vdubus

Vdub Binary Options SniperVX v1

Vdub Binary Options SniperVX v1
Designed for Binary Options 60 sec trading upwards
Notes on chart
Please note the signal generated are configure to be super fast on candle opening. The down side to this is signals may switch direction mid stream.
ITM candlesticks signals generated went 6/300 Losses on a 1 min chart.
the blue line indicates reversal zones. Buy / sell targets are at the next projected line TF settings to suit

Sniper series

Remover dos scripts favoritos Adicionar aos scripts favoritos
//╭╮╱╱╭╮╭╮╱╱╭╮
//┃╰╮╭╯┃┃┃╱╱┃┃
//╰╮┃┃╭┻╯┣╮╭┫╰━┳╮╭┳━━╮
//╱┃╰╯┃╭╮┃┃┃┃╭╮┃┃┃┃━━┫
//╱╰╮╭┫╰╯┃╰╯┃╰╯┃╰╯┣━━┃
//╱╱╰╯╰━━┻━━┻━━┻━━┻━━╯
//╭━━━┳╮╱╱╱╱╱╱╱╭╮
//┃╭━╮┃┃╱╱╱╱╱╱╱┃┃
//┃┃╱╰┫╰━┳━━┳━╮╭━╮╭━━┫┃
//┃┃╱╭┫╭╮┃╭╮┃╭╮┫╭╮┫┃━┫┃
//┃╰━╯┃┃┃┃╭╮┃┃┃┃┃┃┃┃━┫╰╮
//╰━━━┻╯╰┻╯╰┻╯╰┻╯╰┻━━┻━╯
//━╯
//Vdub Binary Options SnipperVX v1 / Vdub Rejection Spike v3 intergration -
//Signal generator for Binary Options / ©Vdubus http://www.vdubus.co.uk/
study("Vdub Binary Options SniperVX  v1", overlay=true, shorttitle="Vdub_SniperBX_v1")
//
//====================channel======================
len = input(8, minval=1)
src = input(close, title="Source")
out = sma(src, len)
last8h = highest(close, 13)
lastl8 = lowest(close, 13)
bearish = cross(close,out) == 1 and close[1] > close
bullish = cross(close,out) == 1 and close[1] < close
channel2=input(false, title="Bar Channel On/Off")
ul2=plot(channel2?last8h:last8h==nz(last8h[1])?last8h:na, color=black, linewidth=1, style=linebr, title="Candle body resistance level top", offset=0)
ll2=plot(channel2?lastl8:lastl8==nz(lastl8[1])?lastl8:na, color=black, linewidth=1, style=linebr, title="Candle body resistance level bottom", offset=0)
//
//--------------------Trend colour ema------------------------------------------------//    ema trend direction trigger For Singals 1 & 2
src0 = close, len0 = input(13, minval=1, title="Trend Change EMA")
ema0 = ema(src0, len0)
plot_color = ema0 >= ema0[2]  ? lime: ema0 < ema0[2] ? red : na
plot(ema0, title="EMA", style=line, linewidth=1, color = plot_color)
//
//--Modified vyacheslav.shindin-------------------------------------------------//           Signal 1
//Configured ema signal output
slow = 8
fast = 5
vh1 = ema(highest(avg(low, close), fast), 5)
vl1 = ema(lowest(avg(high, close), slow), 8)
//
e_ema1 = ema(close, 1)
e_ema2 = ema(e_ema1, 1)
e_ema3 = ema(e_ema2, 1)
tema = 1 * (e_ema1 - e_ema2) + e_ema3
//
e_e1 = ema(close, 8)
e_e2 = ema(e_e1, 5)
dema = 2 * e_e1 - e_e2
signal = tema > dema ? max(vh1, vl1) : min(vh1, vl1)
is_call = tema > dema and signal > low and (signal-signal[1] > signal[1]-signal[2])
is_put = tema < dema and signal < high and (signal[1]-signal > signal[2]-signal[1])
 
plotshape(is_call ? 1 : na, title="BUY ARROW", color=green, text="*BUY*", style=shape.arrowup, location=location.belowbar)
plotshape(is_put ? -1 : na, title="SELL ARROW", color=red, text="*SELL*", style=shape.arrowdown)
//
//Modified - Rajandran R Supertrend----------------------------------------------------- //       Signal 2
Factor=input(1, minval=1,maxval = 000, title="Trend Transition Signal")
Pd=input(1, minval=1,maxval = 100)
Up=hl2-(Factor*atr(Pd))
Dn=hl2+(Factor*atr(Pd))
TrendUp=close[1]>TrendUp[1]? max(Up,TrendUp[1]) : Up
TrendDown=close[1]<TrendDown[1]? min(Dn,TrendDown[1]) : Dn
Trend = close > TrendDown[1] ? 1: close< TrendUp[1]? -1: nz(Trend[1],0)
 
plotarrow(Trend == 1 and Trend[1] == -1 ? Trend : na, title="Up Entry Arrow", colorup=lime, maxheight=1000, minheight=50, transp=85)
plotarrow(Trend == -1 and Trend[1] == 1 ? Trend : na, title="Down Entry Arrow", colordown=red, maxheight=1000, minheight=50, transp=85)
// Moddified [RS]Support and Resistance V0
RST = input(title='Support / Resistance length:', type=integer, defval=21)
RSTT = valuewhen(high >= highest(high, RST), high, 0)
RSTB = valuewhen(low <= lowest(low, RST), low, 0)
RT2 = plot(RSTT, color=RSTT != RSTT[1] ? na : red, linewidth=1, offset=0)
RB2 = plot(RSTB, color=RSTB != RSTB[1] ? na : green, linewidth=1, offset=0)
//
//===============================Directional Projection=======================================//
tf2 = input('1', title="Trend Projection TF / Mins/D/W")
M2 = input('ATR')
P2 = input(13.00, type=float)
W2 = input(1)
pf2 = pointfigure(tickerid, 'close', M2, P2, W2)
spfc2 = security(pf2, tf2, close)
channel3=input(false, title="Connect Projection High/Low")
p22=plot(channel3?spfc2:spfc2==nz(spfc2[1])?spfc2:na, color=blue, linewidth=2, style=linebr, title="Directional Projection", offset=0)
//----------------------------------------------------------------------//

Comentários

How long should this be trades for? 1 min or 2 min?
+176 Resposta
this to be used on min chart only
?
+64 Resposta
MarxBabu HumayunBajwa
@HumayunBajwa, Add this for more profitability
code available here

+84 Resposta
If the "buy" or "sell" signs overlap the big arrow is that a greater confirmation?
+50 Resposta
brecier yogatrader
@yogatrader, yes please
+2 Resposta
Program works great..been using for 6 months. Do you offer automated signals for this on Mt4? Or text/email alerts?
Thanks
+42 Resposta
shohei95 Forex-Top-Investments
@Forex-Top-Investments,

Exquse me. I want to know how to use this vdubsniper. Where do we entry point?
+50 Resposta
Not working more lost trades than wins.70% lost 30 % win.
+36 Resposta
Início Rastreador de Fundamentos Rastreador Forex Rastreador de Criptomoedas Calendário Econômico Como Funciona Recursos gráficos Preços Indique um Amigo Regras da Casa Central de Ajuda Soluções para Sites & Corretoras Widgets Soluções em Gráficos Biblioteca de Gráficos Lightweight Blog & Notícias Twitter
Perfil Configurações de perfil Conta e Cobrança Amigos indicados Moedas Meus Tíquetes de Suporte Central de Ajuda Ideias Publicadas Seguidores Seguindo Mensagens Privadas Conversa Deslogar