Começar

Previousdayhighandlow

[Tiestobob] Previous Day and Overnight Highs/Lows** Previous Day and Overnight Highs/Lows** This indicator plots two of the most widely watched price levels used by intraday traders — the **Previous Day High/Low (PDH/PDL)** and the **Overnight High/Low (ONH/ONL)** — directly on your chart, automatically adjusted for New York time (EST/EDT). --- **📌 What It Does** - **Previous Day H/L** — Draws dashed white lines at the prior trading day's high and low (6:00 PM – 4:00 PM ET session) - **Overnight H/L** — Draws dotted green/red lines marking the high and low of the overnight session (6:00 PM – 9:30 AM ET), a key range watched by futures and forex traders before the regular market open - Optional **H/L labels** (PDH, PDL, ONH, ONL) appear at the close of each session - Lines can be **extended to the right** so levels remain visible throughout the trading day --- **⚙️ Settings** | Option | Description | |---|---| | Select what to plot | Choose between Previous Day H/L or Overnight H/L | | Show H/L Labels | Toggle end-of-session labels on/off | | Line Width | Adjust line thickness (1–3) | | Extend Lines Right | Keep levels visible after the session ends | --- **📋 Notes** - All sessions are calculated using the **America/New_York** timezone, automatically accounting for daylight saving time - Best used on intraday timeframes (1m, 5m, 15m, 1H) - Pairs well with volume profile, VWAP, and market structure tools --- *These levels are commonly used as areas of interest for reversals, breakouts, and liquidity sweeps. Use them as context — not signals.*
Indicador Pine Script®
por Tiestobob
Previous Day High/Low Breakout IndicatorPrevious Day High/Low Breakout Indicator This indicator is built around a simple breakout concept: • Bullish momentum is assumed when price closes above the Previous Day High (PDH) • Bearish momentum is assumed when price closes below the Previous Day Low (PDL) The script continuously tracks the previous session’s high and low levels and uses them as directional breakout triggers. Unlike indicators that rely on multiple lagging filters, this approach focuses primarily on raw price action and market expansion beyond key reference levels. ━━━━━━━━━━━━━━━━━━ CORE LOGIC Previous Day Range Detection The script calculates: • Previous Day High (PDH) • Previous Day Low (PDL) using the selected session settings. These levels remain active until a new session completes and fresh PDH/PDL levels become available. ━━━━━━━━━━━━━━━━━━ LONG LOGIC A BUY signal is generated when: • Price closes above the Previous Day High This indicates that price has broken beyond the prior session’s upper boundary, suggesting possible bullish continuation or expansion. If an active short position exists internally, the script first generates a SELL EXIT signal before flipping to a BUY signal. ━━━━━━━━━━━━━━━━━━ SHORT LOGIC A SELL signal is generated when: • Price closes below the Previous Day Low This indicates that price has broken beneath the prior session’s lower boundary, suggesting possible bearish continuation or downside expansion. If an active long position exists internally, the script first generates a BUY EXIT signal before flipping to a SELL signal. ━━━━━━━━━━━━━━━━━━ EXIT LOGIC The indicator uses an opposite-breakout exit model. Long Exit A BUY EXIT signal occurs when: • A valid bearish breakout appears while a long state is active Short Exit A SELL EXIT signal occurs when: • A valid bullish breakout appears while a short state is active This creates a continuous flip-based structure where the market remains either: • Bullish • Bearish • Neutral depending on the latest breakout condition. ━━━━━━━━━━━━━━━━━━ MARKET COMPATIBILITY This indicator is primarily designed for continuous 24-hour markets such as cryptocurrencies, where Previous Day High and Low levels often act as important breakout reference zones. However, it can also be used on other markets such as: • Indices • Stocks • Forex • Futures with appropriate session selection and trader discretion. ━━━━━━━━━━━━━━━━━━ FLOATING RUNNING P/L LABEL While a trade state is active, the script displays a floating running P/L label on the chart. The label updates dynamically and shows: • Current trade direction • Live unrealized percentage gain/loss The label’s: • Colors • Position offset • Visibility can all be customized from settings. ━━━━━━━━━━━━━━━━━━ BACKTEST WINDOW The indicator includes an optional custom backtest window. When enabled: • Signals • Statistics • Performance calculations are restricted only to the selected date range. This helps isolate specific market conditions or testing periods without affecting the rest of the chart. ━━━━━━━━━━━━━━━━━━ STATISTICS TABLE A compact statistics table is included for quick performance reference. The table displays: • Total Trades • Wins / Losses • Win Rate % • Average Win % • Average Loss % The table position and colors are fully customizable from settings. ━━━━━━━━━━━━━━━━━━ NOTES • This script is an indicator, not a TradingView strategy. • Statistics are internally calculated and intended for analytical reference only. • Performance can vary significantly across assets, sessions, and timeframes. • Always combine breakout systems with proper risk management and market context analysis. ━━━━━━━━━━━━━━━━━━ DISCLAIMER This indicator is provided for educational and informational purposes only and should not be considered financial advice. Trading involves substantial risk, and past performance does not guarantee future results. Always perform your own research, test strategies thoroughly, and use appropriate risk management before trading with real capital.
Indicador Pine Script®
por subrajitmishra
FOREXSOM Previous High LowFOREXSOM Previous High Low automatically plots the Previous Week High PWH, Previous Week Low PWL, Previous Day High PDH, and Previous Day Low PDL using the exact candle wick highs and lows from higher timeframes The indicator is designed for traders who use price action, Smart Money Concepts SMC, ICT concepts, liquidity analysis, and market structure in their trading These levels are commonly used by traders to identify liquidity zones, support and resistance, stop hunts, breakout areas, and potential reversal points during the trading session The script keeps the chart clean while providing important higher timeframe reference levels that many traders use for intraday and swing trading decisions Features Plots exact Previous Week High and Low Plots exact Previous Day High and Low Uses precise wick highs and lows Customizable colors and line styles Adjustable line thickness Lightweight and clean chart design Works across all timeframes Useful for Forex, Crypto, Indices, Commodities, and Futures markets This indicator can be useful for traders analyzing GBPUSD, EURUSD, XAUUSD Gold, NASDAQ, US30, and other highly traded markets
Indicador Pine Script®
por FOREXSOM
Session Strata Mapper [JOAT] Session Strata Mapper Introduction Session Strata Mapper is an overlay indicator that tracks three critical intraday price levels in real time: the Premarket session range (04:00-09:30 ET), the Initial Balance range (09:30-10:30 ET), and the Previous Day's high, low, and midpoint. These levels are rendered as dynamic zones that expand as each session progresses and extend as horizontal reference lines throughout the trading day. Extension projections above and below the Initial Balance provide potential target levels based on the established morning range. Session-based levels represent areas where institutional participation was concentrated during distinct time periods. The premarket range reflects the overnight positioning of market participants before retail hours begin. The Initial Balance captures the price range set by the first hour of regular trading, a period often dominated by institutional order flow. Violations of these levels, especially when accompanied by volume, frequently signal meaningful directional commitment from large participants. Core Concepts 1. Session Detection and Range Building Sessions are detected using TradingView's time() function with a configurable timezone (default: America/New_York). The premarket range builds bar by bar during the 04:00-09:30 window, tracking the running high and low. The Initial Balance does the same during 09:30-10:30. All objects (boxes, lines, labels) update in real time as each session progresses. 2. Initial Balance Extensions The IB range can optionally project extension levels above and below at 0.5x IB multiples. Extensions are labeled IB +1x, IB +2x, etc. These project the IB range beyond the session boundaries and serve as potential continuation targets when price breaks from the IB. 3. Previous Day Levels The previous trading day's high, low, and midpoint are tracked by detecting session-start bars and storing the completed day's range. These levels extend throughout the current session as dashed reference lines and are updated at the start of each new day. 4. Zone Boxes and Line Rendering Each session's range is rendered as a filled zone box that expands during the session and then remains fixed after the session ends. Horizontal lines extend from the session boundaries into the future trading period, providing ongoing reference as price interacts with those levels throughout the day. Features Premarket Range Zone: Live-building box with high, low, and optional midpoint lines Initial Balance Zone: Live-building box with high, low, midpoint, and extension projections Previous Day Levels: Prior session high, low, and midpoint as dashed reference lines Extension Lines: Up to 4 levels of IB extension projections with optional labels Dashboard: Real-time level values and whether price is currently above or below each key level Configurable Timezone: Works for multiple market sessions globally Label Size and Line Width Controls Input Parameters Timezone: Market-specific timezone for session detection Show Premarket, IB, Previous Day: Individual toggles IB Extension Levels: Number of extension multiples to show (0-4) Color inputs for each session type Label size and line width settings How to Use This Indicator Premarket Range as Reference Price trading above the premarket high at the regular session open is constructive. A break below the premarket low often draws bearish attention. The premarket midpoint frequently acts as intraday support or resistance. Initial Balance Breakouts When price breaks above the IB high with momentum, the extension levels provide natural targets. An IB high breakout that reaches IB +1x suggests continuation may carry to IB +2x. Reversals from IB extension levels are also common. Previous Day Level Confluences When the premarket or IB range aligns closely with the previous day's high or low, that confluence represents an area where two independent session-based reference points agree — a stronger potential reaction zone. Limitations Session detection requires intraday data. The indicator is not meaningful on daily or higher timeframes Some brokers and data providers do not include premarket data. On charts without premarket bars, the premarket range will be empty Extension levels are mechanical projections of the IB range. They are reference points, not guaranteed targets The Previous Day tracking resets on each new session. On instruments that trade continuously (such as some crypto markets), the day boundary is user-defined by the timezone setting Originality Statement The integration of three distinct session types (premarket, initial balance, and previous day) within a single dynamically updating visualization system provides a consolidated view that would otherwise require multiple separate tools. The live-expanding zone boxes with simultaneous line extension represent a unified approach to session level tracking. The IB extension projection system is built around the specific multiples used by institutional traders who apply IB methodology. Disclaimer This indicator is for educational and informational purposes only. Session levels are historical reference points and do not predict future price reactions. Price can and regularly does pass through any level without reaction. Use in conjunction with other analysis and always apply proper risk management. -Made with passion by officialjackofalltrades
Indicador Pine Script®
por officialjackofalltrades
Volume Profile - Previous DayPrevious Day Volume Profile (PDVP) plots a fixed volume distribution for the prior trading day directly on your chart. It builds a price-by-volume histogram from the previous session and highlights key auction levels: POC (Point of Control): the price level with the highest traded volume VAH / VAL (Value Area High/Low): the value area boundaries based on your selected percentage Previous Day High/Low: optional session extremes for context How to Use It Contextual Trading: Use the vPOC (Point of Control) and Value Area as magnets or hurdles for price. Price staying inside the Value Area suggests a balanced/ranging market. Price breaking out of the Value Area suggests a trend initiation. Mean Reversion: Look for "Value Area Rejections" at the VAH or VAL to play moves back toward the POC. PDH/PDL Anchors: The blue rays provide instant daily bias. Breaking the Previous Day High often signals bullish momentum, while failing to do so suggests a potential reversal. Settings Auto-Detect Settings: Toggle this on to let the script handle the math, or toggle off to input your own custom "Row Height" in ticks. Value Area %: Defaulted to 70% (Standard). Histogram Width: Adjust how far the profile extends across your chart. Calculation Granularity: Defaulted to 10m for the best balance of speed and accuracy.
Indicador Pine Script®
por prater18
DWM HLOC, Mid & WicksSimple, yet effective. 1. Automatically calculate and projects key price levels from a previous period (Yesterday, OR Last Week / Month) onto the current trading session. It acts as an immediate Support & Resistance map based on historical price action. 2. Multi-Timeframe Logic Modes -- Daily Mode: Projects yesterday's data onto today. Weekly Mode: Projects last week's data onto the current week. 3. Key Levels Visualized The script calculates seven distinct price levels: OHLC: Previous Open, High, Low, and Close. Equilibrium (Mid): The exact 50% mark between the previous High and Low. Wick Midpoints (New): Upper Wick 50%: The midpoint between the High and the top of the body. Lower Wick 50%: The midpoint between the Low and the bottom of the body. 4. Smart "Gap" Visualization The script uses unique starting points to help traders visualize market gaps: Standard Levels (High, Low, Open, Mids): These lines originate from the Previous Period's Open, showing the full context of the level relative to time. Close Level: This line originates from the Current Period's Open. This visually highlights the "Gap" (the jump in price between where the market closed previously and where it opened today). 5. Full Customization Aesthetics: Every line can be individually toggled on/off. Styling: Users can independently change the color, line style (Solid, Dotted, Dashed), and thickness for every specific level.
Indicador Pine Script®
por siLve_R88
Gann Box LogicGann Box Logic Overview The Gann Box Logic indicator is a precision-based trading tool that combines the principles of Gann analysis with retracement logic to highlight high-probability zones of price action. It plots a structured box on the chart based on the previous day's high and low, overlays Fibonacci-derived retracement levels, and visually marks a critical “neutral zone” between 38.2% and 61.8% retracements. This zone — shaded for emphasis — is a decision filter for traders: - It warns against initiating trades in this area (low conviction zone). - It identifies reversal pull targets when extremes are reached. Core Principles Behind Gann Box Logic Logic 1 — The Neutral Zone (38.2% ↔ 61.8%) - The 38.2% and 61.8% retracement levels are key Fibonacci ratios often associated with consolidation or indecision. - Price action between these two levels is considered a neutral, low-conviction zone. - Trading Recommendation: - Avoid initiating new trades while price remains within this shaded band. - This zone tends to produce whipsaws and false signals. - Wait for a decisive break above 61.8% or below 38.2% for clearer momentum. - Why it matters: - In Gann’s market structure thinking, the middle range of a swing is often a battleground where neither bulls nor bears are in full control. - This is the zone where market makers often shake out weak hands before committing to a direction. Logic 2 — Extremes Seek Balance (0% & 100% Reversal Bias) - The indicator’s 0% and 100% levels represent the previous day’s low and high respectively. - First Touch Rule: - When the price touches 0% (previous low) or 100% (previous high) for the first time in the current session, there is a high probability it will attempt to revert toward the center zone (38.2% ↔ 61.8%). - Trading Implication: - If price spikes to an extreme, be alert for reversion trades toward the mid-zone rather than expecting a sustained breakout. - Momentum traders may still pursue breakout trades, but this bias warns of potential pullbacks. - Why it works: - Extreme levels often trigger profit-taking by early entrants and counter-trend entries by mean-reversion traders. - These forces naturally pull the market back toward equilibrium — often near the 50% level or within the shaded zone. How the Indicator is Plotted 1. Previous Day High/Low Reference — The script locks onto the prior day’s range to establish the vertical bounds of the box. 2. Retracement Levels — Key Fibonacci levels plotted: 0%, 25%, 38.2%, 50%, 61.8%, 75%, 100%. 3. Box Structure — Outer Border marks the full prior day range, Mid Fill Zone is shaded between 38.2% and 61.8%. 4. VWAP (Optional) — Daily VWAP overlay for intraday bias confirmation. Practical Usage Guide - Avoid Trades in Neutral Zone — Stay out of the shaded area unless you’re already in a trade from outside this zone. - Watch for First Touch Extremes — First touch at 0% or 100% → anticipate a pullback toward the shaded zone. - Breakout Confirmation — Only commit to breakout trades when price leaves the 38.2–61.8% zone with strong volume and momentum. - VWAP Confluence — VWAP crossing through the shaded zone often signals a balance day — breakout expectations should be tempered. Strengths of Gann Box Logic - Removes noise trades during low-conviction periods. - Encourages patience and discipline. - Highlights key market turning points. - Provides clear visual structure for both new and advanced traders. Limitations & Warnings - Not a standalone entry system — best used in conjunction with price action and volume analysis. - Extreme moves can sometimes trend without reversion, especially during news-driven sessions. - Works best on intraday timeframes when referencing the previous day’s range. In Summary The Gann Box Logic indicator’s philosophy can be boiled down to two golden rules: 1. Do nothing in the middle — Avoid trades between 38.2% and 61.8%. 2. Expect balance from extremes — First touches at 0% or 100% often pull back toward the shaded mid-zone. This dual approach makes the indicator both a trade filter and a targeting guide, allowing traders to navigate markets with a structured, Gann-inspired framework. DISCLAIMER The information provided by this indicator is for educational purposes only and should not be considered financial advice. Trading carries risk, including possible loss of capital. Past performance does not guarantee future results. Always conduct your own research and consult with a qualified financial professional before making trading decisions.
Indicador Pine Script®
por moneypots
DTLLC Time & PriceDTLLC Time and Price with Signals This indicator is built for traders who understand ICT concepts and want a structured, visual way to align time-based price action with key market levels. By combining customizable trading windows, breakout logic, and daily reference points, it helps you identify high-probability trade opportunities while filtering out market noise. Key Features 1. Dual Custom Time Ranges (Kill Zones) Set two independent time ranges per day (start/end hour and minute). Each range identifies the highest high and lowest low within its window. Built-in breakout detection generates buy/sell signals when price moves beyond these levels. 2. Volatility Filtering Adjustable volatility threshold based on True Range relative to ATR. Filters out low-quality signals during choppy, low-volatility conditions. 3. ATR-Based Stop Loss Custom ATR length and stop-loss multiplier settings. Automatically plots ATR-based stop levels for triggered trades. 4. Daily Key Levels Plots Previous Day High, Previous Day Low, and Midnight Open continuously on the chart. Useful for spotting breakout and reversal opportunities in line with ICT market structure concepts. 5. Liquidity & Engulfing Candle Highlights Highlights potential liquidity grab zones (yellow candles) when significant highs/lows are set within your lookback period. Detects bullish (green) and bearish (red) engulfing patterns for added confluence. 6. Visual & Signal Tools Buy/Sell signals plotted directly on chart (separate colors for Range 1 and Range 2). Continuous plotting of reference levels to maintain market context throughout the session. Example Use Case: A common ICT-inspired reversal setup: Wait for price to sweep the Previous Day’s High or Low during your chosen time range. Look for a buy or sell signal with volatility confirmation. Manage risk using the ATR-based stop-loss plot. Disclaimer: This script is for educational purposes only and is not financial advice. Trade responsibly and always test strategies before applying them in live markets.
Indicador Pine Script®
por DivergentTrades
2
Previous Levels by HAZEDPrevious Day/Week/Month High/Low Levels with 50% Equilibrium 🎯 Key Features: - Previous Period Levels: Automatically plots previous Day, Week, and Month highs and lows - 50% Equilibrium Zones: Shows the midpoint between each period's high and low - Precise Line Placement: Lines start from the exact bar where the high/low occurred (not period beginning) - Clean Visual Design: Solid lines for key levels, semi-transparent for equilibrium zones - Customizable Display: Toggle each timeframe independently with custom colors and styles 📊 How It Works: The indicator identifies the previous period's high and low points, then draws horizontal lines starting from the exact time those levels were created. The 50% equilibrium levels mark the midpoint between each period's range, providing additional support/resistance reference points. ⚙️ Settings: - Timeframe Controls: Enable/disable Daily, Weekly, Monthly levels - Line Styles: Choose between solid, dashed, or dotted lines - Color Customization: Set individual colors for each timeframe - Label Options: Show/hide price values, adjust label size - 50% Levels: Toggle equilibrium zones with semi-transparent styling 💡 Trading Applications: - Support & Resistance: Previous highs/lows act as key S/R levels - Breakout Trading: Monitor price action around these critical levels - Mean Reversion: 50% equilibrium zones often act as magnet levels - Multi-Timeframe Analysis: See how different timeframe levels interact 🔧 Technical Notes: - Lines extend to the right for future reference - Only shows levels when chart timeframe is equal or lower than the level timeframe - Uses precise historical data to ensure accurate line placement - Optimized for performance with clean code structure Perfect for swing traders, day traders, and anyone using support/resistance analysis! Feel free to leave feedback and suggestions for future updates!
Indicador Pine Script®
por hazedoptions
2
Liquidity Sweep Detector - PDH/PDL LevelsPrevious Day High/Low Liquidity Sweep Detector (Intraday Accurate) This indicator tracks the previous day's high and low using intraday data, rather than the daily candle, ensuring precise sweep detection across lower timeframes (15m to 4H). It monitors for liquidity sweeps—moments when price briefly moves above the previous high or below the previous low—and visually marks these events on the chart. Key Features Intraday-accurate PDH/PDL tracking Real-time sweep detection On-chart labels marking sweep events Toggleable table showing sweep status Alert conditions for PDH/PDL sweep triggers Best For Traders who use Smart Money Concepts (SMC), liquidity-based strategies, or look for stop hunts and reversal zones tied to key prior-day levels. Works well across FX, crypto, and indices on 15m, 1H, and 4H charts.
Indicador Pine Script®
por backtestbay
Custom Previous High/Low + Breakout AlertsThis indicator plots the previous high and low of the selected timeframe and alerts you when the price breaks either level. To prevent spam, it triggers only once per period. If both the high and low break within the same period, you will receive an alert for each, but no duplicates if price hovers around these levels. How to Set Up Alerts 1. Choose Your Timeframe - In the indicator settings, select the timeframe for the high/low reference. - Example: If you select 1 hour, the indicator will plot the previous 1-hour high and low and alert you when either level is broken 2. Create an Alert - Condition → High/Low Break Alerts - Function → Any alert() function call Optional: - If you want alerts only for high breakouts or low breakouts, select High Breakout or Low Breakout and use "Once Per Bar" as the trigger. (It will still alert only once per period.) 3. Setting Alerts for Multiple Timeframes - If you want to create another alert for a different timeframe, first select the new timeframe in the indicator settings, then create a new alert - Note: Previous alerts will continue to notify you based on the timeframe they were originally set for, even if you change the timeframe in the indicator settings.
Indicador Pine Script®
por Ufonose
11
PDH & PDL Indicator: Previous Day's High/Low with AlertsThe PDH & PDL Indicator plots the Previous Day's High (PDH) and Previous Day's Low (PDL) directly on the chart, providing a clear visual reference for key price levels. These levels are often used by traders to identify potential breakout or breakdown zones and to gauge market strength or weakness. Features: PDH (Green Line) : Represents the high of the previous trading day. PDL (Red Line): Represents the low of the previous trading day. Alerts: Get notified when the price crosses above PDH or below PDL. Custom alert messages to keep you informed in real-time. Use Cases: Identify key breakout and breakdown points for potential trade entries or exits. Confirm the strength of a trend by monitoring price action relative to PDH and PDL. Useful for intraday, swing, and positional traders who rely on historical price levels for strategy development.
Indicador Pine Script®
por JS_Trading_Tradingmadesimple
2
Previous Day and Current Day High/LowKey Features: Previous Day High and Low Lines: Displays the high (PDH) and low (PDL) levels of the previous trading day. Allows customization of line colors, styles (solid, dashed, or dotted), and widths. Extends these lines by a specified number of candles into the current day for better visualization. Current Day High and Low Lines: Displays the high (CDH) and low (CDL) levels during the current day's regular trading hours. Customizable line attributes, including color, style, width, and extension length. Customizable Input Options: User-configurable settings for both the previous and current day high/low lines, grouped under respective sections for clarity. Regular trading hours can be defined manually (default is 9:30 AM to 4:00 PM). Ability to toggle the visibility of the lines for both the previous and current days. Automatic Reset at the Start of a New Day: Captures the high and low values of the completed day and resets for the new day. Deletes old lines and labels to ensure clarity and avoid overlap. Dynamic Updates: Updates the current day's high and low lines and labels as new data comes in. Adjusts previous day lines dynamically based on the user-defined number of candles to extend. Session-Based Filtering: Ensures the calculations and updates are restricted to the defined regular trading hours. Code Logic: Input Groups: The script uses grouped inputs to allow users to configure settings for previous and current day levels separately. Line and Label Management: It creates and deletes lines and labels dynamically to prevent clutter and keep the chart organized. Session Check: Uses the session input to determine if a bar falls within regular trading hours. High/Low Calculation: Tracks the high and low for both the previous and current days during regular trading hours. New Day Detection: Identifies the start of a new trading day to update previous day values and reset current day variables. Applications: Intraday Trading: Helps traders identify critical support and resistance levels from the previous and current days. Trend Analysis: Provides visual cues for price movement trends across consecutive days. Custom Visualization: With extensive customization options, traders can adapt the indicator to suit their trading style and chart aesthetics. This script is highly configurable, making it versatile for a wide range of trading strategies and styles.
Indicador Pine Script®
por avithekkc
37
[TTM] ICT Key Levels🌟 Overview 🌟 This tool highlights key price levels, such as highs, lows, and session opens, that can influence market moves. Based on ICT concepts, these levels help traders spot potential areas for market reversals or trend continuations. 🌟 Key Levels 🌟 🔹 Week Open (00:00 EST) Marks the start of the trading week. This level helps track price direction and is useful for framing the Weekly candle formation using ICT’s Power of 3. 🔹 Midnight Open (00:00 EST) The Midnight Open (MNOP) marks the start of the new trading day. Price often retraces to this level for liquidity grabs, setting up larger moves in the daily trend. It's also key for framing the Daily Power of 3 and spotting possible market manipulation. 🔹 New York Stock Exchange Open (09:30 EST) The NYSE Open is a major liquidity event, where price seeks liquidity from earlier in the day, like stop hunts or retracements to the London or Midnight Open. This time often brings reversals or trend continuations as volatility increases. 🔹 Previous Day High/Low These levels show where liquidity rests, often serving as targets for price revisits, ideal for reversals or continuation trades. 🔹 Previous Week High/Low Similar to daily levels but on a larger scale. They help identify swing trades and track broader market trends. 🔹 Previous Month High/Low These monthly levels are important for long-term traders, as price often aims to clear them before setting new trends or market cycles. Happy Trading! TheTickMagnet
Indicador Pine Script®
por TheTickMagnet
21
Previous Highs & Lows [LuxAlgo]The Previous Highs & Lows indicator highlights a user-set amount of previous maximum/minimum prices made within specific intervals, these are displayed as levels customizable levels. Additionally, one upper and lower zone constructed from the previously displayed highs/lows is included, providing support/resistance areas. 🔶 USAGE Previous highs/lows are often perceived as key trading levels with the potential of generating multiple reactions upon being reached. While the daily interval is more commonly used, users can use different intervals, with the indicator supporting hourly, daily, weekly, monthly, and yearly intervals. Using higher intervals on low timeframes can return more distant levels relative to the most recent price, which might not be relevant. Each level is numbered, with more recent previous highs/lows having a lower number associated with them, users can also highlight more recent levels through a transparency gradient. Users can control the amount of previous highs/lows displayed using the "Show Last" settings, with a higher value providing more potential support/resistance. Returned previous highs/lows can eventually be filtered out based on their position by enabling the "Filter Based On Position" setting, only keeping previous highs above the current closing price and previous lows below the current closing price, giving more relevant levels as a result. 🔹 Previous High/Low Areas The indicator includes two areas constructed from the respective percentiles of the returned previous highs/lows. These can be useful as more general support/resistance areas. Wider areas are often indicative of a group of previous highs or lows being more dispersed, resulting in areas that are easier to reach. Wider areas can also be obtained by increasing the "Areas Width" setting. Note: Areas will only be displayed if "Show Last" is greater than 1 🔶 SETTINGS Show Last: Determines the amount of more recent previous highs and previous low levels displayed by the indicator. Interval: Interval used to capture maximum/minimum price values, Areas Width: Width of the displayed top/bottom areas, with higher values returning wider areas. Filter Based On Position: When enabled only display previous highs above the current closing price and previous lows below the current closing price. 🔹 Style Minimum Gradient Transparency: Minimum transparency value applied to the colors of the oldest displayed previous highs/lows levels.
Indicador Pine Script®
por LuxAlgo
10
PDHL levels with INTRADAY Auto FIBThe present script includes Previous day High/low levels and once the PDH or PDL breaks the present bar's background changes color according to the direction of price breakout. It's helpful when working on lower timeframe charts with small screen space, so that the user can know that the PDHL has been taken out in one glance at the chart instead of scrolling all around to find out whether the PDH or PDL are broken or not. The high and low of day before yesterday are also plotted for reference. The intraday fib levels get drawn taking present day's high and low into account, useful to mark support/retest levels. The color of the intraday AUTO FIB high and low lines also change from gray to respective assigned colors once the present day price crosses PDH or PDL this is helpful while viewing charts on mobile app. Disclaimer: Only for studying price movement ideas, trading is not advised.
Indicador Pine Script®
por TathaastuVats
9
Day ClueDay Clue Indicator live Market Information Day Clue Indicator plots days information like " Initial Balance and Range ", " Day Range ", " Current Day Volume (for NIFTY and BANKNIFTY it takes the future volume) ", " ATR ", if the scrip is NIFTY or BANKNIFTY then it shows the difference between SPOT and Future price so that trader will come to know future is trading at premium or discount,it shows current day name at bottom right corner, and it plots the Ema-20 and Ema-200. These information will update during live market. Information for Next Trading Session Day Clue Indicator plots " Previous Day High" , " Previous Day Low ", " Central Pivot Range-CPR with S1 and R1 ","It indicate tomorrow is Trading Day or Trading Holiday(other than Weekend Holidays)" these are information used for next day that will be plot today itself once market closed Limitations of Day Clue Indicator Day Clue Indicator only work in Indian Market(NSE and BSE) Day Clue Indicator only work in " 1-mins, 5-mins, 15-mins " Timeframes, if you switch to other timeframe like 30-mins,1-Hour, Daily then information will hide Thank You
Indicador Pine Script®
por Vignesh_vish
10