Stop Cluster Magnet Map [AGPro Series]Stop Cluster Magnet Map
🧠 Core Idea
Where are clustered stops likely sitting, and is price being pulled toward them or rejecting after a sweep?
📌 Overview / What it does
Stop Cluster Magnet Map is a rule-based liquidity and market-structure visualization tool designed to identify repeated swing-high and swing-low areas where stop orders may cluster.
The script maps upper and lower stop-cluster zones, grades their quality, tracks magnet pressure, and highlights potential sweep or rejection behavior after price interacts with those zones.
It does not predict future price direction, automate trades, or claim that any stop cluster must be taken. It only visualizes structural conditions that may deserve attention.
🎯 Purpose & Design Philosophy
This script was built to solve a common chart-reading problem: traders often talk about liquidity above highs or below lows, but many tools do not clearly separate clustered stop areas from random swing points.
The design goal is to make stop-cluster context visible at a glance without turning the chart into a noisy signal machine.
It helps traders who study price action, liquidity sweeps, equal highs, equal lows, stop hunts, and structural reaction zones.
⚡ Why This Script Is Different
Most tools mark every swing high or swing low as if each level has the same importance.
This script does NOT treat every pivot as meaningful liquidity.
Instead, it looks for repeated nearby swing points, builds a mapped stop-cluster zone, grades the cluster, tracks magnet pressure, and separates sweep behavior from simple proximity.
⚙️ Methodology
1. Context Detection
The script detects confirmed swing highs and swing lows using a configurable pivot length.
2. Reference Mapping
Nearby repeated swing highs are grouped into an upper stop cluster, while nearby repeated swing lows are grouped into a lower stop cluster.
3. Reaction Evaluation
The script evaluates distance, recency, number of touches, sweep events, and post-sweep close behavior.
4. Visual Output
The active stop-cluster zones, magnet rail, right-side tags, event labels, and decision panel are displayed using a clean AGPro visual hierarchy.
🗺️ How to Read the Chart
Zones represent areas where repeated highs or lows have created potential clustered stops.
Labels identify important events such as upper stops, lower stops, magnet pressure, and sweep behavior.
Colors follow the AGPro visual language: teal for lower-side or recovery-oriented context, pink for upper-side or risk-oriented context, yellow for neutral attention, and indigo for magnet reference.
The panel summarizes the current magnet state, score, upper/lower cluster quality, cluster prices, sweep risk, next context, and active timeframe.
🚦 Signals & States
• UPPER STOPS → repeated swing highs have formed a valid upper stop cluster
• LOWER STOPS → repeated swing lows have formed a valid lower stop cluster
• UPSIDE MAGNET → price is near a higher-quality upper stop cluster
• DOWNSIDE MAGNET → price is near a higher-quality lower stop cluster
• UPPER SWEEP → price moved above the upper cluster and closed back inside
• LOWER SWEEP → price moved below the lower cluster and closed back inside
• BALANCED CLUSTERS → both upper and lower clusters are active, with no dominant side
🔔 Alerts Logic
Alerts can trigger when a new upper or lower stop cluster becomes valid, when price sweeps a stop cluster and closes back inside, or when the dominant magnet side changes.
These alerts are attention markers only. They are not buy or sell signals.
🧩 Confluence Logic (Optional)
The context becomes stronger when a valid stop cluster has multiple touches, remains recent, price approaches the cluster, and sweep behavior appears with a close back inside the mapped zone.
Cluster quality plus proximity plus reaction behavior creates a stronger read than any single condition alone.
📊 When to Use
• Around equal highs or equal lows
• During range-bound markets where stop pools may form
• Before or after liquidity sweeps
• When price is approaching a visible cluster of prior swing points
• When evaluating whether a move is targeting external liquidity
⚠️ When NOT to Use
• In extremely illiquid markets
• During chaotic news-driven candles
• When price history is too short to build reliable clusters
• When the chart is dominated by random spikes rather than readable structure
• As a standalone entry or exit system
🎛️ Key Inputs
• Swing Pivot Length → controls how swing highs and lows are confirmed
• Cluster Validity Lookback → controls how long a cluster remains relevant
• Minimum Cluster Touches → controls how many nearby pivots are needed
• Cluster Width ATR → controls how wide each stop-cluster grouping can be
• Magnet Nearness ATR → controls how sensitive magnet proximity becomes
• Visual settings → control zones, labels, right-side tags, panel, and font sizes
🖥️ Interface & Visual Design
The interface is designed for fast chart reading.
The panel gives the current decision context. Zones show where clustered stops may sit. Labels mark key events. Right-side tags keep current levels readable without forcing the trader to inspect every candle.
The layout is intentionally clean, premium, and structured for public-chart screenshots.
🧪 Practical Usage Workflow
1. Read the panel to identify the current magnet state.
2. Check whether the upper or lower stop-cluster zone is active.
3. Watch how price behaves near the mapped cluster.
4. Evaluate whether a sweep closes back inside or continues beyond the zone.
5. Use broader market context before making any decision.
🔍 Interpretation Guidelines
A strong stop cluster does not mean price must move there.
A sweep does not automatically mean reversal.
The best interpretation comes from combining cluster quality, distance, market structure, volume behavior, volatility, and the trader's own higher-timeframe context.
🚫 What This Script Is NOT
This script is not a prediction engine.
It is not financial advice.
It is not an automated trading system.
It does not provide guaranteed signals.
It does not know where actual broker stop orders are placed.
⚠️ Limitations & Transparency
The script estimates stop-cluster areas using visible chart structure only.
Different timeframes may show different clusters.
High volatility can expand zones and change quality scores quickly.
Market conditions can shift, and a previously important cluster may lose relevance over time.
🧠 Market Context Notes (Optional)
Stop clusters often matter because repeated highs and lows can become obvious reference points.
When many traders see the same level, price may react around that area, sweep it, reject from it, or continue through it.
This script is designed to make that structural pressure easier to observe.
🧾 Use Case Examples (Optional)
When price approaches an upper stop cluster with a high quality score, the trader can monitor whether the market sweeps above it and closes back inside.
When lower stops cluster beneath a range, the trader can watch whether price is being pulled toward downside liquidity or rejecting before reaching it.
🧱 System Philosophy (Advanced)
The AGPro approach focuses on structured decision support, not hype.
This script turns repeated swing references into a readable liquidity map so traders can evaluate context instead of reacting to isolated candles.
🔐 Non-Promise Statement
No script can guarantee outcomes.
Stop-cluster mapping is a contextual tool, not certainty.
📉 Risk Disclosure
Trading involves risk.
Users are fully responsible for their own analysis, risk management, and trading decisions.
This script is provided for educational and analytical purposes only and does not constitute financial advice.
📚 Educational Note (Optional)
Use this tool to study how repeated highs, repeated lows, sweeps, and reactions appear across different timeframes.
The goal is to improve market observation, not to replace disciplined analysis. Indicador
Chandelier Exit Flip Zones [AGPro Series]Chandelier Exit Flip Zones
Chandelier Exit Flip Zones is a premium ATR trailing-stop and exit-state engine built for traders who want more than a simple stop line on the chart.
The script takes the classic Chandelier Exit concept and turns it into a structured decision layer:
Chandelier trail -> trail-side flip -> flip quality -> continuation state -> exit-pressure awareness
The result is a clean public-free tool for reading trend continuation, trailing-stop pressure, and Chandelier flip transitions without turning the chart into a crowded signal board.
📌 Why This Script Exists
Chandelier Exit is one of the most practical and searched trailing-stop concepts because it connects trend direction with volatility. Many traders use it to trail positions, judge when momentum is still holding, or identify when price is starting to lose distance from its active stop area.
Most Chandelier tools stop at the line.
This script adds the missing context:
- Which side of the Chandelier trail is active?
- How far is price from the trail in ATR terms?
- Was the latest trail flip strong or weak?
- Is the market still in continuation mode?
- Is price compressing back into an exit-watch area?
- Did the transition create a clean forward flip zone?
That extra layer is what makes the script more useful than a standard ATR trailing-stop overlay.
⚡ What Makes It Different From Standard Chandelier Exit Indicators
Most public Chandelier Exit indicators are visually simple. They usually plot a long stop, a short stop, and sometimes a basic flip marker.
Chandelier Exit Flip Zones is built around a stronger reading model.
It evaluates each trail flip through a quality score that combines:
- Trail-break strength
- EMA trend agreement
- Range expansion
- Candle close location
- Optional volume participation
This means the script does not treat every flip equally. A weak flip inside chop is not presented with the same weight as a cleaner transition with better structure, stronger expansion, and better directional agreement.
The script also uses quality-filtered Flip Zones. These boxes are not generic support and resistance areas. They are drawn around the Chandelier transition area where price breaks the previous trail and establishes a new active side. The purpose is to mark the actual trail-flip area, not to fill the chart with unrelated levels.
🧭 How It Is Different From Other AGProLabs Scripts
This script was intentionally kept in a narrow Chandelier Exit lane so it does not overlap with other AGProLabs public releases.
It is not a SuperTrend script. SuperTrend logic is built around a different volatility-band mechanism, while this tool is built around Chandelier high/low structure anchors and ATR trail distance.
It is not an ATR compression or ATR breakout script. Those concepts focus on volatility contraction, breakout pressure, or expansion behavior. This script focuses on the active trailing-stop side, distance from the Chandelier trail, and exit-state awareness.
It is not a generic trend dashboard. The panel is compact and centered on trail side, ATR multiple, distance, flip quality, and continuation or exit-watch state.
It is not a support/resistance zone engine. The only zones are concept-native Flip Zones created from qualified Chandelier trail transitions.
This keeps the script differentiated, practical, and publication-safe inside the AGPro Series catalog.
✅ Core Features
- Chandelier Exit trail based on ATR distance and recent structure anchors
- Long-side and short-side trail state
- Bullish and bearish trail-flip detection
- Flip quality score from 0 to 100
- Prime, qualified, and developing flip classifications
- ATR distance from the active trail
- Percentage distance from the active trail
- Continuation, control, and exit-watch state logic
- Quality-filtered forward Flip Zones
- Optional exit-watch labels, disabled by default for a cleaner public view
- Label cooldown and maximum label controls
- Maximum visible zone control
- Adjustable label font size
- Adjustable panel font size
- Adjustable panel location
- Dark, light, and auto panel theme options
- AGPro-style panel with a single merged blue header row
- Alerts for bullish flips, bearish flips, prime flips, and exit-watch conditions
📊 Panel Readout
The panel is designed to give a fast read without visual overload:
Trail Side
Shows whether the active Chandelier trail is currently long-side or short-side.
ATR Multiple
Shows the volatility multiple used by the current trail.
Distance
Shows how far price is from the active trail in both ATR and percentage terms.
Flip Quality
Displays the most recent flip score and classification.
State
Classifies the current condition as continuation, control, or exit watch.
🎯 How To Read It
A strong Chandelier flip means price has crossed the prior active trail with enough quality to deserve attention. The score helps separate cleaner transitions from weaker flips in noisy conditions.
A continuation state means price has moved far enough from the active trail and still has trend agreement behind it. This is the cleaner trend-following condition.
A control state means price is on one side of the trail, but the continuation profile is not yet strong enough to classify as a high-conviction continuation read.
An exit-watch state means price has compressed back toward the active Chandelier trail. This does not make the script a prediction tool. It simply highlights that the active trend has less distance from its trailing-stop structure and deserves closer attention.
💎 Why Traders May Like It
The script is useful because it keeps the original simplicity of Chandelier Exit while adding the context traders usually have to judge manually.
It can help users read:
- Trend-following continuation quality
- ATR trailing-stop distance
- Trail-side transitions
- Cleaner Chandelier flip zones
- Exit-pressure areas near the active trail
- Strong versus weak flip behavior
The default view is intentionally restrained. Exit-watch labels are available, but disabled by default so the first chart impression stays cleaner. Flip labels and zones are also filtered by score so the chart does not get flooded during sideways periods.
🛠 Suggested Use Cases
- Trend-following exit management
- Swing-trading trail awareness
- Crypto trend continuation tracking
- Forex and index trailing-stop context
- Stock trend-state monitoring
- Identifying stronger Chandelier trail transitions
- Monitoring when price compresses back toward the active trail
⚙️ Recommended Default Style
The defaults are tuned for a public-free premium view:
- ATR Length: 22
- Structure Lookback: 22
- ATR Multiple: 3.0
- Flip Zones: enabled
- Minimum Zone Score: 50
- Minimum Flip Label Score: 45
- Exit Labels: disabled by default
- Label Font Size: Normal
- Panel Font Size: Normal
- Panel Theme: Dark
These settings keep the tool immediately usable while preserving a clean chart presentation.
🔹 In One Sentence
Chandelier Exit Flip Zones turns a classic ATR trailing stop into a cleaner Chandelier trail, flip-quality, continuation-state, and exit-pressure map built for serious chart reading without unnecessary clutter. Indicador
Session Breaks [crlmx]Session break lines with 3 separate customisable time frames - visibility control for
LTF / MTF / HTF conditions, replacing standard option that clutters charts.
Key Features
- Three independent time-tiers (default: Daily / Weekly / Monthly)
- Options per tier: 30min, 1H, 4H, 12H, D, W, M, Q
- Visibility toggles
- Per-tier colour with opacity, line style, width
- Lookback setting limits how many break lines display
- Overlap handling, only the highest timeframe draws
- Streamlined input / UI brought to you by crlmx
Trading Applications
- Keep daily breaks visible on intraday TF while hiding them on daily+
- Use weekly and monthly breaks as structural reference
- Layer multiple break types with distinct styles for quick session boundary identification
- Disable visibility at or above the break timeframe to avoid redundant lines
Scalping: (1): 30min / (2): 4H / (3): D
Default / Day Trading: (1): D / (2): W / (3): M
Version History
v1.0 (Latest - 04 Mar 2026)
- Three configurable break tiers with visibility toggles
- Per-tier styling, lookback, and overlap priority
- Responsive colour, width, and style controls
Indicador
BOS mark-out (by Lumiere)Advanced BOS Detection with Strict Swing Confirmation
This indicator implements BOS detection with several unique features:
🔹 Dual-Candle Swing Validation - Unlike most BOS indicators that use single candle swings, this uses a two-candle confirmation for swing highs/lows, analyzing both the candle wicks and body transitions.
🔹 Directional Lock System - Implements a state machine that prevents duplicate signals until an opposite-direction BOS occurs, reducing noise.
🔹 Precision Wick Analysis - Compares wicks between the reversal candle and confirmation candle to identify the true swing point.
🔹 Real-Time Update & Live Market Adaptation – The indicator continuously monitors price action and instantly updates BOS signals as new candles form, ensuring you never miss a BOS.
How It Differs From Other BOS Indicators:
Most public BOS indicators use simple HH/HL or LH/LL detection.
Many don't implement the directional locking mechanism.
Few use the two-candle wick comparison approach.
Wick-Based Precision uses the extreme wicks of two candles (not just the body).
Strict Confirmation requires a close beyond the swing point (no "wick breaks" counted).
Usage Examples:
🟦 Bullish BOS:
A green candle closes, followed by a red candle. This will be the new high, and if the next candle closes above the highest wick of those two, it will be a BOS (only if we had a bearish BOS before)
🟥 Bearish BOS:
A red candle closes, followed by a green candle. This will be the new low, and if the next candle closes below the lowest wick of those two, it will be a BOS (only if we had a Bullish BOS before)
Indicador
Indicador
SizeblockPrice change indicator in the form of diagonal rows.
The calculation is based on the percentage or tick deviation of the price movement (indicated in the "Deviation" parameter), which is displayed on the chart in the form of rows.
The row consists of the base middle line, upper and lower limits:
The middle line is the basis for the upper and lower limits of the current row.
The upper and lower limits are deviations from the base middle line of the current row.
The base middle line is equal to the upper or lower limits of the previous row (if the price changes rapidly in one time interval, then the base middle line of the current row is greater than the upper limit of the previous row or less than the lower limit of the previous row by an equal number of deviations depending on the direction of price movement). At the beginning of the calculation, the base middle line is equal to the initial value of the first row.
The "Quantity" parameter determines the deviation for the upper or lower limits depending on the direction of the price movement, and the "U-turn" parameter determines the deviation for changing the direction of the price movement.
The rule for constructing a new row:
The "Source" parameter accepts, depending on the choice, the price of high, low values or the closing price from the time interval of the chart.
When the price reaches the upper or lower limits of the row and goes beyond them, a new row is formed with the same parameters for deviation of the upper and lower limits from the base middle line, depending on the direction of price movement.
By adjusting certain deviations, you can clearly see the local trend and reversal points on the chart.
A useful tool for tracking price direction.
Thanks for your attention! Indicador
Monthly Strategy Performance TableWhat Is This?
This script code adds a Monthly Strategy Performance Table to your Pine Script strategy scripts so you can see a month-by-month and year-by-year breakdown of your P&L as a percentage of your account balance.
The table is based on realized equity rather than open equity, so it only updates the metrics when a trade is closed.
That's why some numbers will not match the Strategy Tester metrics (such as max drawdown), as the Strategy Tester bases metrics like max drawdown on open trade equity and not realized equity (closed trades).
The script is still a work-in-progress, so make sure to read the disclaimer below. But I think it's ready to release the code for others to play around with.
How To Use It
The script code includes one of my strategies as an example strategy. You need to replace my strategy code with your own. To do that just copy the source code below into a blank script, delete lines 11 -> 60 and paste your strategy code in there instead of mine. The script should work with most systems, but make sure to read the disclaimer below.
It works best with a significant amount of historical data, so it may not work very effectively on intraday timeframes as there is a severe limitation of available bars on TradingView. I recommend using it on 4HR timeframes and above, as anything less will produce very little usable data. Having a premium TradingView plan will also help boost the number of available bars.
You can hover your mouse over a table cell to get more information in the form of tooltips (such as the Long and Short win rate if you hover over your total return cell).
Credit
The code in this script is based on open-source code originally written by QuantNomad, I've made significant changes and additions to the original script but all credit for the idea and especially the display table code goes to them - I just built on top of it:
Why Did I Make This?
None of this is trading or investment advice, just my personal opinion based on my experience as a trader and systems developer these past 6+ years:
The TradingView Strategy Tester is severely limited in some important ways. And unless you use complex Excel formulas on exported test data, you can't see a granular perspective of your system's historical performance.
There is much more to creating profitable and tradeable systems than developing a strategy with a good win rate and a good return with a reasonable drawdown.
Some additional questions we need to ask ourselves are:
What did the system's worst drawdown look like?
How long did it last?
How often do drawdowns occur, and how quickly are they typically recovered?
How often do we have a break-even or losing month or year?
What is our expected compounded annual growth rate, and how does that growth rate compare to our max drawdown?
And many more questions that are too long to list and take a lifetime of trading experience to answer.
Without answering these kinds of questions, we run the risk of developing systems that look good on paper, but when it comes to live trading, we are uncomfortable or incapable of enduring the system's granular characteristics.
This Monthly Performance Table script code is intended to help bridge some of that gap with the Strategy Tester's limited default performance data.
Disclaimer
I've done my best to ensure the numbers this code outputs are accurate, and according to my testing with my personal strategy scripts it appears to work fine. But there is always a good chance I've missed something, or that this code will not work with your particular system.
The majority of my TradingView systems are extremely simple single-target systems that operate on a closed-candle basis to minimize many of the data reliability issues with the Strategy Tester, so I was unable to do much testing with multiple targets and pyramiding etc.
I've included a Debug option in the script that will display important data and information on a label each time a trade is closed. I recommend using the Debug option to confirm that the numbers you see in the table are accurate and match what your strategy is actually doing.
Always do your own due diligence, verify all claims as best you can, and never take anyone's word for anything.
Take care, and best of luck with your trading :)
Kind regards,
Matt.
PS. If you're interested in learning how this script works, I have a free hour-long video lesson breaking down the source code - just check out the links below this script or in my profile. Estratégia
[MiV] Trading SessionHello, everyone!
Today I want to present my new script, which I hope will help not only me!
I'm sure that many people, like me, went through such a stage as "building their strategy". This is when you sit and test on the history how you would enter or exit a trade.
Recently I was doing the same thing and realized that my "tests" involve night time, when in reality I would be asleep and not trading! So I decided to create an indicator that would display my "working hours" so that the backtest I conduct would be as realistic as possible.
Also this indicator is able to display sessions of major exchanges and forex working hours, so it will be useful not only for cryptocurrency lovers.
In addition, we don't always trade every day and, for example, I don't trade on Sunday. That's why we added a feature that "turns off" the day and does not highlight it in color if you're not planning to trade on that day.
And finally, I added a notification of the beginning and end of the trading session. A small thing, but it may also be a useful feature for those who like to sit at the chart!
I will be glad to receive any comments and suggestions!
-----
Всем привет!
Хочу сегодня представить свой новый скрипт, который, надеюсь, поможет не только мне!
Уверен, что многие, как и я, проходили такой этап как "постройка своей стратегии". Это когда ты сидишь и тестируешь на истории то как бы ты входил или выходил из сделки.
Вот недавно я ровно также занимался этим и осознал, что мои "тесты" затрагивают и ночное время, когда в реальности я бы спал и не торговал! Поэтому я решил создать индикатор, который будет отображать мои "рабочие часы", чтобы бектест, который я провожу, был максимально реалистичным.
Также данный индикатор умеет отображать сессии крупных бирж и время работы форекса, так что полезным он будет не только для любителей криптовалюты.
Кроме того, мы же не всегда торгуем каждый день и например я не торгую в воскресенье. Поэтому добавлен функционал, который "выключает" день и не подсвечивает его цветом, если ты в этот день не планируешь торговать.
Ну и в заключении, добавил уведомление о начале и завершении торговой сессии. Мелочь, а тоже может быть полезной фичей для тех кто любит засесть за графиком!
Буду рад любым замечаниям и предложениям! Indicador
Indicador
Indicador
MFE & MAE ToolThis is a simple implementation of the MFE/MAE Tool for TradingView.
It's a quite powerful tool and pretty useful in systematic trading, but I don't see many trader using it these days.
It's created for EMA cross, but you can easily change it to use your own signals.
What is MAE/MFE Tool
MAE stands for Maximum Adverse Excursion - Worst P&L during the trade
MFE stands for Maximum Favorable Excursion - Best P&L during the trade
The idea is pretty simple. We take only signals without any position management or exits and measure the best/worst P&L for the next X bars after the signal was.
The primary use case for it is to understand how good your signals are .
If you'll add complicated money management tools, exits, and SL/PT to your strategy, it brings quite a lot of noise. After that, it's pretty tricky to understand if your signals bring much information about future price movements. In other words, bad money management can ruin good signals, and you might discard the entire strategy without knowing that. So this is why I think it's important to check the quality of your signals separately.
Another simple way to use it is to estimate where to put SL/PT
In this example, we're computing MAE/MFE in percent. We're plotting it both on the chart and computing some statistics based on it. This is why it's pretty easy to get a quick understanding of what is your SL/PT should be.
MAE/MFE tool consists of a:
Chart - it displays a point for every signal. Long/Short trades can have different colors. On hover you'll see details for this signal.
Table with stats - we're computing basic metrics for these Signals like average/min/median/max MAE/MFE, number of trades, and how many trades hit selected SL and PT. Stats are also separated by the side so you can see performance separately for longs and shorts.
The indicator is highly customizable, you can configure:
Bars you want to use to compute MAE/MFE
Side selection
SL and R:R
Styling of the chart
Position and style of the table
Parameters for the EMA
EMA cross and its parameter were selected randomly, so don't estimate to see a great performance here.
MFE/MAE tool is a pretty powerful concept. At some point, I'll create an entire article in my blog with more examples and descriptions.
Thanks to @MUQWISHI for helping code it.
Disclaimer
Please remember that past performance may not indicate future results.
Due to various factors, including changing market conditions, the strategy may no longer perform as well as in historical backtesting.
This post and the script don’t provide any financial advice. Indicador
Indicador
Indicador
Candle LevelsCandle Levels
Allows chart levels to be plotted automatically, simply add tool to chart and the interactive mode will prompt for candle selection, timeframe anchor and some label choices such as displaying time, price or disabling labels altogether.
Also a note can be supplied that will be shown in the labels if they're displayed, if not it'll be up in the indicator values if those are enabled. Colors and individual labels can be customized, encourage saving over defaults for repeated usage.
Levels calculated:
Standard OHLC
Close to open mid point
High to low mid point
High wick mid point (either between close or open, whichever is higher)
Low wick mid point (either between close or open, whichever is lower)
I have plans to better detected levels and labels overlap to perhaps do something with that, for now manually toggling display of label should suffice.
I've tested with various markets such as futures, standard stock markets and also various higher and lower timeframes, if something is found to not be working please let me know.
Enjoy! Indicador
Indicador
Estratégia
Indicador
Indicador
Indicador
Indicador
Indicador
columnsLibrary "columns"
Error Tolerant Matrix Setter/Getter Operations. Easy ways to add/remove items into start and end of Columns as well as arrays to grow and shrink matrix.
if mismatched sizes occur the typified NA value will be there to prevent catastrophic crashing.
Rows and Columns are split into 2 libraries due to limitations on number of exports as well as ease of style (columns.shift(), rows.pop() )
pop(_matrix)
do pop last Column off of matrix
Parameters:
_matrix : Matrix To Edit
Returns: Array of Last Column, removing it from matrix
shift(_matrix)
do shift the first Column off of matrix
Parameters:
_matrix : Matrix To Edit
Returns: Array of First Column, removing it from matrix
get(_matrix, _clmnNum)
retrieve specific Column of matrix
Parameters:
_matrix : Matrix To Edit
_clmnNum : Column being Targeted
Returns: Array of selected Column number, leaving in place
push(_matrix, _clmnNum, _item)
add single item onto end of Column
Parameters:
_matrix : Matrix To Edit
_clmnNum : Column being Targeted
_item : Item to Push on Column
Returns: shifted item from Column start
push(_matrix, _array)
add single item onto end of matrix
Parameters:
_matrix : Matrix To Edit
_array : Array to Push on Matrix
Returns: Void
unshift(_matrix, _clmnNum, _item)
slide single item into start of Column remove last
Parameters:
_matrix : Matrix To Edit
_clmnNum : Column being Targeted
_item : Item to Unshift on Column
Returns: popped item from Column end
unshift(_matrix, _array)
add single item into first Column of matrix
Parameters:
_matrix : Matrix To Edit
_array : Array to unshift into Matrix
Returns: Void
set(_matrix, _clmnNum, _array)
replace an array to an existing Column
Parameters:
_matrix : Matrix To Edit
_clmnNum : Column being Targeted
_array : Array to place in Matrix
Returns: Column that was replaced
insert(_matrix, _clmnNum, _array)
insert an array to a new Column
Parameters:
_matrix : Matrix To Edit
_clmnNum : Column being Targeted
_array : Array to place in Matrix
Returns: void
slideDown(_matrix, _array)
add single item onto end of Column
Parameters:
_matrix : Matrix To Edit
_array : Array to push to Matrix
Returns: shifted first Column
slideUp(_matrix, _array)
add single item onto end of Column
Parameters:
_matrix : Matrix To Edit
_array : Array to unshift to Matrix
Returns: poppeed last Column
pullOut(_matrix, _clmnNum)
add single item onto end of Column
Parameters:
_matrix : Matrix To Edit
_clmnNum : Column being Targeted
Returns: removed selected Column Biblioteca
rowsLibrary "rows"
Error Tolerant Matrix Setter/Getter Operations. Easy ways to add/remove items into start and end of rows as well as arrays to grow and shrink matrix.
if mismatched sizes occur the typified NA value will be there to prevent catastrophic crashing.
columns and rows are split into 2 libraries due to limitations on number of exports as well as ease of style (columns.shift(), rows.pop() )
pop(_matrix)
do pop last row off of matrix
Parameters:
_matrix : Matrix To Edit
Returns: Array of Last row, removing it from matrix
shift(_matrix)
do shift the first row off of matrix
Parameters:
_matrix : Matrix To Edit
Returns: Array of First row, removing it from matrix
get(_matrix, _rowNum)
retrieve specific row of matrix
Parameters:
_matrix : Matrix To Edit
_rowNum : Row being Targeted
Returns: Array of selected row number, leaving in place
push(_matrix, _rowNum, _item)
add single item onto end of row
Parameters:
_matrix : Matrix To Edit
_rowNum : Row being Targeted
_item : Item to Push on Row
Returns: shifted item from row start
push(_matrix, _array)
add single item onto end of matrix
Parameters:
_matrix : Matrix To Edit
_array : Array to Push on Matrix
Returns: Void
unshift(_matrix, _rowNum, _item)
slide single item into start of row remove last
Parameters:
_matrix : Matrix To Edit
_rowNum : Row being Targeted
_item : Item to Unshift on Row
Returns: popped item from row end
unshift(_matrix, _array)
add single item into first row of matrix
Parameters:
_matrix : Matrix To Edit
_array : Array to unshift into Matrix
Returns: Void
set(_matrix, _rowNum, _array)
replace an array to an existing row
Parameters:
_matrix : Matrix To Edit
_rowNum : Row being Targeted
_array : Array to place in Matrix
Returns: row that was replaced
insert(_matrix, _rowNum, _array)
insert an array to a new row
Parameters:
_matrix : Matrix To Edit
_rowNum : Row being Targeted
_array : Array to place in Matrix
Returns: void
slideDown(_matrix, _array)
add single item onto end of row
Parameters:
_matrix : Matrix To Edit
_array : Array to push to Matrix
Returns: shifted first row
slideUp(_matrix, _array)
add single item onto end of row
Parameters:
_matrix : Matrix To Edit
_array : Array to unshift to Matrix
Returns: popped last row
pullOut(_matrix, _rowNum)
add single item onto end of row
Parameters:
_matrix : Matrix To Edit
_rowNum : Row being Targeted
Returns: removed selected row Biblioteca
