JayRogers

Open Close Cross Strategy

Revision: 1

Description:
  • Strategy based around Open-Close Crossovers, which can be tuned for smooth trend trading, or with a little care even work for choppy waters .
Setup:
  • I have generally found that setting the strategy resolution to 3-4x that of the chart you are viewing tends to yield the best results, regardless of which MA option you may choose (if any)
  • Don't aim for perfection. Just aim to get a reasonably snug fit with the O-C band, with good runs of green and red.
  • Option to either use basic open and close series data, or pick your poison with a wide array of MA types.
  • Optional trailing stop for damage mitigation if desired (can be toggled on/off)
  • Positions get taken directly following a crossover - which is why it's better to set the resolution of the script greater than that of your chart, so that the trades get taken sooner rather than later.
  • If you make use of the trailing stops, be sure to take your time tweaking the values. Cutting it too fine may cost you profits but keep you safer, while letting them loose could lead to more drawdown than you can handle.
Remover dos Scripts Favoritos Adicionar para Scripts Favoritos
//@version=2

strategy(title = "Open Close Cross Strategy", shorttitle = "OCC Strategy", overlay = true, pyramiding = 0, default_qty_type = strategy.percent_of_equity, default_qty_value = 10)

// Revision:        1
// Author:          @JayRogers
//
// Description:
//  - Strategy based around Open-Close Crossovers.
// Setup:
//  - I have generally found that setting the strategy resolution to 3-4x that of the chart you are viewing
//    tends to yield the best results, regardless of which MA option you may choose (if any)
//  - Don't aim for perfection. Just aim to get a reasonably snug fit with the O-C band, with good runs of
//    green and red.
//  - Option to either use basic open and close series data, or pick your poison with a wide array of MA types.
//  - Optional trailing stop for damage mitigation if desired (can be toggled on/off)
//  - Positions get taken automagically following a crossover - which is why it's better to set the resolution
//    of the script greater than that of your chart, so that the trades get taken sooner rather than later.
//  - If you make use of the trailing stops, be sure to take your time tweaking the values. Cutting it too fine
//    will cost you profits but keep you safer, while letting them loose could lead to more drawdown than you
//    can handle.

// === INPUTS ===
useRes      = input(defval = true, title = "Use Alternate Resolution? ( recommended )")
stratRes    = input(defval = "120", title = "Set Resolution ( should not be lower than chart )", type = resolution)
useMA       = input(defval = true, title = "Use MA? ( otherwise use simple Open/Close data )")
basisType   = input(defval = "DEMA", title = "MA Type: SMA, EMA, DEMA, TEMA, WMA, VWMA, SMMA, HullMA, LSMA, ALMA ( case sensitive )", type = string)
basisLen    = input(defval = 14, title = "MA Period", minval = 1)
offsetSigma = input(defval = 6, title = "Offset for LSMA / Sigma for ALMA", minval = 0)
offsetALMA  = input(defval = 0.85, title = "Offset for ALMA", minval = 0, step = 0.01)
useStop     = input(defval = true, title = "Use Trailing Stop?")
slPoints    = input(defval = 200, title = "Stop Loss Trail Points", minval = 1)
slOffset    = input(defval = 400, title = "Stop Loss Trail Offset", minval = 1)
// === /INPUTS ===

// === BASE FUNCTIONS ===
// Returns MA input selection variant, default to SMA if blank or typo.
variant(type, src, len, offSig, offALMA) =>
    v1 = sma(src, len)                                                  // Simple
    v2 = ema(src, len)                                                  // Exponential
    v3 = 2 * v2 - ema(v2, len)                                          // Double Exponential
    v4 = 3 * (v2 - ema(v2, len)) + ema(ema(v2, len), len)               // Triple Exponential
    v5 = wma(src, len)                                                  // Weighted
    v6 = vwma(src, len)                                                 // Volume Weighted
    v7 = na(v5[1]) ? sma(src, len) : (v5[1] * (len - 1) + src) / len    // Smoothed
    v8 = wma(2 * wma(src, len / 2) - wma(src, len), round(sqrt(len)))   // Hull
    v9 = linreg(src, len, offSig)                                       // Least Squares
    v10 = alma(src, len, offALMA, offSig)                               // Arnaud Legoux
    type=="EMA"?v2 : type=="DEMA"?v3 : type=="TEMA"?v4 : type=="WMA"?v5 : type=="VWMA"?v6 : type=="SMMA"?v7 : type=="HullMA"?v8 : type=="LSMA"?v9 : type=="ALMA"?v10 : v1
// security wrapper for repeat calls
reso(exp, use, res) => use ? security(tickerid, res, exp) : exp
// === /BASE FUNCTIONS ===

// === SERIES SETUP ===
// open/close
closeSeries = useMA ? reso(variant(basisType, close, basisLen, offsetSigma, offsetALMA), useRes, stratRes) : reso(close, useRes, stratRes)
openSeries  = useMA ? reso(variant(basisType, open, basisLen, offsetSigma, offsetALMA), useRes, stratRes) : reso(open, useRes, stratRes)
trendState  = closeSeries > openSeries ? true : closeSeries < openSeries ? false : trendState[1]
// === /SERIES ===

// === PLOTTING ===
barcolor(color = closeSeries > openSeries ? #006600 : #990000, title = "Bar Colours")
// channel outline
closePlot   = plot(closeSeries, title = "Close Line", color = #009900, linewidth = 2, style = line, transp = 90)
openPlot    = plot(openSeries, title = "Open Line", color = #CC0000, linewidth = 2, style = line, transp = 90)
// channel fill
closePlotU  = plot(trendState ? closeSeries : na, transp = 100, editable = false)
openPlotU   = plot(trendState ? openSeries : na, transp = 100, editable = false)
closePlotD  = plot(trendState ? na : closeSeries, transp = 100, editable = false)
openPlotD   = plot(trendState ? na : openSeries, transp = 100, editable = false)
fill(openPlotU, closePlotU, title = "Up Trend Fill", color = #009900, transp = 40)
fill(openPlotD, closePlotD, title = "Down Trend Fill", color = #CC0000, transp = 40)
// === /PLOTTING ===

// === STRATEGY ===
// conditions
longCond    = crossover(closeSeries, openSeries)
shortCond   = crossunder(closeSeries, openSeries)
// entries and base exit
strategy.entry("long", strategy.long, when = longCond)
strategy.entry("short", strategy.short, when = shortCond)
// if we're using the trailing stop
if (useStop)
    strategy.exit("XL", from_entry = "long", trail_points = slPoints, trail_offset = slOffset)
    strategy.exit("XS", from_entry = "short", trail_points = slPoints, trail_offset = slOffset)
// not sure needed, but just incase..
strategy.exit("XL", from_entry = "long", when = shortCond)
strategy.exit("XS", from_entry = "short", when = longCond)
// === /STRATEGY ===

Ideias Relacionadas

Love it, great work Jay
Resposta
:-1
Resposta
Hi Jay! Is it possible to insert an alert to the long/short signals?
+12 Resposta
hi @JayRogers , what part of your code is used to plot the entry/exit value under the text long/short?
+3 Resposta
how to sue in btxusd?
+2 Resposta
repaint repaint repaint...
+6 Resposta
It's a ballshit
+9 Resposta
is there a way to fix it?
Resposta
signal for short is more low and some time after, it move higher... do not use it with real money...
Resposta
useless indicator, if u want to lose money it will be perfect... You can pay me and i will tell you about Short or Long after some time...
+1 Resposta
Início Rastreador de Fundamentos Rastreador Forex Rastreador de Sinais Criptomoedas Calendário econômico Como Funciona Recursos gráficos Planos Regras da Casa Moderadores Soluções para sites e corretoras Widgets Soluções em Gráficos Obter Ajuda Solicitação de recurso Blog & Notícias FAQ Wiki Twitter
Perfil Configurações de perfil Conta e cobrança Obter Ajuda Ideias Publicadas Seguidores Seguindo Mensagens Privadas Conversa Deslogar