Começar

LINE

LARGER PRICE LINE Adjustable (UPDATED)LARGER PRICE LINE I made this so I could SEE THE PRICE LINE BETTER and try to reduce some eye strain!! Hope it helps... enjoy! comment for improvements or suggestions Improved Adjustable Size and Color for the Price Line and Price Box Adjustment for Price Line: Size and Color plus Solid Line, Dashed or Dotted Line Adjustments include: Price Box Text Size and Color (Small, Normal, Large, Huge!) Adjustable Right Side Offset for Price Box
Indicador Pine Script®
por JoeKing1
QUARTERS THEORY XAUUSDThe “Quarter Theory XAUUSD” indicator on TradingView is designed to automatically plot horizontal price levels in $25 increments on your chart, providing traders with a clear visual representation of key psychological and technical price points. These levels are particularly useful for instruments like XAU/USD, where price often reacts to round numbers, forming support and resistance zones that can be leveraged for both scalping and swing trading strategies. By showing all $25 increments as horizontal white lines, the indicator ensures that traders can quickly identify potential entry and exit points, without the need for manual drawing or repeated calculations. The indicator works by calculating the nearest $25 multiple relative to the current market price and then drawing horizontal lines across the chart for all increments within a defined range. This range can be customized to suit the instrument being traded; for example, for gold (XAU/USD), a typical range might extend from 0 to 5000, covering all practical price levels that could be relevant in both high and low market conditions. By using Pine Script’s persistent variables, the indicator efficiently creates these lines only once at the start of the chart, avoiding unnecessary resource usage and preventing TradingView from slowing down, which can happen if lines are redrawn every bar. From a trading perspective, these levels serve multiple purposes. For scalpers, the $25 increments act as micro support and resistance points, helping to determine short-term price reactions and potential breakout zones. Scalpers can use these levels to enter positions with tight stop-loss orders just beyond a level and take profits near the next $25 increment, which aligns with common price behavior patterns in highly liquid instruments. For swing traders, the same levels provide broader context, allowing them to identify areas where price might pause or reverse over several days. Swing traders can use these levels to align trades with the prevailing trend, particularly when combined with other indicators such as moving averages or trendlines. Another key advantage of the Quarterly Levels indicator is its simplicity and visual clarity. By plotting lines in a uniform white color and extending them to the right, the chart remains clean and easy to read, allowing traders to focus on price action and market dynamics rather than cluttered technical drawings. This visual consistency also helps in backtesting and strategy development, as traders can quickly see how price interacts with each level over time. Additionally, the use of round-number increments leverages the psychological tendencies of market participants, as many traders place stop orders or entry points near these levels, making them natural zones of interest. Overall, the Quarterly Levels indicator combines efficiency, clarity, and practical trading utility into a single tool. It streamlines chart analysis, highlights meaningful price zones, and supports both scalping and swing trading approaches, making it an essential addition to a trader’s toolkit. By understanding how to integrate these levels into trading strategies, traders can make more informed decisions, manage risk effectively, and identify high-probability trade setups across various market conditions.
Indicador Pine Script®
por ElvinLing
Support Line [by rukich]🟠 OVERVIEW The indicator displays a floating line that acts as a support level. It's important to remember that any support level can be broken. 🟠 COMPONENTS The indicator is based on the percentage difference between the closes of the n-th bar back and the current bar. The resulting percentage is smoothed to remove noise. The indicator is displayed as a green-red line (the colors don’t carry meaning — they are used just for visual variety). When the price touches the support level, the bar background turns green. For convenience, there is a label on the right side of the indicator showing the current value of the line. 🟠 HOW TO USE The indicator includes several settings that can be adjusted, though optimal defaults are provided. Settings: Timeframe — specifies which timeframe’s data is used to calculate the line. Candles back — specifies how many bars back from the current one are used. The indicator should be used according to general support-zone logic. Since no support zone guarantees a price bounce, the optimal approach is to confirm the reaction after the price touches the line. Example of use: In the current example, the Timeframe in the indicator settings is set to 1 hour, and the currently open chart is 5 minutes. This means that on the 5-minute chart we see a 1-hour line. After the price touches the support line, you need to see a confirmation of the reaction to understand whether the support zone is holding the price. In the examples, reaction confirmation is shown through: the formation of an M5 shift and the invalidation of an FVG M5- (the latter is more risky than the M5 shift): 🟠 CONCLUSION The indicator shows a floating support zone, and when tested, you should confirm the reaction on a lower timeframe.
Indicador Pine Script®
por rukich
Exhaustion Zone [by rukich]🟠 OVERVIEW The indicator shows asset exhaustion — an area of interest where potential buying opportunities can be considered. 🟠 COMPONENTS The indicator is based on a combination of fundamental tools designed to properly react to price movement and volatility. It is displayed on the chart as a green line. When the price touches the indicator line, the candle lights up and is highlighted in green. 🟠 HOW TO USE The best timeframes for using the indicator: 1D and 3D. Since the indicator is used on higher timeframes, the price rarely reaches the indicator line, but it often shows a strong reaction when it does, which suggests that the indicator can be used for investment purposes. Since the zone suggests potential buying opportunities, it’s best to act from the zone only when a reaction is confirmed. Confirmation may include a candle close beyond nearby fractals or the invalidation of the nearest resistance zone. 🟠 CONCLUSION The indicator highlights an area of interest where, upon confirmation of a reaction, buying opportunities may be considered.
Indicador Pine Script®
por rukich
4
VWAP Entry Assistant (v1.0)Description: Anchored VWAP with a lightweight assistant for VWAP reversion trades. It shows the distance to VWAP, an estimated hit probability for the current bar, the expected number of bars to reach VWAP, and a recommended entry price. If the chance of touching VWAP is low, the script suggests an adjusted limit using a fraction of ATR. The VWAP line is white by default, and a compact summary table appears at the bottom-left. Educational tool. Not financial advice. Not affiliated with TradingView or any exchange. Always backtest before use.
Indicador Pine Script®
por Seaman88
Event Marking [zidaniee]This is not a technical analysis indicator, but a visual tool designed to mark important global events using vertical lines on your chart. By placing a single marker at the exact time an event occurred, you can compare how different assets reacted to that global event — before, during, and after it happened. In the example provided, the marking corresponds to the moment when U.S. President Donald Trump announced a 100% tariff on goods from China, which was immediately reflected in market reactions worldwide. The indicator includes full customization features for: • Event label text • Label size and position • Line color, style, and width Enjoy
Indicador Pine Script®
por zidaniee
1
Current Price (Customizable) by DRtradeCurrent Price Line & Dynamic Label (Fully Customizable) The ultimate tool for clear, real-time price visualization. This powerful, lightweight indicator draws a clean horizontal line at the current market price, updating instantly with every price tick. Unlike other current price line scripts, this tool ensures you always see where the price is right now and provides full control over every visual element. Key Features: - Real-Time Tracking: The line moves dynamically with price ticks within the current candle, eliminating lag and providing true current market price awareness. - Line Extension Control: Choose to extend: Left, Right, or Both. Helpful for scalpers and options traders - Visual Customizations: Color, Style, Size, Width, etc. - Label Positioning: Left of Candle, Above Candle, or Right of Candle All customization options are available in the indicator's settings menu. Ping me with feature reqeusts.
Indicador Pine Script®
por drtrade
2
Market Spiralyst [Hapharmonic]Hello, traders and creators! 👋 Market Spiralyst: Let's change the way we look at analysis, shall we? I've got to admit, I scratched my head on this for weeks, Haha :). What you're seeing is an exploration of what's possible when code meets art on financial charts. I wanted to try blending art with trading, to do something new and break away from the same old boring perspectives. The goal was to create a visual experience that's not just analytical, but also relaxing and aesthetically pleasing. This work is intended as a guide and a design example for all developers, born from the spirit of learning and a deep love for understanding the Pine Script™ language. I hope it inspires you as much as it challenged me! 🧐 Core Concept: How It Works Spiralyst is built on two distinct but interconnected engines: The Generative Art Engine: At its core, this indicator uses a wide range of mathematical formulas—from simple polygons to exotic curves like Torus Knots and Spirographs—to draw beautiful, intricate shapes directly onto your chart. This provides a unique and dynamic visual backdrop for your analysis. The Market Pulse Engine: This is where analysis meets art. The engine takes real-time data from standard technical indicators (RSI and MACD in this version) and translates their states into a simple, powerful "Pulse Score." This score directly influences the appearance of the "Scatter Points" orbiting the main shape, turning the entire artwork into a living, breathing representation of market momentum. 🎨 Unleash Your Creativity! This Is Your Playground We've included 25 preset shapes for you... but that's just the starting point ! The real magic happens when you start tweaking the settings yourself. A tiny adjustment can make a familiar shape come alive and transform in ways you never expected. I'm genuinely excited to see what your imagination can conjure up! If you create a shape you're particularly proud of or one that looks completely unique, I would love to see it. Please feel free to share a screenshot in the comments below. I can't wait to see what you discover! :) Here's the default shape to get you started: The Dynamic Scatter Points: Reading the Pulse This is where the magic happens! The small points scattered around the main shape are not just decorative; they are the visual representation of the Market Pulse Score. The points have two forms: A small asterisk (`*`): Represents a low or neutral market pulse. A larger, more prominent circle (`o`): Represents a high, strong market pulse. Here’s how to read them: The indicator calculates the Pulse Strength as a percentage (from 0% to 100%) based on the total score from the active indicators (RSI and MACD). This percentage determines the ratio of circles to asterisks. High Pulse Strength (e.g., 80-100%): Most of the scatter points will transform into large circles (`o`). This indicates that the underlying momentum is strong and It could be an uptrend. It's a visual cue that the market is gaining strength and might be worth paying closer attention to. Low Pulse Strength (e.g., 0-20%): Most or all of the scatter points will remain as small asterisks (`*`). This suggests weak, neutral, or bearish momentum. The key takeaway: The more circles you see, the stronger the bullish momentum is according to the active indicators. Watch the artwork "breathe" as the circles appear and disappear with the market's rhythm! And don't worry about the shape you choose; the scatter points will intelligently adapt and always follow the outer boundary of whatever beautiful form you've selected. How to Use Getting started with Spiralyst is simple: Choose Your Canvas: Start by going into the settings and picking a `Shape` and `Palette` from the "Shape Selection & Palette" group that you find visually appealing. This is your canvas. Tune Your Engine: Go to the "Market Pulse Engine" settings. Here, you can enable or disable the RSI and MACD scoring engines. Want to see the pulse based only on RSI? Just uncheck the MACD box. You can also fine-tune the parameters for each indicator to match your trading style. Read the Vibe: Observe the scatter points. Are they mostly small asterisks or are they transforming into large, vibrant circles? Use this visual feedback as a high-level gauge of market momentum. Check the Dashboard: For a precise breakdown, look at the "Market Pulse Analysis" table on the top-right. It gives you the exact values, scores, and total strength percentage. Explore & Experiment: Play with the different shapes and color palettes! The core analysis remains the same, but the visual experience can be completely different. ⚙️ Settings & Customization Spiralyst is designed to be highly customizable. Shape Selection & Palette: This is your main control panel. Choose from over 25 unique shapes, select a color palette, and adjust the line extension style ( `extend` ) or horizontal position ( `offsetXInput` ). scatterLabelsInput: This setting controls the total number of points (both asterisks and circles) that orbit the main shape. Think of it as adjusting the density or visual granularity of the market pulse feedback. The Market Pulse engine will always calculate its strength as a percentage (e.g., 75%). This percentage is then applied to the `scatterLabelsInput` number you've set to determine how many points transform into large circles. Example: If the Pulse Strength is 75% and you set this to `100` , approximately 75 points will become circles. If you increase it to `200` , approximately 150 points will transform. A higher number provides a more detailed, high-resolution view of the market pulse, while a lower number offers a cleaner, more minimalist look. Feel free to adjust this to your personal visual preference; the underlying analytical percentage remains the same. Market Pulse Engine: `⚙️ RSI Settings` & `⚙️ MACD Settings`: Each indicator has its own group. Enable Scoring: Use the checkbox at the top of each group to include or exclude that indicator from the Pulse Score calculation. If you only want to use RSI, simply uncheck "Enable MACD Scoring." Parameters: All standard parameters (Length, Source, Fast/Slow/Signal) are fully adjustable. Individual Shape Parameters (01-25): Each of the 25+ shapes has its own dedicated group of settings, allowing you to fine-tune every aspect of its geometry, from the number of petals on a flower to the windings of a knot. Feel free to experiment! For Developers & Pine Script™ Enthusiasts If you are a developer and wish to add more indicators (e.g., Stochastic, CCI, ADX), you can easily do so by following the modular structure of the code. You would primarily need to: Add a new `PulseIndicator` object for your new indicator in the `f_getMarketPulse()` function. Add the logic for its scoring inside the `calculateScore()` method. The `calculateTotals()` method and the dashboard table are designed to be dynamic and will automatically adapt to include your new indicator! One of the core design philosophies behind Spiralyst is modularity and scalability . The Market Pulse engine was intentionally built using User-Defined Types (UDTs) and an array-based structure so that adding new indicators is incredibly simple and doesn't require rewriting the main logic. If you want to add a new indicator to the scoring engine—let's use the Stochastic Oscillator as a detailed example—you only need to modify three small sections of the code. The rest of the script, including the adaptive dashboard, will update automatically. Here’s your step-by-step guide: #### Step 1: Add the User Inputs First, you need to give users control over your new indicator. Find the `USER INTERFACE: INPUTS` section and add a new group for the Stochastic settings, right after the MACD group. Create a new group name: `string GRP_STOCH = "⚙️ Stochastic Settings"` Add the inputs: Create a boolean to enable/disable it, and then add the necessary parameters (`%K`, `%D`, `Smooth`). Use the `active` parameter to link them to the enable/disable checkbox. // Add this code block right after the GRP_MACD and MACD inputs string GRP_STOCH = "⚙️ Stochastic Settings" bool stochEnabledInput = input.bool(true, "Enable Stochastic Scoring", group = GRP_STOCH) int stochKInput = input.int(14, "%K Length", minval=1, group = GRP_STOCH, active = stochEnabledInput) int stochDInput = input.int(3, "%D Smoothing", minval=1, group = GRP_STOCH, active = stochEnabledInput) int stochSmoothInput = input.int(3, "Smooth", minval=1, group = GRP_STOCH, active = stochEnabledInput) #### Step 2: Integrate into the Pulse Engine (The "Factory") Next, go to the `f_getMarketPulse()` function. This function acts as a "factory" that builds and configures the entire market pulse object. You need to teach it how to build your new Stochastic indicator. Update the function signature: Add the new `stochEnabledInput` boolean as a parameter. Calculate the indicator: Add the `ta.stoch()` calculation. Create a `PulseIndicator` object: Create a new object for the Stochastic, populating it with its name, parameters, calculated value, and whether it's enabled. Add it to the array: Simply add your new `stochPulse` object to the `array.from()` list. Here is the complete, updated `f_getMarketPulse()` function : // Factory function to create and calculate the entire MarketPulse object. f_getMarketPulse(bool rsiEnabled, bool macdEnabled, bool stochEnabled) => // 1. Calculate indicator values float rsiVal = ta.rsi(rsiSourceInput, rsiLengthInput) = ta.macd(close, macdFastInput, macdSlowInput, macdSignalInput) float stochVal = ta.sma(ta.stoch(close, high, low, stochKInput), stochDInput) // We'll use the main line for scoring // 2. Create individual PulseIndicator objects PulseIndicator rsiPulse = PulseIndicator.new("RSI", str.tostring(rsiLengthInput), rsiVal, na, 0, rsiEnabled) PulseIndicator macdPulse = PulseIndicator.new("MACD", str.format("{0},{1},{2}", macdFastInput, macdSlowInput, macdSignalInput), macdVal, signalVal, 0, macdEnabled) PulseIndicator stochPulse = PulseIndicator.new("Stoch", str.format("{0},{1},{2}", stochKInput, stochDInput, stochSmoothInput), stochVal, na, 0, stochEnabled) // 3. Calculate score for each rsiPulse.calculateScore() macdPulse.calculateScore() stochPulse.calculateScore() // 4. Add the new indicator to the array array indicatorArray = array.from(rsiPulse, macdPulse, stochPulse) MarketPulse pulse = MarketPulse.new(indicatorArray, 0, 0.0) // 5. Calculate final totals pulse.calculateTotals() pulse // Finally, update the function call in the main orchestration section: MarketPulse marketPulse = f_getMarketPulse(rsiEnabledInput, macdEnabledInput, stochEnabledInput) #### Step 3: Define the Scoring Logic Now, you need to define how the Stochastic contributes to the score. Go to the `calculateScore()` method and add a new case to the `switch` statement for your indicator. Here's a sample scoring logic for the Stochastic, which gives a strong bullish score in oversold conditions and a strong bearish score in overbought conditions. Here is the complete, updated `calculateScore()` method : // Method to calculate the score for this specific indicator. method calculateScore(PulseIndicator this) => if not this.isEnabled this.score := 0 else this.score := switch this.name "RSI" => this.value > 65 ? 2 : this.value > 50 ? 1 : this.value < 35 ? -2 : this.value < 50 ? -1 : 0 "MACD" => this.value > this.signalValue and this.value > 0 ? 2 : this.value > this.signalValue ? 1 : this.value < this.signalValue and this.value < 0 ? -2 : this.value < this.signalValue ? -1 : 0 "Stoch" => this.value > 80 ? -2 : this.value > 50 ? 1 : this.value < 20 ? 2 : this.value < 50 ? -1 : 0 => 0 this #### That's It! You're done. You do not need to modify the dashboard table or the total score calculation. Because the `MarketPulse` object holds its indicators in an array , the rest of the script is designed to be adaptive: The `calculateTotals()` method automatically loops through every indicator in the array to sum the scores and calculate the final percentage. The dashboard code loops through the `enabledIndicators` array to draw the table. Since your new Stochastic indicator is now part of that array, it will appear automatically when enabled! --- Remember, this is your playground! I'm genuinely excited to see the unique shapes you discover. If you create something you're proud of, feel free to share it in the comments below. Happy analyzing, and may your charts be both insightful and beautiful! 💛
Indicador Pine Script®
por hapharmonic
3
Multi-Timeframe 20 EMA Horizontal LinesOverview This Multi-Timeframe 20 EMA indicator provides intelligent trend analysis by displaying your current timeframe EMA alongside relevant higher timeframe EMA levels as horizontal support/resistance lines. On lower timeframes, you see all higher EMA levels for comprehensive multi-timeframe confluence, while on higher timeframes, it filters out lower timeframe noise to maintain focus on macro trends. This allows traders to align short-term entries with long-term market structure, identifying high-probability setups where multiple timeframe EMAs converge while using the current timeframe EMA for precise timing. Feature Multi-Timeframe Horizontal EMA Lines The indicator fetches and displays 20 EMAs from five higher timeframes: Daily (D): Daily 20 EMA Weekly (W): Weekly 20 EMA Monthly (M): Monthly 20 EMA Quarterly (Q): 3-Month 20 EMA Half-Yearly (HY): 6-Month 20 EMA Intelligent Timeframe Filtering Smart Display Logic: Only shows EMAs from timeframes higher than your current chart timeframe Prevents Redundancy: Automatically filters out lower timeframe EMAs to avoid clutter Example: On a 4-hour chart, you'll see Daily, Weekly, Monthly, Quarterly, and Half-Yearly EMAs, but on a Weekly chart, you'll only see Weekly and higher timeframes Half-Yearly (HY): 6-Month 20 EMA Shows only current timeframe EMA with half-yearly horizontal line, filtering out all lower timeframes. Quarterly (Q): 3-Month 20 EMA Displays current timeframe EMA with quarterly and higher horizontal lines, hiding monthly, weekly, and daily EMAs. Monthly (M): Monthly 20 EMA Shows current timeframe EMA with monthly and higher horizontal EMAs, excluding weekly and daily timeframes. Weekly (W): Weekly 20 EMA Displays current timeframe EMA with weekly and higher horizontal EMA lines, filtering out daily timeframe. Daily (D): Shows current timeframe EMA with all higher timeframe horizontal EMAs (daily, weekly, monthly, quarterly, half-yearly). Note: Make sure to enable Price-Line in Style Settings after Importing Script.
Indicador Pine Script®
por ShogunSteel
Auto AI Trendlines [TradingFinder] Clustering & Filtering Trends🔵 Introduction Auto AI trendlines Clustering & Filtering Trends Indicator, draws a variety of trendlines. This auto plotting trendline indicator plots precise trendlines and regression lines, capturing trend dynamics. Trendline trading is the strongest strategy in the financial market. Regression lines, unlike trendlines, use statistical fitting to smooth price data, revealing trend slopes. Trendlines connect confirmed pivots, ensuring structural accuracy. Regression lines adapt dynamically. The indicator’s ascending trendlines mark bullish pivots, while descending ones signal bearish trends. Regression lines extend in steps, reflecting momentum shifts. As the trend is your friend, this tool aligns traders with market flow. Pivot-based trendlines remain fixed once confirmed, offering reliable support and resistance zones. Regression lines, adjusting to price changes, highlight short-term trend paths. Both are vital for traders across asset classes. 🔵 How to Use There are four line types that are seen in the image below; Precise uptrend (green) and downtrend (red) lines connect exact price extremes, while Pivot-based uptrend and downtrend lines use significant swing points, both remaining static once formed. 🟣 Precise Trendlines Trendlines only form after pivot points are confirmed, ensuring reliability. This reduces false signals in choppy markets. Regression lines complement with real-time updates. The indicator always draws two precise trendlines on confirmed pivot points, one ascending and one descending. These are colored distinctly to mark bullish and bearish trends. They remain fixed, serving as structural anchors. 🟣 Dynamic Regression Lines Regression lines, adjusting dynamically with price, reflect the latest trend slope for real-time analysis. Use these to identify trend direction and potential reversals. Regression lines, updated dynamically, reflect real-time price trends and extend in steps. Ascending lines are green, descending ones orange, with shades differing from trendlines. This aids visual distinction. 🟣 Bearish Chart A Bullish State emerges when uptrend lines outweigh or match downtrend lines, with recent upward momentum signaling a potential rise. Check the trend count in the state table to confirm, using it to plan long positions. 🟣 Bullish Chart A Bearish State is indicated when downtrend lines dominate or equal uptrend lines, with recent downward moves suggesting a potential drop. Review the state table’s trend count to verify, guiding short position entries. The indicator reflects this shift for strategic planning. 🟣 Alarm Set alerts for state changes to stay informed of Bullish or Bearish shifts without constant monitoring. For example, a transition to Bullish State may signal a buying opportunity. Toggle alerts On or Off in the settings. 🟣 Market Status A table summarizes the chart’s status, showing counts of ascending and descending lines. This real-time overview simplifies trend monitoring. Check it to assess market bias instantly. Monitor the table to track line counts and trend dominance. A higher count of ascending lines suggests bullish bias. This helps traders align with the prevailing trend. 🔵 Settings Number of Trendlines : Sets total lines (max 10, min 3), balancing chart clarity and trend coverage. Max Look Back : Defines historical bars (min 50) for pivot detection, ensuring robust trendlines. Pivot Range : Sets pivot sensitivity (min 2), adjusting trendline precision to market volatility. Show Table Checkbox : Toggles display of a table showing ascending/descending line counts. Alarm : Enable or Disable the alert. 🔵 Conclusion The multi slopes indicator, blending pivot-based trendlines and dynamic regression lines, maps market trends with precision. Its dual approach captures both structural and short-term momentum. Customizable settings, like trendline count and pivot range, adapt to diverse trading styles. The real-time table simplifies trend monitoring, enhancing efficiency. It suits forex, stocks, and crypto markets. While trendlines anchor long-term trends, regression lines track intraday shifts, offering versatility. Contextual analysis, like price action, boosts signal reliability. This indicator empowers data-driven trading decisions.
Indicador Pine Script®
por TFlab
2
Volume Flow OscillatorVolume Flow Oscillator Overview The Volume Flow Oscillator is an advanced technical analysis tool that measures buying and selling pressure by combining price direction with volume. Unlike traditional volume indicators, this oscillator reveals the force behind price movements, helping traders identify strong trends, potential reversals, and divergences between price and volume. Reading the Indicator The oscillator displays seven colored bands that fluctuate around a zero line: Three bands above zero (yellow) indicate increasing levels of buying pressure Three bands below zero (red) indicate increasing levels of selling pressure The central band represents the baseline volume flow Color intensity changes based on whether values are positive or negative Trading Signals The Volume Flow Oscillator provides several valuable trading signals: Zero-line crossovers: When multiple bands cross from negative to positive, potential bullish shift; opposite for bearish Divergences: When price makes new highs/lows but oscillator bands fail to confirm, signals potential reversal Volume climax: Extreme readings where outer bands stretch far from zero often precede reversals Trend confirmation: Strong expansion of bands in direction of price movement confirms genuine momentum Support/resistance: During trends, bands may remain largely on one side of zero, showing continued directional pressure Customization Adjust these key parameters to optimize the oscillator for your trading style: Lookback Length: Controls overall sensitivity (shorter = more responsive, longer = smoother) Multipliers: Adjust sensitivity spread between bands for different market conditions ALMA Settings: Fine-tune how the indicator weights recent versus historical data VWMA Toggle: Enable for additional smoothing in volatile markets Best Practices For optimal results, use this oscillator in conjunction with price action and other confirmation indicators. The multi-band approach helps distinguish between minor fluctuations and significant volume events that might signal important market turns.
Indicador Pine Script®
por TheKaoticS
Auto TrendLines [TradingFinder] Support Resistance Signal Alerts🔵 Introduction The trendline is one of the most essential tools in technical analysis, widely used in financial markets such as Forex, cryptocurrency, and stocks. A trendline is a straight line that connects swing highs or swing lows and visually indicates the market’s trend direction. Traders use trendlines to identify price structure, the strength of buyers and sellers, dynamic support and resistance zones, and optimal entry and exit points. In technical analysis, trendlines are typically classified into three categories: uptrend lines (drawn by connecting higher lows), downtrend lines (formed by connecting lower highs), and sideways trends (moving horizontally). A valid trendline usually requires at least three confirmed touchpoints to be considered reliable for trading decisions. Trendlines can serve as the foundation for a variety of trading strategies, such as the trendline bounce strategy, valid breakout setups, and confluence-based analysis with other tools like candlestick patterns, divergences, moving averages, and Fibonacci levels. Additionally, trendlines are categorized into internal and external, and further into major and minor levels, each serving unique roles in market structure analysis. 🔵 How to Use Trendlines are a key component in technical analysis, used to identify market direction, define dynamic support and resistance zones, highlight strategic entry and exit points, and manage risk. For a trendline to be reliable, it must be drawn based on structural principles—not by simply connecting two arbitrary points. 🟣 Selecting Pivot Types Based on Trend Direction The first step is to determine the market trend: uptrend, downtrend, or sideways. Then, choose pivot points that match the trend type : In an uptrend, trendlines are drawn by connecting low pivots, especially higher lows. In a downtrend, trendlines are formed by connecting high pivots, specifically lower highs. It is crucial to connect pivots of the same type and structure to ensure the trendline is valid and analytically sound. 🟣 Pivot Classification This indicator automatically classifies pivot points into two categories : Major Pivots : MLL : Major Lower Low MHL : Major Higher Low MHH : Major Higher High MLH : Major Lower High These define the primary structure of the market and are typically used in broader structural analysis. Minor Pivots : mLL: minor Lower Low mHL: minor Higher Low mHH: minor Higher High mLH: minor Lower High These are used for drawing more precise trendlines within corrective waves or internal price movements. Example : In a downtrend, drawing a trendline from an MHH to an mHH creates structural inconsistency and introduces noise. Instead, connect points like MHL to MHL or mLH to mLH for a valid trendline. 🟣 Drawing High-Precision Trendlines To ensure a reliable trendline : Use pivots of the same classification (Major with Major or Minor with Minor). Ensure at least three valid contact points (three touches = structural confirmation). Draw through candles with the least deviation (choose wicks or bodies based on confluence). Preferably draw from right to left for better alignment with current market behavior. Use parallel lines to turn a single trendline into a trendline zone, if needed. 🟣 Using Trendlines for Trade Entries Bounce Entry: When price approaches the trendline and shows signs of reversal (e.g., a reversal candle, divergence, or support/resistance), enter in the direction of the trend with a logical stop-loss. Breakout Entry: When price breaks through the trendline with strong momentum and a confirmation (such as a retest or break of structure), consider trading in the direction of the breakout. 🟣 Trendline-Based Risk Management For bounce entries, the stop-loss is placed below the trendline or the last pivot low (in an uptrend). For breakout entries, the stop-loss is set behind the breakout candle or the last structural level. A broken trendline can also act as an exit signal from a trade. 🟣 Combining Trendlines with Other Tools (Confluence) Trendlines gain much more strength when used alongside other analytical tools : Horizontal support and resistance levels Moving averages (such as EMA 50 or EMA 200) Fibonacci retracement zones Candlestick patterns (e.g., Engulfing, Pin Bar) RSI or MACD divergences Market structure breaks (BoS / ChoCH) 🔵 Settings Pivot Period : This defines how sensitive the pivot detection is. A higher number means the algorithm will identify more significant pivot points, resulting in longer-term trendlines. Alerts Alert : Enable or disable the entire alert system Set a custom alert name Choose how often alerts trigger (every time, once per bar, or on bar close) Select the time zone for alert timestamps (e.g., UTC) Each trendline type supports two alert types : Break Alert : Triggered when price breaks the trendline React Alert : Triggered when price reacts or bounces off the trendline These alerts can be independently enabled or disabled for all trendline categories (Major/Minor, Internal/External, Up/Down). Display : For each of the eight trendline types, you can control : Whether to show or hide the line Whether to delete the previous line when a new one is drawn Color, line style (solid, dashed, dotted), extension direction (e.g., right only), and width Major lines are typically thicker and more opaque, while minor lines appear thinner and more transparent. All settings are designed to give the user full control over the appearance, behavior, and alert system of the indicator, without requiring manual drawing or adjustments. 🔵 Conclusion A trendline is more than just a line on the chart—it is a structural, strategic, and flexible tool in technical analysis that can serve as the foundation for understanding price behavior and making trading decisions. Whether in trending markets or during corrections, trendlines help traders identify market direction, key zones, and high-potential entry and exit points with precision. The accuracy and effectiveness of a trendline depend on using structurally valid pivot points and adhering to proper market logic, rather than relying on guesswork or personal bias. This indicator is built to solve that exact problem. It automatically detects and draws multiple types of trendlines based on actual price structure, separating them into Major/Minor and Internal/External categories, and respecting professional analytical principles such as pivot type, trend direction, and structural location.
Indicador Pine Script®
por TFlab
14
Multi Swing Point ConnectionsMulti Swing Point Connections — Tool for custom Highs & Lows structure mapping. This indicator allows to create fully customizable connections between multiple types of swing points, offering advanced visual structure of price dynamics. Features: Dynamic Swing Detection using adjustable pivot period. Connect up to 8 swing relationships, with individual controls for swing points: 🔴 Higher High, 🟠 Lower High, 🔵 Higher Low, 🟢 Lower Low Countback customization (steps for historical/future reference) Optional enabling/disabling per connection Visual Structure Mapping with configurable line color and width. Perfect for identifying key structure shifts Mapping trending vs consolidating phases Building your own internal order flow frameworks Inputs: Swing Period: Defines how many bars to the left/right are used to detect pivot highs/lows. Line Customization: Adjust style, width and color for visual clarity. Connection Parameters: Select which swing types to connect, and control how far back and forward to look when making the connection. Connection Examples: HH to LH - Mapping potential bearish transition. Often signals weakening bullish momentum and a potential bearish shift in structure. LL to HL - Mapping potential bullish transition. Suggests buyers stepping in earlier and potential bullish momentum building. HL to LH (or LH to HL) - these can indicate sideways structure — often in consolidating or compressing price action depending on custom steps. HH to HH (or LL to LL) - Connecting successive HHs or LLs visualizes higher highs in uptrends or lower lows in downtrends — a classic trend-following perspective. HL to HL (or LH to LH) - Connecting successive HLs (or LHs) can highlight the “internal” structure between impulse legs, often defining minor trend channels or short-term ranges within the larger trend.
Indicador Pine Script®
por fract
4
Flow Optimized Moving AverageOverview The Flow Optimized Moving Average (Flow OMA) is an advanced adaptive moving average designed to dynamically adjust smoothing factors based on market efficiency and volatility. By integrating the Efficiency Ratio (ER) with an Adaptive Moving Average (AMA) and leveraging ATR-based bands, this indicator provides traders with a refined tool for identifying trend direction, strength, and potential reversal zones. Key Features Adaptive Moving Average (AMA) Adjusts to price action based on the Efficiency Ratio (ER), reducing lag in trending markets while smoothing noise in ranging conditions. Efficiency Ratio (ER) Measures the effectiveness of price movement over a defined lookback period. Helps in dynamically adjusting the smoothing constant of the AMA. ATR-Based Volatility Bands Creates upper and lower dynamic bands based on the Average True Range (ATR). Expands in high volatility and contracts in low volatility, providing traders with a contextual understanding of price action. Slope-Based Trend Strength Normalizes the moving average slope relative to ATR. Generates a trend strength score, which influences band opacity, making strong trends visually distinguishable. Dynamic Color Coding Bullish Trends: Cyan/Turquoise (#00e2ff) Bearish Trends: Blue (#003ff5) Neutral Trends: Gray The transparency of the bands dynamically adjusts based on trend strength. Fill Zone Effect The area between the ATR bands is filled with a gradient-like effect, giving a clear visual representation of trend strength and transitions. Indicator Components Inputs (User Settings) ER Lookback Period: Defines how many bars are used in the Efficiency Ratio calculation (default: 10). Fast & Slow Periods: Control the sensitivity of the Adaptive Moving Average (default: 2 & 30). ATR Period: Defines the lookback for Average True Range (default: 14). Band Multiplier: Determines the width of ATR-based bands (default: 1.5). Slope Average Period: Smooths trend slope for more stable trend assessment (default: 5). Efficiency Ratio Calculation Measures how effectively price moves in a straight line compared to its total movement. A higher ER value suggests strong trend momentum, while a lower value implies consolidation. Adaptive Moving Average (AMA) Dynamically adjusts its smoothing factor based on ER. Uses a smoothing constant that ranges between the fastest and slowest specified values. Volatility-Based Bands Constructed using the ATR multiplier. Expand and contract dynamically in response to market volatility. Trend Strength & Direction Computed using the normalized slope of AMA against ATR. Positive slope = Bullish trend, Negative slope = Bearish trend. Visual Enhancements Colored Adaptive MA Line: Changes based on trend direction. ATR Bands with Gradient Fill: Visual representation of market conditions. Dynamic Opacity: Highlights trend strength through transparency. How to Use the Flow OMA Indicator Trend Identification When the Adaptive MA is rising and colored cyan, a bullish trend is in play. When the Adaptive MA is falling and colored blue, a bearish trend is present. Trend Strength Assessment A stronger trend results in more opaque band fills, indicating a clear directional bias. Weaker trends or consolidations result in fainter fills, signaling a loss of momentum. Reversal Signals If price touches the upper band in a bullish move and starts reversing, it can indicate potential profit-taking areas. If price approaches the lower band in a bearish move and rebounds, a short-term reversal may be imminent. Volatility Insights Narrow bands indicate low volatility and possible breakout conditions. Wider bands suggest increased volatility, warning traders of potential price swings. Best Practices ✅ Combine with Other Indicators Use RSI, MACD, or Volume Profile for confirmation before executing trades. ✅ Apply to Multiple Timeframes Works effectively in higher timeframes (1H, 4H, Daily) for trend trading. Can be utilized in lower timeframes (5m, 15m) for scalping setups. ✅ Adjust Parameters Based on Asset Volatility Increase ATR Period for stocks with high volatility. Reduce ATR Multiplier for forex pairs to avoid excessive band width. The Flow Optimized Moving Average (Flow OMA) is a powerful trend-following tool designed for both swing and intraday traders. Its adaptive nature allows it to efficiently track trends while minimizing false signals. By incorporating dynamic volatility bands and trend-sensitive color coding, this indicator enhances traders' ability to read price action effectively. Whether used standalone or in combination with other indicators, Flow OMA provides a significant edge in trend analysis.
Indicador Pine Script®
por paradoxalgo
StyleLibraryLibrary "StyleLibrary" A small library of Pine Script functions that return built-in style variables. method sizeStyle(size)   Takes a `string` that returns the corresponding built-in size style variable.   Namespace types: series string, simple string, input string, const string   Parameters:      size (string) : A `string` representing a built-in size style: `"Tiny"`, `"Small"`, `"Normal"`, `"Large"`, `"Huge"`, `"Auto"`.   Returns: The respective built-in size style variable. method sizeStyle(size)   Takes a `sizeStyle` that returns the corresponding built-in size style variable.   Namespace types: series sizeStyle   Parameters:      size (series sizeStyle) : A `sizeStyle` representing a built-in size style variable.   Returns: The respective built-in size style variable. method lineStyle(style)   Takes a `string` that returns the corresponding built-in line style variable.   Namespace types: series string, simple string, input string, const string   Parameters:      style (string) : A `string` representing a built-in line style: `"Dashed"`, `"Dotted"`, `"Solid"`.   Returns: The respective built-in line style variable. method lineStyle(style)   Takes a `lineStyle` that returns the corresponding built-in line style variable.   Namespace types: series lineStyle   Parameters:      style (series lineStyle) : A `lineStyle` representing a built-in line style variable.   Returns: The respective built-in line style variable. method labelStyle(style)   Takes a `string` that returns the corresponding built-in label style variable.   Namespace types: series string, simple string, input string, const string   Parameters:      style (string) : A `string` representing a built-in label style: `"Arrow Down"`, `"Arrow Up"`, `"Circle"`, `"Cross"`, `"Diamond"`, `"Flag"`, `"Label Center"`, `"Label Down"`, `"Label Left"`, `"Label Lower Left"`, `"Label Lower Right"`, `"Label Right"`, `"Label Up"`, `"Label Upper Left"`, `"Label Upper Right"`, `"None"`, `"Square"`, `"Text Outline"`, `"Triangle Down"`, `"Triangle Up"`, `"XCross"`.   Returns: The respective built-in label style variable. method labelStyle(style)   Takes a `labelStyle` that returns the corresponding built-in label style variable.   Namespace types: series labelStyle   Parameters:      style (series labelStyle) : A `labelStyle` representing a built-in label style variable.   Returns: The respective built-in label style variable. method fontStyle(font)   Takes a `string` that returns the corresponding built-in font style variable.   Namespace types: series string, simple string, input string, const string   Parameters:      font (string) : A `string` representing a built-in font style: `"Default"`, `"Monospace"`.   Returns: The respective built-in font style variable. method positionStyle(position)   Takes a `string` that returns the corresponding built-in position style variable.   Namespace types: series string, simple string, input string, const string   Parameters:      position (string) : A `string` representing a built-in position style: `"Bottom Center", `"Bottom Left", `"Bottom Right", `"Middle Center", `"Middle Left", `"Middle Right", `"Top Center", `"Top Left", `"Top Right".   Returns: The respective built-in position style variable. method displayStyle(display)   Takes a `simple string` that returns the corresponding built-in display style variable.   Namespace types: simple string, input string, const string   Parameters:      display (simple string) : A `simple string` representing a built-in display style: `"All"`, `"Data Window"`, `"None"`, `"Pane"`, `"Price Scale"`, `"Status Line"`.   Returns: The respective built-in display style variable.
Biblioteca Pine Script®
por joebaus
Sticky Moving AverageThe Sticky Moving Average is a custom indicator designed to provide a unique smoothing effect by combining different moving averages derived from a single base period. This indicator creates a single line on the chart, representing the average of the following three moving averages: 1. X-period Simple Moving Average (SMA): A traditional moving average that smooths the price data over the full period. 2. X/2-period Simple Moving Average (SMA): A faster-moving average that smooths the price data over half of the base period. 3. X/4-period Exponential Moving Average (EMA): An exponential moving average that gives more weight to recent prices, calculated over one-fourth of the base period. The result is a moving average that "sticks" to price action by considering both short-term and long-term trends, offering a balanced view of market momentum. This indicator is ideal for traders looking to gain a nuanced understanding of price movements by incorporating multiple smoothing periods into a single, easy-to-use line. Adjust the `X` value to suit your trading strategy and enjoy the clarity this composite moving average can bring to your charts.
Indicador Pine Script®
por henryoman
Time Vertical LineThis indicator is designed to plot vertical lines at specified hourly intervals on a trading chart. The indicator includes default settings to draw vertical lines at every hour of the day and provides users with the flexibility to customize up to six additional vertical lines at specified times. Traders can use the vertical lines to segment the trading day, making it easier to analyze market movements within specific hours. Customizable lines allow traders to mark important times such as market openings, closings, and economic news releases. This indicator is a powerful tool for traders who need to keep track of specific times and events during the trading day, providing a clear and customizable visual representation of time on their charts. The indicator allows you to easily customize the appearance of the 24 default vertical lines that mark each hour of the day. You can change the color by adjusting the Color input, modify the transparency using the Transparency input, and set the line width with the Line Width input. Each of custom lines can have its own color, transparency, and line width, giving you full control over their appearance. By default, these custom vertical lines are turned off. To activate them, go to the "Style" tab in the settings menu of the indicator. The time for each vertical line is based on the exchange's timezone. You can set the time for each of the 6 custom vertical lines using decimal notation. For example: Input 9.1 to display a vertical line at 9:10. Input 9.15 to display a vertical line at 9:15. The indicator should only be displayed in time frames less than 15 minutes. Go to "Visibility" in settings for options.
Indicador Pine Script®
por letailong
6
DeleteArrayType█ OVERVIEW Here are common functions usually delete drawing once array of drawing is recall. Method is used as in pine script version 5 instead of custom function. It is an upgrade from DeleteArrayObject , which may not support overload parameter in future. Library "DeleteArrayType" TODO: Delete array type especially for drawings method deleteLabel(id)   TODO: Delete array   Namespace types: array   Parameters:      id (array)   Returns: TODO: label.delete() method deleteLine(id)   TODO: Delete array   Namespace types: array   Parameters:      id (array)   Returns: TODO: line.delete() method deleteLineFill(id)   TODO: Delete array   Namespace types: array   Parameters:      id (array)   Returns: TODO: linefill.delete() method deletePolyLine(id)   TODO: Delete array   Namespace types: array   Parameters:      id (array)   Returns: TODO: polyline.delete() method deleteBox(id)   TODO: Delete array   Namespace types: array   Parameters:      id (array)   Returns: TODO: box.delete() method deleteTable(id)   TODO: Delete array   Namespace types: array   Parameters:      id (array)   Returns: TODO: table.delete()
Biblioteca Pine Script®
por RozaniGhani-RG