Começar

Largura das Bandas de Bollinger (BBW)

RSI & BB Oversold Scalper with MACD Confirmation [DotGain]RSI & BB Oversold Scalper with MACD Confirmation The RSI & BB Oversold Scalper is a mean reversion / dip-buying indicator designed for traders who want to combine oversold conditions with momentum confirmation . It uses a multi-step logic: first detect an oversold setup, then wait for a MACD confirmation within a defined time window before issuing a buy signal. --- Core Concept 1. Detect an oversold setup using Bollinger Bands %b, RSI and an optional DSS filter 2. Keep the setup active for a limited number of candles 3. Trigger the entry using a MACD bullish crossover 4. Reset after entry to avoid multiple signals from the same setup --- Buy Signal Logic A buy signal is generated when the following conditions are met: 1. Oversold Setup (filters can be enabled/disabled individually) • Bollinger Bands %b Oversold (Lookback-based) The price has traded below the lower Bollinger Band at least once within the last `lookbackBB` candles. • RSI Oversold (Lookback-based) The RSI has dropped below 30 at least once within the last `lookbackRSI` candles. • DSS (Double Smoothed Stochastic) Reversal Filter A bullish crossover of the DSS line above its signal line while the DSS value is below 20 , indicating a potential momentum reversal from oversold conditions. Note: BB %b and RSI are lookback filters , while the DSS condition is a single-bar crossover event . --- 2. MACD Confirmation (Entry Timing) After the setup becomes active, the indicator waits for a bullish MACD crossover (`MACD line crosses above Signal line`) within a user-defined time window (`validWindow` candles). If the MACD confirmation occurs within this window, a buy signal is printed. If the window expires without confirmation, the setup is discarded automatically. --- Reset Logic • After a buy signal, the setup is reset immediately • Only one signal is allowed per setup • No late entries after the time window expires --- Inputs & Customization • Enable or disable BB, RSI and DSS filters individually • Adjust lookback periods to control how recent oversold conditions must be • Tune the MACD confirmation window to balance early vs. conservative entries Smaller windows = faster, more aggressive entries Larger windows = fewer but more confirmed signals Recommended Markets & Timeframes • Cryptocurrencies, Forex, Indices, liquid stocks • Best suited for 1m – 15m scalping • Also usable on 15m – 1h for slower mean-reversion trades Visuals • Buy signals are displayed as labels below the price candles Important Notes • This indicator is a signal and timing tool , not a complete trading system • Always combine with higher-timeframe trend, support/resistance or volume analysis • Backtesting and paper trading are strongly recommended Disclaimer: This "RSI & BB Oversold Scalper with MACD Confirmation" (Oversold Scalper) indicator is provided for informational and educational purposes only. It does not, and should not be construed as, financial, investment, or trading advice. The signal generated by this tool (Green) is the result of a specific set of algorithmic conditions. They are not a direct recommendation to buy or sell any asset. The indicator's purpose is to highlight possible weakness in the markets, not to provide infallible trade signals. All trading and investing in financial markets involves a substantial risk of loss. You can lose all of your invested capital. Past performance is not indicative of future results. Even an indicator designed to filter out "chop" may produce false, lagging, or losing signals. Markets can remain unpredictable longer than you can remain solvent. The creator DotGain assumes no liability for any financial losses or damages you may incur, directly or indirectly, as a result of using this indicator or the information it provides. You are solely responsible for your own trading and investment decisions. Always conduct your own research (DYOR), validate signals with other methods, and consider your personal risk tolerance before entering any trade.
Indicador Pine Script®
por DotGain
2
Bollinger Band ToolkitBollinger Band Toolkit An advanced, adaptive Bollinger Band system for traders who want more context, precision, and edge. This indicator expands on the classic Bollinger Bands by combining statistical and volatility-based methods with modern divergence and squeeze detection tools. It helps identify volatility regimes, potential breakouts, and early momentum shifts — all within one clean overlay. 🔹 Core Features 1. Adaptive Bollinger Bands (σ + ATR) Classic 20-period bands enhanced with an ATR-based volatility adjustment, making them more responsive to true market movement rather than just price variance. Reduces “overreacting” during chop and avoids bands collapsing too tightly during trends. 2. %B & RSI Divergence Detection 🟢 Green dots: Positive %B divergence — price makes a lower low, but %B doesn’t confirm (bullish). 🔴 Red dots: Negative %B divergence — price makes a higher high, but %B doesn’t confirm (bearish). ✚ Red/green crosses: RSI divergence confirmation — momentum fails to confirm the price’s new extreme. These signals highlight potential reversal or slowdown zones that are often invisible to the naked eye. 3. Bollinger Band Squeeze (with Volume Filter) Yellow squares (■) show periods when Bollinger Bands are at their narrowest relative to recent history. Volume confirmation ensures the squeeze only triggers when both volatility and participation contract. Often marks the “calm before the storm” — breakout potential zones. 4. Multi-Timeframe Breakout Markers Optionally displays breakouts from higher or lower timeframes using different colors/symbols. Lets you see when a higher timeframe band break aligns with your current chart — a strong trend continuation signal. 5. Dual- and Triple-Band Visualization (±1σ, ±2σ, ±3σ) Optional inner (±1σ) and outer (±3σ) bands provide a layered volatility map: Price holding between ±1σ → stable range / mean-reverting behavior Price riding near ±2σ → trending phase, sustained momentum Price touching or exceeding ±3σ → volatility expansion or exhaustion zone This triple-band layout visually distinguishes normal movement from statistical extremes, helping you read when the market is balanced, expanding, or approaching its limits. ⚙️ Inputs & Customization Choose band type (SMA/EMA/SMMA/WMA/VWMA) Adjust deviation multiplier (σ) and ATR multiplier Toggle individual features (divergence dots, squeeze markers, inner bands, etc.) Multi-timeframe and colour controls for advanced users 🧠 How to Use Watch for squeeze markers followed by a breakout bar beyond ±2σ → volatility expansion signal. Combine divergence dots with RSI or price structure to anticipate slowdowns or reversals. Confirm direction using multi-timeframe breakouts and volume expansion. 💬 Why It Works This toolkit transforms qualitative chart reading (tight bands, hidden divergence) into quantitative, testable conditions — giving you objective insights that can be backtested, coded, or simply trusted in live setups.
Indicador Pine Script®
por LinesOnRice
John Bollinger's Bollinger BandsJapanese below / 日本語説明は下記 This indicator replicates how John Bollinger, the inventor of Bollinger Bands, uses Bollinger Bands, displaying Bollinger Bands, %B and Bandwidth in one indicator with alerts and signals. Bollinger Bands is created by John Bollinger in 1980s who is an American financial trader and analyst. He introduced %B and Bandwidth 30 years later. 🟦 What's different from other Bollinger Bands indicator? Unlike the default Bollinger Bands or other custom Bollinger Bands indicators on TradingView, this indicator enables to display three Bollinger Bands tools into a single indicator with signals and alerts capability. You can plot the classic Bollinger Bands together with either %B or Bandwidth or three tools altogether which requires the specific setting(see below settings). This makes it easy to quantitatively monitor volatility changes and price position in relation to Bollinger Bands in one place. 🟦 Features: Plots Bollinger Bands (Upper, Basis, Lower) with fill between bands. Option to display %B or Bandwidth with Bollinger Bands. Plots highest and lowest Bandwidth levels over a customizable lookback period. Adds visual markers when Bandwidth reaches its highest (Bulge) or lowest (Squeeze) value. Includes ready-to-use alert conditions for Bulge and Squeeze events. 📈Chart Green triangles and red triangles in the bottom chart mark Bulges and Squeezes respectively. 🟦 Settings: Length: Number of bars used for Bollinger Band middleline calculation. Basis MA Type: Choose SMA, EMA, SMMA (RMA), WMA, or VWMA for the midline. StdDev: Standard deviation multiplier (default = 2.0). Option: Select "Bandwidth" or "%B" (add the indicator twice if you want to display both). Period for Squeeze and Bulge: Lookback period for detecting the highest and lowest Bandwidth levels.(default = 125 as specified by John Bollinger ) Style Settings: Colors, line thickness, and transparency can be customized. 📈Chart The chart below shows an example of three Bollinger Bands tools: Bollinger Band, %B and Bandwidth are in display. To do this, you need to add this indicator TWICE where you select %B from Option in the first addition of this indicator and Bandwidth from Option in the second addition. 🟦 Usage: 🟠Monitor Volatility: Watch Bandwidth values to spot volatility contractions (Squeeze) and expansions (Bulge) that often precede strong price moves. John Bollinger defines Squeeze and Bulge as follows; Squeeze: The lowest bandwidth in the past 125 period, where trend is born. Bulge: The highest bandwidth in the past 125 period where trend is going to die. According to John Bollinger, this 125 period can be used in any timeframe. 📈Chart1 Example of Squeeze You can see uptrends start after squeeze(red triangles) 📈Chart2 Example of Bulge You can see the trend reversal from downtrend to uptrends at the bulge(green triangles) 📈Chart3 Bulge DOES NOT NECESSARILY mean the beginning of a trend in opposite direction. For example, you can see a bulge happening in the right side of the chart where green triangles are marked. Nevertheless, uptrend still continues after the bulge. In this case, the bulge marks the beginning of a consolidation which lead to the continuation of the trend. It means that a phase of the trend highlighted in the light blue box came to an end. Note: light blue box is not drawn by the indicator. Like other technical analysis methods or tools, these setups do not guarantee birth of new trends and trend reversals. Traders should be carefully observing these setups along with other factors for making decisions. 🟠Track Price Position: Use %B to see where price is located in relation to the Bollinger Bands. If %B is close to 1, the price is near upper band while %B is close to 0, the price is near lower band. 🟠Set Alerts: Receive alerts when Bandwidth hits highest and lowest values of bandwidth, helping you prepare for potential breakout, ending of trends and trend reversal opportunities. 🟠Combine with Other Tools: This indicator would work best when combined with price action, trend analysis, or market environmental analysis. ————————————————————————————— このインジケーターはボリンジャーバンドの考案者であるジョン・ボリンジャー氏が提唱するボリンジャーバンドの使い方を再現するために、ボリンジャーバンド、%B、バンドウィズ(Bandwidth) の3つを1つのインジケーターで表示可能にしたものです。シグナルやアラートにも対応しています。 ボリンジャーバンドは1980年代にアメリカ人トレーダー兼アナリストのジョン・ボリンジャー氏によって開発されました。彼はその30年後に%Bとバンドウィズを導入しました。 🟦 他のボリンジャーバンドとの違い TradingView標準のボリンジャーバンドや他のボリンジャーバンドとは異なり、このインジケーターでは3つのボリンジャーバンドツールを1つのインジケーターで表示し、シグナルやアラート機能も利用できるようになっています。 一般的に知られている通常のボリンジャーバンドに加え、%Bやバンドウィズを組み合わせて表示でき、設定次第では3つすべてを同時にモニターすることも可能です。これにより、価格とボリンジャーバンドの位置関係とボラティリティ変化をひと目で、かつ定量的に把握することができます。 🟦 機能: ボリンジャーバンド（アッパーバンド・基準線・ロワーバンド）を描画し、バンド間を塗りつぶし表示。 オプションで%Bまたはバンドウィズを追加表示可能。 バンドウィズの最高値・最安値を、任意の期間で検出して表示。 バンドウィズが指定期間の最高値（バルジ※）または最安値（スクイーズ）に達した際にシグナルを表示。 ※バルジは一般的にボリンジャーバンドで用いられるエクスパンションとほぼ同じ意味ですが、定義が異なります。(下記参照) バルジおよびスクイーズ発生時のアラート設定が可能。 📈 チャート例
 下記チャートの緑の三角と赤の三角は、それぞれバルジとスクイーズを示しています。 🟦 設定: Length: ボリンジャーバンドの基準線計算に使う期間。 Basis MA Type: SMA, EMA, SMMA (RMA), WMA, VWMAから選択可能。 StdDev: 標準偏差の乗数（デフォルト2.0）。 Option: 「Bandwidth」または「%B」を選択（両方表示するにはこのインジケーターを2回追加）。 Period for Squeeze and Bulge: Bandwidthの最高値・最安値を検出する期間（デフォルトはジョン・ボリンジャー氏が推奨する125）。 Style Settings: 色、線の太さ、透明度などをカスタマイズ可能。 📈 チャート例
 下のチャートは「ボリンジャーバンド」「%B」「バンドウィズ」の3つを同時に表示した例です。
この場合、インジケーターを2回追加し、最初に追加した方ではOptionを「%B」に、次に追加した方では「Bandwidth」を選択します。 🟦 使い方: 🟠 ボラティリティを監視する:
 バンドウィズの値を見ることで、価格変動の収縮（スクイーズ）や拡大（バルジ）を確認できます。 これらはしばしば強い値動きの前兆となります。 ジョン・ボリンジャー氏はスクイーズとバルジを次のように定義しています： スクイーズ: 過去125期間の中で最も低いバンドウィズ→ 新しいトレンドが生まれる場所。 バルジ: 過去125期間の中で最も高いバンドウィズ → トレンドが終わりを迎える場所。 この「125期間」はどのタイムフレームでも利用可能とされています。 📈 チャート1 スクイーズの例
赤い三角のスクイーズの後に上昇トレンドが始まっているのが確認できます。
 📈 チャート2 バルジの例
緑の三角のバルジの箇所で下降トレンドから上昇トレンドへの反転が見られます。
 📈 チャート3 バルジが必ずしも反転を意味しない例
 下記のチャート右側の緑の三角で示されたバルジの後も、上昇トレンドが継続しています。
この場合、バルジは反転ではなく「トレンド一時的な調整（レンジ入り）」を示しており、結果的に上昇トレンドが継続しています。 この場合、バルジは水色のボックスで示されたトレンドのフェーズの終わりを示しています。 
 ※水色のボックスはインジケーターが描画したものではありません。 
また、他のテクニカル分析と同様に、これらのセットアップは必ず新しいトレンドの発生やトレンド転換を保証するものではありません。トレーダーは他の要素も考慮し、慎重に意思決定する必要があります。 🟠 価格とボリンジャーバンドの位置関係を確認する:
 %Bを利用すれば、価格がバンドのどこに位置しているかを簡単に把握できます。
%Bが1に近ければ価格はアッパーバンド付近、0に近ければロワーバンド付近にあります。 🟠 アラートを設定する:
 バンドウィズが一定期間の最高値または最安値に到達した際にアラートを設定することで、ブレイクアウトやトレンド終了、反転の可能性に備えることができます。 🟠 他のツールと組み合わせる:
 このインジケーターは、プライスアクション、トレンド分析、環境認識などと組み合わせて活用すると最も効果的です。
Indicador Pine Script®
por FX365_Thailand
Bollinger Bands ETSOverview Bollinger Bands ETstyle (BB ETS) is an advanced volatility and breakout detection indicator, building upon the classic Bollinger Bands. This script introduces adaptive ATR-based band width smoothing and clear squeeze detection, making it a versatile tool for traders seeking more responsive and actionable volatility analysis. Features Dual Bollinger Bands: Plots both standard and outer bands around a configurable moving average, allowing visualization of typical and extreme volatility ranges. ATR-Based Band Smoothing (Optional): When enabled, the bands automatically widen during low-volatility periods using the Average True Range (ATR), reducing false signals and making the bands more adaptive. Squeeze Detection (Optional): Highlights periods when the bands contract below a user-defined threshold, signaling potential breakout setups. Squeeze periods are visually marked with a background highlight for easy identification. Customizable Settings: Users can adjust band length, standard deviation multipliers, ATR parameters, and squeeze thresholds. Both ATR smoothing and squeeze detection can be toggled on or off. Clean Chart Output: The indicator overlays directly on price with clear, distinguishable visuals for all features. How It Works The indicator calculates a moving average (basis) and plots upper and lower bands at user-selected standard deviations. If ATR smoothing is enabled, the band width expands by a multiple of the ATR, adapting to real-time volatility. The script computes the relative band width ("bandwidth"). When this falls below your chosen threshold, the background is highlighted to indicate a "squeeze"-a period of reduced volatility that often precedes breakouts. How to Use Trend & Volatility Analysis: Use the bands to identify overbought/oversold conditions and current market volatility. Price touching or crossing the outer bands may signal trend exhaustion or continuation. Breakout Anticipation: Watch for background highlights indicating a squeeze. These periods suggest the market is coiling for a potential significant move. Adaptive Sensitivity: Enable ATR smoothing to keep bands relevant during both calm and volatile markets, reducing false signals in low-volatility conditions. Customization: Adjust all parameters in the settings to match your trading style and the asset’s behavior. Limitations The indicator is designed for standard price charts and may not perform as intended on non-standard chart types (such as Renko or Heikin Ashi). As with all technical tools, best results are achieved when used alongside other forms of analysis. Summary Bollinger Bands ETstyle (BB ETS) offers a modern, adaptive approach to volatility and breakout analysis by combining classic bands with ATR-based smoothing and clear squeeze visualization. It is suitable for trend-following and breakout strategies, and requires no additional scripts-simply apply to your chart and adjust the settings as needed.
Indicador Pine Script®
por mr_uponly
Bollinger Bands MTF & Kalman Filter | Flux Charts📈 Multi-Timeframe Kalman Filtered Bollinger Bands Indicator Introducing our MTF Kalman Filtered Bollinger Bands – a powerful multi-timeframe Bollinger Bands (BB) indicator enhanced with Kalman filtering for superior smoothing and trend analysis. This indicator dynamically adapts Bollinger Bands across multiple timeframes while incorporating volume-based gradient transparency to highlight significant price movements. This indicator is better optimized for lower timeframes. ❓ How to Interpret the Bands & Volume Gradient: Our indicator combines Lower Timeframe (LTF) and Higher Timeframe (HTF) Bollinger Bands to provide a comprehensive trend analysis. It applies Kalman filtering to the LTF bands, ensuring smoother, noise-reduced signals. The color gradient and relative volume-based transparency offer deeper insights into price strength. 🔹 LTF Bollinger Bands: Shorter-period bands filtered with a Kalman smoothing algorithm, reducing lag and noise. 🔹 HTF Bollinger Bands: Traditional Bollinger Bands plotted on a higher timeframe, offering macro trend analysis. 🔹 Volume Gradient Transparency: The bands adjust their opacity based on relative buy/sell volume, allowing traders to assess momentum strength. 📌 How Does It Work? 1️⃣ Multi-Timeframe Bollinger Bands Calculation The LTF BB uses Kalman filtering for a smoother price representation, helping to reduce false signals. The HTF BB is EMA-smoothed for improved trend clarity. 2️⃣ Adaptive Gradient Transparency The opacity of the fill color between the bands is determined by relative buy/sell volume. Higher buy volume = stronger bullish signal (greener bands). Higher sell volume = stronger bearish signal (redder bands). 3️⃣ Dynamic Trend Signals & Breakouts Buy Signal: When price breaks below the HTF lower band and LTF bands start rising. Sell Signal: When price breaks above the HTF upper band and LTF bands start falling. ⚙️ Settings & Customization: 🛠 LTF and HTF Bollinger Bands Settings: Multiplier: The multiplier applied to the BB to determine the upper and lower bands Length: Define the number of bars determines the BB calculations. Custom Timeframe Selection: Choose from predefined options (e.g., 5m, 15m, 1H, 4H, etc). 🎨 Gradient & Transparency Settings: Bullish/Bearish Color Options: Customize colors for uptrend and downtrend conditions. Max & Min Opacity: Adjust the transparency levels based on volume intensity. Solid vs. Gradient Mode: Choose between a gradient fill or a solid color mode for clarity. 📌 Recommended Settings for Optimal Use: 1️⃣ Timeframe Selection (LTF -> HTF): 1 min -> 5 min 2 min -> 5 min 3 min -> 15 min 5 min -> 15 min 15 min -> 1 hr 1 hr -> 4 hr 4 hr -> 1 day 2️⃣ Multiplier: Use 2.0 for LTF and 2.25 for HTF 3️⃣Length: Use a length of 20 - 30 bars 🚀 Why Use This Indicator? ✅ Multi-Timeframe Bollinger Bands with Kalman Filtering – Ideal for traders looking for reduced lag and clearer trend signals. ✅ Volume-Based Transparency – See momentum shifts instantly with adaptive opacity. ✅ Dynamic Buy & Sell Signals – Alerts based on price action + volume trends. ✅ Customizable for Any Strategy – Adjust colors, timeframes, and filtering options for personalized trading.
Indicador Pine Script®
por fluxchart
15
Rectified BB% for option tradingThis indicator shows the bollinger bands against the price all expressed in percentage of the mean BB value. With one sight you can see the amplitude of BB and the variation of the price, evaluate a reenter of the price in the BB. The relative price is visualized as a candle with open/high/low/close value exspressed as percentage deviation from the BB mean The indicator include a modified RSI, remapped from 0/100 to -100/100. You can choose the BB parameters (length, standard deviation multiplier) and the RSI parameter (length, overbougth threshold, ovrsold threshold) You can exclude/include the candles and the RSI line. The indicator can be used to sell options when the volatility is high (the bollinger band is wide) and the price is reentering inside the bands. If the price is forming a supply or demand area it can be a good opportunity to sell a bull put or a bear call The RSI can be used as confirm of the supply/demand formation If the bollinger band is narrow and the RSI is overbought/oversold it indicate a better opportunity to buy options the indicator is designed to work with daily timeframe and default parameters.
Indicador Pine Script®
por Shagrath84
1
Greedy DCA█  OVERVIEW Detect price crashes in volatile conditions. This is an indicator for a greedy dollar cost average (DCA) strategy. That is, for people who want to repeatedly buy an asset over time when its price is crashing. █  CONCEPTS Price crashes are indicated if the price falls below one or more of the 4 lower Bollinger Bands which are calculated with increasing multipliers for the standard deviation. In these conditions, the price is far below the average. Therefore they are considered good buying opportunities. No buy signals are emitted if the Bollinger Bands are tight, i.e. if the bandwidth (upper -lower band) is below the value of the moving average multiplied with a threshold factor. This ensures that signals are only emitted if the conditions are highly volatile. The Bollinger Bands are calculated based on the daily candles, irrespective the chart time frame. This allows to check the strategy on lower time frames
Indicador Pine Script®
por GongFu
1
custom Bollinger bands with filters - indicator (AS)-----------Description------------- This indicator is basically Bollinger bands with many ways to customize. It uses highest and lowest values of upper and lower band for exits. I think something is wrong with the script but cant find any mistakes – most probably smoothing. The ATR filter is implemented but is working incorrectly. In code you can also turn it into strategy but I do not recommend it for now as it is not ready yet. So this is my first script and I am looking for any advice, ideas to improve this script, sets of parameters, markets to apply, logical mistakes in code or any ideas that you may have. Indicator was initially designed for EURUSD 5MIN but I would be interested in other ideas. -----------SETTINGS-------------- ---START - In starting settings we can choose Line 1: what parts to use BB/DC/ATR Line 2: what parts to plot on chart Line 3 Whether or not apply smoothing to BB or ATR filter Line 4 Calculate deviation for BB from price or Moving average Line 5 Fill colors and plot other parts for debug (overlay=false) Line 6:( for strategy) – enable Long/Short Trades ---BB and DC – here we modify Bollinger bands and Donchian Line 1: Length and type of BB middle line and also length of DC from BB Line 2: Length and type of BB standard deviation and multiplier Line 3: Length and type of BB smoothing and %width for BB filter ---ATR filter – (not ready fully yet) Line 1: type and length of ATR Line 2: threshold and smoothing value of ATR ---DATE and SESSION Line 1: apply custom date or session? Line 2: session hours settings Line 3:Custom starting date Line 4: Custom Ending date -----------HOW TO USE-------------- We open Long if BB width is bigger than threshold and close when upper band is no longer highest in the period set. Exact opposite with Short
Indicador Pine Script®
por Adam-Szafranski
2
FibonRSI / ErkOziHello, This software is a technical analysis script written in the TradingView Pine language. The script creates a trading indicator based on Fibonacci retracement levels and the RSI indicator, providing information about price movements and asset volatility by using Bollinger Bands. There are many different scripts in the market that draw RSI and Fibonacci retracement levels. However, this script was originally designed by me and shared publicly on TradingView. ***The indicator uses RSI (Relative Strength Index) and Bollinger Bands (BB) as the basis for the FibonRSI strategy. RSI measures the strength of a price movement, and BB measures the volatility of an asset. The FibonRSI strategy is based on the idea that the Fibonacci ratios and RSI can be used to predict a asset's price retracement levels. ***The script allows for various parameters to be adjusted. Users can specify the price source type and adjust the periods for RSI and Bollinger Bands. The standard deviation number for Bollinger Bands can also be customized. ***The script calculates the current RSI indicator position and the basic, upper, and lower levels of Bollinger Bands. It then calculates and draws the Fibonacci retracement levels. The color of the RSI line is determined by the upper and lower distribution levels of Bollinger Bands. Additionally, the color of the Fibonacci retracement levels can also be customized by the user. ***This script can be used to determine potential buy and sell signals using Fibonacci retracement levels and RSI. For example, when the RSI is oversold and the price is close to a Fibonacci retracement level, it can be interpreted as a buying opportunity. Similarly, when the RSI is overbought and the price is close to a Fibonacci retracement level, it can be interpreted as a selling opportunity. ***The script takes input parameters such as the price source used for calculation, the period for the RSI indicator, the period for the Moving Average in Bollinger Bands, and the number of standard deviations used in Bollinger Bands. ***The script's conditions include elements such as calculating the current position of the RSI indicator, calculating the upper and lower Bollinger Bands, calculating the dispersion factor, and calculating Fibonacci levels. ***The parameters in the code can be adjusted for calculation, including the price type used, the RSI period, the Moving Average period for BB, and the standard deviation count for BB. After this, the current position of the RSI, Moving Average, and standard deviation for BB are calculated. After calculating the upper and lower BB, the levels above and below the average are calculated using a specific dispersion constant. CONDITIONS FOR THE SCRIPT current_rsi = ta.rsi(src, for_rsi) // Current position of the RSI indicator basis = ta.ema(current_rsi, for_ma) dev = for_mult * ta.stdev(current_rsi, for_ma) upper = basis + dev lower = basis - dev dispersion = 1 disp_up = basis + (upper - lower) * dispersion disp_down = basis - (upper - lower) * dispersion // Fibonacci Levels f100 = basis + (upper - lower) * 1.0 f78 = basis + (upper - lower) * 0.78 f65 = basis + (upper - lower) * 0.65 f50 = basis f35 = basis - (upper - lower) * 0.65 f23 = basis - (upper - lower) * 0.78 f0 = basis - (upper - lower) * 1.0 ***When calculating Fibonacci levels, the distance between the average of BB and the upper and lower BB is used. These levels are 0%, 23.6%, 35%, 50%, 65%, 78.6%, and 100%. Finally, the RSI line that changes color according to a specific RSI position, Fibonacci levels, and BB are visualized. Additionally, the levels of 70, 30, and 50 are also shown. The script then sets the color of the RSI position according to the EMA and draws Bollinger Bands, RSI, Fibonacci levels, and the 70, 30, and 50 levels. In conclusion, this script enables traders to analyze market trends and make informed decisions. It can also be customized to suit individual trading strategies. This script analyzes the RSI indicator using Bollinger Bands and Fibonacci levels. The default settings are 14 periods for RSI, 233 periods and 2 standard deviations for BB. The MA period inside BB is selected as the BB period and is used when calculating Fibonacci levels. ***The reason for selecting these settings is to provide enough time for BB period to confirm a possible trend. Additionally, the MA period inside BB is matched with the BB period and used when calculating Fibonacci levels. ***Fibonacci levels are calculated from the distance between the upper and lower bands of BB and show how RSI movement is related to these levels. Better results can be achieved when RSI periods are set to Fibonacci numbers such as 21, 55, and 89. Therefore, the use of Fibonacci numbers is recommended when adjusting RSI periods. Fibonacci numbers are among the technical analysis tools that can capture the reflection of naturally occurring movements in the market. Therefore, the use of Fibonacci numbers often helps to better track fluctuations in the market. Finally, the indicator also displays the 70 and 30 levels and the middle level (50) with Fibonacci levels drawn in circles. Changing these settings can help optimize the Fibonacci levels and further improve the indicator. Thank you in advance for your suggestions and opinions......
Indicador Pine Script®
por ErkOzi
Bollinger Bands %B (ValueRay)One of the key features of this BB%B is its ability to highlight overbought and oversold conditions. This allows you to make informed decisions on when to enter and exit a trade, helping you maximize your profits and minimize your losses. - Bollinger Bands %B with the ability to change to a different Time Frame.(Defaults to current Chart Time Frame). - Ability To Turn On/Off Background Highlighting if BB %B is Above/Below 0 / 1 thresholds. - Ability To Turn On/Off Background Highlighting when BB %B Crosses back above/unser 0/1 thresholds. --- My personal recommandation use: combine with CM_Ultimate RSI Multi Time Frame (ChrisMoody) and have solid oversold/overbought levels, when hes RSI and my BB %B are bot red/green
Indicador Pine Script®
por derMatzeImNetz
+ Bollinger Bands WidthHere is my rendition of Bollinger Bands Width. If you are unfamiliar, Bollinger Bands Width is a measure of the distance between the top and bottom bands of Bollinger Bands. Bollinger Bands themselves being a measure of market volatility, BB Width is a simpler, cleaner way of determining the amount of volatility in the market. Myself, I found the original, basic version of BB Width a bit too basic, and I thought that by adding to it it might make for an improvement for traders over the original. Simple things that I've done are adding a signal line; adding a 'baseline' using Donchian Channels (such as that which is in my Average Candle Bodies Range indicator); adding bar and background coloring; and adding alerts for increasing volatility, and baseline and signal line crosses. It really ends up making for a much improved version of the basic indicator. A note on how I created the baseline: First, what do I mean by 'baseline?' I think of it as an area of the indicator where if the BB Width is below you will not want to enter into any trades, and if the BB Width is above then you are free to enter trades based on your system. It's basically a volatility measure of the volatility indicator. Waddah Attar Explosion is a popular indicator that implements something similar. The baseline is calculated thus: make a Donchian Channel of the BB Width, and then use the basis as the baseline while not plotting the actual highs and lows of the Donchian Channel. Now, the basis of a Donchian Channel is the average of the highs and the lows. If we did that here we would have a baseline much too high, however, by making the basis adjustable with a divisor input it no longer must be plotted in the center of the channel, but may be moved much lower (unless you set the divisor to 2, but you wouldn't do that). This divisor is essentially a sensitivity adjustment for the indicator. Of course you don't have to use the baseline. You could ignore it and only use the signal line, or just use the rising and falling of the BB Width by itself as your volatility measure. I should make note: the main image above at default settings is an 8 period lookback (so, yes, that is quite fast), and the signal line is a Hull MA set to 13. The background and bar coloring are simply set to the rising and falling of the BB Width. Images below will show some different settings, but definitely play with it yourself to determine if it might be a good fit for your system. Above, settings are background and bar coloring tuned to BB Width being above the baseline, and also requiring that the BB Width be rising. Background coloring only highlights increasing volatility or volatility above a certain threshold. Grey candles are because the BB Width is above the baseline but falling. We'll see an example without the requirement of BB Width rising, below. Here, we see that background highlights and aqua candles are more prevalent because I've checked off the requirement that BB Width be rising. The idea is that BB Width is above the baseline therefor there is sufficient volatility to enter trades if our indicators give us the go-ahead. This here is set to BB Width being above the signal line and also requiring a rising BB Width. Keep in mind the signal line is a Hull MA. And this fourth and final image uses a volume-weighted MA as the signal line. Bar coloring is turned off, and instead the checkboxes for volatility advancing and declining are turned on under the signal line options. BB Width crosses up the signal line is advancing volatility, while falling below it is declining volatility. Background highlights are set to baseline and not requiring a rising BB Width. This way, with a quick glance you can see if the rising volatility is legitimate, i.e., is the cross up of the signal line coupled with it being above the baseline. Please enjoy.
Indicador Pine Script®
por ClassicScott
5
Bollinger Bands SignalsDescription: This indicator works well in trendy markets on long runs and in mean-reverting markets, at almost any timeframe. That said, higher timeframes are much preferred for their intrinsic ability to cut out noise. The example chart is in 3H TF. Be mindful, the script shows somewhat erratic jigsaw-like behaviour during consolidation periods when the price jumps up and down in indecision which way to go. Fortunately, there are scripts out there that detect such periods. You can choose between 4 Moving Averages, Vidya being the default. Period, Deviation and Bands Width parameters all of them affect the signal generation. For the Pine Script coder this script is pretty obvious. It uses a standard technical analysis indicator - Bollinger Bands - and appends it with a 'width' parameter and a signal generation procedure. The signal generation procedure is the heart of this script that keeps the script pumping signals. The BB width is used as a filter. You can use this procedure in your own scripts and it will continue generate signals according to your rules.
Indicador Pine Script®
por capissimo
2
Wavetrend in Dynamic Zones with Kumo Implied VolatilityI was asked to do one of those, so here we go... As always free and open source as it should be. Do not pay for such indicators! A WaveTrend Indicator or also widely known as "Market Cipher" is an Indicator that is based on Moving Averages, therefore its an "lagging indicator". Lagging indicators are best used in combination with leading indicators. In this script the "leading indicator" component are Daily, Weekly or Monthly Pivots . These Pivots can be used as dynamic Support and Resistance , Stoploss, Take Profit etc. This indicator combination is best used in larger timeframes. For lower timeframes you might need to change settings to your liking. The general Wavetrend settings are the same that are used in Market Cipher, Market Liberator and such popular indicators. What are these circles? -These are the WaveTrend Divergences. Red for Regular-Bearish. Orange for Hidden-Bearish. Green for Regular-Bullish. Aqua for Hidden-Bullish. What are these white, orange and aqua triangles? -These are the WaveTrend Pivots. A Pivot counter was added. Every time a pivot is lower than the previous one, an orange triangle is printed, every time a pivot is higher than the previous one an aqua triangle is printed. That mimics a very common way Wavetrend is being used for trading when using those other paid Wavetrend indicators. What are these Orange and Aqua Zones? -These are Dynamic Zones based on the indicator itself, they offer more information than static zones. Of course static lines are also included and can be adjusted. What are the lines between the waves? -This is a Kumo Cloud Implied Volatility indicator. It is color coded and can be used to indicate if a major market move/bottom/top happened. What are those numbers on the right? -The first number is a Bollinger Band indicator that shows if said Bollinger Band is in a state of Oversold/Overbought, the second number is the actual Bollinger Band Width that indicates if the Bollinger Band squeezes, normally that happens right before the market makes an explosive move. Please keep in mind that this indicator is a tool and not a strategy, do not blindly trade signals, do your own research first! Use this indicator in conjunction with other indicators to get multiple confirmations.
Indicador Pine Script®
por AdonisWerther
21
Generalized Bollinger Bands %B And Bandwidth (Tartigradia)Bollinger Band is simply a representation of the rolling average of price and its standard deviation around the average (called the "basis"). This indicator generalizes the Bollinger Band by implementing many different equations to calculate the Bollinger Bands beyond the standard deviation and sma, and then plot the %B (where the current price falls inside the Bollinger Band), Bandwidth (size of the Bollinger Band) as well as the Bollinger Band itself and a reproduction of the OHLC price candles in a separate pane. Whereas other Bollinger Bands indicators often just change the basis but not the stdev calculation, the correct way to change the basis is to also change it inside the stdev calculation. Advanced features such as temporal discounting (ie, newer bars can have more weights), median absolute deviation and multiple sigma bands (eg, 3-sigma) are available. Up to 3 different Bollinger Bands can be displayed, and the background can be highlighted when price is overbought/oversold (beyond the Bollinger Band of choice). Tip: BB3, which is the bollinger band with standard deviation of 3, which represents 99% of observed values in the lookback period, is a good choice to highlight overbought/oversold conditions. Three "Sentiment Bars" are provided to see at a glance the sentiments on the price action relative to the Bollinger Bands as reflected by the %B value. Usage: Use the %B as a measure of sentiment: bullish if > 0.5, bearish if < 0.5. You can use the Sentiment Bars at the bottom for a quick reference: aqua if bullish, red if bearish, gray if undefined (too close to the middle line). Use the bandwidth as a measure of volatility: higher is more volatile, lower is less. When overbought, it can be a good time to sell/short. Use a higher Bollinger Band Multiplier such as 3 or more to reduce false positives. When oversold, it can be a good time to buy/long. Use a higher Bollinger Band Multiplier such as 3 or more to reduce false positives. Consider setting a much tighter lookback period of 4 as recommended in backtested works (en.wikipedia.org), use zlma instead of sma, and finally set a higher timeframe for the Bollinger Bands than the one you are currently studying. Then, the Bollinger Bands can help in detecting overbought and oversold regions (price going "out of bands"). Note that I tried to automate the setting of a higher timeframe, but for some reason the output is different when I manually do it using request.security() than when it's in indicator(timeframe=""). If someone has any suggestion as to why it happens, please let me know! (You can try it for yourself by uncommenting the auto_timeframe parameter line).
Indicador Pine Script®
por tartigradia
2
Bollinger Bands Width and Bollinger Bands %BThis script shows both the Bollinger Band Width(BBW) and %B on the same indicator window. Both the BBW and %B are introduced by John Bollinger(creator of Bollinger Bands) in 2010. Default Parameter values: Length = 20, Source = Close, Mult = 2 Bollinger Bands Width (BBW): Color = (Default: Green ) - I consider stocks with "BBW >= 4" are at a volatile state and ready for price contraction, but this depends on the parameter values of your choice. Bollinger Bands %B (%B): Color = (Default: Blue ) 1. %B Above 10 = Price is Above the Upper Band 2. %B Equal to 10 = Price is at the Upper Band 3. %B Above 5 = Price is Above the Middle Line 4. %B Below 5 = Price is Below the Middle Line 5. %B Equal to 0 = Price is at the Lower Band 6. %B Below 0 = Price is Below the Lower Band
Indicador Pine Script®
por polarbearking
Bollinger Bands Breakout Oscillator [LuxAlgo]The Bollinger Bands Breakout Oscillator is an oscillator returning two series quantifying the significance of breakouts between the price and the extremities of the Bollinger Bands indicator. Settings Length: Period of the Bollinger Bands indicator Mult: Controls the width of the Bollinger Bands Src: Input source of the indicator Usage Each series is calculated by summing the distance between price and a respective Bollinger Bands extremity in the case price is outside this extremity and divided by the sum of the absolute distance between price and a respective extremity. This sum is done over the most recent Length bars. Bullish breakouts are represented by the green areas of the indicator, while bearish breakouts are represented by the red areas of the indicator. The oscillator can determine the presence of an uptrend when the bullish area is superior to the bearish area, while a downtrend is indicated by a bearish area being superior to the bullish one. The significance of the breakout is determined by the amplitude of each area, with higher amplitudes indicating more significant breakouts or strong trends. Using higher Mult values would naturally return wider bands, which would induce less frequent breakouts, this would be highlighted by the oscillator. In the chart above we can see the oscillator using a multiplicative factor of 2.
Indicador Pine Script®
por LuxAlgo
24
Keltner Channel Width Oscillator (KingThies)Definition The Keltner Channel Width oscillator is a technical analysis indicator derived originally from the same relationship the Bollinger Band Width indicator takes on Bollinger Bands. Similar to the Bollinger Bands, Kelts measure volatility in relation to price, and factor in various range calculations to create three bands around the price of a given stock or digital asset. The Middle Line is typically a 20 Day Exponential Moving Average while the upper and lower bands highlight price at different range variations around its basis. Keltner Channel Width serve as a way to quantitatively measure the width between the Upper and Lower Bands and identify opportunities for entires and exits, based on the relative range price is experiencing that day. Calculation Kelt Channel Width = (Upper Band - Lower Band) / Middle Band More on Keltner Channels Keltner channel was first described by a Chicago grain trader called Chester W. Keltner in his 1960 book How to Make Money in Commodities. Though Keltner claimed no ownership of the original idea and simply called it the ten-day moving average trading rule, his name was applied by those who heard of this concept through his books. Similarly to the Bollinger Bands, Keltner channel is a technical analysis tool based on three parallel lines. In fact, the Keltner indicator consists of a central moving average in addition to channel lines spread above and below it. The central line represents a 10-day simple moving average of what Chester W. Keltner called typical price. The typical price is defined as the average of the high, low and close. The distance between the central line and the upper, or lower line, is equivalent to the simple moving average of the preceding 10 days' trading ranges. One way to interpret the Keltner Channel would be to consider the price breakouts outside of the channel. A trader would track price movement and consider any close above the upper line as a strong buy signal. Equivalently, any close below the lower line would be considered a strong sell signal. The trader would follow the trend emphasized by the indicator while complementing his analysis with the use of other indicators as well. However, the breakout method only works well when the market moves from a range-bound setting to an established trend. In a trend-less configuration, the Keltner Channel is better used as an overbought/oversold indicator. Thus, as the price breaks out below the lower band, a trader waits for the next close inside the Keltner Channel and considers this price behavior as an oversold situation indicating a potential buy signal. Similarly, as the price breaks out above the upper band, the trader waits for the next close inside the Keltner Channel and considers this price action as an overbought situation indicating a potential sell signal. By waiting for the price to close within the Channel, the trader avoids getting caught in a real upside or downside breakout.
Indicador Pine Script®
por kingthies
1
Bollinger Band Width Percentile - Multi Time FrameMy plan with this indicator was when trading at short timeframes, to modify my expectations on the potential impact of short term volatility based on volatility in longer timeframes, and when trading on longer timeframes to attempt to find an optimal entry point based on shorter term volatility. The BBWP is calculated for a short, medium and long timeframe, alerts are triggered at extremities with the ability to filter by moving averages and chart movement. The alerts also trigger a plot to the "Backtest Signal" which can be used to trigger trades in a backtester. Please see the discussions of how I'm using this indicator in the comments below. Thanks to The_Caretaker for "Bollinger Band Width Percentile" upon which this multi time frame version is based.
Indicador Pine Script®
por EltAlt
11
Simple Bollinger Band Width PercentileI'm a big fan of The_Caretaker's BBWP and wanted to add it as a volatility indicator to some of my scripts, but since it is over 100 lines of code (plus spacing and comments) I wanted to find if there was a simpler way to get comparable results. SBBWP uses Pine 5 built in functions that I don't believe were available when The_Caretaker wrote BBPW. The main limitations compared to The_Caretaker's version is that it can only use SMA as its Basis Type and the colors are also not as pretty. I have not included alerts or scale lines since I'm not trying to replace BBWP, just give a simple example that you can easily build in to your scripts. Full credit and respect to The_Caretaker!
Indicador Pine Script®
por EltAlt
1
Triple ThreatThis indicator provides buy and sell signals for Bitcoin based on confluence from well-known momentum, volatility, and trend indicators. It has successfully captured the major directional trends on Bitcoin's daily chart since 2018, and the settings are currently optimized for this chart in particular. This indicator implements RSI to gauge momentum, BBWP to gauge volatility, and an EMA to gauge trend. Maximum confluence signals are represented by horizontal bars in the indicator's pane, where the tallest green bar is a confirmed buy signal, and the tallest red bar is a confirmed sell signal. The shortest bar represents a momentum-only signal, and the second-shortest bar represents a volatility signal in confluence with the previously given momentum signal. To track momentum, the RSI is plotted to the indicator plane against a moving average of the RSI. A momentum signal is generated when the RSI crosses over its moving average, retests/approaches the moving average, and then continues in the crossover direction (i.e., it fails to cross the moving average to the opposite side, creating a successful retest). The settings that affect this trigger are the "Crossover Threshold," which specifies how much the RSI should exceed the moving average to be considered a crossover, and the "Retest threshold," which specifies how closely the RSI should approach the moving average to be considered a retest. A momentum signal is ALSO generated if the RSI or its moving average exceed their counterpart by a certain threshold. For example, if the threshold was set at 10, a BUY signal would be generated when the RSI exceeds the moving average by 10, or a SELL signal would be generated when the moving average exceeds the RSI by 10. This threshold can be set using the "Instant Signal Threshold" setting. Either type of momentum signal will be plotted on the pane as the shortest horizontal bar, with its color indicating the signal's direction. Volatility is primarily measured using the Bollinger Band Width Percentile (BBWP) indicator, which was created by The_Caretaker. BBWP plots the volatility of the asset's price, given by Bollinger Band width, relative to past volatility by assigning the volatility readings into percentiles. The indicator also includes a moving average of the BBWP itself, where a crossover to the upside represents expanding volatility and a crossover to the downside represents contracting volatility. This indicator is used to confirm a signal given by the momentum indicators - a momentum signal that is given during a period of expanding volatility has a greater likelihood of success. Therefore, when the BBWP crosses above its moving average by a given threshold, a previously triggered momentum signal is considered to be "confirmed." The threshold for this crossover can be set using the "BBWP Confirmation Threshold" setting. However, it is also relevant that periods of extreme volatility often accompany an extremity in price action (a "top" or "bottom"), in which case the BBWP is likely to contract after price reaches such an extremity. This phenomenon is captured by also using "extreme reads" on the momentum indicator to signal that there has already been enough volatility to confirm a momentum signal. If the RSI gives an "extreme read" before triggering a signal, the momentum signal is also considered to be confirmed. For example, if the RSI is above 80, breaks below 80, and then gives a SELL signal, this sell signal is considered to be confirmed without requiring the BBWP to crossover its moving average to the upside. The threshold that would confirm a SELL signal can be set with the "Overbought" setting, and the threshold that would confirm a BUY signal can be set with the "Oversold" setting. Whenever a volatility signal confirms a momentum signal, a medium-sized horizontal bar will be plotted on the pane in the same directional color as the momentum signal. Note that a momentum signal may trigger at the exact same time as the volatility signal which confirms it; in this case, only the medium-sized bar will be visible on the pane, but its direction can still be identified by its color. Lastly, to reduce the likelihood of "false signals," a trend indicator is used to confirm the direction of the signal. This is typically an exponential moving average. If a confirmed volatility SELL signal is given, and the closing price is below the moving average, then the SELL signal is also confirmed by the trend. Likewise, if a confirmed volatility BUY signal is given, and the closing price is above the moving average, then the BUY signal is confirmed by the trend. The type and length of the moving average used to verify the trend can be set using the "Moving Average Type" and "Moving Average Length" settings found below the momentum/volatility settings. A trend signal is plotted on the pane as a tall horizontal bar, and is more deeply colored than the momentum and volatility signals. For maximum confluence, it is recommended that the trend signal, given by the tallest bar, is the one that forms the basis of trades executed while using the Triple Threat indicator. It is possible to enter more aggressive trades with better entries by using only the volatility signal, given by the medium-sized bar, however this entails greater risk and should only be done in confluence with an additional trading strategy of your own discretion. Backtesting has shown that using the volatility signal alone underperforms using the volatility signal in confluence with the trend signal. Please also be advised that the default setting are optimized for Bitcoin's daily chart only. The indicator is still applicable to other timeframes and asset classes, but the settings may need to be modified. I have a list of settings for other Bitcoin timeframes, and I would be happy to share them upon request. I hope you can find this indicator to be of some use to your trading strategies. I'd be happy to hear any feedback from the community, so please don't hesitate to reach out. Stay safe, and happy trading.
Estratégia Pine Script®
por alexjnelson
6
K's Volatility BandsVolatility bands come in all shapes and forms contrary to what is believed. Bollinger bands remain the principal indicator in the volatility bands family. K's Volatility bands is an attempt at optimizing the original bands. Below is the method of calculation: * We must first start by calculating a rolling measure based on the average between the highest high and the lowest low in the last specified lookback window. This will give us a type of moving average that tracks the market price. The specificity here is that when the market does not make higher highs nor lower lows, the line will be flat. A flat line can also be thought of as a magnet of the price as the ranging property could hint to a further sideways movement. * The K’s volatility bands assume the worst with volatility and thus will take the maximum volatility for a given lookback period. Unlike the Bollinger bands which will take the latest volatility calculation every single step of time, K’s volatility bands will suppose that we must be protected by the maximum of volatility for that period which will give us from time to time stable support and resistance levels. Therefore, the difference between the Bollinger bands and K's volatility bands are as follows: * Bollinger Bands' formula calculates a simple moving average on the closing prices while K's volatility bands' formula calculates the average of the highest highs and the lowest lows. * Bollinger Bands' formula calculates a simple standard deviation on the closing prices while K's volatility bands' formula calculates the highest standard deviation for the lookback period. Applying the bands is similar to applying any other volatility bands. We can list the typical strategies below: * The range play strategy : This is the usual reversal strategy where we buy whenever the price hits the lower band and sell short whenever it hits the upper band. * The band re-entry strategy : This strategy awaits the confirmation that the price has recognized the band and has shaped a reaction around it and has reintegrated the whole envelope. It may be slightly lagging in nature but it may filter out bad trades. * Following the trend strategy : This is a controversial strategy that is the opposite of the first one. It assumes that whenever the upper band is surpassed, a buy signal is generated and whenever the lower band is broken, a sell signal is generated. * Combination with other indicators : The bands can be combined with other technical indicators such as the RSI in order to have more confirmation. This is however no guarantee that the signals will improve in quality. * Specific strategy on K’s volatility bands : This one is similar to the first range play strategy but it adds the extra filter where the trade has a higher conviction if the median line is flat. The reason for this is that a flat line means that no higher highs nor lower lows have been made and therefore, we may be in a sideways market which is a fertile ground for mean-reversion strategies.
Indicador Pine Script®
por Sofien-Kaabar
ViVen-Multi Time Frame Bollinger Band StrategyThis indicator created to identify the strong Support and Resistance levels based on the Bollinger Bands. When two different time frame Bollinger Bands are travelling together then its a strong Support or Resistance Levels. I have added 5 Min, 15 Min, 30 Min, 1 Hr and 1 Day time frame Bollinger Bands in one Chart. You can select and combine whichever the TF you want. Default values considered - Period - 20 and Std.Dev is 2 You can on/off the indicator based on the requirement. Trade plan: BUY - When price comes near to the Bottom Bollinger Band level (look for candle confirmation is plus). If multiple Bollinger bands travels together then is Strong Support. (Exit if Price Breaks down the BB) SELL - When price reaches the Upper Bollinger Band level (look for candle confirmation is plus). If multiple Bollinger bands travels together then is Strong Support. (Exit if Price Breaks Up the BB) Middle Line - is the 20 SMA line When the Gap between Upper and Lower Band is narrow then we can expect a trending movement soon.
Indicador Pine Script®
por vijiviven
3