K2 - Quarterly Theory Daily SSMTThe K2 indicator was designed to clearly identify the primary price levels (“PPLs”) associated with the daily cycle sequential smart money technique (“DSSMT) which is a core concept of Quarterly Theory (“QT”). K2 is meant to be used primarily with the 15 minute timeframe. QT was originally created by Traderdaye. Traderdaye was inspired by the Inner Circle Trader. The DSSMT PPLs identified by the K2 indicator are as follows:
Q1 low (grey line)
Q1 high (grey line)
Q1 equilibrium (dashed grey line)
Q2 low (pink line)
Q2 high (pink line)
Q2 equilibrium (dashed pink line)
Q3 low (light green line)
Q3 high (light green line)
Q3 equilibrium (dashed light green line)
Q4 low (light blue line)
Q4 high (light blue line)
Q4 equilibrium (dashed light blue line)
A DSSMT is formed when the price of one asset takes a low or high while another asset that is normally correlated with the first asset fails to take the same low or high. DSSMT is used with other QT core concepts such as precision swing point (“PSP”) and terminus price divergence (“TPD”) by QT traders to refine and execute trade setups. TPD is a concept originally created by Jacob Speculates. Equilibrium of a daily cycle may also be used to identify DSSMT. However, the trader who developed this indicator is not sure that this concept has been publicly taught or endorsed in any way by Traderdaye or Jacob Speculates.
Indicadores e estratégias
ADX Z-Score OscillatorTitle: ADX Z-Score Oscillator
Description:
The ADX Z-Score Oscillator is a normalized version of the traditional Average Directional Index (ADX), designed to oscillate between fixed bounds for easier interpretation of trend strength. Instead of plotting the raw ADX line, this indicator calculates the Z-Score of the ADX relative to its recent average and standard deviation, allowing for consistent comparison over time and across different assets.
The Z-Score oscillates between fixed horizontal levels of +2 and -2, highlighting extreme values.
The orange line represents the current Z-Score of the ADX.
Horizontal reference lines at +2 (red), 0 (gray), and -2 (green) help define overbought/oversold or strong/weak trend zones.
A dynamic table on the chart shows the current Z-Score with color coding to indicate trend strength:
🔴 Z > 1.5 → Very strong trend
🟠 Z > 0.5 → Moderate trend
🔵 Z < -0.5 → Weakening or reversing trend
🟢 Z < -1.5 → Very weak trend or potential reversal zone
This transformation of the ADX into a bounded oscillator helps traders easily assess trend strength and changes in momentum without the ambiguity of varying ADX scale levels.
Bollinger Bands Z-ScoreBollinger Bands Z-Score Indicator
This indicator transforms the classic Bollinger Bands into a Z-Score oscillator displayed in a separate pane. It standardizes the Bollinger Bands’ basis line by calculating the Z-Score over a user-defined period, allowing you to see how many standard deviations the price deviates from the mean.
Upper and Lower Fixed Lines: These are set at +2 and -2 Z-Score levels, representing common thresholds for overbought and oversold conditions.
Z-Score Oscillator: The normalized Bollinger Bands oscillate smoothly between these fixed boundaries, providing a clearer perspective on volatility extremes.
Z-Score Table: Displayed on the right side, this table shows the current Z-Score value, along with fixed maximum (+2) and minimum (-2) limits, making it easy to track current momentum and volatility in real-time.
Use Cases:
Identify overextended price moves with standardized volatility measures.
Spot potential reversals or continuation setups by observing the Z-Score crossing key levels.
Complement traditional Bollinger Bands analysis with a statistically normalized perspective.
Input Parameters:
Length: The period used for Bollinger Bands and Z-Score calculation.
MA Type: Choose the moving average type for the basis line (SMA, EMA, SMMA, WMA, VWMA).
StdDev: Multiplier for the standard deviation bands.
Z-Score Length: The lookback period used to compute the mean and standard deviation for Z-Score normalization.
This indicator is perfect for traders seeking a statistically sound and visually clear representation of Bollinger Bands volatility and extremes.
Rolling VWAPs (7D / 30D / 90D / 365D) fixed bandsRolling VWAPs (7D / 30D / 90D / 365D) fixed bands
by Giano
OBV Z-Score + Table📘 OBV Z-Score — Indicator Description
Overview
This indicator converts the On-Balance Volume (OBV) into a Z-Score oscillator, providing a normalized statistical view of volume flow strength relative to its recent history.
How It Works
OBV Calculation
The On-Balance Volume accumulates volume based on price direction, showing whether volume is flowing into or out of an asset.
Z-Score Transformation
The OBV values are normalized via Z-Score:
ini
Kopieren
Bearbeiten
Z = (OBV - Mean) / Standard Deviation
This reveals how unusually strong or weak volume momentum is compared to recent norms.
Smoothing
An optional moving average smoothing (SMA, EMA, VWMA, etc.) can be applied for cleaner signals.
Z-Score Table
A live Z-Score value is displayed in a table on the top-right of the indicator pane, clamped between +2 and -2:
+2 indicates unusually high positive volume momentum
-2 indicates unusually high negative volume momentum
How to Use It
Bullish Signal: Z-Score crossing above +1.5 or +2 signals strong buying volume pressure
Bearish Signal: Z-Score crossing below -1.5 or -2 signals strong selling volume pressure
Combine with Price Action: Use alongside price trends or other Z-Score indicators to improve decision making in SDCA or volume-based trading systems
Simplified STH-MVRV + Z-ScoreSimplified Short Term Holder MVRV (STH-MVRV) + Z-Score Indicator
Description:
This indicator visualizes the Short Term Holder Market Value to Realized Value ratio (STH-MVRV) and its normalized Z-Score, providing insight into Bitcoin’s market cycle phases and potential overbought or oversold conditions.
How it works:
The STH-MVRV ratio compares the market value of coins held by short-term holders to their realized value, helping to identify periods of profit-taking or accumulation by these holders.
The indicator calculates three versions:
STH-MVRV (MVRV): Ratio of current MVRV to its 155-day SMA.
STH-MVRV (Price): Ratio of BTC price to its 155-day SMA.
STH-MVRV (AVG): Average of the above two ratios.
You can select which ratio to display via the input dropdown.
Threshold Lines:
Adjustable upper and lower threshold lines mark significant levels where market sentiment might shift.
The indicator also plots a baseline at 1.0 as a reference.
Z-Score Explanation:
The Z-Score is a normalized value scaled between -3 and +3, calculated relative to the chosen threshold levels.
When the ratio hits the upper threshold, the Z-Score approaches +2, indicating potential overbought conditions.
Conversely, reaching the lower threshold corresponds to a Z-Score near -2, signaling potential oversold conditions.
This Z-Score is shown in a clear table in the top right corner of the chart for easy monitoring.
Data Sources:
MVRV data is fetched from the BTC_MVRV dataset.
Price data is sourced from the BTC/USD index.
Usage:
Use this indicator to assess short-term holder market behavior and to help identify buying or selling opportunities based on extremes indicated by the Z-Score.
Combining this tool with other analysis can improve timing decisions in Bitcoin trading.
RSI Z-Score + TableHow It Works
RSI Calculation
The standard RSI is computed over a user-defined period (default: 14), measuring the strength of recent price movements.
Z-Score Transformation
The RSI is then normalized using the Z-Score formula:
ini
Kopieren
Bearbeiten
Z = (RSI - Mean) / Standard Deviation
This highlights whether RSI is unusually high or low compared to its historical behavior.
Smoothing
An optional EMA is applied to the Z-Score for smoother and more reliable signals (default: 10-period smoothing).
Z-Score Table
A real-time value of the RSI Z-Score is displayed in a table in the top-right of the indicator pane.
The value is clamped between +2 and -2
+2 aligns with strong overbought RSI conditions
-2 aligns with strong oversold RSI conditions
How to Use It
Buy Signal Potential: When the Z-Score drops below -1.5 or -2 → statistically oversold RSI
Sell Signal Potential: When the Z-Score rises above +1.5 or +2 → statistically overbought RSI
Use in Confluence: Combine with price action, trend filters, or other Z-Score indicators (e.g. OBV, VWAP, VIX) for SDCA or mean-reversion strategies
AQPRO ScalperX📝 INTRODUCTION
AQPRO ScalperX is a trading indicator designed for fast-paced, intraday trading. It uses Donchian channel breakouts, combined with a proprietary filtering system, to catch buy and sell opportunities as close to the beginning as possible without losing quality of the signals.
On top of core signals, ScalperX includes a real-time max profit tracker, a multi-timeframe (MTF) dashboard, support and resistance zones, and risk management visualization tools like automatic rendering of TP and SL lines. The indicator is fully customizable for both its visuals and functional settings.
🎯 PURPOSE OF USAGE
This indicator was initially designed with the idea of trying to make such a tool, that would be able to catch trend reversal in the most safe way. In this particular situation term 'safe way' is very abstract and it is up to interpretation, but we decided that our definition will be 'trading with price breakouts' , meaning that we would like to capitalize on price breaking its previous structure in the direction opposite to the previous one.
You can clearly see on the chart how buy and sell signals are going one after another on the screenshot below:
This ensures that we follow trend consistently and without missing out on potential profits. Just like they say: " let the winners run ".
Even though indicator with similar goals already exist in the open market, we believe that our proprietary algorithms and filters for determining price breakouts can make a big difference to traders, which employ similar strategies on daily basis, by helping them understand where are the potential high-quality breakouts might be. We haven't found indicator with exact same functionality as ours, which means that traders will be able to leverage an actually new tool to generate new price insights.
In short, main goals of this indicator are as follows:
Catching high-quality price breakouts, filtered to reduce the amount of choppy moves and false signals;
Tracking potential profits in real-time, directly on trader's chart;
Organizing data visualization of data pf latest signals from chosen asset from multiple timeframe in one dashboard;
Automated highlighting of key support and resistance zones on the chart, which serve as confirmation for main signals;
⚙️ SETTINGS OVERVIEW
Options for customization of this indicator are straightforward, but let's review them to make things certainly clear:
🔑 ScalperX / Main Settings
Range — defines the "wideness" of the breakout boxes. Higher values create wider breakout zones and impact breakout sensitivity;
Filter — adjusts the spacing between breakout boxes, determining the strictness of signal filtering. Higher values lead to more selective and rarer signals;
Show Max Profit — displays a real-time line and label that updates when a trade achieves a new peak profit, measured in ticks.
⏰ MTF Signal / Main Settings
Show MTF Signals — enables the generation of buy/sell signals from selected higher timeframes, displayed as labels on the current chart;
Timeframe — specifies the higher timeframe to use for MTF signal detection, such as 1 hour (1h) or 4 hours (4h).
🗂️ MTF Dashboard / Main Settings
Show MTF Dashboard — activates a dashboard that tracks entries, TP, SL, and overall trade bias for one selected symbol across four customizable timeframes;
* Dashboard position ( Vertical ) — adjusts whether the dashboard appears on the Top, Middle, or Bottom of the chart;
* Dashboard position ( Horizontal ) — aligns the dashboard Left, Center, or Right within the chart window;
* the name of the parameter is hidden in the settings
🗂️ MTF Dashboard / Ticker
Ticker to Track — Allows you to choose the specific ticker symbol (e.g., BINANCE:BTCUSDT) for MTF tracking.
🗂️ MTF Dashboard / Timeframes
* Timeframe 1 — set the first timeframe for multi-timeframe analysis (e.g., 15 minutes);
* Timeframe 2 — set the second timeframe for multi-timeframe analysis (e.g., 30 minutes);
* Timeframe 3 — set the third timeframe for multi-timeframe analysis (e.g., 1 hour);
* Timeframe 4 — set the fourth timeframe for multi-timeframe analysis (e.g., 4 hours).
* the name of the parameter is hidden in the settings
🛡️ Risk Management / Main Settings
Show TP&SL — displays dynamic lines and labels for the entry, Take Profit (TP), and Stop Loss (SL) of the most recent signal, updated in real-time until a new signal triggers;
Risk-to-Reward Ratio (R:R) — defines the ratio for TP and SL calculation to control your risk and reward on every trade.
📐 Support & Resistance / Main Settings
Show Support & Resistance Zones — enables dynamic zones based on pivot points, colored bullish or bearish based on price context;
History Lookback — defines the number of bars to consider when calculating support and resistance levels. Increasing this results in zones derived from longer-term price structures.
🎨 Visual Settings / ScalperX
Bullish Box — defines the color for bullish breakout boxes;
Bearish Box — defines the color for bearish breakout boxes;
Max Profit — sets the color for the max profit line on the chart.
🎨 Visual Settings / S&R
Support — defines color used for standard support zones;
Resistance — defines color used for standard resistance zones;
Strong Support — defines special color for zones classified as "strong support";
Strong Resistance — defines special color for zones classified as "strong resistance".
🎨 Visual Settings / MTF Dashboard
Bullish — sets the color for bullish trade states in the MTF dashboard;
Bearish — sets the color for bearish trade states in the MTF dashboard.
🔔 Alerts / Main Settings
Buy & Sell — toggles alerts for buy and sell signals detected by the indicator in the current chart timeframe;
MTF Buy & Sell — toggles alerts for buy and sell signals detected across the selected MTF timeframes.
📈 APPLICATION GUIDE
Application flow of this indicator very easy to understand and get used to, because all of the necessary elements — analysis, drawing, alert — are already automated by our algorithms. Let's review how the indicator works.
Let's start with the most basic thing — how will your indicator look when you load it on your chart for the first time:
AQPRO ScalperX consists mainly of 6 logic blocks:
ScalperX signals;
Risk visualization;
Max Profit tracking;
MTF scalper signals;
MTF dashboard;
Support & Resistance zones.
Description of each logic block is provided in the corresponding sections below.
SCALPERX SIGNALS
Signals, generated by our indicator, are shown on the chart as coloured up/down triangle. When a signal appears on the chart, indicator also create a box of length equal to 'Range' parameter from "Main Settings" group of settings. This box is intended to show which area of the price was broken by current candle.
It also important to acknowledge, the breakout itself happens only when price closes beyond broken price area with its close (!) price . Breakouts with highs or lows are not counted. This reduces the amount of low-quality signals and ensures that only the strong breakout will appear on the chart.
VERY IMPORTANT NOTE: all signals are considered valid only on the close of the candle, which triggered the signal, so if you want to enter a trade by any signal, wait for its candle to close and open your trade right on the next candle.
Talking about scalper's settings, we need to shed a light on how the changes in them affect signal's quality.
Parameter 'Range' defines the amount of bars, that will be review prior to current candle to determine wether the price area of this bars is good enough to track and if current candle actually broke this price area.
👍 Rule of thumb : the higher the 'Range' is, the "wider" the boxes. Also the with the increase of this parameter rises the lag of the signals, so be carefully with setting high values to this parameter.
See the visual showcase of signals with different 'Range' parameters on the screenshot below:
The example above features two instancies of ScalperX with two different 'Range' parameter values: 15 (leftchart) and 5 (right chart). You can clearly see, that on left chart here are 2 signals in comparison to 6 signals on right chart. Also signals on the left side have bigger lag and they don't catch the start of the move in comparison to how quickly tops and bottoms are catched with low 'Range' . However, low 'Range' will lead to excessive amount of signals, quality of which during 'whipsaw' markets is not that great.
✉️ Our advice on how to optimally set 'Range' parameter:
Use low values to trade during the times, when there are a lot of clean up and down impulses. This way you will catch reversal opportunities sooner and the quality of the signals will still be great;
Use high values on the 'whipsaw' markets. This will filter out many bad signals, that you would get with low-value 'Range' , and will drastically reduces amount of losing trades.
Talking about the 'Filter' parameter, this particular setting defines the 'strictness' of rules which will be applied to price area validation process. Essentially, the higher this parameter is, the stronger price impulse has to be confirm the breakout. However, changes in this parameter will not impact the "wideness" of boxes at all.
👍 Rule of thumb : the higher the 'Filter' is, the more separated the signal will be. Setting this parameter to high value will lead to increase in lag and big reduction in amount of signals, so be careful this parameter to high values.
See the visual showcase of signals with different 'Filter' parameters on the screenshot below:
The example above features two instancies of ScalperX with two different 'Filter' parameter values: 20 (left chart) and 2.5 (right chart). You can clear see, that low 'Filter' generated 6 signals, while higher one generated only 4 signals. However if you look closer, you will see that 2 signals, that existing in the yellow dashed area on the right chart, don't exist in the same area on the left chart. This is because high value of this parameter requires price impulse to be very strong in order for the indicator to mark this breakout as a valid one. What is more important is that these 2 'missing' signals were actually bad and, technically, we actually cut our losses in this case with high value of 'Filter' . You can see that the leftmost sell signal on the left chart eventually closed in a nice profit, in comparison to the same trade being closed in a loss on the right chart because of the 2 signals that we were talking about above.
It is important to note, that setting 'Filter' to low values will not affect performance this much as it low value of 'Range' do, because the indicator already works on low values of this parameter by default and the signals on average are already good enough for trading.
✉️ Our advice on how to optimally set 'Filter' parameter:
Use low values to trade on the markets with clean up and down impulses. This way you avoid excessive filtering and leave a room for good signals to come right at you;
Use high values to trade on 'whipsaw' markets. Higher values of this parameter on these markets have same effect as high 'Range' parameter: filtering false signals and leaving room for actually strong price impulses, which you will later capitalize on.
RISK VISUALIZATION (TP&SL)
Rendering Take-Profits and Stop-Losses in our indicator works quite simple: for each new trade indicator creates new pairs of lines and labels for TP and SL, while lines & labels from previous trade are erased for aesthetics purposes. Each label shows price coordinates, so that each trader would be able to grap the numbers in seconds.
See the visual showcase of TP & SL visualization on the screenshot below:
Also, whenever TP or SL of the current trade is reached, drawing of both TP and SL stops. When the TP is reached, additional '✅' emoji on the TP price is shown as confirmation of Take-Profit.
However, while TP or SL has not been reached, TP&SL labels and lines will be prolonged until one of them will be reached or new signals will come.
See the visual showcase of TP & SL stopping being visualized & TP on the screenshot below:
MAX PROFIT TRACKING
This mechanic is not particularly a new one in field of trading, but people usually forgot that it can be a useful indicator of state of the market:
when lines and labels of Max Profit are far from entry points on consistent basis , it usually means that indicator's signals actually can catch a beginning of good price moves, which enables trader to capitalize on them;
when lines and labels of Max Profit are close to entry points on consistent basis , it means that either market is choppy or the indicator can't catch trading opportunities in time. To 'fix' this you can try to reconfigure scalper's parameters, which were described above.
Principles of Max Profit in this indicator are of industry-standard: when price updates its extremum and 'generates' more profit than it previously did, Max Profit label and line change their position to this extremum. Max Profit label displays the maximum potential amount of profit that a trader could have got during this trade in pips (!) .
See the visual showcase of Max Profit work on the screenshot below:
MTF SCALPER SIGNALS
The principles of these signals are exactly the same as principles for classic Scalper signals. Refer to 'Scalper Signals' section above to rehearse the knowledge.
Logic behind these signals is very simple:
We take classic Scalper signals;
We request the data about these latest signals from specific other timeframe ( user can choose it in the settings );
If such signals appeared, we display it on the chart as a big label with timeframe value inside of it. In comparison to classic signals, no additional boxes are created . TP&SL functionality doesn't cover MTF signals, so don't expect to see TP&SL lines and labels for MTF signals.
See the visual showcase of MTF Scalper signals on the screenshot below:
MTF DASHBOARD
The functionality of the dashboard is pretty simple, but it makes the dashboard itself a very powerful tool in a hands of experienced trader.
Let's review structure of MTF dashboard on the screenshot below:
The important feature of MTF dashboard is that its tracks latest trade's data from a particular ticker and its four timeframes, all of which any trader chooses in the settings. This means, that you can be on asset ABC , but track the data from asset XYZ . This allows for a quick scan of sentiment from different assets and their timeframes, which gives traders a clue on what is the trend on these assets both on lower and higher timeframes at the same moment and saves a lot of time from jumping from one asset & timeframe to another.
To see that this is exactly the case with our indicator, see the screenshot below:
Needless to say, that you can track current asset in the dashboard as well. This will have the same benefits, described in the paragraph above.
You can also customize colours for bullish and bearish patterns for MTF Dashboard in the settings.
SUPPORT & RESISTANCE ZONES
Support & resistance (S&R) zones are a great tool for confirming Scalper signals in complex situations. Using these zones to determine whether or a particular entry opportunity is good is a practice of professional traders, which we specifically added to our indicator for the reason of improving the quality of Scalper signals in long run.
The mechanics behind these zones is based on pivot points, the lookback for which you can customize in the parameter called 'History Lookback (Bars)' in "Support & Resistance / Main Settings" group of settings. Increasing this parameter will lead to a appearance of more 'global' zones, but they will appear much rarer, rather then zones, generated with low values of this parameter.
The quality of these zones doesn't change much when changing this parameter — it only changes the frequency of the zones on the chart. Zones, generated from high values of this parameter are more suitable for long-term trading, while zones, generated from low value of this parameter, are more suitable for short-term trading.
It also important to mention that any zone on the chart is considered active only until the moment its farther border ( top border for resistance zones and bottom border for support zones) is reached by price's high or low .
Take a look on the screenshot below to see which zones does the indicator draw:
Let's review the zones themselves now:
Classic Support/Resistance Zone — a standard zone, which on average has amedium success rate to reverse the price when collided with it;
High-buyer-volume/High-seller-volume Support/Resistance Zone — a stronger zone, which on average has much better success rate to reverse the price when collided with it. Classic zone is marked as high-volume only if the up/down volume near the pivot point of this zone is greater than a certain threshold ( not changeable );
Extreme Support/Resistance Zone — a zone, which appeared beyond price's least-possible-to-cross levels, and has to the highest success rate of reversing the price on encounter across the zones, mentioned previously. Classic zone, which appeared beyond certain price levels, calculated with our proprietary risk system, is considered extreme. Classic zone doesn't need to be high-volume to become an Extreme Zone!
High-buyer-volume/High-seller-volume Extreme Support/Resistance Zone — an Extreme Zone, which has also passed up/down volume evolution process, mentioned in the point 2 .
Trading with the zones, mentioned above, with highest-on-paper success rate — especially Extreme Zones — does NOT guarantee you a price reversal when the price will reach this zone. However, by conducting our own extensive research with this indicator, we have found that using these zone will actually help you increase your success rate on average, because using these zones as confirmation systems filter out quite a number of false signals on average.
It is also important to mention, that opacity (same as 'transparency') of S&R zones depends on the volume of around zone's pivot point:
if volume is high , zone has 'brighter' (less opacity) colour;
if volume is low , zone has 'darker' (more opacity) colour.
Let's review examples of Scalper signal, which 1) where filtered out by our S&R zones and 2) where confirmed by our S&R zones. See the screenshot below:
The example above clearly shows the importance of having an S&R zone confirming the signal. This kind of 'team work' between of Scalper signals and S&R zones results in filtering lots of bad signals and confirmation of truly strong ones.
🔔 ALERTS
This indicator employs alerts for an event when new signal occurs on the current timeframe or on MTF timeframe. While creating the alert below 'Condition' field choose 'any alert() function call'.
When this alert is triggered, it will generate this kind of message:
// Alerts for current timeframe
string msg_template = "EXCHANGE:ASSET, TIMEFRAME: BUY_OR_SELL"
string msg_example = "BINANCE:BTCUSDT, 15m: Buy"
// Alerts for MTF timeframe
string msg_template_mtf = "MTF / EXCHANGE:ASSET, TIMEFRAME: BUY_OR_SELL"
string msg_example_mtf = "MTF / BINANCE:BTCUSDT, 1h: Buy"
📌 NOTES
This indicators works best on assets with high liquidity; most suitable timeframes range from 1m to 4h (depends on your trading style) ;
Seriously consider using S&R zones as confirmation to main Scalper signals or any of your own signals. Confirmation process may filter out a lot of signals, but your PNL History will say "thank you" to you in the long-run and you will see yourself how good confirmed signals actually do work;
Don't forget to look at MTF dashboard from time to time to see global sentiment. This will help you time your entry moments better and will improve your performance in the long run;
This indicator can serve both as primary source of signals and as confirmation tool, but we advise to try to combine it with your own strategy frst to see if it will improve your performance.
🏁 AFTERWORD
AQPRO ScalperX was designed to help traders identify high-quality price breakouts and generate market insights based on them, which include signal generation. Main feature of this indicator is Scalper algorithm, which generate price-breakout-based signals directly on your chart.
Alongside these signals you can leverage 1) MTF Dashboard to track latest trade's data from chosen asset and its four timeframes, 2) risk visualization functionality (TP&SL) to improve understanding of current market risks and 3) Support & Resistance zones, which serve as a great confirmation tool for Scalper signals, but can also work with any other signal generation tool to enhance its performance.
ℹ️ If you have questions about this or any other our indicator, please leave it in the comments.
ATGRIDBOT OPTIMIZER Hello Trader..
There are some option in the script, let see one by one:
Market Direction: To specify the direction of the position: Long only, Short only, and Neutral
Contrat (Lot) Number: It specifies the size of the position to be opened when the trend reverses (position changes).
Test by backward bar count: If selected, it indicates how many backward bars will be taken into account in the back test process. If not selected, Start Date is taken into account.
Show Table: shows the results on the screen.
In this way, you will find the best parameter values according to the number of bars or date you entered.
Here the top 5 parameters are show along with total profit, profitable position, loss position and parameter values.
Remember that as the number of bars and dates in backtests increases, the calculation time will increase.
DISCLAIMER: No sharing, copying, reselling, modifying, or any other forms of use are authorized for our documents, script / strategy, and the information published with them. This informational planning script / strategy is strictly for individual use and educational purposes only. This is not financial or investment advice. Investments are always made at your own risk and are based on your personal judgement. I am not responsible for any losses you may incur. Please invest wisely.
VIX Z-Score (Inverted)📘 Indicator: VIX Z-Score (Inverted) + Table
🔍 Overview
This indicator calculates the Z-Score of the VIX (Volatility Index) and inverts it to identify potential buying opportunities during periods of fear and caution during periods of extreme optimism. The Z-Score is smoothed and visually displayed alongside a dynamic info table.
⚙️ How It Works
VIX Data: The VIX (ticker: CBOE:VIX) is pulled in real time.
Z-Score Calculation:
𝑍
=
(
𝑉
𝐼
𝑋
−
mean
)
standard deviation
Z=
standard deviation
(VIX−mean)
Over a customizable lookback period (default: 50).
Inversion:
Since high VIX usually means fear (often a contrarian buying signal), we invert the Z-Score:
𝑍
inv
=
−
𝑍
Z
inv
=−Z
Smoothing:
An EMA is applied to reduce noise and false signals.
Clamping:
The Z-Score is linearly scaled and capped between +2 and -2 for easy visualization in the info table.
📊 Z-Score Table (Top-Right)
Range Interpretation Table Color
+1.5 to +2 Extreme fear → Buy zone 🟩 Green
+0.5 to +1.5 Moderate fear 🟨 Lime
–0.5 to +0.5 Neutral ⬜ Gray
–0.5 to –1.5 Growing complacency 🟧 Orange
–1.5 to –2 Extreme optimism → Caution 🟥 Red
The current Z-Score (clamped version) is shown in real time on the right-hand info panel.
🧠 How to Use It
+2 Zone (Table: Green):
Market fear is at an extreme. Historically, such conditions are contrarian bullish—possible entry zones.
–2 Zone (Table: Red):
Indicates extreme optimism and low fear. Often a signal to be cautious or take profits.
Middle range (±0.5):
Market is neutral. Avoid major decisions based solely on sentiment here.
🧪 Best Practices
Combine with price action, volume, or trend filters.
Works well on daily or 4H timeframes.
Not a standalone signal—best used to confirm or fade sentiment extremes.
KI-Marktrichtung-Analyzer
KI Market-Direction Analyzer
A turnkey bias indicator that merges Trend, Structure, Volume and Momentum into one clear 0–100 score:
Trend (EMA 200):
Close > EMA200 → Uptrend (+1)
Structure Check:
Higher High & Higher Low vs. prior bar → Bullish structure (+1)
Volume Impulses:
BullVol (+1): Close > Open and Volume > prior bar
BearVol (–1): Close < Open and Volume > prior bar
Momentum (RSI 14):
RSI > 55 → +1 | RSI < 45 → –1 | otherwise 0
Score Calculation:Visual Bias Display:
Long Bias: Score > 60 → Green upward triangle + green background
Short Bias: Score < 40 → Red downward triangle + red background
Neutral: 40 ≤ Score ≤ 60 → Gray background
Optional Label:
Show “Bias Score: XX” on each bar for instant reference.
See market bias at a glance—Bullish, Bearish or Neutral!
SSRO Z-ScoreSSRO Z-Score Indicator — Description
What it does:
This indicator measures the Stablecoin Supply Ratio (SSR) relative to Bitcoin’s market cap and calculates a normalized Z-Score of this ratio to help identify potential market tops and bottoms in the crypto market.
How it works:
The Stablecoin Supply Ratio (SSR) is calculated by dividing Bitcoin’s market capitalization by the combined market capitalization of major stablecoins (USDT, USDC, TUSD, DAI, FRAX).
The SSR is then smoothed over a user-defined lookback period to reduce noise.
A Z-Score is computed by normalizing the SSR over a specified moving window, which shows how far the current SSR deviates from its historical average in terms of standard deviations.
This Z-Score is further smoothed using an exponential moving average (EMA) to filter short-term volatility.
How to read the Z-Score:
Z-Score = 0: SSR is at its historical average.
Z-Score > 0: SSR is above average, indicating Bitcoin’s market cap is relatively high compared to stablecoin supply, potentially signaling bullish market conditions.
Z-Score < 0: SSR is below average, indicating stablecoin supply is high relative to Bitcoin’s market cap, possibly signaling bearish pressure or increased liquidity waiting to enter the market.
Upper and Lower Bands: These user-defined levels (e.g., +2 and -2) represent thresholds for extreme conditions. Values above the upper band may indicate overbought or overheated market conditions, while values below the lower band may indicate oversold or undervalued conditions.
Additional Features:
A dynamic table displays a linear scaled Z-Score alongside the main plot, clamped between -2 and +2 relative to the upper and lower bands for intuitive interpretation.
Usage Tips:
Combine the SSRO Z-Score with other technical indicators or volume analysis for more reliable signals.
Look for divergence between price and Z-Score extremes as potential reversal signals.
Alpha1Alpha1 is a streamlined trend analysis tool designed to offer visual clarity for directional bias in various market conditions. This script combines adaptive price tracking with dynamic smoothing logic to help traders stay aligned with the prevailing trend.
It is optimized for both short-term and mid-term chart analysis and integrates seamlessly with a wide range of trading strategies. It best works on 15 minute time frame.
This is an invite-only tool intended for private research and use. For educational purposes only — not financial advice.
RSI BreakoutFrom Wikipedia, the free encyclopedia
"Math" and "Maths" redirect here. For other uses, see Mathematics (disambiguation) and Math (disambiguation).
Part of a series on
Mathematics
HistoryIndex
Areas
Number theoryGeometryAlgebraCalculus and AnalysisDiscrete mathematicsLogicSet theoryProbabilityStatistics and Decision theory
Relationship with sciences
PhysicsChemistryGeosciencesComputationBiologyLinguisticsEconomicsPhilosophyEducation
Mathematics Portal
vte
Mathematics is a field of study that discovers and organizes methods, theories and theorems that are developed and proved for the needs of empirical sciences and mathematics itself. There are many areas of mathematics, which include number theory (the study of numbers), algebra (the study of formulas and related structures), geometry (the study of shapes and spaces that contain them), analysis (the study of continuous changes), and set theory (presently used as a foundation for all mathematics).
Mathematics involves the description and manipulation of abstract objects that consist of either abstractions from nature or—in modern mathematics—purely abstract entities that are stipulated to have certain properties, called axioms. Mathematics uses pure reason to prove properties of objects, a proof consisting of a succession of applications of deductive rules to already established results. These results include previously proved theorems, axioms, and—in case of abstraction from nature—some basic properties that are considered true starting points of the theory under consideration.
Mathematics is essential in the natural sciences, engineering, medicine, finance, computer science, and the social sciences. Although mathematics is extensively used for modeling phenomena, the fundamental truths of mathematics are independent of any scientific experimentation. Some areas of mathematics, such as statistics and game theory, are developed in close correlation with their applications and are often grouped under applied mathematics. Other areas are developed independently from any application (and are therefore called pure mathematics) but often later find practical applications.
Historically, the concept of a proof and its associated mathematical rigour first appeared in Greek mathematics, most notably in Euclid's Elements. Since its beginning, mathematics was primarily divided into geometry and arithmetic (the manipulation of natural numbers and fractions), until the 16th and 17th centuries, when algebra and infinitesimal calculus were introduced as new fields. Since then, the interaction between mathematical innovations and scientific discoveries has led to a correlated increase in the development of both. At the end of the 19th century, the foundational crisis of mathematics led to the systematization of the axiomatic method, which heralded a dramatic increase in the number of mathematical areas and their fields of application. The contemporary Mathematics Subject Classification lists more than sixty first-level areas of mathematics.
STWP Probable Pullback/Reversal Indicator with PNL Table1. Overview
The STWP Probable Pullback/Reversal Indicator is a powerful, all-in-one technical tool designed to help traders identify high-probability reversal or pullback opportunities in the market. Built with precision, it combines candlestick patterns, trend validation, RSI strength, and volume analysis to generate more reliable entry signals. This indicator is ideal for intraday and swing traders, especially beginners who struggle to decode market movements or often enter trades too early or too late. It aims to simplify decision-making, reduce guesswork, and improve the timing of entries and exits, ultimately helping traders build more consistent strategies while managing risk effectively.
2. Signal Generation Logic
The signal generation logic of the STWP Probable Pullback/Reversal Indicator is built on a multi-layered confirmation system to ensure high-probability entries. It begins with the identification of powerful candlestick reversal patterns such as Bullish Engulfing, Bearish Engulfing, and the Piercing Line, which are commonly used by professional traders to spot potential reversals. To validate the overall trend, the indicator uses the 200 EMA—signals that align with the EMA trend direction are considered more reliable. An RSI filter is applied to assess whether the stock is in an overbought or oversold zone, helping confirm if the price move is genuinely strong or losing momentum. Additionally, a volume filter is used to tag each signal with either high or low volume, allowing traders to further gauge the strength behind the move. All these components—candlestick pattern, trend confirmation, RSI condition, and volume strength—work in synergy, and the signal is only highlighted when all selected conditions align, offering an optional but powerful confluence-based confirmation approach.
3. Settings
The indicator comes with flexible settings to help you tailor the signals to your trading style. You can choose which candlestick patterns to include, such as Bullish Engulfing, Bearish Engulfing, Piercing Line, Morning Star, and Evening Star. The trend is confirmed using the 200-period Exponential Moving Average (EMA), but you can also customize the EMA period if you prefer. To gauge momentum, the Relative Strength Index (RSI) is set to a 10-period default, which helps identify overbought and oversold conditions more sensitively. Additionally, a volume filter labels entries as high or low volume, allowing you to spot stronger moves. You have the option to require confirmation from all filters—pattern, trend, RSI, and volume—for more reliable signals, or to accept signals based on selected criteria. The display settings let you customize how signals appear on the chart, including colors and labels, and alert options notify you of bullish or bearish setups and volume spikes, ensuring you never miss an opportunity.
4. How To Trade Using This Indicator
How to Trade Using the Indicator
To effectively use this indicator, first watch for key candlestick patterns like Bullish Engulfing, Bearish Engulfing, and Piercing Line, which act as initial trade signals. Additionally, you can explore other candlestick patterns to broaden your signal generation and find more opportunities. Next, confirm the prevailing trend by checking the position of price relative to the 200-period EMA — trades aligned with this trend have higher chances of success. The RSI, set at 10 periods, serves as a filter to confirm momentum strength or signs of exhaustion, helping you avoid weak signals. Volume tags highlight whether the entry is supported by high or low trading activity, adding another layer of confidence. Ideally, you look for a combination of these factors — pattern, trend, RSI, and volume — to increase the reliability of your trade setups. Once all these conditions align, enter the trade and manage your exit based on your preferred risk management rules.
5. Additional Features
Additional Features
This indicator goes beyond just signal generation by helping you manage risk and position size effectively. You can set your risk per trade, and the indicator automatically calculates the optimal quantity based on your available capital and stop loss level, making position sizing simple and precise. The built-in formula ensures you never risk more than you’re comfortable with on any single trade. Additionally, a real-time PnL (Profit and Loss) table tracks every trade live, showing movement and performance with easy-to-understand color-coded rows—green for profits and red for losses. This feature is especially useful for manual traders who want to log and monitor their trades seamlessly, helping you stay disciplined and informed throughout your trading session.
6. Customization Options
The indicator is designed to fit your unique trading style with flexible customization settings. You can easily adjust parameters like the RSI period, choose which candlestick patterns to include for signal generation, and set your preferred EMA length for trend validation. Volume filters can be turned on or off, depending on how much weight you want to give to trading activity. Risk management settings such as your risk percentage per trade and stop loss distance are fully adjustable, allowing you to tailor the indicator’s alerts and calculations precisely to your comfort level. These customization options empower you to create a personalized trading tool that matches your goals and market approach, making it easier to spot high-quality trades that suit your strategy.
Disclaimer:
This content is for educational and informational purposes only and does not constitute financial advice, recommendation, or solicitation to buy or sell any financial instruments. Trading in the stock market involves risk, and past performance is not indicative of future results. Please consult with a qualified financial advisor before making any investment decisions. The creator and distributor of this content are not responsible for any losses incurred.
If you find this indicator useful, please follow us for more reliable tools, clear strategies, and valuable market insights to help you trade with confidence.
Should you need any help or assistance with using the indicator, feel free to reach out anytime—I’m here to support you on your trading journey!
IntelliTradeBot📈 IntelliTradeBot – Automated Trade Signals | Scalper & Algo Suite
Type: Invite-Only Indicator
Market: NSE (Nifty 50 & Bank Nifty)
Timeframes: Optimized for 3-minute (3M) scalping
Platform: TradingView + Python Desktop App
Developer:
🔍 Overview
IntelliTradeBot is a fully automated, high-precision trade signal system designed for intraday scalping in Nifty and Bank Nifty indices. Powered by a proprietary algorithm, this indicator leverages real-time price action, volume dynamics, and key support/resistance zones to generate crystal-clear entry/exit signals—no guesswork required.
⚙️ Key Features
✅ Buy/Sell Signal Arrows
Visual alerts for confirmed long/short entries, directly on the chart.
✅ Strike Selection & Options Mapping
Instantly shows option strikes (CE/PE) with entry, SL, and 3 target levels. Ideal for options traders.
✅ Built-in Trade Dashboard
A real-time trade log overlay shows:
Signal Time
Option Type (CE/PE)
Strike Price
Entry, Stop Loss, Target 1, 2, and 3
✅ Zone Markings
Auto-generated demand/supply zones (green/red) for institutional support and resistance insights.
✅ Breakout Detection & Momentum Scalping
Tracks breakout moves with trailing setups using advanced trend recognition.
✅ Companion Desktop App (Python)
Includes a standalone Python-based desktop app for:
Signal alerts
Trade execution (API-ready)
Backtest visualization
Enhanced speed for algo trading
💡 How It Works
The indicator detects low-risk, high-reward trade setups using:
Momentum surges
Smart volume spikes
Historical volatility ranges
Live breakout analysis
Real-time options mapping
Each trade comes with:
Clearly defined SL
Dynamically calculated 3-tiered TP system
Directional bias confirmed with live market structure
🔔 Alerts
Real-time TradingView alerts are fully integrated for:
New trade signals
TP/SL hits
Reversal warnings
🧠 Who Should Use This?
Scalpers looking for 3M setups
Options traders trading CE/PE
Algo developers integrating custom logic
Day traders in the Indian NSE market
🚀 Performance Snapshot (As per Screenshot: 15 May 2025)
Nifty & BankNifty signals show:
Early PE entries with SL hits managed
Midday CE rallies captured with 2x–3x target hits
Clean trend-following execution with minimal drawdown
📎 Access
Invite-Only Access: DM on TradingView or connect via email/whatsapp to request access.
Python App: Available for registered users with valid subscription.
Smoothed ROC Z-Score with TableSmoothed ROC Z-Score with Table
This indicator calculates the Rate of Change (ROC) of a chosen price source and transforms it into a smoothed Z-Score oscillator, allowing you to identify market cycle tops and bottoms with reduced noise.
How it works:
The ROC is calculated over a user-defined length.
A moving average and standard deviation over a separate window are used to standardize the ROC into a Z-Score.
This Z-Score is further smoothed using an exponential moving average (EMA) to filter noise and highlight clearer cycle signals.
The smoothed Z-Score oscillates around zero, with upper and lower bands defined by user inputs (default ±2 standard deviations).
When the Z-Score reaches or exceeds ±3 (customizable), the value shown in the table is clamped at ±2 for clearer interpretation.
The indicator plots the smoothed Z-Score line with zero and band lines, and displays a colored Z-Score table on the right for quick reference.
How to read it:
Values near zero indicate neutral momentum.
Rising Z-Scores towards the upper band suggest increasing positive momentum, possible market tops or strength.
Falling Z-Scores towards the lower band indicate negative momentum, potential bottoms or weakness.
The color-coded table gives an easy visual cue: red/orange for strong positive signals, green/teal for strong negative signals, and gray for neutral zones.
Use cases:
Identify turning points in trending markets.
Filter noisy ROC data for cleaner signals.
Combine with other indicators to time entries and exits more effectively.
DOLThis script highlights potential bullish and bearish setups based on a specific multi-candle pattern, with optional confirmation from additional symbols and time filtering. It also tracks performance metrics such as total setups, wins, and win rate.
Alexandros Vasileiou
VWAP Z-Score Oscillator + Scaled TableVWAP Z-Score Oscillator + Scaled Table
This indicator calculates the Z-Score of the VWAP (Volume Weighted Average Price) based on your chosen source price and reset period (Session, Week, Month, Quarter, or Year).
The Z-Score represents how many standard deviations the current price is from the VWAP, visualized as an oscillator oscillating between ±3 sigma levels. The indicator also features three standard deviation bands for easy reference.
To enhance readability, a scaled Z-Score is displayed in a clean, minimalistic table on the top right of the indicator panel. This score is linearly capped between -2 and +2, mapping the raw Z-Score values with limits at ±3 sigma for clarity and quick assessment.
Use this tool to identify extreme deviations from the VWAP, which may signal potential reversals or continuation of price trends.
肥猫汉化三重平滑信号plotshape(ta.crossunder(v2,v1) ? l : na, title="Bullish Signal", style = shape.labelup, location=location.absolute, size = size.small, color = green)
plotshape(ta.crossover(v2,v1) ? h : na, title="Bearish Signal", style = shape.labeldown, location=location.absolute, size = size.small, color = red)
