominance filter: Uncheck "BTC Dominance Confirmation" STRATEGY PROPERTIES (BACKTEST SETTINGS) These are the exact settings used in the strategy's Properties dialog box. You must use these same settings when evaluating the backtest results shown in the publication: Initial Capital: $100,000 Justification: This amount is higher than typical retail accounts. I chose this value to demonstrate percentage-based returns that scale proportionally. The strategy uses percentage-based position sizing (0.65% risk per trade), so a $10,000 account would see the same percentage returns with 10x smaller position sizes. The absolute dollar amounts in the backtest should be interpreted as percentages of capital. Commission: 0.04% (commission_value = 0.04) Justification: This reflects typical perpetual futures exchange fees. Major exchanges charge between 0.02% (maker) and 0.075% (taker). The 0.04% value is a reasonable middle estimate. If your exchange charges different fees, adjust this value accordingly. Higher fees will reduce net profitability. Slippage: 1 tick Justification: This is conservative for liquid pairs like BTC/USDT on major exchanges during normal conditions. For less liquid altcoins or during high volatility, actual slippage may be higher. If you trade less liquid pairs, increase this value to 2-3 ticks for more realistic results. Pyramiding: 1 Justification: No position stacking. The strategy holds only one position at a time. This simplifies risk management and prevents overexposure. calc_on_every_tick: true Justification: The strategy evaluates on every price update, not just bar close. This is necessary for scalping timeframes where waiting for bar close would miss opportunities. Note that this setting means backtest results may differ slightly from bar-close-only evaluation. calc_on_order_fills: true Justification: The strategy recalculates immediately after order fills for faster response to position changes. RISK PER TRADE JUSTIFICATION The default risk per trade is 0.65% of equity. This is well within the TradingView guideline that "risking more than 5-10% on a trade is not typically considered viable." With the 12% maximum exposure cap, even if the strategy takes multiple consecutive losses, the total risk remains manageable. The kill switch at 6.5% drawdown provides additional protection by halting new entries during adverse conditions. The position sizing formula ensures that stop distance (which varies by regime) is accounted for, so actual risk per trade remains approximately 0.65% regardless of volatility conditions. SAMPLE SIZE CONSIDERATIONS For statistically meaningful backtest results, you should select a dataset that generates at least 100 trades. On 5-minute BTC/USDT charts, this typically requires: 2-3 months of data during normal market conditions 1-2 months during high-volatility periods 3-4 months during low-volatility consolidation periods The strategy's selectivity (requiring 55+ composite score plus all filters) means it generates fewer signals than less filtered approaches. If your backtest shows fewer than 100 trades, extend the date range or reduce the minimum signal strength threshold. Fewer than 100 trades produces statistically unreliable results. Win rate, profit factor, and other metrics can vary significantly with small sample sizes. STRATEGY DESIGN COMPROMISES AND LIMITATIONS Every strategy involves trade-offs. Here are the compromises made in this design and the limitations you should understand: Selectivity vs. Opportunity Trade-off The 55-point minimum threshold filters many potential trades. This reduces false signals but also misses valid setups that don't meet all criteria. Lowering the threshold increases trade frequency but decreases win rate. There is no "correct" threshold; it depends on your preference for fewer higher-quality signals vs. more signals with lower individual quality. Regime Classification Lag The ATR-based regime detection uses historical data (21 periods + 13-period smoothing). It cannot predict sudden volatility spikes. During flash crashes or black swan events, the strategy may be classified in the wrong regime for several bars before the classification updates. This is an inherent limitation of any lagging indicator. Indicator Parameter Sensitivity The default parameters (MACD 8/21/5, EMA 8/21/34, RSI 21, etc.) are tuned for BTC/ETH perpetuals on 5-minute charts during 2024 market conditions. Different assets, timeframes, or market regimes may require different parameters. There is no guarantee that parameters optimized on historical data will perform similarly in the future. BTC Dominance Filter Limitations The CRYPTOCAP:BTC.D data feed may lag during low-liquidity periods or weekends. The dominance slope calculation uses a 5-bar SMA, adding additional delay. If you notice the filter behaving unexpectedly, consider disabling it. Backtest vs. Live Execution Differences TradingView backtesting does not replicate actual broker execution. Key differences: Backtests assume perfect fills at calculated prices; real execution involves order book depth, latency, and partial fills The calc_on_every_tick setting improves backtest realism but still cannot capture sub-bar price action or order book dynamics Commission and slippage settings are estimates; actual costs vary by exchange, time of day, and market conditions Funding rates on perpetual futures are not modeled in backtests and can significantly impact profitability over time Exchange-specific limitations (position limits, liquidation mechanics, order types) are not modeled Market Condition Dependencies This strategy is designed for trending and breakout conditions. During extended sideways consolidation with no clear direction, the strategy may generate few signals or experience whipsaws. No strategy performs well in all market conditions. Cryptocurrency-Specific Risks Cryptocurrency markets operate 24/7 without session boundaries. This means: No natural "overnight" risk reduction Volatility can spike at any time Liquidity varies significantly by time of day Exchange outages or issues can occur at any time WHAT THIS STRATEGY DOES NOT DO To be straightforward about limitations: This strategy does not guarantee profits. Past backtest performance does not indicate future results. This strategy does not predict the future. It reacts to current conditions based on historical patterns. This strategy does not account for funding rates, which can significantly impact perpetual futures profitability. This strategy does not model exchange-specific execution issues (partial fills, requotes, outages). This strategy does not adapt to fundamental news events or black swan scenarios. This strategy is not optimized for all market conditions. It may underperform during extended consolidation. IMPORTANT RISK WARNINGS Past performance does not guarantee future results. The backtest results shown reflect specific historical market conditions and parameter settings. Markets change constantly, and strategies that performed well historically may underperform or lose money in the future. A single backtest run does not constitute proof of future profitability. Trading involves substantial risk of loss. Cryptocurrency derivatives are highly volatile instruments. You can lose your entire investment. Only trade with capital you can afford to lose completely. This is not financial advice. This strategy is provided for educational and informational purposes only. It does not constitute investment advice, trading recommendations, or any form of financial guidance. The author is not a licensed financial advisor. You are responsible for your own decisions. Before using this strategy with real capital: Thoroughly understand the code and logic by reading the open-source implementation Forward test with paper trading or very small positions for an extended period Verify that commission, slippage, and execution assumptions match your actual trading environment Understand that live results will differ from backtest results Consider consulting with a qualified financial advisor No guarantees or warranties. This strategy is provided "as is" without any guarantees of profitability, accuracy, or suitability for any purpose. The author is not responsible for any losses incurred from using this strategy. OPEN-SOURCE CODE STRUCTURE The strategy code is organized into these sections for readability: Configuration Architecture: Input parameters organized into logical groups (Core Controls, Optimization Constants, Regime Intelligence, Signal Pathways, Risk Architecture, Visualization) Helper Functions: calcQty() for position sizing, clamp01() and normalize() for value normalization, calcMFI() for Money Flow Index calculation Core Indicator Engine: EMA ribbon, ATR and regime classification, MACD with adaptive baseline, RSI, MFI, volume analytics, cycle oscillator, BTC dominance filter, squeeze detection Signal Pathway Logic: Trend break, momentum surge, squeeze release, micro pullback pathways with composite scoring Entry/Exit Orchestration: Signal filtering, position sizing, entry execution, stop/target calculation, trailing stop logic, momentum fail-safe exits Visualization Layer: EMA plots, regime background, bar coloring, signal labels, dashboard table You can read and modify any part of the code. Understanding the logic before deployment is strongly recommended. - Made with passion by officialjackofalltrades
Estratégia Pine Script®
por officialjackofalltrades
GMACD MTF EMA14 Strategy (1H TF)GMACD MTF EMA14 Strategy (1H TF) - FINAL SAFE Overview The GMACD MTF EMA14 Strategy is a multi-timeframe momentum trading strategy designed for the 1-hour timeframe. It combines a custom GMACD (Geometric MACD) with multi-timeframe EMA14 alignment to generate high-probability long and short trade signals. The strategy includes state-controlled entries and unique alerts to ensure trades are executed only once per confirmed setup. Key Components GMACD Core Uses a custom geometric MACD formula with fast (12), slow (26), and smooth (14) lengths. Signal line is an EMA of the GMACD with a length of 9. GMACD normalizes price movement against the daily range (high-low), making it more sensitive to momentum changes. Multi-Timeframe EMA14 Filter (MTF) EMA14 is calculated on 15m, 30m, and 1H timeframes. Bullish alignment: price closes above at least 2 of the 3 EMAs. Bearish alignment: price closes below at least 2 of the 3 EMAs. Acts as a trend filter, ensuring trades align with broader momentum. Signal Conditions Long Entry: GMACD > Signal AND EMA14 bullish alignment. Short Entry: GMACD < Signal AND EMA14 bearish alignment. Signals are triggered only when both momentum and trend conditions are met. State-Controlled Alerts & Entries Ensures unique entries per trade condition. Alerts notify traders of confirmed setups with detailed reasoning: "GMACD LONG | MACD > Signal | EMA14 aligned (15m,30m,1H)" "GMACD SHORT | MACD < Signal | EMA14 aligned (15m,30m,1H)" Avoids repeated alerts during ongoing trades. Momentum + Trend Confluence: Combines momentum (GMACD) with trend alignment (MTF EMA14) to improve trade quality. Multi-Timeframe Confirmation: Reduces false signals by requiring at least 2 timeframes to confirm trend direction. Automated Alerts: Traders receive instant notifications when setups occur. Safe Execution: State-controlled logic prevents repeated entries and false signals. Customizable: All key parameters (GMACD lengths, EMA length, timeframes) can be adjusted for optimization. Visual Reference: GMACD and Signal plotted on the chart for quick visual confirmation. How Traders Can Use This Strategy Intraday or Swing Trading (1H TF) Ideal for 1-hour charts, capturing medium-term momentum moves. Signal Confirmation Use the dashboard plot (GMACD vs Signal) and EMA alignment to confirm trade direction. Alerts for Active Monitoring Traders can set alerts to receive notifications without constantly watching the charts. Risk Management Since the strategy ensures trades align with multi-timeframe trend, stop-loss placement and position sizing can be optimized based on volatility or account risk tolerance. Summary The GMACD MTF EMA14 Strategy is a robust and safe momentum trading tool for traders who want: Multi-timeframe confirmation Unique, actionable alerts Momentum-based trade entries with trend filter It’s especially suitable for traders looking for mechanical entries in trending markets, reducing emotional decisions while capturing high-probability trades.
Estratégia Pine Script®
por arupnj2018
MA 8-13-21-55-89-144-233MA 8-13-21-55-89-144-233 — Multi-Layer Trend & Momentum Framework This indicator is designed for traders who want to read market structure, trend direction, and momentum at a glance using a clean and professional multi-moving average setup. Why These Periods? The periods 8, 13, 21, 55, 89, 144, 233 are: Fibonacci-based Commonly used by professional and institutional traders Highly effective for separating momentum, pullbacks, and macro trend This structure allows you to track short-term speed, medium-term trend, and long-term market bias on a single chart. How to Use Trend Direction Price above MA 55 / 89 / 144 / 233 → bullish market structure Price below them → bearish market structure Momentum & Entries MA 8 – 13 – 21 Short-term momentum and aggressive entry zones MA 21 – 55 Healthy pullback and continuation areas within a trend Trend Strength Well-aligned and expanding MAs → strong trend Compressed MAs → ranging or indecisive market Who Is This For? Intraday traders Swing traders Price Action + MA traders Traders who prefer structure over clutter Important Note This indicator does not generate buy/sell signals by itself. Best results are achieved when combined with: Candlestick patterns Support & resistance Pure price action Clean chart. Clear structure. Multi-timeframe awareness. Know where the trend is, where momentum shifts, and when the market is compressing — all in one view.
Indicador Pine Script®
por nadoline
Triple EMA + Key Levels [Scalping-Algo]TITLE: Triple EMA Day Trading System with Multi-Timeframe Support/Resistance Levels DESCRIPTION: 📊 Overview This indicator combines trend-following EMAs with key historical price levels to create a complete day trading toolkit. It helps traders identify trend direction while highlighting important support and resistance zones from multiple timeframes. 🎯 Purpose & Trading Application Day traders often need to quickly assess: 1. Current trend direction (using EMAs) 2. Key price levels where reversals or breakouts may occur This indicator solves both needs in one tool, reducing chart clutter from multiple indicators. 📈 How It Works TREND IDENTIFICATION (EMAs): - EMA 13 (Yellow): Fast EMA for short-term momentum and entry timing - EMA 48 (Purple): Medium EMA for intraday trend direction - EMA 200 (Red): Slow EMA for overall trend bias Trading Logic: - When price is above all 3 EMAs = Strong bullish bias - When price is below all 3 EMAs = Strong bearish bias - EMA crossovers signal potential trend changes - The 13/48 crossover is particularly useful for intraday entries SUPPORT & RESISTANCE LEVELS: - Previous Day High/Low (Green, Solid): Most recent daily range - high probability reaction zones - 2-Day High/Low (Blue, Dashed): Extended lookback for stronger levels - Previous Week High/Low (Orange, Dotted): Major institutional levels Why These Levels Matter: Previous day and weekly highs/lows are watched by many traders and algorithms. Price often: - Reverses at these levels (support/resistance) - Accelerates through them (breakout trades) 🔧 How To Use FOR TREND TRADING: 1. Identify bias using EMA stack (all 3 aligned = strong trend) 2. Look for pullbacks to EMA 13 or 48 for entries 3. Use key levels as profit targets FOR REVERSAL TRADING: 1. Watch for price approaching previous day/week levels 2. Look for rejection candles at these levels 3. Use EMA 13 break as confirmation FOR BREAKOUT TRADING: 1. Identify consolidation near key levels 2. Enter on break of level with volume 3. Use opposite level as target ⚙️ Settings All parameters are fixed for simplicity: - EMAs: 13, 48, 200 periods - Levels: Previous Day, 2-Day, Previous Week - All lines thickness: 2 📝 Notes - Best used on intraday timeframes (1min to 1hour) - Levels update automatically each day/week - Labels on right side identify each level (PDH, PDL, 2DH, 2DL, PWH, PWL) --- TAGS: ema, daytrading, support, resistance, levels, intraday, trend, scalping, swingtrading
Indicador Pine Script®
por A1TradingHub
5x Multi-Timeframe Moving AveragesSince I use EMA lines a lot and I typically want them based on one timeframe - say: D1 - while looking into higher or lower timeframes, I made this simple indicator: - Up to 5 moving averages (SMA, EMA, ...) - on chart timeframe or any defined timeframe (W, D, H4, H1, 30min, ...) - each with user defined length / number of periods of calculation - each in user defined line style, width and color. Straight forward but very handy. Enjoy. Juergen
Indicador Pine Script®
por juergenbitz
Elite MTF EMA ReclaimThis indicator is a trend-continuation tool, not a scalper. Its purpose is to help you enter clean pullback trades in strong trends while blocking chop and low-quality setups. It works by: Requiring Daily + 1H trend alignment Enforcing EMA structure (5/10/20/50) on the execution timeframe Confirming momentum expansion using EMA slope + curvature Blocking trades when conditions are choppy (low ATR, weak ADX, tight EMAs, recent EMA crosses) Triggering entries only after a Pullback → Reclaim → (optional) Retest How to use it: Trade on the 6-minute chart (Forex works best based on default setting) but is adaptable to any market by changing settings Wait for LONG / SHORT triangles only when no CHOP or HTF block is shown Enter on the signal, place stops beyond EMA 50 or structure, target 2R–4R+ Expect fewer but higher-quality trades What it’s not: Not a breakout or range-trading indicator Not meant to fire many signals Not for choppy or low-volatility markets Bottom line: It helps you trade with higher-timeframe momentum, enter after pullbacks, and avoid bad market conditions.
Indicador Pine Script®
por sledgeproduuctions